Scribd
Upload
11 views

Djkh Xy Calculation

The document provides specifications for a vessel, including dimensions, material properties, and pressures. It details fiberglass properties and proposed laminate thicknesses according to relevant standards. Key parameters such as internal pressure, weight, and design temperature are also included.

Uploaded by

Mohamad Alashmawy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views

Djkh Xy Calculation

The document provides specifications for a vessel, including dimensions, material properties, and pressures. It details fiberglass properties and proposed laminate thicknesses according to relevant standards. Key parameters such as internal pressure, weight, and design temperature are also included.

Uploaded by

Mohamad Alashmawy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Vessel Diameter (D) = 1.

8 m
Saddle Distance (L) = 1.3 m
Height of Cylinder (Ls) = 1.85 m
Cured Resin density (ρ F ) = 1140 kg/m3
Resin HDT = 150 °C
Density of Content (ρ F ) = 1000 kg/m3
Laminate Density = 1600 kg/m3
Width of Saddle (b1) = 0.25 m
Laminate Flexural Modulus Eɸb 3800 Mpa
Laminate Axial Modulus Ex = 1725 Mpa

Fiberglass properties (Table 3

Fiberglass Type CSM WR

mass per layer(m) = 0.45 0.6

ultimate tensile strength (ui)= 200 600

unit Tensile Modulus (Xi)= 14000 16000

Proposed

CSM WR
tc = 2 1.1
n= 4 2
m= 0.45 0.6
mz= 1.8 1.2

tn = 3.6 1.32

t=
Internal Pressure (PSop) = 51
Hydrostatic Pressure (Php) = 6656.92
Design Temperature (TS) = 93
Weight of Content(Wc)= 4700
Weight of Vessel (Wv) = 595.2
Wind Pressure (Pwind) = 120.2

BS EN 13121-3 2016)

CFW Unit

0.594 kg/m2

500 N/mm

28000 N/mm

Proposed laminate thickness t (BS 4994)

CFW Unit
0.75
12 layers
0.6
7.2 kg/m2

5.4 mm

10.32 mm
kg/m2
kg/m2
°C
kg
kg
kg/m2

Remarks
thickness constant,figure 5
No. of layers

mz=n x m,mass of each layer

tn=(mz)(tc)thickness of each laminate

overall thickness of laminate

You might also like