Document No Issue Index

D5A-T RC 1500
21376860 01
General
Number of cylinders 4
Displacement, total 4,76 liters [290,7 cu. in]
Firing order 1-3-4-2
Bore 108 mm [4,25 in]
Stroke mm 130 mm [5,12 in]
Compression ratio 17,6:1
Overload
Performance 25% load 50% load 75% load 100% load 110% load
ISO Standard Power 77 kW [105 hp] 19,3 38,5 57,8 77 84,7
Torque 490 Nm [362 lbf ft] 118 239 363 490 542
Mean piston speed 6,5 m/s [21,3 ft/sec]
Effective mean pressure 1,29 Mpa [187 psi] 0,3 0,6 1,0 1,3 1,4
Max combustion pressure Mpa [psi] 7,1 8,1 9,4 10,7 11,2

Engine noise emission

Measured sound power Lw at no load 85,5 dB(A)
Measured sound power Lw dB(A) 88,5

Unsilenced exhaust noise emission

Data calculated as sound pressure Lp. Assumed microphone distance 1m. dB(A) 107

Lubrication system
Lubricating oil consumption at ISO Standard Power liter/h [US Gal/h] 0,05
Lubricating oil system capacity including std. filters liters [US Gal] 13
Lubricating oil system capacity including classified (twin) filters liters [US Gal] 16

Fuel system
Specific fuel consumption g/kWh [lb/hph] 255 219 217 222 225
Total fuel flow liter/h [US Gal/h] 375
Maximum return flow liter/h [US Gal/h]
Feed pump pressure kPa [in H2 O] 500
Feed pump max suction head m 1
Max allowable back pressure in fuel return line kPa [H2 O] 50

2
 Document No Issue Index
D5A-T RC 1500
21376860 01

Intake system
Air consumption, (at 27oC) m3/min [cu.ft/min] 3,7 4,02 4,5 5,1 5,4
Max permissible air intake restriction kPa [in H2 O] 2,5

Exhaust system
Heat rejection to exhaust kW [BTU/min] 13,9 22,7 35 49 54,5
Exhaust gas temperature after turbine oC [oF] 210 300 385 455 480
Max allowable back pressure in exhaust line kPa [H2 O] 3
Exhaust gas flow at Exhaust gas temperature after turbine m3/min [cu.ft/min] 6,6 8,6 11,2 14,1 15,2

Heat rejection the surrounding

Heat rej. from engine to surrounding kW [BTU/min] 2,3 3,3 4,2 5,7 6,4

Cooling water circuit

Heat rejection to water kW [BTU/min] 23 35,9 52,3 71,8 81,4
Pressure cap setting on standard radiator 75 kPa [301 in H2O]
Maximum top tank temperature 103 °C [217°F]
Shutdown switch setting 103 °C [217°F]
Thermostat, fully open 95 oC [176 oF]
Cooling water flow at fully open thermostat m3/h [cu.ft/h] 9,5
Engine coolant capacity incl radiator 32 liters [8.5 US gal]
AOT ?? °C
??? °F
Power take off
Look in technical data for propulsion

Power Standards
The engine performance corresponds to ISO 3046, BS 5514, DIN 6271 and in general SAE J 1349. The technical data applies to an engine operation on a fuel with
calorific value of 42,7 MJ/ kg (18360 BTU/ lb) and a density of 0,84 kg/ liters (7,01 lb/ US gal, 8,42 lb/Imp gal), also where this involves a deviation from the standards.
Engine speed governor in accordance with ISO 3046/IV, class A1 and ISO 8528-5 G2 (G3 with electronic speed governor).
Rating Guidlines
ISO Standard Power for continuous operation with 10% overload capability for 1 hour of 12.