Scribd
Upload
70 views

r10-iclass-se-express-reader-manual

The HID R10 iCLASS SE Express Reader Installation Guide provides detailed instructions for installation, including supplied and recommended parts, specifications, and optional features. It outlines the steps for mounting, wiring, and testing the reader, as well as safety precautions and tamper features. The guide emphasizes that specifications are subject to change and includes references for additional resources.

Uploaded by

Adriano Costa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views

r10-iclass-se-express-reader-manual

The HID R10 iCLASS SE Express Reader Installation Guide provides detailed instructions for installation, including supplied and recommended parts, specifications, and optional features. It outlines the steps for mounting, wiring, and testing the reader, as well as safety precautions and tamper features. The guide emphasizes that specifications are subject to change and includes references for additional resources.

Uploaded by

Adriano Costa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Manuals+ — User Manuals Simplified.

HID R10 iCLASS SE Express Reader Installation Guide

Home » HID » HID R10 iCLASS SE Express Reader Installation Guide

HID R10 iCLASS SE Express Reader Installation Guide


Contents
1 Supplied parts
2 Recommended parts (not
supplied)
3 Specifications
4 Optional Features
5 Installation
6 Mount the backplate
7 Wire the reader
8 Secure the reader to the backplate
9 Power and test the reader
10 Documents / Resources
10.1 References

Supplied parts

iCLASS SE Express R10 Reader (1)


Installation Guide (1)
0.138-20 x 1.5″ self tapping screws (2) – for installing the reader directly to a wall
0.138-32 x 0.375″ screws (3) – for mounting to an enclosure with Imperial (US) threads (2) and attaching the
reader to the back plate (1)
M3.5 x 12mm screws (2) – for mounting to an enclosure with Metric (EU etc) threads
0.138-32 x 0.375″ security screw (1) – alternative security screw for attaching the reader to the back plate

Recommended parts (not supplied)

Cable, 5-9 conductor (Wiegand or Clock-and-Data)


Certified LPS DC power supply
Security tool HID 04-0001-03 (for anti-tamper screw)
Drill with various bits for mounting hardware
Mounting hardware
Reader spacer (PN: 6132AKB) when mounting on or near metal or metal junction boxes – see How to Order
Guide
IP65 Mounting gasket (PN: IP65GSKT-R10, 10 pcs per kit), recommended for outdoor installation

Specifications
INPUT VOLTAGE (VDC) 12 VDC

CURRENT

STANDBY AVG1 46 mA

MAX AVG2 60 mA

PEAK3 250 mA

OPERATING TEMPERATURE -30° F to 150° F (-35° C to 66° C)

CABLE LENGTH4 Communication Lines (Wiegand)22 AWG: 500 ft (152 m)

REGULATORY REF NUMBER R10FKNN

FREQUENCY BLE: 2.4 – 2.480 GHzHF: 13.56 MHz

FCC & IC IDS FCC-ID: JQ6-iCLASSR10F IC-ID: 2236B-ICLASSR10F

1. Standby AVG – RMS current draw without a card in the RF field.


2. Maximum AVG – RMS current draw during continuous card reads. Not evaluated by UL.
3. Peak – highest instantaneous current draw during RF communication.
4. Wiegand Cable Lengths: 500 ft (152 m) 22 AWG @ STANDBY AVG 46 mA, MAX AVG 62.5 mA, PEAK 250 mA

Optional Features

Optical Tamper enabled by default – Once activated, when the mounting plate is removed, the optical tamper
will
open the circuit between Tamper#1 and Tamper#2 reader control lines. Tamper#1 and Tamper#2 control lines are
interchangeable. Either of these lines can be connected with the reader ground line to reduce the number of cable
cores required in the reader cable. Tamper#1 and Tamper#2 are rated 0-12VDC at 100mA.

Configuration Cards – The reader can be modified to meet the specific requirements of an installation.
Configuration options include; audio visual, and CSN outputs. See the HID Reader Manager™ solution on
www.hidglobal.com for further details.

This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this
summary. Company, product names and data used in sample output are fictitious. Specifications are subject to
change without notice. © 2018 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may
not be reproduced, disseminated or republished in any form without the prior written permission of HID Global
Corporation. HID GLOBAL, HID, the HID Brick logo, the Chain Design, HID Reader Manager, HID Mobile Access,
and iCLASS SE are trademarks or registered trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the
US and other countries and may not be used without permission. All other trademarks, service marks, and product
or service names are trademarks or registered trademarks of their respective owners.

Installation

Mount the backplate

ATTENTION
Observe precautions for handling ELECTROSTATIC SENSITIVE DEVICES
Mounting directly to the wall/mullion mount

Use supplied 0.138-20 x 1.5″ screws


Mounting to an enclosure (not supplied)

For Imperial (US):


Use supplied 0.138-32 x 0.375″ screws
For Metric (EU etc):
Use supplied M3.5 x 12mm screws
Wire the reader

PIGTAIL DESCRIPTION

Yellow Beeper Input

Orange LED Input (GRN)

Black Ground (GRN)

Red +VDC

Drain Unused

Violet *Tamper #1

Violet/White *Tamper #2

White Wiegand Data 1

Green Wiegand Data 0

Tamper Output. When activated or when the reader is unpowered, the circuit between Tamper#1 and Tamper#2
reader control lines will open.
Note: Wiring the reader incorrectly may permanently damage the reader.

Secure the reader to the backplate


1. Align the top of the reader with the top of the backplate.
2. Hook the top of the reader on the top of the backplate.
3. Align the bottom of reader with the bottom of the backplate.
4. Secure the reader to the backplate using one of the supplied screws:

Security/non-tamper screw: 0.138-32 x 0.375″ screw (supplied)


Non-security/standard screw: 0.138-32 x 0.375″ screw (supplied)

Power and test the reader


Turn on the power. The reader should beep and the light bar should flash.

Test the reader with a card. The buzzer should beep and the LED should flash.
Documents / Resources

HID R10 iCLASS SE Express Reader [pdf] Installation Guide


PLT-03681, R10FKNN, R10 iCLASS SE Express Reader, R10, iCLASS SE Express Reader, S
E Express Reader, Express Reader, Reader

References

Leading Global Immigration Law Firm | BAL Immigration Law


Powering Trusted Identities of the World’s People, Places and Things | HID Global
Certifications | HID Global
User Manual

Manuals+, Privacy Policy

You might also like