Scribd
Upload
55 views2 pages

LD Lamination 7 MFI - Basell NA204000

Petrothene NA204000 is a low-density polyethylene resin suitable for extrusion coating and injection molding, known for its high speed and lightweight characteristics. It is primarily used in flexible and rigid packaging applications, providing excellent adhesion, heat sealing, and dimensional stability. The product is commercially active in North America and complies with regulatory standards as detailed in the associated Product Stewardship Bulletin and Safety Data Sheet.

Uploaded by

Naren
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views2 pages

LD Lamination 7 MFI - Basell NA204000

Petrothene NA204000 is a low-density polyethylene resin suitable for extrusion coating and injection molding, known for its high speed and lightweight characteristics. It is primarily used in flexible and rigid packaging applications, providing excellent adhesion, heat sealing, and dimensional stability. The product is commercially active in North America and complies with regulatory standards as detailed in the associated Product Stewardship Bulletin and Safety Data Sheet.

Uploaded by

Naren
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet

Petrothene NA204000
Low Density Polyethylene

Product Description
Petrothene NA204000 is selected by customers for use in both extrusion coating and injection molding
applications. NA204000 is a high speed, lightweight coating resin for use with paper, films and other base stocks.
This resin can be extruded at line speeds of 1200 ft/min or higher. Products made from materials coated with
NA204000 typically include general-purpose flexible packaging and snack food packaging. NA204000 yields
excellent adhesion and heat sealing characteristics and low neck-in. When NA204000 is used in injection
molding applications, it exhibits an excellent balance of toughness and softness, with excellent dimensional
stability. Typical injection molding applications include housewares, toys, containers and novelty items.
Regulatory Status
For regulatory compliance information, see Petrothene NA204000 Product Stewardship Bulletin (PSB) and
Safety Data Sheet (SDS).

Status Commercial: Active


Availability North America
Application Bags & Pouches; Caps & Closures; Colour Concentrates; Food Packaging Film;
Lamination Film; Sealants
Market Flexible Packaging; Rigid Packaging
Processing Method Extrusion Coating; Injection Molding

Nominal English Nominal SI


Typical Properties Value Units Value Units Test Method
Physical
Melt Flow Rate, (190 °C/2.16 kg) 7.0 g/10 min 7.0 g/10 min ASTM D1238
Density, (23 °C) 0.918 g/cm³ 0.918 g/cm³ ASTM D1505
Mechanical
Flexural Modulus, (1% Secant) 31900 psi 233 MPa ASTM D790
Tensile Strength at Break 1730 psi 12.1 MPa ASTM D638
Tensile Strength at Yield 1430 psi 10.1 MPa ASTM D638
Tensile Elongation at Break 550 % 550 % ASTM D638
Tensile Elongation at Yield 19 % 19 % ASTM D638
Hardness
Shore Hardness, (Shore D) 50 50 ASTM D2240
Thermal
Vicat Softening Temperature 186 °F 86 °C ASTM D1525
Processing Parameters
Melt Temperature <=625 °F <=329 °C

LyondellBasell Petrothene NA204000


Technical Data Sheet Recipient Tracking #:
Date: 7/14/2023 Page 1 of 2 Request #: 4456453
Notes
Tensile properties were run with a crosshead speed of 20 inches/min or 500 mm/min.
Flexural Modulus properties were run with a crosshead speed of 0.5 inches/min or 12.5 mm/min.
Mechanical tensile properties were run on a Type IV specimen.
These are typical property values not to be construed as specification limits.
Processing Techniques
Specific recommendations for resin type and processing conditions can only be made when the end use,
required properties and fabrication equipment are known.
Company Information

For further information regarding the LyondellBasell company, please visit http://www.lyb.com/.

© LyondellBasell Industries Holdings, B.V. 2018


Disclaimer

Information in this document is accurate to the best of our knowledge at the date of publication. The document is
designed to provide users general information for safe handling, use, processing, storage, transportation,
disposal and release and does not constitute any warranty or quality specification, either express or implied,
including any warranty of merchantability or fitness for any particular purpose. Users shall determine whether the
product is suitable for their use and can be used safely and legally.

In addition to any prohibitions of use specifically noted in this document, LyondellBasell may further prohibit or
restrict the sale of its products into certain applications. For further information, please contact a LyondellBasell
representative.
Trademarks

The Trademark referenced within the product name is owned or used by the LyondellBasell family of companies.

LyondellBasell Petrothene NA204000


Technical Data Sheet Recipient Tracking #:
Date: 7/14/2023 Page 2 of 2 Request #: 4456453

You might also like