M55 Pro-Vibraphone

E3645S Motor and control assy

E36191 Motor w/connector
E3634 Motor control unit
E3617 ON/OFF switch
E3617 solders onto pc board or solder on lead wires.
E3632 Small potentiometer
E3626 Control box mounting bracket
E3178 Old style Bodine motor
E3630 Speed control knob

E3465 Resonator and pulsator assembly, plain

E3466 Resonator and pulsator assembly, sharp E3631 Motor Pulley
E0412 Motor mounting ring
E0407 Vibe motor belt
5 3/4" dia. (18.06" long)

E3497 Belt Cover plate

E3463 Pulsator shaft assembly, plain

E3464 Pulsator shaft assembly, sharp
E3154 Low end bearing bracket w/o nyliner
E3156 Center bearing bracket w/o nyliner
E3155 High end bearing bracket w/o nyliner
E3157 Nyliner
E4065 Resonator rubber (4 per inst) low end only
E4061 Resonator plate (4 per inst) low end only
E33281 Pulsator shaft pulley
M55 parts, cont.

E50380050 M55 Frame w/hardware & motor

E50380040 M55 Frame w/hardware- no motor
(comes with damper bar installed) E3486 Lower crossbar with diagonal braces.
E3791 Node wire, plain A E34801 Low end leg brace
E3792 Node wire, sharp B E94567 Low end crossbar brace
C E94568 High end crossbar brace
D E34811 High end leg brace
E4491 Add on carrier bracket
E2590 1/4-20 wing nut
Tops of diagonal braces connect to E4491 bracket
with E2590 wing nut
This crossbar will work on models made after 1980,
and earlier models with some modifications.

E38605 LE adj ht leg assy

E38615 HE adj ht leg assy
order leg extensions and casters separately
E6161 5/16-18 Plastic knob
To convert to adj ht legs, order: E9784 5/16-18 Thru-knob
qty Part ## description E6160 Leg extension
1 E38615 HE leg assy E0140 Exp stem caster, plain (adj ht)
1 E38605 LE leg assy E0141 Exp stem caster, brake (adj ht)
4 E6160 Leg extension E0135 Exp stem caster, plain (fixed ht)
2 E0140 Caster, plain E0136 Exp stem caster, brake (fixed ht)
2 E0141 Caster, brake
4 E6161 Knob w/ stud
4 E9784 Thru hole knob
2 E9520 Velcro strap 16"

E0900T Saddle post (10 pk) E0901T Hook Post (10 pk)
40 per instrument 40 per instrument

E0905 End post E0912 End post

E0300T Post insulator (10 pk) 4 per instrument 4 per instrument
88 per instrument Used on rails 1 & 4 Used on rails 2 & 3
M55 parts, cont

E3200 Damper bar assembly

E3215 Eye hook 1/4 20 x 2"
E2455 Hex nut 1/4 20
E3476 Low end damper arm E3202 Damper stud
E3272 Mounting clip for E3476
E3477 High end damper arm
E3217 Mounting clip for E3477

E3279 Damper felt 1/2" X 1 1/2" X 51"

E94965 Pedal assy w/lower plrd (after 1/2/01)

E94963 Pedal assy w/lower plrd (before 1/2/01)
E9784 Thru knob to secure to crossbar (after 1/2/01)
E3474 Upper pull rod

E32261 Lower pullrod only

E9487 Adjustment knob

E32111 Damper Spring

E3952 Damper spring bracket
E37761FUL Full set of bars for M55 tuned to A=442
E37761FULW0 Full set of bars for M55 tuned to A=440
Standard tuning changed from A=440 to A=442 on 1/1/94
E37761xxx Individual bars for M55
(Ex: Middle C = E37761CN4, 1/2 step up is E37761CS4)

E32031 Damper adjustment nut

E3206 Felt washer

E1902V Cord Spring (2 pk)

Order 2 packs for one instrument
E4441V Bar cord E2477 Wing nut for damper spring
Order 1 pack for one instrument Rev 2/15/07