Scribd
Upload
12 views

WI - Sports Direct

This document outlines special inspection instructions for Sports Direct, detailing requirements for goods inspection, including packing, measurement, labeling, and shipping marks. It specifies acceptable tolerances for shipment quantities and color differences, along with guidelines for visual quality checks and documentation. The report format and signature requirements for inspectors and reviewers are also included.

Uploaded by

zeeshan ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views

WI - Sports Direct

This document outlines special inspection instructions for Sports Direct, detailing requirements for goods inspection, including packing, measurement, labeling, and shipping marks. It specifies acceptable tolerances for shipment quantities and color differences, along with guidelines for visual quality checks and documentation. The report format and signature requirements for inspectors and reviewers are also included.

Uploaded by

zeeshan ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

INSPECTION DIVISION WORK INSTRUCTION

Doc Rev No.: 0


Client: Sports Direct Date: 18-1-2022

Title Special Instructions


1. For FRI 100% of goods finished the production and at least 80% of the shipment
quantity packed.
Quantity 2. Short or over shipment within 5% against order is accepted.
3. If the available / completely packed quantity is insufficient for inspection will be
(ABORT),
1. Reference Samples and QC file will be available which is provided by the client to
factory.
2. Reference QA / QC folder
Style/Color/
Hand Feel
3. Put the “Production sample” and “Submitted sample” label together with the
product for identification.
4. For Colour shade difference b/w submitted/approval sample, gray scale 4-5 is the
maximum tolerance report the actual finding & ‘’not conformed’’ the shipment.
1. General Inspection Level II.
2. AQL for Major & 2.5 For Minor 4.0
3. Inspection distance for visual quality check should be B/W 24 to 30 Inches away
from the eyes.
Workmanship 4. Check inside / outside garment appearance and workmanship for visual
5. CARTON SELECTION
- Number of carton sampling at least: Total Cartons
- Number of carton sampling for re-inspection at least: TotalCartons x 1.5
DCL Follow Intertek General DCL
Size 1. Yes 3 pcs per size & covered full colorway
Measurement
Size 1. Follow tolerance from client provided Size specification sheet/ tech pack .
Measurement
(Tolerance
Criteria)
1. The pull test must be checked for the baby & children’s clothing or required by the
Data
applicant 2 samples per style.
Measurement
2. Carton Dimension & Weight check : 2 cartons randomly
1. All sticker, label, bar code, etc. check against client provided manual and to be
Labeling/ applied at correct position / orientation.
Packing 2. Assortment check Total quantity packed into carton against shipping mark or/and
PO.
1. Barcode check level S-3, but at least 1 piece per color per size to be checked on the
product and packaging.
2. Shipping marks of outer carton and inner pack shall be check against client provided
Shipping Mark manual for PO number, item number, assortment number, destination, quantity,
size, color, special markings, etc.
3. No content on the shipping mark will be covered by label, sticker, tape, wrapping
strap, etc.
Important N/A
Instructions

Page 1 of 2
Image 1. Use general criteria
requirement 2. Photo with inspection date
Report format Follow Intertek General Report Format
Uploading Not required
requirement

Inspector Signature: ________________ Report Reviewer Signature: _____________

Technical Coordinator Signature: ___________ Supervisor Signature: ______________

Page 2 of 2

You might also like