Scribd
Upload
24 views

ktag-k-tag-ecu-programming-tool-faq

The KTAG ECU Programming Tool is compatible with Windows XP and Windows 7 Professional, though issues may arise with certain versions of Windows 7. It has no usage limit, but frequent writing of map files may lead to a limit of approximately 500 uses. Common errors include communication and checksum errors, which can often be resolved by checking connections or ensuring software compatibility.

Uploaded by

marco marquez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views

ktag-k-tag-ecu-programming-tool-faq

The KTAG ECU Programming Tool is compatible with Windows XP and Windows 7 Professional, though issues may arise with certain versions of Windows 7. It has no usage limit, but frequent writing of map files may lead to a limit of approximately 500 uses. Common errors include communication and checksum errors, which can often be resolved by checking connections or ensuring software compatibility.

Uploaded by

marco marquez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

KTAG K-TAG ECU Programming Tool (SE80)

Q: Can I use KTAG on Windows XP?


A: KTAG is compatible with both Windows XP and WIN7, but not all WIN7 is workable,
better use WIN7 professional.

Q: Ktag “Communication error: please check power and connections – ox1008.”

A: Please check whether the car ECU is connected with the power.

Q: Does KTAG ECU programmer have limit number of times, only 32 and then throw it
away?
A: No, it has no limit you can always use it. But if you keep on giving ECU to write map file,
then it has about 500 times limit. If your KTAG has limit counter and the KTAG board is no
gluing, please contact us we will send you chip for replacement, but there are two
conditions to change chip: 1) it is our KTAG not from other sellers; 2) you are required to
know how to change the chip otherwise the KTAG will be damaged.
Q: KTAG got error "checksum error"
A: there are three reasons cause checksum error: 1) the computer operation system is not
compatible with KTAG, better use Windows XP or WIN7 professional; 2) there are some
problem with KTAG software; 3) Ktag can't work with these types of ECU at present. If
needed, please ask us for remote assistance.

Q: Do you have PDF instruction on this strip cable?


A: Sorry, we only have KTAG driver installation video tutorial and BOOT cable instruction.
1). KTAG driver installation video tutorial: click column " Video" at this page to watch or
contact us to send you.
2). BOOT cable instruction as the following shows:
From Left to Right:
1.GREEN-CAN L
2.ORANGE-VKEY
3.YELLOW-K LINE
4.ORANGE-VKEY
5. RED-VECU
6.BLACK-GND
7.BLACK-GND
8.PURPLE-VPP
9.RED-VECU
10.WHITE-CAN H

You might also like