Scribd
Upload
14 views

EC6_2_ReleaseNotes_P638_eTask

The document outlines important firmware update instructions, specifically warning against downgrading from EC 5.0 or later to EC 4.0, which can cause a non-clearable service error. It details the new features and improvements in the latest firmware version EC6.3, including security fixes and various field issues addressed. Additionally, it provides specific code levels for different devices and emphasizes that downgrading firmware is not officially supported.

Uploaded by

edinbotic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
14 views

EC6_2_ReleaseNotes_P638_eTask

The document outlines important firmware update instructions, specifically warning against downgrading from EC 5.0 or later to EC 4.0, which can cause a non-clearable service error. It details the new features and improvements in the latest firmware version EC6.3, including security fixes and various field issues addressed. Additionally, it provides specific code levels for different devices and emphasizes that downgrading firmware is not officially supported.

Uploaded by

edinbotic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

READ THIS FIRST!

Due to changes in EC4.0 and EC5.0, do NOT downgrade firmware from EC 5.0 or later
directly to EC 4.0 based code. The code levels would look something like
LW40.xx.P440. Basically, anything that conforms to the following pattern:
LW40.XX.P4xx. This will cause a non-clearable 900 Service error. You will need to
contact the TSC for instructions on how to clear this error.

This includes installing a DLE with EC 4.0 code into a device that currently has EC
5.0 or later code.

Code levels earlier than EC4.0 can be sent to EC5 level devices without causing a
service error.

To downgrade EC6 code to an EC4.0 level, you must first load an EC4.1 based code.
This would follow the pattern LW41.XX.P4xx. Once the device is at an EC4.1 level,
EC4.0 code can be sent.

According to the firmware FAQ posted on our support site, we do not officially
support downgrading firmware. This is the reason we do not support it, even though
we go to great efforts to prevent these kinds of events from happening, sometimes
it is unavoidable. We are sorry for the inconvenience.

CUSTOMER RELEASE NOTES


Base Firmware EC6.3, LW63.xx.P636, for the following devices:
Changes since EC5.0 LW50.xx.P543

MS810e (4.3� eTask): LW63.DN4.P638


MS812e (7.0� eTask): LW63.DN7.P638
MX71X,MX81X series: LW63.TU.P638

MS610de (4.3� eTask): LW63.PR4.P638

MX410/510/511 (4.3� eTask): LW63.SB4.P638


MX610, MX611 (7.0� eTask): LW63.SB7.P638

CS510 (4.3� eTask): LW32.VY4.P638

CX410 (4.3� eTask): LW63.GM4.P638


CX510 (7.0� eTask): LW63.GM7.P638

MS91x Series: LW63.SA.P638

MX91x Series: LW63.MG.P638

MX6500e LW63.JD.P638

New features:
- AirPrint Scan
- AirPrint Fax
- Google Cloud Print native
- Mopria 1.3
- Windows 10 support
- 508 Kit improvements
- 5 GHz wireless
- Sleep-Print-Sleep
- 600 DPI color scan support for Letter/A4 ( with optional DIMM installed)
- Event Log Summary report via EWS

Pre-installed apps:
- EcoSettings app - v3.0.11 (4.3" op panels) and v3.5.9 (7" op panel)
- Background and Idle Screen app - v3.11.0
- Forms and Favorites app - v4.3.0 (for 7" & 10" op panels) and v3.3.0 (for 4.3" op
panels)
- Scan to Network app - v4.8.8
- Card Copy app - v2.12.0
- Multi Send app - v2.6.2
- My Shortcut app - v1.6.1
- SNF Premium - v4.8.4 (MX6500e only)
- Barcode Discovery app - v1.1.7 (MX6500e only)
- Scan to Sharepoint app - v2.15.0 (MX6500e only)
- ADF Card Copy app - v1.2.0 (MX6500e only)

Security Issues Addressed:


- Fixed Logjam vulnerability in Diffie-Helman key exchange (CVE-2015-4000 )
- Fixed glibc getaddrinfo stack-based buffer overflow ( CVE -2015-7547 )

Field Issues Addressed and Other Improvements:


- Fixed memory leak caused by certain DNS queries
- Fixed printing issue using Google Cloud Print when no internet connection is
available
- Fixed duplex printing issue when different sides have different resolutions
(MS610de, MX410, MX510/511 and MX610/611 only )
- Fixed memory leak caused by certain DNS queries
- Fixed printing issue using Google Cloud Print when no internet connection is
available
- Fixed duplex printing issue when different sides have different resolutions
- Updated java certificates for Scan Profile and Remote Operator Panel applets
- Added support for 802.1x protocol PEAPv1 for both wired and wireless connections
- Improved stability of MVE and LDD communication
- Various improvements and fixes for network connections
- Various font fixes for missing characters/crashes
- Various fixes for PDF test cases giving crashes, syntax errors, missing pages,
and/or slow performance
- Various fixes for PCL/PCLXL test cases giving crashes, syntax errors, and/or slow
performance
- Various fixes for PS test cases giving crashes, syntax errors, and/or slow
performance
- Various changes/fixes for DBCS language support
- Various changes to translations
- Various UI changes, including some remote op panel fixes
- Various fixes for Fax
- Various fixes for eSF app handling
- Improved support for CAC card
- Improved error handling for media requests
- Improved PDF performance
- Addressed several FoIP issues
- Added Punch and Staple support for Folio ( MS91x / MX91x devices )
- No longer requires a service call for transient errors ( MS91x / MX91x devices )
- Added support for new fiber card
- Fixed issue where scan will be shrunk about 1/4 of an inch at the bottom
- Addressed issue that sometimes prevented flashing
- Addressed a WiFi-Direct, WFD, issue whne there isn't an infrastructure connection
- Addressed an issue with Auto Size Sense/Match in which the device would prompt
incorrectly.

Engine Code Release Notes:


Engine Code Release Notes:
- For FDN.DN.E715/FDN.TU.E715 (MS710 and MS810 SFP series and MX710 and MX810 MFP
series devices)
Changes in Engine Firmware since FDN.DN.E709

Field Issues and Fixes


- Added additional printer settings information to sysdebug report.
- Fixed an issue that can cause a 242.32, 243.32, 244.32, or 245.32 on the
first page of a job.
- Added capability via diagnostic engine settings to reduce finishing gap
when offsetting.

- For FDN.PIR.641 for MS310/MS410/MS510/MS610/MX310/MX410/MX510/MX610/MX611


Devices
Changes in Printer Engine Firmware since FDN.PIR.E618

Functional Enhancements
- Reduced the Advance Start timeout from 15 seconds to 5

Field Issues and Fixes


- Addressed a potential collation issue when sending a mixture of stapled
and non-stapled jobs to an MX61x with a finisher option installed
- Addressed issue in Safe Mode to allow simplex printing when duplex sensor
is found to be defective rather than posting a 230.01 duplex jam

- For FDN.VY.E601 for CX510, CX410, CX310, CS510, CS410, and CS310 series Devices
Changes in Printer Firmware since FDN.VY.E501

Field Issues and Fixes


- Fixed an issue that caused toner development during runout
- Fixed several occurrences of 121.16 service fuser errors
- Fixed an issue causing bad toner transfer at the bottom of the page

You might also like