Let’s take

a deep breath!

Commercial Kitchen Exhaust

Air Treatment System

ELX SERIES
ESPAIR Smoke-eater ELX Series
A well engineered Solution for
Commercial Kitchens

Air quality is become a major concern; therefore The ESPAIR Smoke-eater is ideal solution for the
Commercial kitchens need to treat the air emitted removal of grease and smoke from commercial
from cooking processes before exhausting into cooking plumes. These systems work on the
ambient. They require complying with the increasing principles of “electrostatic precipitation” and are
demands of environmental control agencies apart very efficient in getting rid of smoke, grease, mist
from addressing the concerns of neighbors and and other particulate matters keeping pressure drop
property owners. as minimal.

ESPAIR Smoke-eater ELX Series, the Right Solution

www.espair.co.in
The Product... Description
Prefilter, Electrostatic Cell and Postfilter
are placed in series within an all metal
housing. Contaminated air is drawn by the
blower (external) through washable metal
mesh pre-filter which traps large dust
particles.Thereafter it passes through
How Electrostatic Precipitators
Electrostatic cell which traps fine particulate
Work... matter like oil, smoke and grease, then it
exits inline through Postfilter. The solid
Dirty Air Clean Air contaminants are held on electrostatic
cell until they are washed off. Liquid
Pre-Filter Ionizer Collector
contaminants are collected in the bottom
As air enters the filter, the particles pass tray and can be drained out. All internals can
through a high intensity electrical field that be slide out through Side access door for
imparts an electrical charge to the particles, periodic cleaning. Control Box is mounted on
which range in size from 0.01 micron to
side access door which houses all Electrical
10 microns. The charged particles pass
components.
through a series of alternately charged
collector plates. Particles are repelled by plates
with the same polarity and attracted to plates
with opposite polarity — similar to how a
powerful magnet works.
Collec�on plate

Clean
air

Pre-Filter
Precipitated
(collected)
par�cles
Posi�vely
charged
par�cles
Uncharged Ionizer
par�cles (to charge par�cles)

CROSS SECTION

www.espair.co.in
 Technicals...

ELX-1 ELX-2 ELX-3

ELX-4 ELX-5

Parameters ELX-1 ELX-2 ELX-3 ELX-4 ELX-5

Unit Size (HxWxL) - in mm 565x665x620 565x1165x620 565x1670x620 565x2170x620 565x2670x620
MOC 1.6 mm thick Galvanized Steel
Finishing 3 mil thick Polyester Powder Coated
Weight 58 92 126 161 195
Air Volume (Nominal) - Cfm 1700 3400 5100 6800 8500
Air Volume (Max) - Cfm 2100 4200 6300 8400 10500
Airflow Direc�on Right to Le� / Le� to Right
Sta�c Pressure Drop 50 pa / 0.2”
Safety *Auto power cut-off when access door is opened. *Mechanical Main Swith interlock for Electrical Panel Power shuff-off
Efficiency *DOP Test- upto 95% single pass & upto 99% double pass. *ASHRAE 52.2-2012- upto 97% single pass & upto 99% double pass.
*NIOSH 5026 OIL MIST FIELD TEST : UP TO 97%. *MERV Ra�ngs Meets MERV 15.
Par�cle Size Par�cle size From 0.01 microns - 10 microns
No. of Cell 1 2 3 4 5
Size of Electrosta�c Cell 480x500x342 mm
Weight of Electrosta�c Cell 16 kg
Type of Ionizer Stainless Steel Double side Spiked Blade Ionizer
Prefilter Aluminum wire mesh, Washable
No. of Prefilters 1 2 3 4 5
A�erfilter (Op�onal) 5 Ply Aluminum wire mesh Panel Type, Washable or Ac�vated Carbon Honeycomb Filter
No. of A�erfilters 1 2 3 4 5
Input Voltage/Frequency 200-260VAC/50-60Hz.
Rated Input Current/Wa�age 480mA/60W 960mA/120W 960mA/120W 1.60A/200W 1.60A/200W
HV-SMPS - Output Voltage Dual output. 12KVDC for Ioniser/6KVDC for Collector. Posi�ve Polarity (Default). ± 10% output voltage adjustment using a poten�ometer
HV-SMPS - Output Power 45W 80W 115W 155W 190W
HV-SMPS - Output Metering (Op�onal) Actual output voltage & current measurement readouts to be provided in terms of 0 to 5V / 0 to 2V analogue signals.
HV-SMPS - Indica�ons A poten�al free relay contacts provided for BMS/ HV Output Status Indica�on.
Short Circuit: During short circuit, the output current shall be restricted at predefined set value less than 3 �mes the rated current to avoid load cell damage.
Protec�ons Over-Current: In case load draws over-current, the output shall remain at predefined set value as similar in short circuit condi�on.
Arc/Spark Protec�on: In case of an arc or spark, output enters into hiccup mode, output be switched off momentarily & restore itself automa�cally.
Cer�fica�ons/Harmonics /EMI & EMC CE marked and with RoHS for EMI, EMC & safety guidelines. Able to suppress the major harmonics, complied to EN61000-3-2 ClassA.
Add-on Ozone UV Lamps (Op�onal) 1x40w 1x75w 2x75w 2x75w 2x90w
Installa�ons Installa�on Ceiling Suspended; Wall or Frame Mounted, Mul�ple Units Stacked

www.espair.co.in
 Systems Layout
6 5
8
7

10

2
1
9 1 1

1
Unit Dimension 1

1 Kitchen Equipments 5 Espair Smoke Eater 9 Espair Ozonia-OG

2 Cooking Plume 6 Espair Odor Remover 10 Ozone Injection Pipe
3 Exhaust Canopy (Hood) 7 Exhaust Fan
4 Metal Air Ducts 8 Clean Air

A B
Typical System Arrangements
Centerlised Mode
C

Dedicated Mode

A B C D E
ELX-1 515 620 565 150 60
ELX-2 1015 620 565 150 60
ELX-3 1520 620 565 150 60
ELX-4 2020 620 565 150 60
ELX-5 2520 620 565 150 60

www.espair.co.in
Features & Benefits

Incorporating the latest advanced technology

design and manufacturing technology,
ESPAIR ELX-series bring to the customer
even greater operational, maintenance and
Efficiency benefits.

SMOKE AND ODOR CONTROL

Components effectively remove both liquid
and solid particulate, as well as gas and odor.

HIGH EFFICIENCY CLEANING

Up to 99% efficient, per DOP & ASHRAE test
methods.

LOW PRESSURE DROP

Very low pressure drop in comparison to
media and cartridge filter, thereby saving fan
energy.

FIRE SAFE
Designed to NFPA 96 standards for kitchen
exhaust.

CONSTUCTION QUALITY
High quality construction adhering to
international standards.
PTFE INSULATOR
HEAVY DUTY ELECTROSTATIC CELL DESIGN • Increased reliability and performance.
The most durable and efficient cell design on • Prevents cracks and imperfections.
the market insures long term performance and • High surface area than standard insulators.
reliability. Highly efficient and easy to maintain
at the same time. SIMPLE TO SERVICE
Designed for easy serviceability. Like -
HIGH VOLTAGE SMPS Weldless/Jointless 50 mm deep Drain Pan and
New generation HV-SMPS based on Frequency easy access to control panel etc.
Modulation with CV & CC Loops for Uniform
Corona formation. KV and mA metering can be EASE OF INSTALLATION
offered as an option. System design makes installation simple and
requires no field assembly. Just attach your
SS SPIKED IONIZER SAWTOOTH DESIGN ductwork, electrical connection and plumbing,
Efficient Charging with unique ionizer design. and it’s done.
Unlike Wire Ionizers no problems of wire
breakage and lower corona intensity. MODULAR/SECTIONAL DESIGN
Increased system reliability and Reduces Built-up modular design allows units to be
maintenance/replacement cost. stacked to your exact requirements.

www.espair.co.in
Performance

ASHRAE 52.2-2012 Test Report

ASHRAE 52.2

ASHRAE 52.2-2012 - Ini�al Par�cle Removal Efficiency (%) and Air Resistance (inwg)
Air Velocity - FPM
Average Par�cle Size @200 @300 @500 @650 @750
E1 (0.3 – 1.0 µm) 95 95 93 92 92
E2 (1.0 – 3.0 µm) 97 97 96 95 94
E3 (3.0 – 10.0 µm) 98 98 97 96 95
Resistance - inwg 0.01 0.04 0.10 0.15 0.20

DOP Efficiency - Ini�al Par�cle Removal Efficiency (%)

Air Velocity - FPM
DOP Test

Average Par�cle Size @200 @300 @500 @650 @750

0.3 – 0.5 µm 92.0 91.4 88.5 84.9 82.4
0.5 – 0.7 µm 93.8 93.6 92.9 91.2 89.3
0.7 – 1.0 µm 95.4 94.9 93.8 92.6 91.2
1.0 – 2.0 µm 96.3 95.5 94.5 93.4 93.1
2.0 – 5.0 µm 96.9 96.1 95.0 94.6 94.2

Other Tests
EN779 Tested for EN779 with DEHS Aerosol for 0.4 Micron
Other Tests

Par�culate Ma�ers and a�ained ra�ng equivalent to F8

NIOSH 5026 Test Field tested for this Airborn Mineral Oil Mist Test and
a�ained more than 96%
ISO 16890 Equivalent to ISO ePM1 93%
MERV Ra�ngs Equivalent to MERV 15
ASHRAE 52.1 Arrestance found to be more than 99%

www.espair.co.in
 “ Our goal is to be the market leader
with our ESPAIR® products. In addition to
our competence in development and
manufacturing, we strive for a culture
of communication and customer service,
which links your requirements with our
solutions. The promise of the ESPAIR®
sales team is to be this link - from
the first contact right to the end of

”
the project.

[email protected] | +91 8377061538

TM

Tested for ASHRAE Std.,

EN: 779-2012 and DOP Efficiency
Proudly Manufactured in India

Tested and Certified for LVT and EMC

Manufactured and Marketed by

ESPAIR LLP
Regd. Office : #219, Sector-19, Faridabad-121002 (HR), INDIA
Work : Plot No. 20, Gali No. 2, Gurukul Industrial Area, Faridabad (HR)
Tel. : +91 129 4004643, +91 9810124643, +91 9818594590
Email : [email protected], [email protected]
Web : www.espair.co.in

www.espair.co.in