Chapter 1

Introduction to Data Communication and

Computer Networks

Faisal M. Uddin Independent University Bangladesh (IUB)

Data Communication and Computer Networks : CSE 316
Data Communications

• The term telecommunication means communication at a distance.

• The word data refers to information presented in whatever form is
agreed upon by the parties creating and using the data.
• Data communications are the exchange of data between two devices
via some form of transmission medium such as a wire cable.
• The effectiveness of a data communications system depends on four
fundamental characteristics:
• Delivery
• Accuracy
• Timeliness
• Jitter
Fundamental Characteristics
Delivery:
• The system must deliver data to the correct destination.
• Data must be received by the intended device or user and only by that device or user.
Accuracy:
• The system must deliver the data accurately
• Data that have been altered in transmission and left uncorrected are unusable.
Timeliness:
• The system must deliver data in a timely manner.
• Data delivered late are useless.
• In the case of video and audio, timely delivery means delivering data as they are produced, in
the same order that they are produced, and without significant delay- this kind of delivery is
called real-time transmission.
Jitter:
• Jitter refers to the variation in the packet arrival time.
• It is the uneven delay in the delivery of audio or video packets
• For example, let us assume that video packets are sent every 30 ms. If some of the packets
arrive with 30-ms delay and others with 40-ms delay, an uneven quality in the video is the
result
Data Communication Components
A data communications system has five components:
Message
Sender
Receiver
Transmission medium
Protocol
Data Communication Components
A data communications system has five components:
Message:
• The message is the information (data) to be communicated.
• Popular forms of information include text, numbers, pictures, audio, and video.
Sender:
• The sender is the device that sends the data message.
• It can be a computer, workstation, telephone handset, video camera, and so on.
Receiver:
• The receiver is the device that receives the message.
• It can be a computer, workstation, telephone handset, television, and so on.
Data Communication Components
Transmission medium:
• The transmission medium is the physical path by which a message travels from sender to
receiver.
• Some examples of transmission media include twisted-pair wire, coaxial cable, fiber-optic
cable, and radio waves.
Protocol:
• A protocol is a set of rules that govern data communications.
• It represents an agreement between the communicating devices.
• Without a protocol, two devices may be connected but not communicating, just as a
person speaking French cannot be understood by a person who speaks only Japanese.
Data Representation
Information today comes in different forms such as text, numbers, images, audio, and video
Text
Numbers
Images
Audio
Video
Data Representation
Information today comes in different forms such as text, numbers, images, audio, and video
Text:
• In data communications, text is represented as a bit pattern, a sequence of bits (0s or 1s).
• Different sets of bit patterns have been designed to represent text symbols. Each set is
called a code.
• Today, the prevalent coding system is called Unicode, which uses 32 bits to represent a
symbol or character used in any language in the world.
Numbers:
• Number is directly converted to a binary number to simplify mathematical operations.
Images:
• Images are also represented by bit patterns.
• In its simplest form, an image is composed of a matrix of pixels (picture elements), where
each pixel is a small dot.
• The size of the pixel depends on the resolution.
• For example, an image can be divided into 1000 pixels or 10,000 pixels. In the second
case, there is a better representation of the image (better resolution), but more memory is
needed to store the image.
Data Representation
Audio:
• Audio refers to the recording or broadcasting of sound or music.
• Audio is by nature different from text, numbers, or images.
• It is continuous, not discrete.
• Even when we use a microphone to change voice or music to an electric signal,
we create a continuous signal.
Video:
• Video refers to the recording or broadcasting of a picture or movie.
• Video can either be produced as a continuous entity (e.g., by a TV camera), or it
can be a combination of images, each a discrete entity, arranged to convey the
idea of motion.
Data Flow

simplex mode

half-duplex mode

full-duplex mode (also called duplex)

Data Flow

In simplex mode, the communication is unidirectional

In half-duplex mode, each station can both transmit and receive, but not
at the same time

In full-duplex mode (also called duplex), both stations can transmit

and receive simultaneously
Networks
• A network is the interconnection of a set of devices capable of
communication.
• In this definition, a device can be a host (or an end system as it is
sometimes called) such as a large computer, desktop, laptop,
workstation, cellular phone, or security system.
• A device in this definition can also be a connecting device such as a
router, which connects the network to other networks, a switch, which
connects devices together, a modem (modulator-demodulator), which
changes the form of data, and so on.
• These devices in a network are connected using wired or wireless
transmission media such as cable or air.
• When we connect two computers at home using a plug-and-play
router, we have created a network, although very small.
Network Criteria
A network must be able to meet a certain number of criteria. The most important of
these are performance, reliability, and security
Performance:
• Performance can be measured in many ways, including transit time and response
time.
• Transit time is the amount of time required for a message to travel from one
device to another.
• Response time is the elapsed time between an inquiry and a response.
• The performance of a network depends on a number of factors, including the
number of users, the type of transmission medium, the capabilities of the
connected hardware, and the efficiency of the software.
• Performance is often evaluated by two networking metrics: throughput and delay.
• We often need more throughput and less delay.
• However, these two criteria are often contradictory.
• If we try to send more data to the network, we may increase throughput but we
increase the delay because of traffic congestion in the network.
Network Criteria

Reliability:
• In addition to accuracy of delivery, network reliability is measured by
the frequency of failure, the time it takes a link to recover from a
failure, and the network’s robustness in a catastrophe.
Security:
• Network security issues include protecting data from unauthorized
access, protecting data from damage and development, and
implementing policies and procedures for recovery from breaches and
data losses.
Physical Structures: Type of Connection
A network is two or more devices connected through links. A link is a communications pathway
that transfers data from one device to another
Point-to-Point:
• A point-to-point connection provides a dedicated link between two devices.
• The entire capacity of the link is reserved for transmission between those two devices.
Multipoint:
• A multipoint connection is one in which more than two specific devices share a single link.
• In a multipoint environment, the capacity of the channel is shared, either spatially or
temporally.
Physical Structures: Physical Topology
• The term physical topology refers to the way in which a network is laid
out physically.
• Two or more devices connect to a link; two or more links form a
topology.
• The topology of a network is the geometric representation of the
relationship of all the links and linking devices (usually called nodes) to
one another.
• There are four basic topologies possible:
• Bus Topology
• Ring Topology
• Star Topology
• Mesh Topology
• Hybrid Topology
Physical Topology: Bus

• A bus topology, is multipoint. One long cable acts as a backbone to link all
the devices in a network
Physical Topology: Bus

Advantages
• Ease of installation
• Backbone cable can be laid along the most efficient path, then connected to
the nodes by drop lines of various lengths.
Disadvantages
• Difficult reconnection and fault isolation
• Signal reflection at the taps can cause degradation in quality
• A fault or break in the bus cable stops all transmission, even between devices
on the same side of the problem. The damaged area reflects signals back in
the direction of origin, creating noise in both directions.
 Physical Topology: Star

• In a star topology, each device has a dedicated point-to-point link only to a central
controller, usually called a hub.
• The devices are not directly linked to one another.
• Unlike a mesh topology, a star topology does not allow direct traffic between
devices
Physical Topology: Star

Advantages
• A star topology is less expensive than a mesh topology.
• Easy to install and reconfigure
• Far less cabling needs to be housed
• Robustness: If one link fails, only that link is affected.
Disadvantage
• The dependency of the whole topology on one single point, the hub. If the hub
goes down, the whole system is dead.
Physical Topology: Ring
• In a ring topology, each device has a dedicated point-to-point connection with
only the two devices on either side of it.
• A signal is passed along the ring in one direction, from device to device, until it
reaches its destination.
• Each device in the ring incorporates a repeater.
• When a device receives a signal intended for another device, its repeater
regenerates the bits and passes them along
Physical Topology: Ring
Advantages
• To add or delete a device requires changing only two connections.
• Fault isolation is simplified.
• A signal is circulating at all times. If one device does not receive a signal within
a specified period, it can issue an alarm.
Disadvantages
• Unidirectional traffic
• In a simple ring, a break in the ring (such as a disable station) can disable the
entire network.
• This weakness (above) can be solved by using a dual ring or a switch capable of
closing off the break.
Physical Topology: Mesh
• In a mesh topology, every device has a dedicated point-to-point link to every
other device.
• The term dedicated means that the link carries traffic only between the two
devices it connects.
• In a mesh topology, we need n (n – 1) / 2 duplex-mode links, when number of
nodes = n
Physical Topology: Mesh
Several advantages
• The use of dedicated links
• A mesh topology is robust
• The advantage of privacy or security
• Point-to-point links make fault identification and fault isolation easy
Main disadvantages
• The amount of cabling and the number of I/O ports required
• Because every device must be connected to every other device, installation and
reconnection are difficult.
• The sheer bulk of the wiring can be greater than the available space (in walls,
ceilings, or floors) can accommodate.
• The hardware required to connect each link (I/O ports and cable) can be
prohibitively expensive.
Physical Topology: Hybrid
A hybrid topology: a star backbone with three bus networks
Network Types

• The criteria of distinguishing one type of network from another is difficult

and sometimes confusing.
• We use a few criteria such as size, geographical coverage, and ownership to
make this distinction.
• Two types of Networks:
• Local Area Network (LAN)
• Wide Area Network (WAN)
Local Area Network (LAN)
• A local area network (LAN) is usually privately owned and connects some hosts in a single
office, building, or campus.
• Depending on the needs of an organization, a LAN can be as simple as two PCs and a
printer in someone’s home office, or it can extend throughout a company and include audio and
video devices.
• Each host in a LAN has an identifier, an address, that uniquely defines the host in the
LAN.
• A packet sent by a host to another host carries both the source host’s and the destination
host’s addresses.
• In the past, all hosts in a network were
connected through a common cable,
which meant that a packet sent from one
host to another was received by all hosts.
• The intended recipient kept the packet;
the others dropped the packet.
• Today, most LANs use a smart
connecting switch, which is able to
recognize the destination address of the
packet and guide the packet to its
destination without sending it to all other
hosts.
Wide Area Network (WAN)
• A wide area network (WAN) is also an interconnection of devices capable of
communication.
• However, there are some differences between a LAN and a WAN.
• A LAN is normally limited in size, spanning an office, a building, or a campus; a
WAN has a wider geographical span, spanning a town, a state, a country, or even
the world.
• A LAN interconnects hosts; a WAN interconnects connecting devices such as
switches, routers, or modems.
• A LAN is normally privately owned by the organization that uses it.
• A WAN is normally created and run by communication companies and leased
by an organization that uses it.
• We see two distinct examples of WANs today:
• Point-to-point WANs
• Switched WANs.
Point-to-point WAN

A point-to-point WAN is a network that connects two communicating

devices through a transmission media (cable or air).
Switched
WAN
• A switched WAN is a network with more than two ends.
• A switched WAN, is used in the backbone of global communication today.
• We can say that a switched WAN is a combination of several
point-to-point WANs that are connected by switches.
 Internetwork
• It is very rare to see a LAN or a WAN in isolation; they are connected to one another
• When two or more networks are connected, they make an internetwork or
internet.
• Assume that an organization has two offices, one on the east coast and the other on
the west coast.
• Each office has a LAN that allows all employees in the office to communicate
with each other.
• To make the communication between employees at different offices possible, the
management leases a point-to-point dedicated WAN from a service provider, such
as a telephone company, and connects the two LANs.
• Now the company has an internetwork, or a private internet communication
between offices is now possible.
Internetwork
 Switching

• An internet is a switched network in which a switch connects at least

two links together.
• A switch needs to forward data from a network to another network
when required.
• The two most common types of switched networks are:
• Circuit-switched network
• Packet-switched networks
 Circuit-Switched Network

• In a circuit-switched network, a dedicated connection, called a

circuit, is always available between the two end systems.
• The switch can only make it active or inactive.
• We have used telephone sets instead of computers as an end system
because circuit switching was very common in telephone networks
in the past, although part of the telephone network today is a
packet-switched network.
Packet-Switched Network
• In a computer network, the communication between the two ends is done in
blocks of data called packets.
• In other words, instead of the continuous communication we see between two
telephone sets when they are being used, we see the exchange of individual
data packets between the two computers.
• This allows us to make the switches function for both storing and forwarding
because a packet is an independent entity that can be stored and sent later..
• A router in a packet-switched network has a queue that can store and forward
the packet.
The Internet

• An internet (note the lowercase i) is two or more networks that can

communicate with each other.
• The most notable internet is called the Internet (uppercase I), and is
composed of thousands of interconnected networks.
Accessing the Internet

• The Internet today is an internetwork that allows any user to become

part of it.
• The user, however, needs to be physically connected to an ISP.
• The physical connection is normally done through a point-to-point WAN
• Connecting to internet:
• Using Telephone Networks
• Dial-up service
• DSL Service
• Using Cable Networks
• Using Wireless Networks
• Direct Connection to the Internet
A Brief History of the Internet

• Internet has evolved from a private network to a global one in less than 40 years
• Before 1960: telegraph and telephone networks
• In 1961: The theory of packet switching for bursty traffic was first presented by Leonard
Kleinrock at MIT
• In 1967: Advanced Research Projects Agency (ARPA) in the Department of Defense
(DoD) presented, its ideas for the Advanced Research Projects Agency Network
(ARPANET), a small network of connected computers.
• In 1969: ARPANET was a reality. Four nodes, at the University of California at Los
Angeles (UCLA), the University of California at Santa Barbara (UCSB), Stanford
Research Institute (SRI), and the University of Utah, were connected
• Software called the Network Control Protocol (NCP) provided communication between
the hosts.
• In 1972, Vint Cerf and Bob Kahn outlined the protocols (TCP) to achieve end-to-end
delivery of packets.
• Shortly thereafter, authorities split TCP into two protocols:
• Transmission Control Protocol (TCP) and
• Internetworking Protocol (IP).
 Internet Today
• Today, we witness a rapid growth both in the infrastructure and new
applications.
• The Internet today is a set of pier networks that provide services to the whole
world.
• What has made the Internet so popular is the invention of new applications:
• World Wide Web: The 1990s saw the explosion of Internet applications
due to the emergence of the World Wide Web (WWW). The Web was
invented at CERN by Tim Berners-Lee. This invention has added the
commercial applications to the Internet.
• Multimedia: Recent developments in the multimedia applications such as
voice over IP (telephony), video over IP (Skype), view sharing
(YouTube), and television over IP (Willow TV) has increased the number
of users and the amount of time each user spends on the network.
• Peer-to-Peer Applications: Peer-to-peer networking is also a new area of
communication with a lot of potential.
Protocols
• An entity is anything capable of sending or receiving
information.
• A protocol defines what is communicated, how it is
communicated, and when it is communicated.
• Syntax
• Refers to the structure or format of the data, meaning the
order in which they are presented.
• Semantics
• Refers to the meaning of each section of bits.
• Timing
• When data should be sent and how fast they can be sent.
Standards
• De facto standards
• de facto means “by fact” or “by convention”
• De jure standards
• De jure means “by law” or “by regulation”
• Standard organizations
• International Organization for Standardization (ISO)
• International Telecommunication Union-Telecommunication standards sector (ITU-T)
• Consultative Committee for International Telegraphy and Telephony (CCITT)
• American National Standards Institute (ANSI)
• Institute of Electrical and Electronics Engineers (IEEE)
• Electronic Industries Association (EIA)
• Government agencies
• Federal Communications Commission (FCC)
• Internet Standards
• Internet draft
• Request for Comment (RFC)
Class Assignment - C01
1. Explain the characteristics of data communication.
2. Sketch and explain the components of data communication.
3. Sketch and explain the data flow in data communication.
4. Explain the important criterias of network.
5. Sketch and explain the type of network connections.
6. Explain the topologies of network.

Rules:
● Prepare assignment within only four pages (Two A4 Sheets)
● Must have to mention Full Name:, ID, Section, Course Name in Top-right corner

Due Date: Next Class 24.02.2025

Class Assignment - C02
1. Explain the Network types, types of WAN, Internetwork and The Internet.
2. Explain the types of switching.
3. Explain the Internet Today
4. Explain the Protocols.

Rules:
● Prepare the assignment within only Four pages (Two A4 Sheets)
● Must have to mention Full Name:, ID, Section, Course Name in Top-right corner

Due Date: Next Class 24.02.2025