0% found this document useful (0 votes)
27 views66 pages

4MET 2Y

The document outlines the examination format for Marine Engineer Officer candidates focusing on Electrical, Electronic & Control Engineering, detailing instructions and sections for answering questions. It includes a variety of questions related to marine electro-technology, covering topics such as induction motors, circuit breakers, alternators, and battery systems. Additionally, it promotes the use of an app for quick access to answers and offers original books with past exam papers.

Uploaded by

vpajaykrishna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
27 views66 pages

4MET 2Y

The document outlines the examination format for Marine Engineer Officer candidates focusing on Electrical, Electronic & Control Engineering, detailing instructions and sections for answering questions. It includes a variety of questions related to marine electro-technology, covering topics such as induction motors, circuit breakers, alternators, and battery systems. Additionally, it promotes the use of an app for quick access to answers and offers original books with past exam papers.

Uploaded by

vpajaykrishna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 66

WWW.DIESELSHIP.

COM 1

NOVEMBER 2023
SR.NO.MET-2311

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2023)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices
that runs on windows | iOS | mac OS | android OS| Devices such as phones,
computers, mobiles, tablets etc.
please click here to purchase our original books. we have solved all past exam
papers of last 15 years. clean content, cad drawing with our 15 years of expertise
in maritime publishing.

SECTION – I

Q1. Explain the methods used to control the speed of a 3 Phase induction motors. Draw and Explain a
Variable Frequency Drive used for optimization of energy efficiency of auxiliary machineries on board
vessels. (16)
2019/AUG 2019/NOV 2020/FEB/Q1 2020/NOV/Q1 2021/OCT/Q2 2022/APR/Q1 2022/JUL/Q2
2023/NOV/Q1 Tra

Q2. With respect to the High Voltage power systems installation, explain the different types of circuit
breaker that are used, comparing them on merits and de-merits. Describe the theory of arc phenomenon
and the mechanism fitted to mitigate the arc. (16)
2017/SR2 2018/SR01 2018/SR06 2018/SR09 2019/JAN 2019/FEB 2019/APR 2019/JULY
2019/AUG 2019/OCT 2019/NOV 2020/FEB/Q2 2021/FEB/Q2 2022/JUL/Q1 2022/NOV/Q1 2023/NOV/Q2

Q3. What is the meant by "excitation" in an alternator? With the help of a neat diagram of brushless
alternator labelling all the important parts. explain how the excitation is achieved in a brushless
alternator. (16)
2019/AUG 2020/MAR/Q3 2020/OCT/Q2 2021/FEB/Q4 2021/OCT/Q1 2022/MAR/Q2 2022/JUN/Q4
2023/NOV/Q3

Q4. With reference to alkaline batteries used on board ship.

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
A. Describe the operation of a battery cell and state the material used; (6)
B. Describe how the cells are mounted to form a battery; (5)
C. State the advantages and disadvantages compared with lead-acid batteries. (5)
2010/SR4 2014/SR06 2018/SR12 2019/DEC 2020/FEB/Q5 2020/DEC/Q5 2021/MAR/Q5
2021/JUL/Q5 2021/DEC/Q5 2023/NOV/Q4

Q5. What is soft starting of an Induction motor? Describe with a circuit using thyristors used for soft
starting. Discuss its advantages and dis-advantages. (16)
2012/SR12 2013/SR1 2014/SR10 2015/SR03 2018/SR03 2018/SR09 2019/JAN
2019/FEB 2019/APR 2019/JULY 2019/OCT 2021/FEB/Q5 2022/JAN/Q2 2023/MAR/Q2
2023/NOV/Q5
SECTION – II
Q6. A. What are factors on which the speed of a motor depends? Discuss them for series and shunt
motors. (6)
b) Three equal resistors are connected to a three-phase system, if one resistor is removed find the
reduction in load if they are connected in (a) Star, (b) Delta. (10)
2023/NOV/Q6

Q7. A. Derive an expression for the e.m.f induced in an a.c. generator. (6)
B. A 220 V, d.c. shunt motor has an armature resistance of 0.5 ohm and an armature current of 40 A
on full load. Determine the reduction in flux necessary for a 50 per cent reduction in speed. The torque
for both conditions can be assumed to remain constant. (10)
2023/NOV/Q7

Q8. a) How do the leakage fluxes effect the operation of a transformer? How are they minimized? (6)
B. A 440 load of 400 KW at 0.8 (lagging) power factor is jointly supplied by two alternator A and B.
The KW load on A is 150 KW and the KVAr load on B is 150 KVAr (lagging). Determine the KW load on
B, the KVAr load on A, the power factor of operation on each machine and the current loading of each
machine. (10)
2023/NOV/Q8

Q9. a) What is the operational impedance of an R.C. Circuit? Describe its usefulness. (6)
B. A ring-main, 900m long, is supplied at a point A at a p.d. of 220V. At a point B, 240m from A, a
load of 45A is drawn from the main, and at a point C, 580m from A, measured in the some direction, a
load of 78A is taken from the main. If the resistance of the main (lead and return) is 0.25 ohm per
kilometre, calculate the current which will flow in each direction round the main from the supply point
A and the potential difference across the main, at the load where it is lowest. (10)
2023/NOV/Q9

Q10. A. What is back emf? Derive the relation for the back emf and the supplied voltage in terms of
armature resistance. (6)
B. Find the synchronous impedance reactance of an alternator in which a given field current produces
an armature current of 200 A on short circuit and a generated e.m.f. of 50V on open circuit. The
armature resistance is 0.1 ohm. To what induced voltage must the alternator be excited if it is to deliver
a load of 100A at a p.f of 0.8 lagging, with a terminal voltage of 200V. (10)
2023/NOV/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

JULY 2024
SR.NO. MET - 2407

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2024)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I
Q1. A. Give a brief outline of the care and maintenance that should be given to the stator and rotor of
an A.C. generator. (8)
B. Explain what is likely to occur if the driving power of one A.C. generator suddenly fails when two
generators are running in parallel. What safety devices are usually provided for such events? (8)
2014/SR8 2018/SR08 2018/SR10 2018/SR11 2019/MAR 2019/NOV 2021/JAN/Q1
2021/AUG/Q1 2022/APR/Q3 2022/OCT/Q1 2023/APR/Q1 2024/JUL/Q1

Q2. Compare methods of obtaining speed regulation of three-phase induction motors generally used in
tankers by means of:
A. Rotor resistance.
B. Cascade system.
C. Pole-changing.
Give examples where each system may be employed with advantage. (16)
2014/SR06 2014/SR08 2018/SR08 2019/DEC 2020/DEC/Q3 2021/JAN/Q5 2021/SEP/Q3
2021/DEC/Q3 2022/AUG/3 2022/OCT/Q2 2023/APR/Q2 2024/JUN/Q2 2024/JUL/Q2

Q3. A. Explain how the efficiency and regulation of a transformer can be assessed by open circuit and
short circuit tests? (8)
B. What is meant by equivalent resistance? (4)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
C. What is meant by all day transformer efficiency? (4)
2024/JUL/Q3

Q4. With reference to a 3 speed A.C. cage motor driven cargo winch:
A. Sketch a circuit diagram for a pole change motor. (8)
B. Describe how speed changes and braking are achieved. (8)
2009/SR6 2008/SR4 2007/SR8 2006/SR8 2011/SR8 2010/SR2 2010/SR1
2011/SR2 2012/SR11 2014/SR02 2014/SR08 2018/SR08 2018/SR12 2022/OCT/Q4
2023/APR/Q4 2023/JUNE/Q4 2023/SEP/Q4 2024/JUN/Q3 2024/JUL/Q4

Q5. With reference to the condition monitoring of electrical machinery:


a) State the important parameters that may be recorded. (8)
b) Explain how the parameters are measured and what defects may be revealed. (8)
2024/JUL/Q5

SECTION – II
Q6. (a) Explain the significance of the root- mean- square value of an alternating current or voltage
waveform. Define the form factor of such a wave form. (6)
(b) A total load of 8000 kW at 0.8 power factor is supplied by two alternators in parallel. One alternator
supplies 6000 kW at 0.9 power factor. Find the kVA rating of the other alternator and the power factor.
(10)
2011/SR8 2011/SR4 2011/SR7 2010/SR8 2010/SR2 2010/SR1 2012/SR4
2011/SR1 2012/SR7 2012/SR12 2013/SR08 2013/SR11 2014/SR01 2014/SR03
2015/SR03 2015/SR08 2016/SR4 2016/SR07 2018/SR04 2018/SR07 2018/SR08
2018/SR09 2018/SR11 2018/SR12 2020/JAN 2020/OCT/Q9 2020/DEC/Q6 2021/JAN/Q8
2021/FEB/Q8 2021/MAR/Q10 2021/APR/Q6 2021/SEP/Q6 2021/OCT/Q9 2021/NOV/Q6 2022/FEB/Q8
2022/MAR/Q9 2022/JUN/Q6 2023/APR/Q6 2023/JUNE/Q6 2024/JUL/Q6

Q7. A. Electric motors contain a stationary member as well as a rotating member. For each of the
following machines, identify in which part of the motor three field winding and the armature winding
are located: three phase induction motor, three phase synchronous motor, d.c. motor. (6)
B. A 220 V, d.c. shunt motor has an armature resistance of 0.5 ohm and an armature current of 40 A
on full load. Determine the reduction in flux necessary for a 50 per cent reduction in speed. The torque
for both conditions can be assumed to remain constant. (10)
2011/SR8 2010/SR2 2010/SR1 2018/SR08 2018/SR11 2018/SR12 2023/APR/Q7
2024/JUL/Q7

Q8. A. Show how the power that is transferred across the air gap of the three-phase induction motor is
represented. Explain the terms. What portion of this is useful power? (6)
B. A 440 V load of 400 kW at 0.8 (lagging) power factor is jointly supplied by two alternators A and B.
The kW load on A is 150 kW and the KVAr load on B is 150 KVAr (lagging). Determine the kW load on
B, the KVAr load on A, the power factor of operation on each machine and the current loading of each
machine. (10)
2006/7EM 2007/SR6 2006/SR1 2012/SR1 2011/SR8 2013/SR12 2014/SR02
2018/SR08 2018/SR11 2018/SR12 2022/APR/Q9 2023/APR/Q8 2024/JUL/Q8

Q9. A. Explain the preference for a 60 Hz system. Describe the dangers of running a 50 Hz system
from a 60 Hz supply. (6)
B. A ring-main, 900m long, is supplied at a point A at a p.d. of 220V. At a point B, 240m from A, a
load of 45A is drawn from the main, and at a point C, 580m from A, measured in same direction, a load
of 78A is taken from the main. If the resistance of the main (lead and return) is 0.25 ohm per kilometre,
calculate the current which will flow in each direction round the main from the supply point A and the
potential difference across the main, at the load where it is lowest. (10)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
2011/SR8 2010/SR2 2010/SR1 2018/SR08 2018/SR11 2018/SR12 2021/APR/Q7
2022/APR/Q10 2023/APR/Q9 2024/JUL/Q9

Q10. A. (i) What is direct-connected alternator? (3)


(ii) How is a direct-connected exciter arranged in an alternator? (3)
B. Find the synchronous impedance and reactance of an alternator in which a given field current
produces an armature current of 200 A on short circuit and a generated e.m.f. of 50V on open- circuit.
The armature resistance is 0.1 ohm. To what induced voltage must the alternator be excited if it is to
deliver a load of 100A at a p.f of 0.8 lagging, with a terminal voltage of 200V. (10)
2018/AUG/Q10 2023/APR/Q10 2024/JUL/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

OCTOBER 2023
SR.NO.MET-2310

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2023)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices
that runs on windows | iOS | mac OS | android OS| Devices such as phones,
computers, mobiles, tablets etc.
please click here to purchase our original books. we have solved all past exam
papers of last 15 years. clean content, cad drawing with our 15 years of expertise
in maritime publishing.

SECTION – I

Q1. With reference to the provision of a shore electrical supply to a ship:


A. Sketch an arrangement for taking A.C. shore supply and checks to be carried out prior taking shore
connection? (8)
B. Describe the method of safely connecting the arrangement sketched in (A) to the shore Supply? (8)
2009/SR7 2009/SR3 2008/SR11 2008/SR9 2007/SR4 2007/SR3 2006/SR6
2011/SR4 2010/SR8 2011/SR3 2012/SR8 2012/SR09 2014/SR03 2014/SR09
2014/SR12 2015/SR08 2015/SR10 2016/SR02 2016/SR10 2017/SRO4 2017/SRO6
2019/FEB 2021/FEB/Q1 2022/JAN/Q1 2023/OCT/Q1

Q2. With reference to electronic control systems:


A. Draw a simple block diagram for temperature control; (8)
B. Describe each component shown in the diagram in (a). (8)
2011/SR9 2010/SR8 2011/SR4 2011/SR1 2010/SR10 2010/SR3 2010/SR4
2011/SR12 2011/SR3 2012/SR09 2014/SR03 2014/SR07 2014/SR09 2015/SR08
2015/SR09 2015/SR10 2016/SR02 2016/SR10 2016/SR11 2017/SR04 2017/SR06
2017/SR09 2018/SR12 2022/SEP/Q5 2023/OCT/Q2

Q3. Diesel electric propulsion is now being chosen as the power plant for an increasingly wide variety
of vessels.

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
(a) Sketch and describe a simple layout of such an installation. (10)
(b) Explain the advantages of selecting such a plant. (6)
2023/OCT/Q3

Q4. With reference to an emergency source of electrical power in cargo ships:


A. Describe a typical power source. (6)
B. Give a typical list of essential services, which must be supplied simultaneously; (4)
C. Explain how the emergency installation can be periodically tested. (6)
2009/SR7 2008/SR9 2007/SR4 2011/SR4 2010/SR8 2011/SR1 2011/SR3
2012/SR6 2012/SR09 2013/SR6 2013/SR10 2014/SR03 2014/SR09 2015/SR02
2015/SR04 2015/SR07 2015/SR08 2015/SR10 2016/SR03 2016/SR09 2016/SR10
2017/SR1 2017/SR2 2017/SR03 2017/SR4 2017/SR06 2017/SR11 2018/SR01
2018/SR02 2018/SR04 2018/SR06 2019/FEB 2019/JUN 2019/AUG 2019/SEP
2020/FEB/Q4 2020/OCT/Q5 2023/JULY/Q2 2023/OCT/Q4

Q5. The direct online start of squirrel cage motor is used for most electrical drives on A.C. powered
ships. Describe with sketches as necessary one method of overcoming each of the following Problems:
A. High starting current. (8)
B. Low starting torque. (8)
2009/SR7 2008/SR9 2007/SR4 2011/SR4 2011/SR1 2010/SR10 2010/SR8
2011/SR3 2012/SR06 2013/SR08 2013/SR09 2013/SR10 2014/SR03 2014/SR4
2014/SR09 2014/SR12 2015/SR02 2015/SR04 2015/SR7 2015/SR08 2015/SR10
2016/SR03 2016/SR10 2017/SR1 2017/SR2 2017/SR3 2017/SR04 2017/SR06
2017/SR07 2017/SR11 2018/SR01 2018/SR02 2018/SR04 2018/SR06 2018/SR10
2019/MAR 2019/NOV 2020/JAN 2021/APR/Q3(M) 2023/JULY/Q3 2023/OCT/Q5

SECTION – II

Q6. (a). Explain the significance of the root- mean- square value of an alternating current or voltage
waveform; Define the form factor of such a wave form. (6)
(b). A total load of 8000 kW at 0.8 power factor is supplied by two alternators in parallel. One alternator
supplies 6000 kW at 0.9 power factor. Find the kVA rating of the other alternator and the power factor.
(10)
2011/SR8 2011/SR4 2011/SR7 2010/SR8 2010/SR2 2010/SR1 2012/SR4
2011/SR1 2012/SR7 2012/SR12 2013/SR08 2013/SR11 2014/SR01 2014/SR03
2015/SR03 2015/SR08 2016/SR4 2016/SR07 2018/SR04 2018/SR07 2018/SR08
2018/SR09 2018/SR11 2018/SR12 2020/JAN 2020/OCT/Q9 2020/DEC/Q6 2021/JAN/Q8
2021/FEB/Q8 2021/MAR/Q10 2021/APR/Q6 2021/SEP/Q6 2021/OCT/Q9 2021/NOV/Q6 2022/FEB/Q8
2022/MAR/Q9 2022/JUN/Q6 2023/APR/Q6 2023/JUNE/Q6

Q7. A. Sketch an arrangement showing the principal of proportional plus integral (P+I) control loop. (6)
B. Compare the series and parallel resonance circuits. Find the frequency at which the following circuit
resonates. (10)

2011/SR01 2012/SR12 2016/SR06 2017/SR04 2019/FEB 2020/OCT/Q8 2021/JAN/Q7


2021/APR/Q7 2021/OCT/Q8 2022/JAN/Q10 2022/MAR/Q8 2023/OCT/Q7

Q8. A. Explain the potential hazards if liquid-cooled transformers are used. (6)
B. What are the losses in transformers? Mention the various factors which affect these losses. In a 25
KVA, 3300/233 V, single phase transformer, the iron and full-load Cu. Losses are respectively 350 and
400 watts. Calculate the efficiency at half-full load, 0.8 power factor. (10)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
2009/SR2 2008/SR9 2007/SR4 2011/SR1 2010/SR8 2011/SR3 2012/SR12
2013/SR11 2014/SR03 2015/SR08 2019/FEB 2019/AUG 2020/FEB/Q6 2020/MAR/Q7
2020/OCT/Q7 2021/FEB/Q6 2022/MAR/Q7 2022/JUN/Q9 2023/OCT/Q8

Q9. A. List the factors that determine the starting torque of the three-phase induction motor. How does
this torque generally compare with the value of the rated torque? (6)
B. The low-voltage release of an A.C. motor-starter consists of a solenoid into which an iron plunger is
drawn against a spring. The resistance of the solenoid is 35 ohm. When connected to a 220 V, 50 Hz,
A.C. supply the current taken is at first 2A, and when the plunger is drawn into the “full-in” position the
current falls to 0.7 A. Calculate the inductance of the solenoid for both positions of the plunger, and
the maximum value of flux-linkages in weber-turns for the “full-in” position of the plunger. (10)
2009/SR7 2009/SR6 2008/SR10 2008/SR8 2008/SR4 2008/SR3 2011/SR7
2013/SR11 2011/SR1 2010/SR6 2011/SR4 2012/SR7 2012/SR12 2013/SR08
2013/SR10 2014/SR03 2015/SR03 2015/SR08 2016/SR4 2010/SR8 2014/SR01
2010/SR9 2016/SR06 2016/SR11 2017/SR07 2018/SR04 2018/SR11 2019/APR
2019/JULY 2019/OCT 2019/NOV 2020/NOV/Q9 2023/JAN/Q9 2023/JUNE/Q9 2023/OCT/Q9

Q10. A. With the aid of delta and star connection diagrams, state the basic equation from which delta
– star – delta conversion equation can be derived. (6)
B. Three batteries A, B and C have their negative terminals connected together, between the positive
terminals of A and B there is a resistor of 0.5 ohm and between B and C three is a resistor of 0.3 ohm,
(10)
i. Battery A 105 V, Internal resistance 0.25 ohm’
ii. Battery B 100 V, Internal resistance 0.2 ohm
iii. Battery C 95 V, Internal resistance 0.25 ohm
Determine the current values in the two resistors and the power dissipated by them.
2009/SR6 2008/SR10 2008/SR4 2007/SR7 2011/SR7 2010/SR9 2011/SR1
2010/SR8 2012/SR7 2013/SR11 2014/SR01 2014/SR03 2015/SR03 2015/SR08
2016/SR4 2017/SR7 2018/SR04 2019/APR 2019/JULY 2019/NOV 2020/OCT/Q6
2023/JAN/Q10 2023/JUNE/Q10 2023/OCT/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

MARCH 2024
SR.NO. 21324 - 1

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2024)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I
Q1. A. Sketch a main engine shaft driven generator arrangement with an electronic system for frequency
correction; (8)
B. Describe the operation of the generator arrangement sketched in (A). (8)
2009/SR8 2008/SR8 2008/SR6 2007/SR8 2006/SR9 2006/SR5 2011/SR9
2011/SR12 2013/SR1 2013/SR4 2014/SR07 2015/SR03 2015/SR09 2017/SR09
2018/SR10 2019/MAR 2019/DEC 2022/SEP/Q1 2024/JAN/Q1 2024/MAR/Q1

Q2. With reference to Electronic control systems:


A. Draw a simple block diagram for temperature control; (8)
B. Describe each component shown in the diagram in (a). (8)
2011/SR9 2010/SR8 2011/SR4 2011/SR1 2010/SR10 2010/SR3 2010/SR4
2011/SR12 2011/SR3 2012/SR09 2014/SR03 2014/SR07 2014/SR09 2015/SR08
2015/SR09 2015/SR10 2016/SR02 2016/SR10 2016/SR11 2017/SR04 2017/SR06
2017/SR09 2018/SR12 2022/SEP/Q5 2023/OCT/Q2 2024/JAN/Q5 2024/MAR/Q2

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
Q3. a) Sketch a circuit diagram for an automatic voltage regulator illustrating how the A.V.R. utilizes a
Silicon-controlled rectifier to control the excitation system for an alternator. (8)
b) Describe how the A.V.R. monitors output and controls the excitation system. (8)
2011/SR12 2014/SR07 2015/SR09 2017/SR09 2018/SR10 2018/SR12 2019/MAR
2020/DEC/Q1 2021/MAR/Q2 2021/APR/Q1 2021/SEP/Q2 2021/DEC/Q2 2023/FEB/Q1 2024/MAR/Q3

Q4. It is proposed to operate a Bow thruster unit from a 3.3 KV electrical supply.
Outline suitable options for the design of installation under each of the following heading.
A. Protection of main switch board
B. Overload of a bow thruster motor
C. Cable protection (16)
2011/SR12 2012/SR3 2012/SR4 2014/SR07 2015/SR09 2017/SR09 2024/MAR/Q4

Q5. With reference to a three phase shipboard electrical distribution system:


A. Enumerate the advantages of an insulated neutral system. (4)
B. Enumerate the disadvantages of an insulated neutral system. (4)
C. Describe how the earthed neutral system is Earthed. (4)
D. Compare the use of an insulated neutral system as opposed to the use of an Earthed neutral System
with regard to the risk of electric shock from either system. (4)
2009/SR8 2008/SR8 2007-8/EM 2005/SR9 2007/SR5 2006/SR9 2008/SR6
2011/SR12 2012/SR2 2012/SR9 2014/SR07 2014/SR11 2015/SR09 2017/SR09
2024/FEB/Q4 2024/MAR/Q5

SECTION – II
Q6. A. A series circuit having resistance, Inductance and capacitance is to be operated on a constant
voltage supply of available frequency. Indicate graphically how changes will take place in the current
and voltage in resistance, inductance and capacitance, and also capacitive reactance and inductive
reactance. (6)
B. A resistance of 130 Ω and a capacitor of 30µF are connected in parallel across a 230 Volt, 50Hz
supply. Find the current in each component, total current, phase angle and the power consumed. (10)
2014/APR/Q6 2023/SEP/Q6 2024/MAR/Q6

Q7. A. Explain the working principal of a three-phase induction motor. What are the various types of
rotors? (6)
B. An 18.65Kw, 6-pole, 50Hz, 3 phase slip ring induction motor runs at 960 rpm on full load with a
rotor current per phase of 35A, allowing 1Kw for mechanical losses, find the resistance per phase of 3-
phase rotor winding. (10)
2014/SR4 2014/SR10 2016/SR12 2023/MAR/Q9 2023/SEP/Q7 2024/MAR/Q7

Q8. a) Explain why the iron losses in a transformer are substantially independent of the load current. (6)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
b) The equivalent circuit for a 200/400-V step-up transformer has the following parameters referred to
the low-voltage side. (10)
Equivalent resistance = 0.15 ; Equivalent reactance = 0.37 
Core-loss component resistance = 600 ; Magnetising reactance = 300 
When the transformer is supplying a load at 10 A at a power factor if 0.8 lag, Calculate,
i) the primary current
ii) secondary terminal voltage.
2024/MAR/Q8

Q9. A. Sketch a graph of starting current, and torque against the speed of rotation for a single cage
motor. (6)
B. A 230V motor, which normally develops 10Kw at 1000 rev/min with an efficiency of 85%, is to be
used as a generator. The armature resistance is 0.15Ohm and the shunt field resistance is 220Ohm. If
it is driven at 1080 rev/min and the field current is adjusted to 1.1A by means of the shunt regulator
what output in Kw could be expected as a generator, if the armature copper loss was kept down to that
when running as a motor. (10)
2014/SR4 2023/SEP/Q9 2024/MAR/Q9

Q10. A. Compare the effectiveness of a current limiting circuit breaker with that of a HRC fuse. (6)
B. A coil having a resistance of 10 Ohm, and an inductance of 0.15 H is connected in series with a
capacitor across a 100V, 50Hz supply. If the current and the voltage are in phase what will be the value
of the current in the circuit and the voltage drop across the coil? (10)
2014/SR4 2018/SR10 2019/MAR 2019/APR 2019/JUN 2019/JULY 2019/SEP
2019/OCT 2019/NOV 2019/DEC 2020/JAN 2020/OCT/Q10 2021/FEB/Q10 2021/MAR/Q9

2021/APR/Q8 2021/JUL/Q9 2021/SEP/Q10 2022/MAR/Q10 2023/SEP/Q10 2024/MAR/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

AUGUST 2024
SR.NO. MET - 2408

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2024)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I
Q1. a) Describe the working principle of a Programmable Logic Controller (PLC) used in ship automation
systems. How does a PLC enhance the safety and efficiency of shipboard operations? (8)
b) Explain the process of programming a PLC for an emergency shutdown sequence on a marine engine.
What considerations should be taken into account to ensure reliable operation in critical situations? (8)
2024/AUG/Q1

Q2. a) Explain the construction and working principle of three-phase induction motor used on ships.
How is the direction of rotation of the motor reversed? (8)
b) Discuss the maintenance procedures for an electric propulsion motor on a ship. What common faults
can occur in the motor, and how would you diagnose and repair them? (8)
2024/AUG/Q2

Q3. With reference to electronic control systems


A. Draw a simple block diagram for temperature control. (8)
B. Describe each component shown in the diagram in (a). (8)
2011/SR9 2010/SR8 2011/SR4 2011/SR1 2010/SR10 2010/SR3 2010/SR4
2011/SR12 2011/SR3 2012/SR09 2014/SR03 2014/SR07 2014/SR09 2015/SR08
2015/SR09 2015/SR10 2016/SR02 2016/SR10 2016/SR11 2017/SR04 2017/SR06
2017/SR09 2018/SR12 2022/SEP/Q5 2023/OCT/Q2 2024/JAN/Q5 2024/MAR/Q2 2024/JUN/Q1

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
2024/AUG/3

Q4. a) Explain the concept of power factor in electrical systems. Why is it important to maintain a high-
power factor on board a ship? (8)
b) Discuss the methods used to correct power factor on ships. How does power factor correction
improve the efficiency of the electrical system? (8)
2024/AUG/Q4

Q5. Explain the matching of an induction electric motor to a pump required for main circulating duty,
with the aid of pump characteristic and torque/ship diagrams. (16)
2010/SR09 2019/APR 2019/JULY 2019/OCT 2022/NOV/Q2 2024/FEB/Q3 2024/AUG/Q5

SECTION – II
Q6. A. Explain what is meant by the terms wave form, frequency and average value. (6)
B. A moving coil ammeter, a thermal ammeter and a rectifier are connected in series with a resistor
across a 110 V sinusoidal a.c. supply. The circuit has a resistance of 50 𝛀 to current in one direction
and, due to the rectifier, an infinite resistance to current in the reverse direction. Calculate:
(i) The readings on the ammeters.
(ii) The form and peak factors of the current wave. (10)
2012/SR02 2019/APR 2019/JULY 2019/OCT 2019/NOV 2024/JUN/Q6 2024/AUG/Q6

Q7. A. Why is it important to maintain high efficiency of operation and low values of voltages regulation
for power transformers? (6)
B. A 100 KVA transformer has 400 turns on the primary and 80 turns on the secondary. The primary
and secondary resistances are 0.3 𝛀 and 0.01 𝛀 respectively, and the corresponding leakage reactances
are 1.1 𝛀 and 0.035 𝛀 respectively. The supply voltage is 2200 V. Calculate:
(i) The equivalent impedance referred to the primary circuit.
(ii) The voltage regulation and secondary terminal voltage for full load having a power factor of (a) 0.8
lagging and (b) 0.8 leading. (10)
2011/SR7 2010/SR9 2010/SR7 2011/SR4 2010/SR11 2011/SR11 2012/SR7
2012/SR11 2013/SR08 2014/SR01 2014/SR08 2014/SR10 2015/SR03 2016/SR4
2016/SR12 2018/SR04 2019/APR 2019/JULY 2019/OCT 2019/NOV 2020/MAR/Q8
2022/OCT/Q8 2023/JAN/Q8 2023/MAR/Q8 2023/JUNE/Q8 2024/JUN/Q7 2024/AUG/Q7

Q8. A. List the factors that determine the starting torque of the three-phase induction motor. How does
this torque generally compare with the value of the rated torque? (6)
B. The low-voltage release of an A.C. motor-starter consists of a solenoid into which an iron plunger is
drawn against a spring. The resistance of the solenoid is 35 ohms. When connected to a 220 V, 50 Hz,
A.C. supply the current taken is at first 2 A, and when the plunger is drawn into the “full-in” position
the current falls to 0.7 A. Calculate the inductance of the solenoid for both positions of the plunger, and
the maximum value of flux-linkages in weber-turns for the “full-in” position of the plunger. (10)
2009/SR7 2009/SR6 2008/SR10 2008/SR8 2008/SR4 2008/SR3 2011/SR7
2013/SR11 2011/SR1 2010/SR6 2011/SR4 2012/SR7 2012/SR12 2013/SR08
2013/SR10 2014/SR03 2015/SR03 2015/SR08 2016/SR4 2010/SR8 2014/SR01
2010/SR9 2016/SR06 2016/SR11 2017/SR07 2018/SR04 2018/SR11 2019/APR
2019/JULY 2019/OCT 2019/NOV 2020/NOV/Q9 2023/JAN/Q9 2023/JUNE/Q9 2023/OCT/Q9
2024/JUN/Q8 2024/AUG/Q8

Q9. A. With the aid of delta and star connection diagrams, state the basic equation from which delta
– star and star – delta conversion equation can be derived. (6)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
B. Three batteries A, B and C have their negative terminals connected together, between the positive
terminals of A and B there is a resistor of 0.5 ohm and between B and C there is a resistor of 0.3 ohm.
(10)
i. Battery A 105 V, Internal resistance 0.25 ohm
ii. Battery B 100 V, Internal resistance 0.2 ohm
iii. Battery C 95 V, Internal resistance 0.25 ohm
Determine the current values in the two resistors and the power dissipated by them.
2009/SR6 2008/SR10 2008/SR4 2007/SR7 2011/SR7 2010/SR9 2011/SR1
2010/SR8 2012/SR7 2013/SR11 2014/SR01 2014/SR03 2015/SR03 2015/SR08
2016/SR4 2017/SR7 2018/SR04 2019/APR 2019/JULY 2019/NOV 2020/OCT/Q6
2023/JAN/Q10 2023/JUNE/Q10 2023/OCT/Q10 2024/JUN/Q9 2024/AUG/Q9

Q10. A. Compare the effectiveness of a current limiting circuit breaker with that of a HRC fuse. (6)
B. A coil having a resistance of 10 Ohm, and an inductance of 0.15 H is connected in series with a
capacitor across a 100 V, 50 Hz supply. If the current and the voltage are in phase what will be the
value of the current in the circuit and the voltage drop across the coil? (10)
2014/SR4 2018/SR10 2019/MAR 2019/APR 2019/JUN 2019/JULY 2019/SEP
2019/OCT 2019/NOV 2019/DEC 2020/JAN 2020/OCT/Q10 2021/FEB/Q10 2021/MAR/Q9

2021/APR/Q8 2021/JUL/Q9 2021/SEP/Q10 2022/MAR/Q10 2023/SEP/Q10 2024/MAR/Q10 2024/JUN/Q10

2024/AUG/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

APRIL 2023
SR.NO.MET-2304

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2023)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I

Q1. A. Give a brief outline of the care and maintenance that should be given to the stator and rotor of
an A.C. generator;
B. Explain what is likely to occur if the driving power of one A.C. generator suddenly fails when two
generators are running in parallel. What safety devices are usually provided for such events?
2014/SR8 2018/SR08 2018/SR10 2018/SR11 2019/MAR 2019/NOV 2021/JAN/Q1
2021/AUG/Q1 2022/APR/Q3 2022/OCT/Q1 2023/APR/Q1

Q2. Compare methods of obtaining speed regulation of three-phase induction motors generally used in
tankers by means of:
A. Rotor resistance; B. Cascade system; C. Pole-changing.
Give examples where each system may be employed with advantage.
2014/SR06 2014/SR08 2018/SR08 2019/DEC 2020/DEC/Q3 2021/JAN/Q5 2021/SEP/Q3

2021/DEC/Q3 2022/AUG/3 2022/OCT/Q2 2023/APR/Q2

Q3. A. Explain how the efficiency and regulation of a transformer can be assessed by open circuit and
short circuit tests?
B. What is meant by equivalent resistance?

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
2014/SR8 2018/SR08 2018/SR09 2019/JAN 2019/MAR 2022/OCT/Q3 2023/APR/Q3

Q4. With reference to a 3 speed a.c. cage motor driven cargo winch:
A. Sketch a circuit diagram for a pole change motor;
B. Describe how speed change and braking are achieved.
2009/SR6 2008/SR4 2007/SR8 2006/SR8 2011/SR8 2010/SR2 2010/SR1
2011/SR2 2012/SR11 2014/SR02 2014/SR08 2018/SR08 2018/SR12 2022/OCT/Q4
2023/APR/Q4

Q5. With reference to the condition monitoring of electrical machinery:


A. State TWO important parameters that may be recorded;
B. Explain how the parameters are measured and what defects may be revealed.
2009/SR6 2008/SR4 2007/SR8 2006/SR8 2006/SR2 2011/SR8 2010/SR1
2012/SR7 2012/SR11 2014/SR01 2014/SR02 2014/SR08 2018/SR08 2018/SR09
2018/SR11 2019/JAN 2019/APR 2019/JULY 2020/DEC/Q3 2022/JUL/Q5 2022/OCT/Q5
2023/APR/Q5
SECTION – II

Q6. (a). Explain the significance of the root- mean- square value of an alternating current or voltage
waveform; Define the form factor of such a wave form.
(b). A total load of 8000 kW at 0.8 power factor is supplied by two alternators in parallel. One alternator
supplies 6000 kW at 0.9 power factor. Find the kVA rating of the other alternator and the power factor.
2011/SR8 2011/SR4 2011/SR7 2010/SR8 2010/SR2 2010/SR1 2012/SR4
2011/SR1 2012/SR7 2012/SR12 2013/SR08 2013/SR11 2014/SR01 2014/SR03
2015/SR03 2015/SR08 2016/SR4 2016/SR07 2018/SR04 2018/SR07 2018/SR08
2018/SR09 2018/SR11 2018/SR12 2020/JAN 2020/OCT/Q9 2020/DEC/Q6 2021/JAN/Q8
2021/FEB/Q8 2021/MAR/Q10 2021/APR/Q6 2021/SEP/Q6 2021/OCT/Q9 2021/NOV/Q6 2022/FEB/Q8
2022/MAR/Q9 2022/JUN/Q6 2023/APR/Q6

Q7. A. Electric motors contain a stationary member as well as a rotating member. For each of the
following machines, identify in which part of the motor three field winding and the armature winding
are located: three phase induction motor, three phase synchronous motor, d.c. motor.
B. A 220 V, d.c. shunt motor has an armature resistance of 0.5 ohm and an armature current of 40 A
on full load. Determine the reduction in flux necessary for a 50 per cent reduction in speed. The torque
for both conditions can be assumed to remain constant.
2011/SR8 2010/SR2 2010/SR1 2018/SR08 2018/SR11 2018/SR12 2023/APR/Q7

Q8. A. Show how the power that is transferred across the air gap of the three-phase induction motor is
represented. Explain the terms. What portion of this is useful power?
B. A 440 load of 400 KW at 0.8 (lagging) power factor is jointly supplied by two alternator A and B.
The KW load on A is 150 KW and the KVAr load on B is 150 KVAr (lagging). Determine the KW load on
B, the KVAr load on A, the power factor of operation on each machine and the current loading of each
machine.
2006/7EM 2007/SR6 2006/SR1 2012/SR1 2011/SR8 2013/SR12 2014/SR02
2018/SR08 2018/SR11 2018/SR12 2022/APR/Q9 2023/APR/Q8

Q9 A. Explain the preference for a 60 Hz system. Describe the dangers of running a 50 Hz system from
a 60 Hz supply.
B. A ring-main, 900m long, is supplied at a point A at a p.d. of 220V. At a point B, 240m from A, a
load of 45A is drawn from the main, and at a point C, 580m from A, measured in the some direction, a
load of 78A is taken from the main. If the resistance of the main (lead and return) is 0.25 ohm per
kilometre, calculate the current which will flow in each direction round the main from the supply point
A and the potential difference across the main, at the load where it is lowest.
2011/SR8 2010/SR2 2010/SR1 2018/SR08 2018/SR11 2018/SR12 2021/APR/Q7

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
2022/APR/Q10 2023/APR/Q9

Q10. A. (i) What is direct-connected alternator?


(ii) How is a direct-connected exciter arranged in an alternator?
B. Find the synchronous impedance reactance of an alternator in which a given field current produces
an armature current of 200 A on short circuit and a generated e.m.f. of 50V on open circuit. The
armature resistance is 0.1 ohm. To what induced voltage must the alternator be excited if it is to deliver
a load of 100A at a p.f of 0.8 lagging, with a terminal voltage of 200 V.
2018/AUG/Q10 2023/APR/Q10
PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

SEPTEMBER 2024
SR.NO. MET - 2409

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2024)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices
that runs on windows | iOS | mac OS | android OS| Devices such as phones,
computers, mobiles, tablets etc.
Please click here to purchase our original books. we have solved all past exam
papers of last 15 years. clean content, cad drawing with our 15 years of expertise
in maritime publishing.

SECTION – I
Q1. a) Explain the construction and the periodic maintenance required of a Vacuum Circuit Breaker
(VCB). (8)
b) Compare the construction, operation, and usage of Vacuum Circuit Breakers (VCB) with Air Circuit
Breakers (ACB). (8)
2024/SEP/Q1

Q2. a) Explain the construction and working principle of Star-Delta Starter with the help of circuit
diagram. What are the advantages and limitations of using a Star-Delta Starter for starting an induction
motor. (10)
b) Describe the maintenance procedures for a motor starter. What are the common faults, and how
would you troubleshoot them. (6)
2024/SEP/Q2

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2

Q3. Explain the methods used to control the speed of a 3 Phase induction motors. Draw and Explain a
Variable Frequency Drive used for optimization of energy efficiency of auxiliary machineries on board
vessels. (16)
2019/AUG 2019/NOV 2020/FEB/Q1 2020/NOV/Q1 2021/OCT/Q2 2022/APR/Q1 2022/JUL/Q2
2023/NOV/Q1 2024/SEP/Q3

Q4. What is the meant by "excitation" in an alternator? With the help of a neat diagram of brushless
alternator labelling all the important parts. explain how the excitation is achieved in a brushless
alternator. (16)
2019/AUG 2020/MAR/Q3 2020/OCT/Q2 2021/FEB/Q4 2021/OCT/Q1 2022/MAR/Q2 2022/JUN/Q4
2023/NOV/Q3 2024/SEP/Q4

Q5. a) Explain the construction, working principle, and characteristics of a Zener Diode. Discuss its
applications in electronic circuits. (8)
b) What is a Zener Barrier? With the help of a diagram, explain how a Zener Barrier works in an intrinsic
Safe Circuit and discuss its importance in hazardous environments. (8)
2024/SEP/Q5

SECTION – II
Q6. A. What are the characteristics of PN junction diode? Point out its specifications. Also point out the
significance of dynamic and static resistances. (6)
B. A 72 KVA transformer supplies a heating and lighting load of 12 KW at unity power factor and a
motor load of 70 kVA at 0.766 (lagging) power factor: Calculate the minimum rating of the power-factor
improvement capacitors which must be connected in the circuit the ensure that the transformer does
not become overloaded. (10)
2024/SEP/Q6

Q7. A. Which of the following three motors has the poorest speed regulation: shunt motor, series Motor
or cumulative compound motor? Explain. (6)
B. A 440V shunt motor takes an armature current of 30A at 700 rev/min. The armature resistance is
0.7ohm. If the flux is suddenly reduced by 20 per cent, to what value will the armature current rise
momentarily? Assuming unchanged resisting torque to motion, what will be the new steady values of
speed and armature current? Sketch graphs showing armature current and speed as functions of time
during the transition from initial to final, steady-state conditions. (10)
2009/SR2 2008/SR9 2007/SR9 2007/SR4 2006/SR4 2010/SR11 2010/SR7
2010/SR4 2011/SR11 2012/SR3 2012/SR6 2012/SR9 2012/SR11 2013/SR4
2014/SR06 2014/SR08 2014/SR10 2015/SR10 2015/SR12 2016/SR16 2019/MAR
2019/JUN 2019/SEP 2019/DEC 2022/OCT/Q10 2023/MAR/Q10 2024/SEP/Q7

Q8. A. What is back emf? Derive the relation for the back emf and the supplied voltage in terms of
armature resistance. (6)
B. A three- phase induction motor is wound for four poles and is supplied from a 50 Hz system.
Calculate. (10)
i. The synchronous speed:
ii. The speed of the rotor when the slip is 4 per cent:
iii. The rotor frequency when the speed of the rotor is 600 r/min.
2012/SR09 2013/SR10 2014/SR09 2015/SR09 2017/SR09 2017/SR12 2018/SR10
2019/MAR 2019/JUN 2019/SEP 2019/DEC 2020/JAN 2020/NOV/Q7 2021/JUL/Q7
2021/JUL/Q10(M) 2021/AUG/Q10 2021/SEP/Q7 2021/OCT/Q10 2021/NOV/Q8 2022/APR/Q7 2022/JUN/Q8
2024/SEP/Q8

Q9. A. What are the factors which determine the synchronous speed of a motor? (6)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
B. Three conductors fitted side by side in the stator of a salient-pole alternator. Each generates maximum
voltage of 200V (sinusoidal). The angle subtended at the centre of the stator between adjacent
conductors is 20 electrical degrees. If the three conductors are connected in series, find (i) the r.m.s.
value of the effective voltage and (ii) the ‘breadth factor’. Using the theory that is the basis of this
problem, give one reason why three-phase current has been introduced. (10)
2010/SR6 2011/SR9 2011/SR12 2014/SR07 2014/SR09 2015/SR01 2015/SR09
2017/SR09 2017/SR12 2018/SR10 2019/MAR 2019/JUN 2019/SEP 2019/DEC
2020/JAN 2020/DEC/Q8 2021/JUL/Q8 2021/NOV/Q9 2021/DEC/Q8 2024/SEP/Q9

Q10. A. Compare the effectiveness of a current limiting circuit breaker with that of a HRC fuse. (6)
B. A coil having a resistance of 10 Ohm, and an inductance of 0.15 H is connected in series with a
capacitor across a 100 V, 50 Hz supply. If the current and the voltage are in phase what will be the
value of the current in the circuit and the voltage drop across the coil? (10)
2014/SR4 2018/SR10 2019/MAR 2019/APR 2019/JUN 2019/JULY 2019/SEP
2019/OCT 2019/NOV 2019/DEC 2020/JAN 2020/OCT/Q10 2021/FEB/Q10 2021/MAR/Q9

2021/APR/Q8 2021/JUL/Q9 2021/SEP/Q10 2022/MAR/Q10 2023/SEP/Q10 2024/MAR/Q10 2024/JUN/Q10

2024/AUG/Q10 2024/SEP/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

AUGUST 2023
SR.NO.MET-2308

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2023)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I

Q1. Differentiate between half and full wave rectification. St


ate where half wave rectification may be used and the purpose for which it is not well adapted. Sketch
a bridge connection by which full wave rectification may be obtained. (16)
2011/SR10 2012/SR12 2011/SR10 2014/SR10 2016/SR06 2018/SR03 2023/MAR/Q3
2023/AUG/Q1

Q2. A. Describe with the aid of a simple sketch the arrangement of the three-phase winding of an
alternator showing the neutral point. (10)
B. Explain why for most ships the neutral point is insulated. (3)
C. Explain why in some installation the neutral point is earthed? (3)
2011/SR10 2012/SR12 2014/SR10 2018/SR03 2021/JAN/Q3 2021/FEB/Q3 2021/APR/Q4
2021/JUL/Q1 2021/AUG/Q3 2022/JAN/Q3 2022/FEB/Q4 2023/MAR/Q4 2023/AUG/Q2

Q3. A. State the necessary conditions required prior to the synchronizing of electrical alternators. (4)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
B. Describe the type of cumulative damage that may be caused when alternators are incorrectly
synchronized. (4)
C. Explain how the damage referred to in (b) can be avoided / reduced. (4)
D. For two alternators operating in parallel state the consequences of: (4)
(i) Reduced torque from the prime mover of one machine.
(ii)Reduced excitation on one machine.
2009/SR6 2008/SR4 2007/SR9 2007/SR8 2007/SR2 2005/SR1 2006/SR8
2006/SR4 2006/SR3 2010/SR4 2010/SR3 2012/SR3 2014/SR4 2014/SR06
2019/DEC 2019/DEC 2023/JUNE/Q1 2023/AUG/Q3

Q4. A. What is intrinsic electric safety? (6)


B. Can live maintenance be done on intrinsically safe circuits? (5)
C. Describe intrinsically safe equipment used on board ship. (5)
2011/SR10 2023/AUG/Q4

Q5. A. (i) Sketch a diagrammatic arrangement of a static or self-excited alternator. (4)


(ii) Describe the operation of the self-excited alternator. (4)
B. State why the voltage dip is less in the self-excited alternator than in brushless or conventional
alternators. (8)
2011/SR10 2023/AUG/Q5
SECTION – II

Q6. A. What are factors on which the speed of a motor depends? Discuss them for series and shunt
motors. (6)
B. A shunt motor supplied at 230 V runs at 900 rpm. When the armature current is 30 A, the resistance
of the armature circuit is 0.4 𝛀, calculate the resistance required in series with the armature circuit to
reduce the speed to 500 rpm. Assume that the armature current is 25 Amps. (10)
2011/SR10 2012/SR6 2013/SR09 2023/AUG/Q6

Q7. A. Derive an expression for the e.m.f induced in an a.c. generator. (6)
B. A 3000 KVA, 6 pole alternators runs at 1000 r.p.m in parallel with other machines on 3300 V bus-
bars. The synchronous reactance is 25%. Calculate the synchronizing power for one mechanical degree
of displacement and the corresponding synchronizing torque. (10)
2009/SR3 2006/SR2 2023/AUG/Q7

Q8. A. Explain the purpose of interpoles and state their magnetic polarity relative to the main poles of
both generators and motors. (6)
B. A 200V, long-shunt compound-wound generator has a full-load output of 20kW. The various
resistances are as follows; armature (including brush contact) 0.15 ohm, series field 0.025 ohm,
interpole field 0.028 ohm, shunt field (including the field-regulator resistance) 115 ohm. The iron losses
at full load are 780W, and the friction and windage losses 590W. Calculate the efficiency at full load.
(10)
2006/SR4 2010/SR3 2011/SR10 2022/AUG/Q9 2022/SEP/Q09 2023/AUG/Q8

Q9. A. What are the factors which determine the synchronous speed of a motor? (6)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
B. A 72 KVA transformer supplies a heating and lighting load of 12 KW at unity power factor and a
motor load of 70 kVA at 0.766 (lagging) power factor; Calculate the minimum rating of the power-factor
improvement capacitors which must be connected in the circuit the ensure that the transformer does
not become overloaded. (10)
2023/AUG/Q9

Q10. (A). Compare the effectiveness of a current limiting circuit breaker with that of a HRC fuse. (6)
B. Evaluate for a frequency of 15 kHz, the amplification and the phase difference between input and
output signals of a voltage amplifier using a triode having an amplification factor of 48 and a mutual
conductance of 1.2 m A/V with an anode-load resistant of 160 k𝛀. The output p.d. is fed by a coupling
capacitor of negligible reactance to a subsequent circuit of resistance 480 k𝛀 and the total shunt
capacitance is 90µ F. (10)
2023/AUG/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

NOVENBER 2024
SR.NO. MET - 2411

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2024)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices
that runs on windows | iOS | mac OS | android OS| Devices such as phones,
computers, mobiles, tablets etc.
Please click here to purchase our original books. we have solved all past exam
papers of last 15 years. clean content, cad drawing with our 15 years of expertise
in maritime publishing.

SECTION – I
Q1. A. Explain why it is necessary to have reverse power protection for alternators intended for
operation. (4)
B.(i) Sketch a reverse power trip. (6)
(ii) Briefly explain the principle on which the operation of this power trip is based and how tripping is
activated. (6)
2009/SR2 2008/SR10 2008/SR3 2007/S7 2007/SR6 2010/SR12 2011/SR7
2010/SR7 2010/SR7 2010/SR6 2011/S1 2012/SR1 2013/SR4 2013/SR11
2013/SR12 2015/SR12 2016/SR4 2018/SR1 2020/OCT/Q3 2020/DEC/Q4 2021/JUL/Q2
2021/JUL/Q4(M) 2021/OCT/Q3 2023/JAN/Q1 2024/NOV/Q1

Q2. A. Describe a brush less alternator with a.c. exciter static A.V.R. (8)
B. State the output voltage characteristics for this type of machine. (8)
2009/SR2 2008/SR10 2008/SR3 2006-7/EM 2007/SR7 2005/SR1 2006/SR3

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
2006/SR1 2010/SR12 2011/SR7 2010/SR7 2010/SR6 2010/SR3 2010/SR3
2011/SR11 2013/SR11 2016/SR4 2020/NOV/Q5 2022/APR/Q4 2023/JAN/Q2 2023/OCT/Q2
2024/NOV/Q2

Q3. With the aid of sketch describe the main features and principle of operation of a D.C. moving coil
meter. If such a meter is designed to give full scale deflection with 150 m, State how it may be adapted:
(i) As an ammeter to read up to 150 A: (ii) As a voltmeter to read up to 150 V. No calculations are
required. (16)
2009/SR2 2008/SR10 2008/SR3 2007/SR7 2010/SR12 2011/SR7 2010/SR7
2010/SR11 2010/SR6 2011/SR11 2013/SR11 2016/SR4 2023/JAN/Q3 2024/NOV/Q3

Q4. With reference to U.M.S. operation:


A. State with reasons the essential requirements for unattended machinery spaces. (8)
B. As second Engineer, describe how you would respond to the irretrievable failure of the Machinery
space fire alarm system whilst the ship is on voyage. (8)
2009/SR2 2008/SR10 2008/SR3 2007/SR7 2007/SR3 2010/SR12 2011/SR7
2010/SR9 2010/SR7 2010/SR6 2010/SR4 2011/SR11 2012/SR4 2012/SR8
2013/SR07 2013/SR11 2013/SR12 2014/SR06 2014/SR12 2015/SR01 2015/SR7
2016/SR4 2016/SR04 2017/SR12 2019/APR 2019/OCT 2019/DEC 2020/NOV/Q2
2021/APR/Q4 2021/JUL/Q3 2021/SEP/Q5 2021/NOV/Q4 2022/APR/Q2 2023/JAN/Q4 2024/FEB/Q2
2024/NOV/Q4

Q5. With reference to preferential tripping in a marine electrical distribution system.


A. State why this facility is required. (6)
B. With the aid of a sketch, describe a typical arrangement to provide three stages of tripping an
instantaneous protection against short circuit. (10)
2010/SR6 2010/SR7 2010/SR11 2011/SR7 2011/SR10 2011/SR11 2013/SR1
2013/SR4 2013/SR11 2015/SR3 2016/SR04 2018/SR11 2021/JAN/Q4 2021/APR/Q5
2021/NOV/Q3 2021/DEC/Q4 2022/FEB/Q5 2022/JUL/Q4 2023/JAN/Q5 2024/NOV/Q5

SECTION – II

Q6. (a) Explain the significance of the root- mean- square value of an alternating current or voltage
waveform. Define the form factor of such a wave form. (6)
(b) A total load of 8000 kW at 0.8 power factor is supplied by two alternators in parallel. One alternator
supplies 6000 kW at 0.9 power factor. Find the kVA rating of the other alternator and the power factor.
(10)
2011/SR8 2011/SR4 2011/SR7 2010/SR8 2010/SR2 2010/SR1 2012/SR4
2011/SR1 2012/SR7 2012/SR12 2013/SR08 2013/SR11 2014/SR01 2014/SR03
2015/SR03 2015/SR08 2016/SR4 2016/SR07 2018/SR04 2018/SR07 2018/SR08
2018/SR09 2018/SR11 2018/SR12 2020/JAN 2020/OCT/Q9 2020/DEC/Q6 2021/JAN/Q8
2021/FEB/Q8 2021/MAR/Q10 2021/APR/Q6 2021/SEP/Q6 2021/OCT/Q9 2021/NOV/Q6 2022/FEB/Q8
2022/MAR/Q9 2022/JUN/Q6 2023/APR/Q6 2023/JUNE/Q6 2024/JUL/Q6 2024/NOV/Q6

Q7. A. By means of a schematic circuit diagram illustrate the peak rectifier. If the supply voltage is v(t)
= VmSint, what is the voltage across the load resistor? (6)
B. A battery-charging circuit is shown below in Fig. The forward resistance of the diode can be
considered negligible and the reverse resistance infinite. The internal resistance of the battery is
negligible. Calculate the necessary value of the variable resistance R so that the battery charging current
is 1.0 A (10)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3

2011/SR7 2010/SR7 2011/SR4 2010/SR11 2011/SR11 2012/SR4 2012/SR7


2012/SR11 2013/SR08 2014/SR01 2014/SR08 2014/SR10 2015/SR03 2015/SR4
2016/SR12 2018/SR04 2018/SR07 2020/JAN 2021/MAR/Q8 2021/JUL/Q8 2021/SEP/Q9
022/JUN/Q7 2022/OCT/Q7 2023/JAN/Q7 2023/MAR/Q7 2023/JUNE/Q7 2024/NOV/Q7

Q8. A. Why is it important to maintain high efficiency of operation and low values of voltage regulation
for power transformers? (6)
B. A 100 KVA transformer has 400 turns on the primary and 80 turns on the secondary. The primary
and secondary resistances are 0.3 𝛀 and 0.01 𝛀 respectively, and the corresponding leakage reactances
are 1.1 𝛀 and 0.035 𝛀 respectively. The supply voltage is 2200 V. Calculate:
(i) The equivalent impedance referred to the primary circuit.
(ii) The voltage regulation and secondary terminal voltage for full load having a power factor of (a) 0.8
lagging and (b) 0.8 leading. (10)
2011/SR7 2010/SR9 2010/SR7 2011/SR4 2010/SR11 2011/SR11 2012/SR7
2012/SR11 2013/SR08 2014/SR01 2014/SR08 2014/SR10 2015/SR03 2016/SR4
2016/SR12 2018/SR04 2019/APR 2019/JULY 2019/OCT 2019/NOV 2020/MAR/Q8
2022/OCT/Q8 2023/JAN/Q8 2023/MAR/Q8 2023/JUNE/Q8 2024/JUN/Q7 2024/AUG/Q7 2024/NOV/Q8

Q9. A. List the factors that determine the starting torque of the three-phase induction motor. How does
this torque generally compare with the value of the rated torque? (6)
B. The low-voltage release of an A.C. motor-starter consists of a solenoid into which an iron plunger is
drawn against a spring. The resistance of the solenoid is 35 ohms. When connected to a 220 V, 50 Hz,
A.C. supply the current taken is at first 2 A, and when the plunger is drawn into the “full-in” position
the current falls to 0.7 A. Calculate the inductance of the solenoid for both positions of the plunger and
the maximum value of flux-linkages in weber-turns for the “full-in” position of the plunger. (10)
2009/SR7 2009/SR6 2008/SR10 2008/SR8 2008/SR4 2008/SR3 2011/SR7
2013/SR11 2011/SR1 2010/SR6 2011/SR4 2012/SR7 2012/SR12 2013/SR08
2013/SR10 2014/SR03 2015/SR03 2015/SR08 2016/SR4 2010/SR8 2014/SR01
2010/SR9 2016/SR06 2016/SR11 2017/SR07 2018/SR04 2018/SR11 2019/APR
2019/JULY 2019/OCT 2019/NOV 2020/NOV/Q9 2023/JAN/Q9 2023/JUNE/Q9 2023/OCT/Q9
2024/JUN/Q8 2024/AUG/Q8 2024/NOV/Q9

Q10. A. With the aid of delta and star connection diagrams, state the basic equation from which the
delta – star and star – delta conversion equation can be derived. (6)
B. Three batteries A, B and C have their negative terminals connected together, between the positive
terminals of A and B there is a resistor of 0.5 ohm and between B and C there is a resistor of 0.3 ohm.
Battery A 105 V, Internal resistance 0.25 ohm
Battery B 100 V, Internal resistance 0.2 ohm
Battery C 95 V, Internal resistance 0.25 ohm
Determine the current values in the two resistors and the power dissipated by them. (10)
2009/SR6 2008/SR10 2008/SR4 2007/SR7 2011/SR7 2010/SR9 2011/SR1
2010/SR8 2012/SR7 2013/SR11 2014/SR01 2014/SR03 2015/SR03 2015/SR08
2016/SR4 2017/SR7 2018/SR04 2019/APR 2019/JULY 2019/NOV 2020/OCT/Q6
2023/JAN/Q10 2023/JUNE/Q10 2023/OCT/Q10 2024/JUN/Q9 2024/AUG/Q9 2024/NOV/Q10

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 4
PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

JANUARY 2024
SR.NO. 29124 - 1

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2024)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I
Q1. A. Sketch a main engine shaft driven generator arrangement with an electronic system for frequency
correction; (8)
B. Describe the operation of the generator arrangement sketched in (A). (8)
2009/SR8 2008/SR8 2008/SR6 2007/SR8 2006/SR9 2006/SR5 2011/SR9
2011/SR12 2013/SR1 2013/SR4 2014/SR07 2015/SR03 2015/SR09 2017/SR09
2018/SR10 2019/MAR 2019/DEC 2022/SEP/Q1 2024/JAN/Q1

Q2. With reference to testing High Voltage equipment:


(a) Explain why earthing down is considered essential. (3)
(b) Briefly describe the procedures of earthing down (3)
(c) describe how an insulation resistance test is carried out on High Voltage equipment, making reference
to personnel safety; (4)
(d) Describe, with the aid of a sketch, a method to detect earth leakage in EACH of the following systems:
(6)
(i) Earthed
(ii) Insulated
2022/SEP/Q2 2024/JAN/Q2

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
Q3. Explain What is meant by, and the significance of, four of the following terms. (16)
a. Voltage Stabilization, b. Filter choke; c. Impedance,
d. Rectification, e. Grid bias voltage.
2011/SR9 2010/SR7 2010/SR11 2011/SR11 2011/SR3 2012/SR11 2013/SR1 2013/SR04 2014/SR08
2015/SR10 2019/FEB 2019/AUG 2020/FEB/Q9 2022/SEP/Q3 2022/OCT/Q9 2024/JAN/Q3

Q4. Explain the meaning of ‘P’ and ‘N’ types semi-conductor materials and give a brief description of
the mechanism by which current passes through them. (16)
2022/SEP/Q4 2024/JAN/Q4

Q5. With reference to electronic control systems:


A. Draw a simple block diagram for temperature control; (8)
B. Describe each component shown in the diagram in (a). (8)
2011/SR9 2010/SR8 2011/SR4 2011/SR1 2010/SR10 2010/SR3 2010/SR4
2011/SR12 2011/SR3 2012/SR09 2014/SR03 2014/SR07 2014/SR09 2015/SR08
2015/SR09 2015/SR10 2016/SR02 2016/SR10 2016/SR11 2017/SR04 2017/SR06
2017/SR09 2018/SR12 2022/SEP/Q5 2023/OCT/Q2 2024/JAN/Q5

SECTION – II
Q6. a) Derive the expression for current and voltage relations between line and phase values in the star
and delta cases. Draw vector diagram. (6)
b) A balanced delta connected load is connected to a 415V, 50 Hz Supply. If the per phase
impedance of the load is (8+j12) ohm, calculate (i) the phase current of the load. (ii) line current (iii)
power consumed by each phase.
024/JAN/Q6

Q7. A. Discuss different methods of speed control of a D.C. series motor by adjusting field ampere turns.
(6)
B. A 230 V, D.C. shunt motor runs at 1000 r.p.m and takes 5 amperes. The armature resistance of the
motor is 0.025𝛀 and shunt field resistance is 230 𝛀 Calculate the drop in speed when the motor is
loaded and takes the line current of 41 amperes. Neglect armature reaction. (10)
2022/JULY/Q9 2022/AUG/Q7 2023/JULY/Q9 2023/DEC/Q9 2024/JAN/Q7

Q8. A. What are the factors which determine the synchronous speed of a motor? (6)
B. The star-connected rotor of an induction motor has a stand-still resistance of 4.5 ohms/phase and a
resistance of 0.5𝛀/phase. The motor has an induced emf of 50 V between the slip-rings at stand-still
on open circuit when connected to its normal supply voltage. Find the current in each phase and the
power factor at start when the slip-ring is short-circuited. (10)
2010/SR3 2012/SR09 2022/AUG/Q8 2022/SEP/Q08 2023/FEB/Q8 2024/JAN/Q8

Q9. A. Explain the purpose of interpoles and state their magnetic polarity relative to the main poles of
both generators and motors. (6)
B. A 200V, long-shunt compound-wound generator has a full-load output of 20kW. The various
resistances are as follows; armature (including brush contact) 0.15 ohm, series field 0.025 ohm,
interpole field 0.028 ohm, shunt field (including the field-regulator resistance) 115 ohm. The iron losses
at full load are 780W, and the friction and windage losses 590W. Calculate the efficiency at full load.
(10)
2006/SR4 2010/SR3 2011/SR10 2022/AUG/Q9 2022/SEP/Q09 2023/AUG/Q8 2024/JAN/Q9

Q10. A. (I) What is direct-connected alternator? (3)


(ii) How is a direct-connected exciter arranged in an alternator? (3)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
B. A 440V shunt motor tenets an armature current of 30A at 700 rev/min. The armature resistance is
0.7ohm. If the flux is suddenly reduced by 20 per cent, to what value will the armature current rise
momentarily? Assuming unchanged resisting torque to motion, what will be the new steady values of
speed and armature current? Sketch graphs showing armature current and speed as functions of time
during the transition from initial to final, steady-state conditions. (10)
2017/APR 2019/FEB 2021/FEB/Q9 2022/AUG/Q10 2022/SEP/Q10 2024/JAN/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

OCTOBER 2024
SR.NO. MET - 2410

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2024)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices
that runs on windows | iOS | mac OS | android OS| Devices such as phones,
computers, mobiles, tablets etc.
Please click here to purchase our original books. we have solved all past exam
papers of last 15 years. clean content, cad drawing with our 15 years of expertise
in maritime publishing.

SECTION – I
Q1. With reference to electronic control systems
A. Draw a simple block diagram for temperature control. (8)
B. Describe each component shown in the diagram in (a). (8)
2011/SR9 2010/SR8 2011/SR4 2011/SR1 2010/SR10 2010/SR3 2010/SR4
2011/SR12 2011/SR3 2012/SR09 2014/SR03 2014/SR07 2014/SR09 2015/SR08
2015/SR09 2015/SR10 2016/SR02 2016/SR10 2016/SR11 2017/SR04 2017/SR06
2017/SR09 2018/SR12 2022/SEP/Q5 2023/OCT/Q2 2024/JAN/Q5 2024/MAR/Q2 2024/JUN/Q1
2024/AUG/3 2024/OCT/Q1

Q2. A. Describe a brush less alternator with a.c. exciter static A.V.R. (8)
B. State the output voltage characteristics for this type of machine. (8)
2009/SR2 2008/SR10 2008/SR3 2006-7/EM 2007/SR7 2005/SR1 2006/SR3
2006/SR1 2010/SR12 2011/SR7 2010/SR7 2010/SR6 2010/SR3 2010/SR3

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
2011/SR11 2013/SR11 2016/SR4 2020/NOV/Q5 2022/APR/Q4 2023/JAN/Q2 2023/OCT/Q2

Q3. A. State the necessary conditions required prior to the synchronizing of electrical alternators. (4)
B. Describe the type of cumulative damage that may be caused when alternators are incorrectly
synchronized. (4)
C. Explain how the damage referred to in (b) can be avoided / reduced. (4)
D. For two alternators operating in parallel state the consequences of: (4)
(i) Reduced torque from the prime mover of one machine.
(ii)Reduced excitation on one machine.
2009/SR6 2008/SR4 2007/SR9 2007/SR8 2007/SR2 2005/SR1 2006/SR8
2006/SR4 2006/SR3 2010/SR4 2010/SR3 2012/SR3 2014/SR4 2014/SR06
2019/DEC 2019/DEC 2023/JUNE/Q1 2023/AUG/Q3 2023/SEP/Q1 2024/OCT/Q3

Q4. Explain the effect of reduced voltage on standard squirrel cage motors with respect to EACH of the
following: (16)
(a) Burn outs (b) Starting current (c) Starting torque (d) Speed.
2014/SR10 2013/SR12 2014/SR07 2012/SR12 2012/SR03 2011/SR10 2015/SR01
2016/SR06 2017/SR12 2018/SR03 2019/JUN 2019/SEP 2023/MAR/Q5 2024/OCT/Q4

Q5. With the aid of a block diagram, briefly describe the effect which negative voltage feedback has on
an amplifier and state the advantages resulting from the use of negative feedback. (16)
2024/OCT/Q5

SECTION – II

Q6.a) What is the effect on the field flux of an alternator current in the synchronous motor that leads
the terminal voltage. (6)
b) A 1,000-kVA, 11,000-V, 3-ϕ, star-connected synchronous motor has an armature resistance and
reactance per phase of 3.5 Ω and 40 Ω respectively. Determine the induced e.m.f. and angular
retardation of the rotor when fully loaded at (a) unity p.f. (b) 0.8 p.f. lagging (c) 0.8 p.f. leading. (10)
2024/OCT/Q6

Q7.a) Explain the process of voltage buildup in a self-excited shunt generator. (6)
b) A shunt-wound generator has a magnetisation-curve given by the figures below. The total resistance
in the field circuit is 20 Ohm and the armature resistance is 0.02 Ohm. With the machine on load,
estimate the e.m.f. generated and the armature current when the terminal voltage of the machine is
140V. (10)
Field current 1.2 2.8 5.0 7.0 7.7 9.0 11.0
(I)_amperes
Generated 46 88 126 149 154 162 168
e.m.f. (e)_Volts

2024/OCT/Q7

Q8. a) Explain how excitation of the rotor is produced and supplied. (6)
b) A 75-kW, 400-V, 4-pole, 3-phase star connected synchronous motor has a resistance and
synchronous reactance per phase of 0.04 Ohm and 0.4 Ohm respectively. Compute for full-load 0.8 p.f.
lead the open circuit e.m.f. per phase and mechanical power developed. Assume an efficiency of 92.5%.
(10)
2024/OCT/Q8

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
Q9.a) Explain the principles of A.C. Motors starting and speed control, including the effect on efficiency.
(6)
b) A 3-phase induction motor has a 4-pole, Y-connected stator winding. The motor runs on 50-Hz
supply with 200V between lines. The motor resistance and standstill reactance per phase are 0.1 Ω and
0.9 Ω respectively. Calculate (a) the total torque at 4% slip (b) the maximum torque (c) the speed at
maximum torque if the ratio of the rotor to stator turns is 0.67. Neglect stator impedance. (10)
2024/OCT/Q9

Q10.a) Draw the complete phasor diagram of the transformer under no-load conditions. (6)
b) The following results were obtained on a 50 KVA transformer: open circuit test-primary voltage, 3300
V. secondary voltage, 415 V. primary power, 430 W. Short circuit test primary voltage, 124 V. primary
current, 15.3 A. primary power, 525 W. secondary current full load value. Calculate: (10)
(i) The efficiencies at full load and at half load for 0.7 power factor
(ii) The Voltage regulations for power factor 0.7 (i) lagging, (ii) leading
(iii) The secondary terminal voltages corresponding to (i) and (ii)
2024/OCT/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

FEBRUARY 2024
SR.NO. 22224 - 1

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2024)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I
Q1. Differentiate with the aid of simple sketches between the following types of electronic circuits; (16)
A. Rectifier circuit
B. Amplifier circuit
C. Oscillator circuit
2010/SR9 2012/SR1 2012/SR2 2012/SR4 2012/SR9 2013/SR10 2013/SR12 2014/SR11
2015/SR01 2015/SR04 2015/SR12 2016/SR07 2016/SR08 2017/SR12 2018/SR07 2018/SR09
2019/JAN 2019/JULY 2021/AUG/Q4 2022/JAN/Q4 2022/FEB/Q3 2022/MAR/Q1 2024/FEB/Q1

Q2. With reference to U.M.S. operations:


A. State with reasons the essential requirements for unattended machinery spaces. (8)
B. As second Engineer, describe how you would respond to the irretrievable failure of the Machinery
space fire alarm system whilst the ship is on voyage. (8)
2009/SR2 2008/SR10 2008/SR3 2007/SR7 2007/SR3 2010/SR12 2011/SR7
2010/SR9 2010/SR7 2010/SR6 2010/SR4 2011/SR11 2012/SR4 2012/SR8
2013/SR07 2013/SR11 2013/SR12 2014/SR06 2014/SR12 2015/SR01 2015/SR7

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
2016/SR4 2016/SR04 2017/SR12 2019/APR 2019/OCT 2019/DEC 2020/NOV/Q2
2021/APR/Q4 2021/JUL/Q3 2021/SEP/Q5 2021/NOV/Q4 2022/APR/Q2 2023/JAN/Q4 2024/FEB/Q2

Q3. Explain the matching of an induction electric motor to a pump required for main circulating duty,
with the aid of pump characteristic and torque/ship diagrams. (16)
2010/SR09 2019/APR 2019/JULY 2019/OCT 2022/NOV/Q2 2024/FEB/Q3

Q4. With reference to a three phase shipboard electrical distribution system:


A. Enumerate the advantages of an insulated neutral system. (4)
B. Enumerate the disadvantages of an insulated neutral system. (4)
C. Describe how the earthed neutral system is Earthed. (4)
D. Compare the use of an insulated neutral system as opposed to the use of an Earthed neutral System
with regard to the risk of electric shock from either system. (4)
2009/SR8 2008/SR8 2007-8/EM 2005/SR9 2007/SR5 2006/SR9 2008/SR6
2011/SR12 2012/SR2 2012/SR9 2014/SR07 2014/SR11 2015/SR09 2017/SR09
2024/FEB/Q4

Q5. a) Sketch a magnetic overload device incorporating a dashpot and explain how the current and time
settings of the device may be varied. (8)
b) With the aid of a sketch outline the essential features of a three stage “preferential tripping” scheme
for the main generators of a ship. (8)
2024/FEB/Q5

SECTION – II
Q6. a) Explain the applications of PN junction diode. (6)
b) A full-wave, 1 -phase rectifier employs a double diode valve, the internal resistance of each element
of which may be assumed constant at 500 . The transformer r.m.s. secondary voltage from the centre-
tap to each anode is 300 V and the load has a resistance of 2000 . Evaluate: (10)
(i) mean load current.
(ii) r.m.s. value of load current
(iii) the d.c. output power
(iv) the input power to the anode circuit
(v) the rectification efficiency
2023/FEB/Q6 2024/FEB/Q6

Q7. A. What is back emf? Derive the relation for the back emf and the supplied voltage in terms of
armature resistance. (6)
b) An 8kw, 230V, 1200 rpm d.c shunt motor has Ra = 0.7. The field current is adjusted until, on no-
load with a supply of 250V, the motor runs at 1250 rpm and draws armature current of 1.6 amps. A

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
load torque is then applied to the motor shaft which causes la to raise to 40 A and the speed falls to
1150 rpm. Determine the reduction in the flux per pole due to the armature reaction. (10)
2023/FEB/Q7 2024/FEB/Q7

Q8. A. What are the factors which determine the synchronous speed of a motor? (6)
B. The star-connected rotor of an induction motor has a stand-still resistance of 4.5 ohms/phase and a
resistance of 0.5𝛀/phase. The motor has an induced emf of 50 V between the slip-rings at stand-still
on open circuit when connected to its normal supply voltage. Find the current in each phase and the
power factor at start when the slip-ring is short-circuited. (10)
2010/SR3 2012/SR09 2022/AUG/Q8 2022/SEP/Q08 2023/FEB/Q8 2024/FEB/Q8

Q9. a) Explain how drooping characteristics cater for stable operation when running in parallel. (6)
b) Two shunt generators X and Y work in parallel. Their external characteristics may be assumed to be
a linear over their normal working range the terminal voltage of X falls 265V on no load 230V when
delivering 350Ato the busbars, while the voltage of Y falls from 270 V on no load to 240V when
delivering 400A to the bus bars. Calculate the current with each machine delivers when they share a
common load of 500A. what is thw bus bar voltage under this condition and the power delivered by
each machine. (10)
2023/FEB/Q9 2024/FEB/Q9

Q10. a) Describe how protection against short circuit is provided. (6)


b) An eight – pole alternator running at a speed of 720rev/min supplies current to synchronous and
induction motors with forty – eight poles. Calculate the frequency and speed of rotation of the motors
if the induction motor runs with 2 percent slip. (10)
2023/FEB/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

FEBRUARY 2023
SR.NO.MET-2302

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2023)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I
Q1. Sketch a circuit diagram for an automatic voltage regulator illustrating how the A.V.R. utilizes a
Silicon-controlled rectifier to control the excitation system for an alternator.
Describe how the A.V.R. monitors output and controls the excitation system.
2011/SR12 2014/SR07 2015/SR09 2017/SR09 2018/SR10 2018/SR12 2019/MAR
2020/DEC/Q1 2021/MAR/Q2 2021/APR/Q1 2021/SEP/Q2 2021/DEC/Q2 2023/FEB/Q1

Q2. Diesel electric propulsion is now being chosen as the power plant for an increasingly wide variety
of vessels.
(a) Sketch a simple layout of such an installation.
(b) Explain the advantages of selecting such a plant.
2011/SR4 2010/SR8 2011/SR1 2012/SR6 2012/SR7 2012/SR09 2014/SR01
2014/SR03 2014/SR4 2014/SR09 2015/SR08 2015/SR10 2016/SR10 2017/SR04
2017/SR06 2019/FEB 2019/JUN 2019/AUG 2019/SEP 2020/MAR/Q4 2020/NOV/Q3
2022/JUL/Q3 2023/FEB/Q2

Q3. In a ship's power system, the neutral on the low voltage side is not grounded, But it is mandatory
to ground the neutral in high voltage systems. Discuss in detail for the above difference and with
suitable sketches, explain the different earthling arrangements for HV system.

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
2015/SR7 2023/FEB/Q3

Q4. Describe / troubleshooting the problems in a typical PLC based system taking care of the safety
requirements. (Explain each test method according to various steps to be taken in serial order
Including setting-up of any instrument to be used)
2015/SR7 2023/FEB/Q4

Q5. Sketch and describe the method of speed control of synchronous motors by variable frequency.
State the advantages of this method over the other methods of speed control.
2015/SR3 2023/FEB/Q5

SECTION – II

6.a) Explain the applications of PN junction diode. (6)


b) A full-wave, 1 -phase rectifier employs a double diode valve, the internal resistance of each
element of which may be assumed constant at 500Ω. The transformer r. m. s. secondary voltage
from the centre-tap to each anode is 300 V and the load has a resistance of 2000Ω Evaluate:- (10)
(i) means load current.
(ii) r.m.s. value of load current
(iii) the d.c. output power
(iv) the input power to the anode circuit
(v) the rectification efficiency
2023/FEB/Q6

Q7. A. What is back emf? Derive the relation for the back emf and the supplied voltage in terms of
armature resistance.
b) An 8kw, 230V, 1200 rpm d.c shunt motor has Ra = 0.7Ω. The field current is adjusted until, on no-
load with a supply of 250V, the motor runs at 1250 rpm and draws armature current of 1.6 amps. A
load torque is then applied to the motor shaft which causes la to raise to 40 A and the speed falls to
1150 rpm. Determine the reduction in the flux per pole due to the armature reaction.
2023/FEB/Q7

Q8. A. What are the factors which determine the synchronous speed of a motor?
B. The star-connected rotor of an induction motor has a stand-still resistance of 4.5 ohms/phase and a
resistance of 0.5𝛀𝛀/phase. The motor has an induced emf of 50 V between the slip-rings at stand-still
on open circuit when connected to its normal supply voltage. Find the current in each phase and the
power factor at start when the slip-ring is short-circuited.
2010/SR3 2012/SR09 2022/AUG/Q8 2022/SEP/Q08 2023/FEB/Q8

Q9. a) Explain how drooping characteristics cater for stable operation when running in parallel. (6)
b) Two shunt generators X and Y work in parallel. Their external characteristics may be assumed to be
a linear over their normal working range the terminal voltage of X falls 265V on no load 230V when
delivering 350Ato the busbars, while the voltage of Y falls from 270 V on no load to 240V when
delivering 400A to the bus bars. Calculate the current with each machine delivers when they share a
common load of 500A. what is thw bus bar voltage under this condition and the power delivered by
each machine
2023/FEB/Q9

Q10. A. Describe how protection against short circuit is provided in a 3 phase induction motor circuit.

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
b) An eight – pole alternator running at a speed of 720rev/min supplies current to synchronous and
induction motors with forty – eight poles. Calculate the frequency and speed of rotation of the motors
if thr induction motor runs with 2 percent slip.
2023/FEB/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

MARCH 2023
SR.NO.MET-2303

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2023)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I
Q1. What is a marine high voltage system? Sketch and describe a shipboard high voltage switch board
and its protective devices.
2012/SR12 2013/SR1 2014/SR10 2015/SR03 2016/SR06 2017/SR07 2018/SR03
2023/MAR/Q1

Q2. What is soft starting of an Induction motor? Describe with a circuit using thyristors used for soft
starting. Discuss its advantages and dis-advantages.
2012/SR12 2013/SR1 2014/SR10 2015/SR03 2018/SR03 2018/SR09 2019/JAN
2019/FEB 2019/APR 2019/JULY 2019/OCT 2021/FEB/Q5 2022/JAN/Q2 2023/MAR/Q2

Q3. Differentiate between half and full wave rectification. State where half wave rectification may be
used and the purpose for which it is not well adapted. Sketch a bridge connection by which full wave
rectification may be obtained.
2011/SR10 2012/SR12 2011/SR10 2014/SR10 2016/SR06 2018/SR03 2023/MAR/Q3

Q4. A. Describe with the aid of a simple sketch the arrangement of the three-phase winding of an
alternator showing the neutral point.
B. Explain why for most ships the neutral point is insulated.
C. Explain why in some installation the neutral point is earthed?
2011/SR10 2012/SR12 2014/SR10 2018/SR03 2021/JAN/Q3 2021/FEB/Q3 2021/APR/Q4

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
2021/JUL/Q1 2021/AUG/Q3 2022/JAN/Q3 2022/FEB/Q4 2023/MAR/Q4

Q5. Explain the effect of reduced voltage on standard cage motors with respect to EACH of the following:
(i) Burn out; (ii) Starting current; (iii) Starting torque; (iv) Speed.
2014/SR10 2013/SR12 2014/SR07 2012/SR12 2012/SR03 2011/SR10 2015/SR01
2016/SR06 2017/SR12 2018/SR03 2019/JUN 2019/SEP 2023/MAR/Q5
SECTION – II
Q6. A. Describe the effect of the following loads on power factor: -
(i) Induction motors; (ii) Transformers; (iii) Partly loaded motors; (iv) Cage type motors.
B. In a 50-Kav, star-connected, 440-V, 3-phase, 50-Hz alternator, the effective armature resistance is
0.25 ohm per phase. The synchronous reactance is 3.2 ohm per phase and leakage reactance is 0.5
ohm phase. Determine at rated load and unity power factor:
(a) Internal e.m.f Ea (b) no-load e.m.f E0 (c) percentage regulation on full-load (d) value of synchronous
reactance which replaces armature reaction.
2010/SR11 2010/SR7 2011/SR11 2012/SR11 2014/SR10 2014/SR08 2023/MAR/Q6

Q7. A. By means of a schematic circuit diagram illustrate the peak rectifier. If the supply voltage is v(t)
= Vm Sin wt, what is the voltage across the load resistor?
B. A battery-charging circuit is shown below in Fig. The forward resistance of the diode can be
considered negligible and the reverse resistance infinite. The internal resistance of the battery is
negligible. Calculate the necessary value of the variable resistance R so that the battery charging current
is 1.0 A.

2011/SR7 2010/SR7 2011/SR4 2010/SR11 2011/SR11 2012/SR4 2012/SR7


2012/SR11 2013/SR08 2014/SR01 2014/SR08 2014/SR10 2015/SR03 2015/SR4
2016/SR12 2018/SR04 2018/SR07 2020/JAN 2021/MAR/Q8 2021/JUL/Q8 2021/SEP/Q9
2022/JUN/Q7 2022/OCT/Q7 2023/JAN/Q7 2023/MAR/Q7

Q8. A. Why is it important to maintain high efficiency of operation and low values of voltages regulation
for power transformers?
B. A 100 KVA transformer has 400 turns on the primary and 80 turns on the secondary. The primary
and secondary resistances are 0.3 𝛀 and 0.01 𝛀 respectively, and the corresponding leakage
reactance’s are 1.1 𝛀 and 0.035 𝛀 respectively. The supply voltage is 2200 V. Calculate:
(i) The equivalent impedance referred to the primary circuit;
(ii) The voltage regulation and secondary terminal voltage for full load having a power factor of (a) 0.8
lagging and (b) 0.8 leading.
2011/SR7 2010/SR9 2010/SR7 2011/SR4 2010/SR11 2011/SR11 2012/SR7
2012/SR11 2013/SR08 2014/SR01 2014/SR08 2014/SR10 2015/SR03 2016/SR4
2016/SR12 2018/SR04 2019/APR 2019/JULY 2019/OCT 2019/NOV 2020/MAR/Q8
2022/OCT/Q8 2023/JAN/Q8

Q9. A. Explain the working principal of a 3 phase induction motor. What are the various types of rotors?
B. An 18.65Kw, 6-pole, 50Hz, 3 phase slip ring induction motor runs at 960 rpm on full load with a
rotor current per phase of 35A, allowing 1Kw for mechanical losses, find the resistance per phase of 3-
phase rotor winding.
2014/SR4 2014/SR10 2016/SR12

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
Q10. A. Which of the following three motors has the poorest speed regulation: shunt motor, series
Motor or cumulative compound motor? Explain.
B. A 440V shunt motor takes an armature current of 30A at 700 rev/min. The armature resistance is
0.7ohm. If the flux is suddenly reduced by 20 per cent, to what value will the armature current rise
momentarily? Assuming unchanged resisting torque to motion, what will be the new steady values of
speed and armature current? Sketch graphs showing armature current and speed as functions of time
during the transition from initial to final, steady-state conditions.
2009/SR2 2008/SR9 2007/SR9 2007/SR4 2006/SR4 2010/SR11 2010/SR7
2010/SR4 2011/SR11 2012/SR3 2012/SR6 2012/SR9 2012/SR11 2013/SR4
2014/SR06 2014/SR08 2014/SR10 2015/SR10 2015/SR12 2016/SR16 2019/MAR
2019/JUN 2019/SEP 2019/DEC 2022/OCT/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

JUNE 2024
SR.NO. MET - 2406

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2024)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I
Q1. With reference to electronic control systems
A. Draw a simple block diagram for temperature control. (8)
B. Describe each component shown in the diagram in (a). (8)
2011/SR9 2010/SR8 2011/SR4 2011/SR1 2010/SR10 2010/SR3 2010/SR4
2011/SR12 2011/SR3 2012/SR09 2014/SR03 2014/SR07 2014/SR09 2015/SR08
2015/SR09 2015/SR10 2016/SR02 2016/SR10 2016/SR11 2017/SR04 2017/SR06
2017/SR09 2018/SR12 2022/SEP/Q5 2023/OCT/Q2 2024/JAN/Q5 2024/MAR/Q2 2024/JUN/Q1

Q2. Compare methods of obtaining speed regulation of three-phase induction motors generally used in
tankers by means of:
A. Rotor resistance.
B. Cascade system.
C. Pole-changing.
Give examples where each system may be employed with advantage. (16)
2014/SR06 2014/SR08 2018/SR08 2019/DEC 2020/DEC/Q3 2021/JAN/Q5 2021/SEP/Q3
2021/DEC/Q3 2022/AUG/3 2022/OCT/Q2 2023/APR/Q2 2024/JUN/Q2

Q3. With reference to a 3 speed A.C. cage motor driven cargo winch:
A. Sketch a circuit diagram for a pole change motor. (8)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
B. Describe how speed change and braking are achieved. (8)
2009/SR6 2008/SR4 2007/SR8 2006/SR8 2011/SR8 2010/SR2 2010/SR1
2011/SR2 2012/SR11 2014/SR02 2014/SR08 2018/SR08 2018/SR12 2022/OCT/Q4
2023/APR/Q4 2023/JUNE/Q4 2023/SEP/Q4 2024/JUN/Q3

Q4. What is a marine high voltage system? Sketch and describe a shipboard high voltage switch board
and its protective devices. (16)
2012/SR12 2013/SR1 2014/SR10 2015/SR03 2016/SR06 2017/SR07 2018/SR03
2023/MAR/Q1 2024/JUN/Q4

Q5. Differentiate between half and full wave rectification. State where half wave rectification may be
used and the purpose for which it is not well adapted. Sketch a bridge connection by which full wave
rectification may be obtained. (16)
2011/SR10 2012/SR12 2011/SR10 2014/SR10 2016/SR06 2018/SR03 2023/MAR/Q3
2023/AUG/Q1 2024/JUN/Q5

SECTION – II
Q6. A. Explain what is meant by the terms wave form, frequency and average value. (6)
B. A moving coil ammeter, a thermal ammeter and a rectifier are connected in series with a resistor
across a 110 V sinusoidal a.c. supply. The circuit has a resistance of 50 𝛀 to current in one direction
and, due to the rectifier, an infinite resistance to current in the reverse direction. Calculate:
(i) The readings on the ammeters.
(ii) The form and peak factors of the current wave. (10)
2012/SR02 2019/APR 2019/JULY 2019/OCT 2019/NOV 2024/JUN/Q6 202

Q7. A. Why is it important to maintain high efficiency of operation and low values of voltages regulation
for power transformers? (6)
B. A 100 KVA transformer has 400 turns on the primary and 80 turns on the secondary. The primary
and secondary resistances are 0.3 𝛀 and 0.01 𝛀 respectively, and the corresponding leakage reactances
are 1.1 𝛀 and 0.035 𝛀 respectively. The supply voltage is 2200 V. Calculate:
(i) The equivalent impedance referred to the primary circuit.
(ii) The voltage regulation and secondary terminal voltage for full load having a power factor of (a) 0.8
lagging and (b) 0.8 leading. (10)
2011/SR7 2010/SR9 2010/SR7 2011/SR4 2010/SR11 2011/SR11 2012/SR7
2012/SR11 2013/SR08 2014/SR01 2014/SR08 2014/SR10 2015/SR03 2016/SR4
2016/SR12 2018/SR04 2019/APR 2019/JULY 2019/OCT 2019/NOV 2020/MAR/Q8
2022/OCT/Q8 2023/JAN/Q8 2023/MAR/Q8 2023/JUNE/Q8 2024/JUN/Q7

Q8. A. List the factors that determine the starting torque of the three-phase induction motor. How does
this torque generally compare with the value of the rated torque? (6)
B. The low-voltage release of an A.C. motor-starter consists of a solenoid into which an iron plunger is
drawn against a spring. The resistance of the solenoid is 35 ohms. When connected to a 220 V, 50 Hz,
A.C. supply the current taken is at first 2 A, and when the plunger is drawn into the “full-in” position
the current falls to 0.7 A. Calculate the inductance of the solenoid for both positions of the plunger, and
the maximum value of flux-linkages in weber-turns for the “full-in” position of the plunger. (10)
2009/SR7 2009/SR6 2008/SR10 2008/SR8 2008/SR4 2008/SR3 2011/SR7
2013/SR11 2011/SR1 2010/SR6 2011/SR4 2012/SR7 2012/SR12 2013/SR08
2013/SR10 2014/SR03 2015/SR03 2015/SR08 2016/SR4 2010/SR8 2014/SR01
2010/SR9 2016/SR06 2016/SR11 2017/SR07 2018/SR04 2018/SR11 2019/APR
2019/JULY 2019/OCT 2019/NOV 2020/NOV/Q9 2023/JAN/Q9 2023/JUNE/Q9 2023/OCT/Q9
2024/JUN/Q8

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
Q9. A. With the aid of delta and star connection diagrams, state the basic equation from which delta
– star and star – delta conversion equation can be derived. (6)
B. Three batteries A, B and C have their negative terminals connected together, between the positive
terminals of A and B there is a resistor of 0.5 ohm and between B and C there is a resistor of 0.3 ohm.
(10)
i. Battery A 105 V, Internal resistance 0.25 ohm
ii. Battery B 100 V, Internal resistance 0.2 ohm
iii. Battery C 95 V, Internal resistance 0.25 ohm
Determine the current values in the two resistors and the power dissipated by them.
2009/SR6 2008/SR10 2008/SR4 2007/SR7 2011/SR7 2010/SR9 2011/SR1
2010/SR8 2012/SR7 2013/SR11 2014/SR01 2014/SR03 2015/SR03 2015/SR08
2016/SR4 2017/SR7 2018/SR04 2019/APR 2019/JULY 2019/NOV 2020/OCT/Q6
2023/JAN/Q10 2023/JUNE/Q10 2023/OCT/Q10 2024/JUN/Q9

Q10. A. Compare the effectiveness of a current limiting circuit breaker with that of a HRC fuse. (6)
B. A coil having a resistance of 10 Ohm, and an inductance of 0.15 H is connected in series with a
capacitor across a 100 V, 50 Hz supply. If the current and the voltage are in phase what will be the
value of the current in the circuit and the voltage drop across the coil? (10)
2014/SR4 2018/SR10 2019/MAR 2019/APR 2019/JUN 2019/JULY 2019/SEP
2019/OCT 2019/NOV 2019/DEC 2020/JAN 2020/OCT/Q10 2021/FEB/Q10 2021/MAR/Q9

2021/APR/Q8 2021/JUL/Q9 2021/SEP/Q10 2022/MAR/Q10 2023/SEP/Q10 2024/MAR/Q10 2024/JUN/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

JANUARY 2023
SR.NO.MET-2301

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2023)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I
Q1. A. Explain why it is necessary to have reverse power protection for alternators intended for
operation.
B.(i) Sketch a reverse power trip;
(ii) Explain briefly the principle on which the operation of this power trip is based and how tripping is
activated.
2009/SR2 2008/SR10 2008/SR3 2007/S7 2007/SR6 2010/SR12 2011/SR7
2010/SR7 2010/SR7 2010/SR6 2011/S1 2012/SR1 2013/SR4 2013/SR11
2013/SR12 2015/SR12 2016/SR4 2018/SR1 2020/OCT/Q3 2020/DEC/Q4 2021/JUL/Q2
2021/JUL/Q4(M) 2021/OCT/Q3 2023/JAN/Q1

Q2. A. Describe a brush less alternator with a.c. exciter static A.V.R.;
B. State the output voltage characteristics for this type of machine.
2009/SR2 2008/SR10 2008/SR3 2006-7/EM 2007/SR7 2005/SR1 2006/SR3
2006/SR1 2010/SR12 2011/SR7 2010/SR7 2010/SR6 2010/SR3 2010/SR3
2011/SR11 2013/SR11 2016/SR4 2020/NOV/Q5 2022/APR/Q4 2023/JAN/Q2

Q3. With the aid of sketch describe the main features and principle of operation of a D.C. moving Coil
meter. If such a meter is designed to give full scale deflection with 150 Ma, State how it May be
adapted; (i) As an ammeter to read up to 150 A; (ii) As a voltmeter to read up to 150 V.; No
calculations are required.

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
2009/SR2 2008/SR10 2008/SR3 2007/SR7 2010/SR12 2011/SR7 2010/SR7
2010/SR11 2010/SR6 2011/SR11 2013/SR11 2016/SR4 2023/JAN/Q3

Q4. With reference to U.M.S. operations:


A. State with reasons the essential requirements for unattended machinery spaces;
B. As second Engineer, describe how you would respond to the irretrievable failure of the Machinery
space fire alarm system whilst the ship is on voyage.
2009/SR2 2008/SR10 2008/SR3 2007/SR7 2007/SR3 2010/SR12 2011/SR7
2010/SR9 2010/SR7 2010/SR6 2010/SR4 2011/SR11 2012/SR4 2012/SR8
2013/SR07 2013/SR11 2013/SR12 2014/SR06 2014/SR12 2015/SR01 2015/SR7
2016/SR4 2016/SR04 2017/SR12 2019/APR 2019/OCT 2019/DEC 2020/NOV/Q2
2021/APR/Q4 2021/JUL/Q3 2021/SEP/Q5 2021/NOV/Q4 2022/APR/Q2 2023/JAN/Q4

Q5. With reference to preferential tripping in a marine electrical distribution system.


A. With the aid of a sketch, describe a typical arrangement to provide three stages of tripping an
instantaneous protection against short circuit.
B. State why this protection is required;
2010/SR6 2010/SR7 2010/SR11 2011/SR7 2011/SR10 2011/SR11 2013/SR1
2013/SR4 2013/SR11 2015/SR3 2016/SR04 2018/SR11 2021/JAN/Q4 2021/APR/Q5
2021/NOV/Q3 2021/DEC/Q4 2022/FEB/Q5 2022/JUL/Q4 2023/JAN/Q5

SECTION – I

Q6. (a). Explain the significance of the root mean square value of an alternating current or voltage
waveform; Define the form factor of such a wave form.
(b). A total load of 8000 kW at 0.8 power factor is supplied by two alternators in parallel. One alternator
supplies 6000 kW at 0.9 power factor. Find the KVA rating of the other alternator and the power factor.
2011/SR8 2011/SR4 2011/SR7 2010/SR8 2010/SR2 2010/SR1 2012/SR4
2011/SR1 2012/SR7 2012/SR12 2013/SR08 2013/SR11 2014/SR01 2014/SR03
2015/SR03 2015/SR08 2016/SR4 2016/SR07 2018/SR04 2018/SR07 2018/SR08
2018/SR09 2018/SR11 2018/SR12 2020/JAN 2020/OCT/Q9 2020/DEC/Q6 2021/JAN/Q8
2021/FEB/Q8 2021/MAR/Q10 2021/APR/Q6 2021/JUL/Q10 2023/JAN/Q6

Q7. A. By means of a schematic circuit diagram illustrate the peak rectifier. If the supply voltage is v(t)
= Vm Sin wt, what is the voltage across the load resistor?
B. A battery-charging circuit is shown below in Fig. The forward resistance of the diode can be
considered negligible and the reverse resistance infinite. The internal resistance of the battery is
negligible. Calculate the necessary value of the variable resistance R so that the battery charging current
is 1.0 A.

2011/SR7 2010/SR7 2011/SR4 2010/SR11 2011/SR11 2012/SR4 2012/SR7


2012/SR11 2013/SRSR08 2014/SR01 2014/SR08 2014/SR10 2015/SR03 2015/SR4
2016/SR12 2018/SR04 2018/SR07 2020/JAN 2021/MAR/Q8 2021/JUL/Q8 2021/SEP/Q9
2022/JUN/Q7 2022/OCT/Q7 2023/JAN/Q7

Q8. A. Why is it important to maintain high efficiency of operation and low values of voltages regulation
for power transformers?
B. A 100 KVA transformer has 400 turns on the primary and 80 turns on the secondary. The primary
and secondary resistances are 0.3 𝛀𝛀 and 0.01 𝛀𝛀 respectively, and the corresponding leakage
reactance’s are 1.1 𝛀𝛀 and 0.035 𝛀𝛀 respectively. The supply voltage is 2200 V. Calculate:

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
(i) The equivalent impedance referred to the primary circuit;
(ii) The voltage regulation and secondary terminal voltage for full load having a power factor of (a) 0.8
lagging and (b) 0.8 leading.
2011/SR7 2010/SR9 2010/SR7 2011/SR4 2010/SR11 2011/SR11 2012/SR7
2012/SR11 2013/SR08 2014/SR01 2014/SR08 2014/SR10 2015/SR03 2016/SR4
2016/SR12 2018/SR04 2019/APR 2019/JULY 2019/OCT 2019/NOV 2020/MAR/Q8
2022/OCT/Q8 2023/JAN/Q8

Q9. A. List the factors that determine the starting torque of the three-phase induction motor. How does
this torque generally compare with the value of the rated torque?
B. The low-voltage release of an a.c. motor-starter consists of a solenoid into which an iron plunger is
drawn against a spring. The resistance of the solenoid is 35 ohm. When connected to a 220 V, 50 Hz,
a.c. 3supply the current taken is at first 2A, and when the plunger is drawn into the “full-in” position
the current falls to 0.7 A. Calculate the inductance of the solenoid for both positions of the plunger, and
the maximum value of flux-linkages in weber-turns for the “full-in” position of the plunger.
2009/SR7 2009/SR6 2008/SR10 2008/SR8 2008/SR4 2008/SR3 2011/SR7
2013/SR11 2011/SR1 2010/SR6 2011/SR4 2012/SR7 2012/SR12 2013/SR08
2013/SR10 2014/SR03 2015/SR03 2015/SR08 2016/SR4 2010/SR8 2014/SR01
2010/SR9 2016/SR06 2016/SR11 2017/SR07 2018/SR04 2018/SR11 2019/APR
2019/JULY 2019/OCT 2019/NOV 2020/NOV/Q9 2023/JAN/Q9

Q10. A. With the aid of delta and star connection diagrams, state the basic equation from which delta
– star – delta conversion equation can be derived.
B. Three batteries A, B and C have their negative terminals connected together, between the positive
terminals of A and B there is a resistor of 0.5 ohm and between B and C three is a resistor of 0.3 ohm,
i. Battery A 105 V, Internal resistance 0.25 ohm’
ii. Battery B 100 V, Internal resistance 0.2 ohm
iii. Battery C 95 V, Internal resistance 0.25 ohm
Determine the current values in the two resistors and the power dissipated by them.
2009/SR6 2008/SR10 2008/SR4 2007/SR7 2011/SR7 2010/SR9 2011/SR1
2010/SR8 2012/SR7 2013/SR11 2014/SR01 2014/SR03 2015/SR03 2015/SR08
2016/SR4 2017/SR7 2018/SR04 2019/APR 2019/JULY 2019/NOV 2020/OCT/Q6
2023/JAN/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

DECEMBER 2024
SR.NO. MET - 2412

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2024)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices
that runs on windows | iOS | mac OS | android OS| Devices such as phones,
computers, mobiles, tablets etc.
Please click here to purchase our original books. we have solved all past exam
papers of last 15 years. clean content, cad drawing with our 15 years of expertise
in maritime publishing.

SECTION – I

Q1. With reference to a three-phase shipboard electrical distribution system: (16)


a) Enumerate the advantages of an insulated neutral system.
b) Enumerate the disadvantages of an insulated neutral system.
c) Describe how the earthed neutral system is Earthed.
d) Compare the use of an insulated neutral system as opposed to the use of an Earthed neutral System
with regard to the risk of electric shock from either system.
2009/SR8 2008/SR8 2007-8/EM 2005/SR9 2007/SR5 2006/SR9 2008/SR6
2011/SR12 2012/SR2 2012/SR9 2014/SR07 2014/SR11 2015/SR09 2017/SR09
2024/FEB/Q4 2024/MAR/Q5 2024/DEC/Q1

Q2. a) i. Describe the characteristics of a D.C. motor. (8)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
ii. Explain the advantages of such a motor for deck machinery.
b) Describe with the aid of a sketch a control system for the motor in (A). (8)
2012/FEB/Q2 2012/OCT/Q2 2014/NOV/Q2 2024/DEC/Q2

Q3. List at least two factors that cause deterioration of the frequency response of a transistor amplifier.
Explain how each factor affects the performance of the amplifier and the portion of the frequency range
where it is effective. (16)
2012/SR1 2012/SR2 2012/SR9 2013/SR03 2014/SR11 2015/SR12 2024/DEC/Q3

Q4. Differentiate with the aid of simple sketches between two of the following types of electronic circuits.
A. Rectifier circuit (6)
B. Amplifier circuit (5)
C. Oscillator circuit (5)
-------------------------------------------PREVIOUSLY ASKED---------------------------------------------------
Q4. Differentiate with the aid of simple sketches between the following types of electronic circuits.
A. Rectifier circuit (6)
B. Amplifier circuit (5)
C. Oscillator circuit (5)
2010/SR9 2012/SR1 2012/SR2 2012/SR4 2012/SR9 2013/SR10 2013/SR12 2014/SR11
2015/SR01 2015/SR04 2015/SR12 2016/SR07 2016/SR08 2017/SR12 2018/SR07 2018/SR09
2019/JAN 2019/JULY 2021/AUG/Q4 2022/JAN/Q4 2022/FEB/Q3 2022/MAR/Q1 2024/FEB/Q1 2024/DEC/Q4

Q5. a) Describe the circuit breaker for an a.c. generator using a sketch to show how arcing is controlled.
(6)
b) Explain the sequence of events that might occur if the breaker opens on a short circuit and state the
check you would require following such event. (5)
c) Give a safe procedure to follow should a main circuit breaker fail to open under fault Condition. (5)
2008/SR2 2008/SR1 06-7/EM 2005/SR9 2010/SR9 2012/SR2 2012/SR9
2013/SR09 2014/SR11 2016/SR01 2021/APR/Q3 2022/DEC/Q1 2024/DEC/Q5

SECTION – II

Q6. A. Explain what is meant by the terms wave form, frequency and average value. (6)
B. A moving coil ammeter, a thermal ammeter and a rectifier are connected in series with a resistor
across a 110 V sinusoidal A.C. supply. The circuit has a resistance of 50 𝛀 to current in one direction
and, due to the rectifier, an infinite resistance to current in the reverse direction. Calculate:
(i) The readings on the ammeters.
(ii) The form and peak factors of the current wave. (10)
2012/SR02 2019/APR 2019/JULY 2019/OCT 2019/NOV 2024/JUN/Q6 2024/AUG/Q6
2024/DEC/Q6

Q7. A. What is leakage flux as it applies to the iron-core transformer? How is it taken into account in
the analysis of the transformer? (6)
B. The following results were obtained on a 50 KVA transformer: open circuit test-primary voltage, 3300
V; secondary voltage, 415 V; primary power, 430 W. Short circuit test-primary voltage, 124 V; primary
current, 15.3 A; primary power, 525 W; secondary current, full load value. Calculate:
(i) The efficiencies at full load and at half load for 0.7 power factor
(ii) The Voltage regulations for power factor 0.7 (i) Lagging, (ii) Leading
(iii) The secondary terminal voltages corresponding to (i) and (ii). (10)
2012/SR1 2012/SR2 2013/SR07 2013/SR12 2014/SR02 2014/SR12 2024/DEC/Q7

Q8. A. What is Silicon controlled rectifier (SCR)? How is the breakover voltage of the SCR defined? (6)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
B. A d.c. motor takes an armature current of 110 A at 480 V. The resistance of the armature circuit is
0.2𝛀. The machine has six poles and the armature is lap-connected with 864 conductors. The flux per
pole is 0.05 Wb. Calculate: (a) The speed; (b) The gross torque developed by the armature. (10)
2011/SR9 2010/SR6 2010/SR10 2011/SR12 2012/SR1 2012/SR2 2013/SR10 2013/SR12 2014/SR02
2014/SR12 2024/DEC/Q8

Q9. A. List the factors that determine the maximum developed torque of the induction motor. (6)
B. The primary and secondary windings of a 500 KVA transformer have resistance of 0.42 Ω and 0.0019
Ω respectively. The primary and secondary voltages are 11000 V and 415 V respectively and the core
loss is 2.9 kW, assuming the power factor of the load to be 0.8. Calculate the efficiency on (i) Full load
(ii) Half load. (10)
2024/DEC/Q9

Q10. A 100 kW, 460 V shunt generator was run as a motor on no load at its rated voltage and speed.
The total current taken was 9.8 A, including a shunt current of 2.7 A. The resistance of the armature
circuit at normal working temperature was 0.11𝛺 Calculate the efficiencies at i. Full load; ii. Half load.
(16)
2012/SR1 2012/SR2 2013/SR12 2014/SR02 2014/SR12 2024/DC/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

APRIL 2024
SR.NO. MET - 2404

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2024)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I
Q1. Differentiate between squirrel cage and wound rotor motor of the three phases: a.c. induction. In
respect of the following: (16)
A. Rotor construction,
B. Torque characteristic,
C. Speed variation.
2012/SR6 2012/SR7 2013/SR8 2013/SR09 2013/SR01 2014/SR01 2015/SR02
2015/SR7 2016/SR03 2016/SR8 2016/SR09 2017/SR01 2017/SR02 2017/SR03
2017/SR11 2018/SR01 2018/SR02 2018/SR04 2018/SR06 2020/OCT/Q1 2022/MAR/Q3
2023/JULY/Q1 2023/DEC/Q1 2024/APR/Q1

Q2. With reference to an emergency source of electrical power in cargo ships: (16)
A. Describe a typical power source.
B. Give a typical list of essential services, which must be supplied simultaneously;
C. Explain how the emergency installation can be periodically tested.
2009/SR7 2008/SR9 2007/SR4 2011/SR4 2010/SR8 2011/SR1 2011/SR3
2012/SR6 2012/SR09 2013/SR6 2013/SR10 2014/SR03 2014/SR09 2015/SR02
2015/SR04 2015/SR07 2015/SR08 2015/SR10 2016/SR03 2016/SR09 2016/SR10
2017/SR1 2017/SR2 2017/SR03 2017/SR4 2017/SR06 2017/SR11 2018/SR01
2018/SR02 2018/SR04 2018/SR06 2019/FEB 2019/JUN 2019/AUG 2019/SEP
2020/FEB/Q4 2020/OCT/Q5 2023/JULY/Q2 2023/OCT/Q4 2023/DEC/Q2 2024/APR/Q2

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2

Q3. The direct online start of squirrel cage motor is used for most electrical drives on A.C. powered
ships. Describe with sketches as necessary one method of overcoming each of the following Problems:
A. High starting current. (8)
B. Low starting torque. (8)
2009/SR7 2008/SR9 2007/SR4 2011/SR4 2011/SR1 2010/SR10 2010/SR8
2011/SR3 2012/SR06 2013/SR08 2013/SR09 2013/SR10 2014/SR03 2014/SR4
2014/SR09 2014/SR12 2015/SR02 2015/SR04 2015/SR7 2015/SR08 2015/SR10
2016/SR03 2016/SR10 2017/SR1 2017/SR2 2017/SR3 2017/SR04 2017/SR06
2017/SR07 2017/SR11 2018/SR01 2018/SR02 2018/SR04 2018/SR06 2018/SR10
2019/MAR 2019/NOV 2020/JAN 2021/APR/Q3(M) 2023/JULY/Q3 2023/OCT/Q5 2023/DEC/Q3
2024/APR/Q3

Q4. a) (i) Discuss the various hazards and problems which are associated with electric cable Insulation
in the event of fire.
(ii) Suggest remedies for these problems. (8)
b) State how the spread of fire may be reduced by the method used for installing electric cables. (8)
2006/SR3 2012/SR7 2013/SR08 2013/SR09 2014/SR01 2015/SR02 2016/SR03 2017/SR2
2017/SR03 2017/SR07 2017/SR11 2018/SR01 2018/SR02 2018/SR04 2018/SR06 2020/JAN
2020/NOV/Q4 2023/JULY/Q4 2023/DEC/Q4 2024/APR/Q4

Q5. a) What are the causes of overheating of an induction motor? (4)


b) What preventive measures are provided against damage to an induction motor in installed condition?
(3)
c) What is the purpose of ‘fuse back up protection’ provided to an induction motor? (3)
d) How does an induction motor develop torque? (3)
e) What is the condition to be satisfied for achieving maximum running torque in an induction motor?
(3)
2013/SR03 2015/SR02 2017/SR01 2017/SR11 2018/SR02 2018/SR04 2020/JAN
2021/MAR/Q4 2022/JUN/Q5 2023/JULY/Q5 2024/APR/Q5

SECTION – II
Q6. A. What are the characteristics of PN junction diode? Point out its specifications. Also point out the
significance of dynamic and static resistances. (6)
B. Draw the circuit of Half-wave rectifier and its output waveform. A diode whose internal resistance is
20𝛀 is to supply power to 1000 𝛀 load from 110 V (RMS) source. Calculate (i) peak load current, (ii)
DC load current, (iii) AC load current. (10)
2010/SR06 2011/SR12 2012/SR09 2013/SR04 2013/SR10 2014/SR03 2015/SR09
2017/SR03 2017/SR07 2017/SR09 2017/SR11 2017/SR12 2018/SR02 2018/SR03
2020/NOV/Q8 2022/JUL/Q6 2023/JULY/Q6 2023/DEC/Q6 2024/APR/Q6

Q7. A. Describe the no-load saturation characteristic of a D.C. generator. (6)


B. A d.c. motor takes an armature current of 110 A at 480 V. The resistance of the armature circuit is
0.2 𝛀. The machine has six poles and the armature is lap-connected with 864 conductors. The flux per
pole is 0.05 Wb. Calculate,
(i) The speed
(ii) The gross torque developed by the armature. (10)
2015/SR06 2015/SR09 2017/SR03 2017/SR09 2017/SR11 2017/SR12 2018/SR02 2018/SR03
2018/SR10 2021/AUG/Q7 2022/JUL/Q7 2023/JULY/Q7 2023/DEC/Q7 2024/APR/Q7

Q8. A. What is a commutator? Discuss its rectifying action in detail. (6)


B. Calculate the e.m.f. generated by a 4-pole, wave wound armature having 40 slots with 18 conductors
per slot when driven at 1000 r.p.m. The flux per pole is 0.015 wb. (10)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
2012/SR8 2015/SR02 2017/SR01 2017/SR03 2017/SR11 2018/SR02 2018/SR03
2022/JUL/Q8 2023/JULY/Q8 2023/DEC/Q8 2024/APR/Q8

Q9. A. Discuss different methods of speed control of a D.C. series motor by adjusting field ampere turns.
(6)
B. A 230 V, D.C. shunt motor runs at 1000 r.p.m and takes 5 amperes. The armature resistance of the
motor is 0.025𝛀 and shunt field resistance is 230 𝛀 Calculate the drop in speed when the motor is
loaded and takes the line current of 41 amperes. Neglect armature reaction. (10)
2022/JULY/Q9 2022/AUG/Q7 2023/JULY/Q9 2023/DEC/Q9 2024/JAN/Q7 2024/APR/Q9

Q10. A. Why is a synchronous motor not self-starting? What are the various ways in which it can be
started? (6)
B. A 500V, single phase synchronous motor gives a net output mechanical power of 7.46kW and
operates at 0.9 power factor lagging. Its effective resistance is 0.8 Ω. If the iron and friction losses are
500 w and excitation losses are 800w, calculate the armature current and the commercial efficiency.
(10)
2015/SR02 2016/SR03 2016/SR08 2017/SR01 2017/SR03 2017/SR11 2018/SR02
2018/SR03 2022/JUL/Q10 2023/JULY/Q10 2023/DEC/Q10 2024/APR/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

JULY 2023
SR.NO.MET-2307

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2023)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I

Q1. Differentiate between squirrel cage and wound rotor motor of the three phases: a.c. induction. In
respect of the following; A. Rotor construction, B. Torque characteristic, C. Speed variation.
2012/SR6 2012/SR7 2013/SR8 2013/SR09 2013/SR01 2014/SR01 2015/SR02
2015/SR7 2016/SR03 2016/SR8 2016/SR09 2017/SR01 2017/SR02 2017/SR03
2017/SR11 2018/SR01 2018/SR02 2018/SR04 2018/SR06 2020/OCT/Q1 2022/MAR/Q3
2023/JULY/Q1

Q2. With reference to an emergency source of electrical power in cargo ships: -


A. Describe a typical power source.
B. Give a typical list of essential services, which must be supplied simultaneously;
C. Explain how the emergency installation can be periodically tested.
2009/SR7 2008/SR9 2007/SR4 2011/SR4 2010/SR8 2011/SR1 2011/SR3
2012/SR6 2012/SR09 2013/SR6 2013/SR10 2014/SR03 2014/SR09 2015/SR02
2015/SR04 2015/SR07 2015/SR08 2015/SR10 2016/SR03 2016/SR09 2016/SR10
2017/SR1 2017/SR2 2017/SR03 2017/SR4 2017/SR06 2017/SR11 2018/SR01

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
2018/SR02 2018/SR04 2018/SR06 2019/FEB 2019/JUN 2019/AUG 2019/SEP
2020/FEB/Q4 2020/OCT/Q5 2023/JULY/Q2

Q3. The direct online start of squirrel cage motor is used for most electrical drives on a.c. powered
ships. Describe with sketches as necessary one method of overcoming each of the following Problems:
A. High starting current; B. Low starting torque.
2009/SR7 2008/SR9 2007/SR4 2011/SR4 2011/SR1 2010/SR10 2010/SR8
2011/SR3 2012/SR06 2013/SR08 2013/SR09 2013/SR10 2014/SR03 2014/SR4
2014/SR09 2014/SR12 2015/SR02 2015/SR04 2015/SR7 2015/SR08 2015/SR10
2016/SR03 2016/SR10 2017/SR1 2017/SR2 2017/SR3 2017/SR04 2017/SR06
2017/SR07 2017/SR11 2018/SR01 2018/SR02 2018/SR04 2018/SR06 2018/SR10
2019/MAR 2019/NOV 2020/JAN 2021/APR/Q3 2023/JULY/Q3

Q4. A. (i) Discuss the various hazards and problems which are associated with electric cable Insulation
in the event of fire.
(ii) Suggest remedies for these problems.
B. State how the spread of fire may be reduced by the method used for installing electric cables.
2006/SR3 2012/SR7 2013/SR08 2013/SR09 2014/SR01 2015/SR02 2016/SR03 2017/SR2
2017/SR03 2017/SR07 2017/SR11 2018/SR01 2018/SR02 2018/SR04 2018/SR06 2020/JAN
2020/NOV/Q4 2023/JULY/Q4

Q5. A. What are the causes of overheating of an induction motor?


B. What preventive measures are provided against damage to an induction motor in installed condition?
C. What is the purpose of ‘fuse back up protection’ provided to an induction motor? D. How does an
induction motor develop torque?
E. What is the condition to be satisfied for achieving maximum running torque in an induction motor?
2013/SR03 2015/SR02 2017/SR01 2017/SR11 2018/SR02 2018/SR04 2020/JAN
2021/MAR/Q4 2022/JUN/Q5 2023/JULY/Q5

SECTION – II

Q6. A. What are the characteristics of PN junction diode? Point out its specifications. Also point out the
significance of dynamic and static resistances.
B. Draw the circuit of Half-wave rectifier and its output waveform. A diode whose internal resistance is
20𝛀 is to supply power to 1000 𝛀 load from 110 V (RMS) source. Calculate (i) peak load current, (ii)
DC load current, (iii) AC load current.
2010/SR06 2011/SR12 2012/SR09 2013/SR04 2013/SR10 2014/SR03 2015/SR09
2017/SR03 2017/SR07 2017/SR09 2017/SR11 2017/SR12 2018/SR02 2018/SR03
2020/NOV/Q8 2022/JUL/Q6 2023/JULY/Q6

Q7. A. Describe the no-load saturation characteristic of a d.c. generator.


B. A d.c. motor takes an armature current of 110 A at 480 V. The resistance of the armature circuit is
0.2𝛀. The machine has six poles and the armature is lap-connected with 864 conductors. The flux per
pole is 0.05 Wb. Calculate;

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
(i) The speed;
(ii) The gross torque developed by the armature.
2015/SR06 2015/SR09 2017/SR03 2017/SR09 2017/SR11 2017/SR12 2018/SR02 2018/SR03
2018/SR10 2021/AUG/Q7 2022/JUL/Q7 2023/JULY/Q7

Q8. A. What is a commutator? Discuss its rectifying action in detail.


B. Calculate the e.m.f. generated by a 4-pole, wave wound armature having 40 slots with 18 conductors
per slot when driven at 1000 r.p.m. The flux per pole is 0.015 wb.
2012/SR8 2015/SR02 2017/SR01 2017/SR03 2017/SR11 2018/SR02 2018/SR03
2022/JUL/Q8 2023/JULY/Q8

Q9. A. Discuss different methods of speed control of a d.c. series motor by adjusting field ampere turns.
B. A 230 V, d.c. shunt motor runs at 1000 r.p.m and takes 5 amperes. The armature resistance of the
motor is 0.025𝛀 and shunt field resistance is 230 𝛀 Calculate the drop in speed when the motor is
loaded and takes the line current of 41 amperes. Neglect armature reaction.
2022/JULY/Q9 2022/AUG/Q7 2023/JULY/Q9

Q10. A. Why is a synchronous motor not self-starting? What are the various ways in which it can be
started?
B. A 500V, single phase synchronous motor gives a net output mechanical power of 7.46kW and
operates at 0.9 power factor lagging. Its effective resistance is 0.8 . If the iron and friction losses are
500 w and excitation losses are 800w, calculate the armature current and the commercial efficiency.
2015/SR02 2016/SR03 2016/SR08 2017/SR01 2017/SR03 2017/SR11 2018/SR02
2018/SR03 2022/JUL/Q10 2023/JULY/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

DECEMBER 2023
SR.NO.MET-2312

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2023)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I
Q1. Differentiate between squirrel cage and wound rotor motor of the three phases: a.c. induction. In
respect of the following; (16)
A. Rotor construction,
B. Torque characteristic,
C. Speed variation.
2012/SR6 2012/SR7 2013/SR8 2013/SR09 2013/SR01 2014/SR01 2015/SR02
2015/SR7 2016/SR03 2016/SR8 2016/SR09 2017/SR01 2017/SR02 2017/SR03
2017/SR11 2018/SR01 2018/SR02 2018/SR04 2018/SR06 2020/OCT/Q1 2022/MAR/Q3
2023/JULY/Q1 2023/DEC/Q1

Q2. With reference to an emergency source of electrical power in cargo ships: (16)
A. Describe a typical power source.
B. Give a typical list of essential services, which must be supplied simultaneously;
C. Explain how the emergency installation can be periodically tested.
2009/SR7 2008/SR9 2007/SR4 2011/SR4 2010/SR8 2011/SR1 2011/SR3
2012/SR6 2012/SR09 2013/SR6 2013/SR10 2014/SR03 2014/SR09 2015/SR02
2015/SR04 2015/SR07 2015/SR08 2015/SR10 2016/SR03 2016/SR09 2016/SR10
2017/SR1 2017/SR2 2017/SR03 2017/SR4 2017/SR06 2017/SR11 2018/SR01
2018/SR02 2018/SR04 2018/SR06 2019/FEB 2019/JUN 2019/AUG 2019/SEP
2020/FEB/Q4 2020/OCT/Q5 2023/JULY/Q2 2023/OCT/Q4 2023/DEC/Q2

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2

Q3. The direct online start of squirrel cage motor is used for most electrical drives on A.C. powered
ships. Describe with sketches as necessary one method of overcoming each of the following Problems:
A. High starting current. (8)
B. High starting torque. (8)

Q4. a) (i) Discuss the various hazards and problems which are associated with electric cable Insulation
in the event of fire.
(ii) Suggest remedies for these problems. (8)
b) State how the spread of fire may be reduced by the method used for installing electric cables. (8)
2006/SR3 2012/SR7 2013/SR08 2013/SR09 2014/SR01 2015/SR02 2016/SR03 2017/SR2
2017/SR03 2017/SR07 2017/SR11 2018/SR01 2018/SR02 2018/SR04 2018/SR06 2020/JAN
2020/NOV/Q4 2023/JULY/Q4 2023/DEC/Q4

Q5. a) What are the causes of overheating of an induction motor? (4)


b) What preventive measures are provided against damage to an induction motor in installed condition?
(3)
c) What is the purpose of ‘fuse back up protection’ provided to an induction motor? (3)
d) How does an induction motor develop torque? (3)
e) What is the condition to be satisfied for achieving maximum running torque in an induction motor?
(3)
SECTION – II
Q6. A. What are the characteristics of PN junction diode? Point out its specifications. Also point out the
significance of dynamic and static resistances. (6)
B. Draw the circuit of Half-wave rectifier and its output waveform. A diode whose internal resistance is
20𝛀 is to supply power to 1000 𝛀 load from 110 V (RMS) source. Calculate (i) peak load current, (ii)
DC load current, (iii) AC load current. (10)
2010/SR06 2011/SR12 2012/SR09 2013/SR04 2013/SR10 2014/SR03 2015/SR09
2017/SR03 2017/SR07 2017/SR09 2017/SR11 2017/SR12 2018/SR02 2018/SR03
2020/NOV/Q8 2022/JUL/Q6 2023/JULY/Q6 2023/DEC/Q6

Q7. A. Describe the no-load saturation characteristic of a d.c. generator. (6)


B. A d.c. motor takes an armature current of 110 A at 480 V. The resistance of the armature circuit is
0.2𝛀. The machine has six poles and the armature is lap-connected with 864 conductors. The flux per
pole is 0.05 Wb. Calculate;
(i) The speed;
(ii) The gross torque developed by the armature. (10)
2015/SR06 2015/SR09 2017/SR03 2017/SR09 2017/SR11 2017/SR12 2018/SR02 2018/SR03
2018/SR10 2021/AUG/Q7 2022/JUL/Q7 2023/JULY/Q7 2023/DEC/Q7

Q8. A. What is a commutator? Discuss its rectifying action in detail. (6)


B. Calculate the e.m.f. generated by a 4-pole, wave wound armature having 40 slots with 18 conductors
per slot when driven at 1000 r.p.m. The flux per pole is 0.015 wb. (10)
2012/SR8 2015/SR02 2017/SR01 2017/SR03 2017/SR11 2018/SR02 2018/SR03
2022/JUL/Q8 2023/JULY/Q8 2023/DEC/Q8

Q9. A. Discuss different methods of speed control of a d.c. series motor by adjusting field ampere turns.
(6)
B. A 230 V, d.c. shunt motor runs at 1000 r.p.m and takes 5 amperes. The armature resistance of the
motor is 0.025𝛀 and shunt field resistance is 230 𝛀 Calculate the drop in speed when the motor is
loaded and takes the line current of 41 amperes. Neglect armature reaction. (10)
2022/JULY/Q9 2022/AUG/Q7 2023/JULY/Q9 2023/DEC/Q9

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3

Q10. A. Why is a synchronous motor not self-starting? What are the various ways in which it can be
started? (6)
B. A 500V, single phase synchronous motor gives a net output mechanical power of 7.46kW and
operates at 0.9 power factor lagging. Its effective resistance is 0.8 Ω. If the iron and friction losses are
500 w and excitation losses are 800w, calculate the armature current and the commercial efficiency.
(10)
2015/SR02 2016/SR03 2016/SR08 2017/SR01 2017/SR03 2017/SR11 2018/SR02
2018/SR03 2022/JUL/Q10 2023/JULY/Q10 2023/DEC/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

JUNE 2023
SR.NO.MET-2306

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2023)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on
windows | iOS | mac OS | android OS| Devices such as phones, computers, mobiles, tablets
etc.
please click here to purchase our original books. we have solved all past exam papers of last 15
years. clean content, cad drawing with our 15 years of expertise in maritime publishing.

SECTION – I

Q1. A. State the necessary conditions required prior to the synchronizing of electrical alternators.
B. Describe the type of cumulative damage that may be caused when alternators are incorrectly synchronized.
C. Explain how the damage referred to in (b) can be avoided / reduced.
D. For two alternators operating in parallel state the consequences of:
(i) Reduced torque from the prime mover of one machine.
(ii)Reduced excitation on one machine.
2009/SR6 2008/SR4 2007/SR9 2007/SR8 2007/SR2 2005/SR1 2006/SR8
2006/SR4 2006/SR3 2010/SR4 2010/SR3 2012/SR3 2014/SR4 2014/SR06
2019/DEC 2019/DEC 2023/JUNE/Q1

Q2. In the event of a failure, of the main electrical power supply on a ship, an emergency source of power must
be available, state the circuits which must be fed from such a source and discuss the reasons governing the
selection of such circuits.
2012/SR7 2013/SR09 2014/SR01 2023/JUNE/Q2

Q3. With reference to squirrel cage, induction, electric motors:


A. Describe the construction of such a motor.
B. Sketch the torque against speed curve of such a motor;
C. Describe a method employed by a retrofitted device used to improve the part load

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
performance of an induction motor.
2018/SR12 2021/APR/Q1 2023/JUNE/Q3

Q4. With reference to a 3 speed a.c. cage motor driven cargo winch:
A. Sketch a circuit diagram for a pole change motor;
B. Describe how speed change and braking are achieved.
2009/SR6 2008/SR4 2007/SR8 2006/SR8 2011/SR8 2010/SR2 2010/SR1
2011/SR2 2012/SR11 2014/SR02 2014/SR08 2018/SR08 2018/SR12 2022/OCT/Q4
2023/APR/Q4 2023/JUNE/Q4

Q5. With reference to the condition monitoring of electrical machinery:


A. State TWO important parameters that may be recorded;
B. Explain how the parameters are measured and what defects may be revealed.
2009/SR6 2008/SR4 2007/SR8 2006/SR8 2006/SR2 2011/SR8 2010/SR1
2012/SR7 2012/SR11 2014/SR01 2014/SR02 2014/SR08 2018/SR08 2018/SR09
2018/SR11 2019/JAN 2019/APR 2019/JULY 2020/DEC/Q3 2022/JUL/Q5 2022/OCT/Q5
2023/APR/Q5 2023/JUNE/Q5

SECTION – II

Q6. (a). Explain the significance of the root- mean- square value of an alternating current or voltage waveform;
Define the form factor of such a wave form.
(b). A total load of 8000 kW at 0.8 power factor is supplied by two alternators in parallel. One alternator supplies
6000 kW at 0.9 power factor. Find the kVA rating of the other alternator and the power factor.
2011/SR8 2011/SR4 2011/SR7 2010/SR8 2010/SR2 2010/SR1 2012/SR4
2011/SR1 2012/SR7 2012/SR12 2013/SR08 2013/SR11 2014/SR01 2014/SR03
2015/SR03 2015/SR08 2016/SR4 2016/SR07 2018/SR04 2018/SR07 2018/SR08
2018/SR09 2018/SR11 2018/SR12 2020/JAN 2020/OCT/Q9 2020/DEC/Q6 2021/JAN/Q8
2021/FEB/Q8 2021/MAR/Q10 2021/APR/Q6 2021/SEP/Q6 2021/OCT/Q9 2021/NOV/Q6 2022/FEB/Q8
2022/MAR/Q9 2022/JUN/Q6 2023/APR/Q6 2023/JUNE/Q6

Q7. A. By means of a schematic circuit diagram illustrate the peak rectifier. If the supply voltage is v(t) = Vm Sin
wt, what is the voltage across the load resistor?
B. A battery-charging circuit is shown below in Fig. The forward resistance of the diode can be considered
negligible and the reverse resistance infinite. The internal resistance of the battery is negligible. Calculate the
necessary value of the variable resistance R so that the battery charging current is 1.0 A.

2011/SR7 2010/SR7 2011/SR4 2010/SR11 2011/SR11 2012/SR4 2012/SR7


2012/SR11 2013/SR08 2014/SR01 2014/SR08 2014/SR10 2015/SR03 2015/SR4
2016/SR12 2018/SR04 2018/SR07 2020/JAN 2021/MAR/Q8 2021/JUL/Q8 2021/SEP/Q9
2022/JUN/Q7 2022/OCT/Q7 2023/JAN/Q7 2023/MAR/Q7 2023/JUNE/Q7

Q8. A. Why is it important to maintain high efficiency of operation and low values of voltages regulation for power
transformers?
B. A 100 KVA transformer has 400 turns on the primary and 80 turns on the secondary. The primary and
secondary resistances are 0.3 𝛀 and 0.01 𝛀 respectively, and the corresponding leakage reactance’s are 1.1 𝛀
and 0.035 𝛀 respectively. The supply voltage is 2200 V. Calculate:
(i) The equivalent impedance referred to the primary circuit;

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
(ii) The voltage regulation and secondary terminal voltage for full load having a power factor of (a) 0.8 lagging
and (b) 0.8 leading.
2011/SR7 2010/SR9 2010/SR7 2011/SR4 2010/SR11 2011/SR11 2012/SR7
2012/SR11 2013/SR08 2014/SR01 2014/SR08 2014/SR10 2015/SR03 2016/SR4
2016/SR12 2018/SR04 2019/APR 2019/JULY 2019/OCT 2019/NOV 2020/MAR/Q8
2022/OCT/Q8 2023/JAN/Q8 2023/MAR/Q8 2023/JUNE/Q*

Q9. A. List the factors that determine the starting torque of the three-phase induction motor. How does this
torque generally compare with the value of the rated torque?
B. The low-voltage release of an a.c. motor-starter consists of a solenoid into which an iron plunger is drawn
against a spring. The resistance of the solenoid is 35 ohm. When connected to a 220 V, 50 Hz, a.c. supply the
current taken is at first 2A, and when the plunger is drawn into the “full-in” position the current falls to 0.7 A.
Calculate the inductance of the solenoid for both positions of the plunger, and the maximum value of flux-linkages
in weber-turns for the “full-in” position of the plunger.
2009/SR7 2009/SR6 2008/SR10 2008/SR8 2008/SR4 2008/SR3 2011/SR7
2013/SR11 2011/SR1 2010/SR6 2011/SR4 2012/SR7 2012/SR12 2013/SR08
2013/SR10 2014/SR03 2015/SR03 2015/SR08 2016/SR4 2010/SR8 2014/SR01
2010/SR9 2016/SR06 2016/SR11 2017/SR07 2018/SR04 2018/SR11 2019/APR
2019/JULY 2019/OCT 2019/NOV 2020/NOV/Q9 2023/JAN/Q9 2023/JUNE/Q9

Q10. A. With the aid of delta and star connection diagrams, state the basic equation from which delta – star –
delta conversion equation can be derived.
B. Three batteries A, B and C have their negative terminals connected together, between the positive terminals
of A and B there is a resistor of 0.5 ohm and between B and C three is a resistor of 0.3 ohm,
i. Battery A 105 V, Internal resistance 0.25 ohm’
ii. Battery B 100 V, Internal resistance 0.2 ohm
iii. Battery C 95 V, Internal resistance 0.25 ohm
Determine the current values in the two resistors and the power dissipated by them.
2009/SR6 2008/SR10 2008/SR4 2007/SR7 2011/SR7 2010/SR9 2011/SR1
2010/SR8 2012/SR7 2013/SR11 2014/SR01 2014/SR03 2015/SR03 2015/SR08
2016/SR4 2017/SR7 2018/SR04 2019/APR 2019/JULY 2019/NOV 2020/OCT/Q6
2023/JAN/Q10 2023/JUNE/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 1

SEPTEMBER 2023
SR.NO.MET-2309

EXAMINATION OF MARINE ENGINEER OFFICER


Function: Electrical, Electronic & Control Engineering at Management Level
MARINE ELECTRO – TECHNOLOGY
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
India (2023)

Instructions: -
1. Answer SIX questions, Not more than three from each section (section 1 & 2)
2. All Questions carry equal marks/as shown in brackets( )
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices
that runs on windows | iOS | mac OS | android OS| Devices such as phones,
computers, mobiles, tablets etc.
please click here to purchase our original books. we have solved all past exam
papers of last 15 years. clean content, cad drawing with our 15 years of expertise
in maritime publishing.

SECTION – I

Q1. A. State the necessary conditions required prior to the synchronizing of electrical alternators. (4)
B. Describe the type of cumulative damage that may be caused when alternators are incorrectly
synchronized. (4)
C. Explain how the damage referred to in (b) can be avoided / reduced. (4)
D. For two alternators operating in parallel state the consequences of: (4)
(i) Reduced torque from the prime mover of one machine.
(ii)Reduced excitation on one machine.
2009/SR6 2008/SR4 2007/SR9 2007/SR8 2007/SR2 2005/SR1 2006/SR8
2006/SR4 2006/SR3 2010/SR4 2010/SR3 2012/SR3 2014/SR4 2014/SR06
2019/DEC 2019/DEC 2023/JUNE/Q1 2023/AUG/Q3 2023/SEP/Q1

Q2. In the event of a failure, of the main electrical power supply on a ship, an emergency source of
power must be available, state the circuits which must be fed from such a source and discuss the reasons
governing the selection of such circuits. (16)
2012/SR7 2013/SR09 2014/SR01 2023/JUNE/Q2 2023/SEP/Q2

Q3. With reference to squirrel cage, induction, electric motors:


A. Describe the construction of such a motor. (6)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2
B. Sketch the torque against speed curve of such a motor. (6)
C. Describe a method employed by a retrofitted device used to improve the part load performance of
an induction motor. (4)
2018/SR12 2021/APR/Q1 2023/JUNE/Q3 2023/SEP/Q3

Q4. With reference to a 3 speed a.c. cage motor driven cargo winch:
A. Sketch a circuit diagram for a pole change motor. (8)
B. Describe how speed change and braking are achieved. (8)
2009/SR6 2008/SR4 2007/SR8 2006/SR8 2011/SR8 2010/SR2 2010/SR1
2011/SR2 2012/SR11 2014/SR02 2014/SR08 2018/SR08 2018/SR12 2022/OCT/Q4
2023/APR/Q4 2023/JUNE/Q4 2023/SEP/Q4

Q5. With reference to the condition monitoring of electrical machinery:


A. State TWO important parameters that may be recorded; (8)
B. Explain how the parameters are measured and what defects may be revealed. (8)
2009/SR6 2008/SR4 2007/SR8 2006/SR8 2006/SR2 2011/SR8 2010/SR1
2012/SR7 2012/SR11 2014/SR01 2014/SR02 2014/SR08 2018/SR08 2018/SR09
2018/SR11 2019/JAN 2019/APR 2019/JULY 2020/DEC/Q3 2022/JUL/Q5 2022/OCT/Q5
2023/APR/Q5 2023/JUNE/Q5 2023/SEP/Q5

SECTION – II

Q6. A. A series circuit having resistance, Inductance and capacitance is to be operated on a constant
voltage supply of available frequency. Indicate graphically how changes will take place in the current
and voltage in resistance, inductance and capacitance, and also capacitive reactance and inductive
reactance. (6)
B. A resistance of 130 Ω and a capacitor of 30µF are connected in parallel across a 230 Volt, 50Hz
supply. Find the current in each component, total current, phase angle and the power consumed. (10)
2014/APR/Q6 2023/SEP/Q6

Q7. A. Explain the working principal of a 3 phase induction motor. What are the various types of rotors?
(6)
B. An 18.65Kw, 6-pole, 50Hz, 3 phase slip ring induction motor runs at 960 rpm on full load with a
rotor current per phase of 35A, allowing 1Kw for mechanical losses, find the resistance per phase of 3-
phase rotor winding. (10)
2014/SR4 2014/SR10 2016/SR12 2023/MAR/Q9 2023/SEP/Q7

Q8. A. (i) What is direct-connected alternator? (3)


(ii) How is a direct-connected exciter arranged in an alternator? (3)
B. A twelve-pole, three-phase, delta-connected alternator runs at 600 rev/min and supplies a balanced
star-connected load. Each phase of the load is a coil of resistance 35 ohm and inductive reactance 25
ohm. The line terminal voltage of the alternator is 440V. Determine (a) frequency of supply, (b) current
in each coil, (c) current in each phase of the alternator, (d) total power supplied to the load. (10)
2023/SEP/Q8

Q9. A. Sketch a graph of starting current, and torque against the speed of rotation for a single cage
motor. (6)
B. A 230V motor, which normally develops 10Kw at 1000 rev/min with an efficiency of 85%, is to be
used as a generator. The armature resistance is 0.15Ohm and the shunt field resistance is 220Ohm. If
it is driven at 1080 rev/min and the field current is adjusted to 1.1A by means of the shunt regulator
what output in Kw could be expected as a generator, if the armature copper loss was kept down to that
when running as a motor. (10)

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 3
2014/SR4 2023/SEP/Q9

Q10. A. Compare the effectiveness of a current limiting circuit breaker with that of a HRC fuse. (6)
B. A coil having a resistance of 10 Ohm, and an inductance of 0.15 H is connected in series with a
capacitor across a 100V, 50Hz supply. If the current and the voltage are in phase what will be the value
of the current in the circuit and the voltage drop across the coil? (10)
2014/SR4 2018/SR10 2019/MAR 2019/APR 2019/JUN 2019/JULY 2019/SEP
2019/OCT 2019/NOV 2019/DEC 2020/JAN 2020/OCT/Q10 2021/FEB/Q10 2021/MAR/Q9

2021/APR/Q8 2021/JUL/Q9 2021/SEP/Q10 2022/MAR/Q10 2023/SEP/Q10

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS OF LAST
15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME PUBLISHING

WWW.DIESELSHIP.COM

You might also like