Scribd
Upload
6 views2 pages

Industrial Engineering and Safety (ME 214001) - B.Tech - End Sem VII - 2023

This document outlines the examination details for the B.Tech. 7th semester course on Industrial Engineering and Safety at the Institute of Infrastructure, Technology, Research and Management. It includes instructions for the exam, a breakdown of questions in Section A and Section B, covering topics such as ISO quality systems, preventive maintenance, and job evaluation. The exam is scheduled for December 1, 2023, and consists of a total of 100 marks.

Uploaded by

no name
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views2 pages

Industrial Engineering and Safety (ME 214001) - B.Tech - End Sem VII - 2023

This document outlines the examination details for the B.Tech. 7th semester course on Industrial Engineering and Safety at the Institute of Infrastructure, Technology, Research and Management. It includes instructions for the exam, a breakdown of questions in Section A and Section B, covering topics such as ISO quality systems, preventive maintenance, and job evaluation. The exam is scheduled for December 1, 2023, and consists of a total of 100 marks.

Uploaded by

no name
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Enrolment No:

INSTITUTE OF INFRASTRUCTURE, TECHNOLOGY, RESEARCH AND


MANAGEMENT
Ahmedabad – 380026, Gujarat
(A Govt. of Gujarat Initiative)

B.Tech. Semester :7th - End Semester

Course Code: ME-214001 Course Name: Industrial Engineering and Safety


Date: 01/12/2023 Time:2:30pm-05:30 pm Total Marks: 100 M

Instructions:
1. Do not write anything other than your enrollment number on the question paper.
2. Assume suitable data wherever essential and mention it clearly.
3. Writing appropriate units, nomenclature, and drawing neat sketches/schematics wherever required is an
integral part of the answer.

Section A 60 Marks

1. Explain ISO quality systems.


2. Explain preventive maintenance.
3. State the role of an Industrial Engineer in shop floor.
4. Define the zero defect concept.
5. Differentiate between production management and Industrial engineering.
6. List various Therblings and their use in method study.
7. Product layout is better than process layout. Do you agree with this statement?
Justify.
8. Differentiate between quality assurance and quality control.
9. Why performance appraisal is important for achieving organizational goals?
10. An 8 hours work measurement study in a plant reveals the following: Units produced =320 nos. Idle
time = 15%. Performance rating = 120%. Allowances = 12% of normal time. Determine the standard
time per unit produced.
11. Discuss the three major causes for the fire in industry. Classify the different types of fire.
12. A firm has four work centres, A, B, C & D, in series with individual capacities in units per day shown
in the figure below.

(i) Identify the bottle neck centre. (ii) What is the system capacity? (iii) What is the system efficiency?
Section B 40 Marks

1. State the need and types of Job-evaluation.


2. State the differences between method study and work measurement with their
objectives
3. Discuss the hazards associated and safe handling in thermal power plant.
4. What is plant location? Discuss the need for plant location. What are the steps
involved in selecting a location for automobile industy?

You might also like