STH4DTNS

Stud Type Terminal Block

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug
(Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged
Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the
hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring. STH4DTNS Disconnect
& Test Terminal Block is used for measuring, control and regulatory circuits. They provide a clear functional advantage for devices having utility
instruments and associated transformers.Disconnection is achieved by means of slide link operated with a screwdriver.

TECHNICAL DATA ACCESSORIES

Rated Voltage 1000 V STD.

IMAGES CAT. NO. DESCRIPTION PACK
Rated Current 41 A
CA501-1M Din 32 Rail unslotted 1 meter 50
Tightening Torque 1.2 Nm
CA501-1M-S Din 32 Rail slotted 1 meter 50
Housing Material Polymide CA501-2M Din 32 Rail unslotted 2 meter 50

Product Function Feed Through CA501-2M-S Din 32 Rail slotted 2 meter 50

Wire Entry Orientation Side Entry

CA701-1M Din 35 Rail unslotted 1 meter 50
Mounting Possibility DIN 32/DIN 35/DIN 35-15 Rail
CA701-2M Din 35 Rail unslotted 2 meter 50
Stud Size M4 CA701-2M-S Din 35 Rail slotted 2 meter 50

Operated by Screwdriver CA701-1M-S Din 35 Rail slotted 1 meter 50

Rated Surge Voltage 8 KV

Din 35 Rail 15 deep unslotted 1
CA701-15-1M 50
Pollution Degree 3 meter
CA701-15-1M-S Din 35 Rail 15 deep slotted 1 meter 50
Din 35 Rail 15 deep unslotted 2
CA701-15-2M 50
CONNECTION DATA meter
CA701-15-2M-S Din 35 Rail 15 deep slotted 2 meter 50
Conductor Cross Section Stranded min. 1.5 mm²

Conductor Cross Section Stranded max. 6 mm²

End Clamp in Polyamide 66 suitable
Conductor Cross Section AWG/Kcmil min 22 AWG CA702 50
for Din 32 / Din 35 / Din 35-15 Rails
Conductor Cross Section AWG/Kcmil max 8 AWG

2 Conductors with same Cross Section 1.5 mm²

Stranded min End Clamp in Polyamide suitable
CA802 50
for Din 35 / Din 35-15 Rails
2 Conductor with same Cross Section 6 mm²
Stranded max

Conductor Cross Section Solid min 1.5 mm² End Plate in Grey colour suitable for
EPSTH4DT STH4DT / STH4DTSH Terminal 50
Conductor Cross Section Solid max 6 mm² Block

Insulated Removable Shorting Link

DIMENSIONS CA514/13-2 100
available in 2 Pole
Height with DIN 32 rail 56.4 mm Insulated Removable Shorting Link
CA514/13-3 50
available in 3 Pole
Height with DIN 35 x 15 mm rail 59 mm
Insulated Removable Shorting Link
CA514/13-4 50
Height with DIN 35 x 7.5 mm rail 52.2 mm available in 4 Pole

Length 86 mm
Insulated Ring Type Shorting Link
CA514/14-2 100
Width (Thickness) 11 mm for 2 way Shorting
Insulated Ring Type Shorting Link
CA514/14-3 50
for 3 way Shorting
ORDERING INFORMATION Insulated Ring Type Shorting Link
CA514/14-4 50
for 4 way Shorting
CAT. NO. DESCRIPTION STD. PACK Insulated Ring Type Shorting Link
CA514/14-10 10
for 10 way Shorting
STH4DTNS 6 Sq.mm Hinge Type Disconnect and Test 50
Terminal Block in Grey Colour

1 of 2

CONNECTWELL INDUSTRIES PVT. LTD. | D7, Phase 2, M.I.D.C., Dombivli (E), Maharashtra, India - 421 204.
Tel.: +91 251 7120 600 | Fax: +91 251 7120 700 | Email: [email protected] | Website: www.connectwell.com
STH4DTNS

ACCESSORIES

STD.
IMAGES CAT. NO. DESCRIPTION PACK
Insulated 3 way Alternate Type
CA514/14-3A 10
Shorting Link
Insulated 4 way Alternate Type
CA514/14-4A 10
Shorting Link

Removable Shorting link available in

CA512/13-2 100
2 Pole
Removable Shorting link available in
CA512/13-3 50
3 Pole
Removable Shorting link available in
CA512/13-4 50
4 Pole

Ring Type Shorting Link for 2 way

CA512/14-2 100
Shorting
Ring Type Shorting Link for 3 way
CA512/14-3 50
Shorting
Ring Type Shorting Link for 4 way
CA512/14-4 50
Shorting

Marking Tag Blank suitable for

CTS10U / CGT10U / CGT10N /
CA509/K10 CHV10U / CTS10USC / STH4 / 100
STH4DT / STH4DTSH / CSC10T
Terminal Blocks

Electricians Screwdriver for slotted

SCS1/5.5 10
screws

Lock Out Cap for STH4DT Terminal

LCSTH4DT 50
Block

APPROVALS

RATINGS AS PER STANDARDS

STANDARDS IEC/EN60947-7-1 UL 1059 CSA C.22.2 No:158

Approvals CE UL CSA

Conductor Cross Section Stranded min. 1.5 mm² 22 AWG 22 AWG

Conductor Cross Section Stranded max. 6 mm² 8 AWG 8 AWG

Rated Voltage 1000 V 600 V 600 V

Rated Current 41 A 35 A 35 A

Tightening Torque 1.2 Nm 14 lb-in 14 lb-in

2 of 2

CONNECTWELL INDUSTRIES PVT. LTD. | D7, Phase 2, M.I.D.C., Dombivli (E), Maharashtra, India - 421 204.
Tel.: +91 251 7120 600 | Fax: +91 251 7120 700 | Email: [email protected] | Website: www.connectwell.com