0% found this document useful (0 votes)

12 views89 pages

Main Products - Export Basket - TDS - 240311 - 144445

The document is a technical data sheet for the main products of Persian Gulf Petrochemical Industry Commercial Co. for 2024, detailing various polymers, fuels, feedstocks, chemicals, and fertilizers. It includes specific product information such as producers, applications, properties, and safety considerations. Each product is listed with its respective attributes and typical values, emphasizing their commercial status and intended uses.

Uploaded by

666manager666

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

12 views89 pages

Main Products - Export Basket - TDS - 240311 - 144445

Uploaded by

666manager666

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 89

Technical Data Sheets of Main Products of PGPICC

2024

PERSIAN GULF PETROCHEMICAL INDUSTRY COMMERCIAL CO.

“Table of Contents”

❖ Polymers & Isocyanates

Low-Density Polyethylene (LDPE)
Product: LFI 2119
Producer: Arya Sasol Polymer Company.............................................................................................. 9
Product: LFI 2047A
Producer: Arya Sasol Polymer Company............................................................................................ 13
Product: LF0200
Producer: Bandar Imam Petrochemical Co. ....................................................................................... 17
Product: LH0075
Producer: Bandar Imam Petrochemical Co. ....................................................................................... 19
High-Density Polyethylene (HDPE)
Product: HBM 5510
Producer: Arya Sasol Polymer Company............................................................................................ 21
Product: HFI 5110
Producer: Arya Sasol Polymer Company............................................................................................ 24
Product: HB0035
Producer: Bandar Imam Petrochemical Co. ....................................................................................... 28
Product: HDPE 7000F
Producer: Mehr Petrochemical Co..................................................................................................... 30
Low Molecular Weight Ethylene (LMP)
Product: PE WAX (LMP)
Producer: Mehr Petrochemical Company.......................................................................................... 33
Styrene Butadiene rubber (SBR)
Product: SBR 1502
Producer: Bandar Imam Petrochemical Co. ....................................................................................... 35
Methylene Diphenyl Diisocyanate (MDI)
Product: MDI (KP200)
Producer: Karun Petrochemical Co. ................................................................................................... 37
Toluene Diisocyanate (TDI)
Product: TDI 80/20
Producer: Karun Petrochemical Co. ................................................................................................... 39
Ortho Toluene Diamine (OTD)
Product: OTD
Producer: Karun Petrochemical Co. ................................................................................................... 41
Polymeric Diphenyl Methyl Amin (PMA)
Product: PMA
Producer: Karun Petrochemical Co. ................................................................................................... 43
❖ Fuel & Feedstocks
Propane
Product: PROPANE
Producer: Bandar Imam Petrochemical Co. ....................................................................................... 45
Product: PROPANE
Producer: Persian Gulf Bidboland Gas Treating Co............................................................................ 46
Product: PROPANE
Producer: Pars Petrochemical Co....................................................................................................... 47
Butane
Product: BUTANE
Producer: Bandar Imam Petrochemical Co ........................................................................................ 48
Product: BUTANE
Producer: Persian Gulf Bidboland Gas Treating Co............................................................................ 49
Product: BUTANE
Producer: Pars Petrochemical Co....................................................................................................... 50
Heavy End
Product: NAPHTA HEAVY END
Producer: Bouali Sina Petrochemical Co. ........................................................................................... 51
Product: HEAVY END
Producer: Nouri Petrochemical Co. ................................................................................................... 52
Raffinate
Product: Aromatic Raffinate
Producer: Bandar Imam Petrochemical Co. ....................................................................................... 53
Product: RAFFINATE
Producer: Nouri Petrochemical Co. ................................................................................................... 54
Product: RAFFINATE
Producer: Bouali Sina Petrochemical Co. ........................................................................................... 55
Reformate
Product: AR Reformate
Producer: Bandar Imam Petrochemical Co. ....................................................................................... 56
Product: REFORMATE LOW BZ
Producer: Bouali Sina Petrochemical Co. ........................................................................................... 57
A92
Product: REFORMATE (A92)
Producer: Nouri Petrochemical Co. ................................................................................................... 58
Product: Pentane Plus (C5+)
Producer: Bandar Imam Petrochemical Co. ....................................................................................... 59
C5+
Product: Pentane Plus (C5+) .................................................................................................................. 60
Producer: Persian Gulf Bidboland Gas Treating Co............................................................................ 60
HTN
Product: HTN
Producer: Bouali Sina Petrochemical Co. ........................................................................................... 61
Product: HTN
Producer: Nouri Petrochemical Co. ................................................................................................... 62
DPG
Product: DPG
Producer: Bandar Imam Petrochemical Co. ....................................................................................... 63
❖ Chemicals & Aromatics
Benzene
Product: Benzene
Producer: Bandar Imam Petrochemical Co. ....................................................................................... 64
Product: Benzene
Producer: Nouri Petrochemical Co. ................................................................................................... 65
Product: Benzene
Producer: Bouali Sina Petrochemical Co. ........................................................................................... 66
Para-Xylene
Product: P-XYLENE
Producer: Bouali Sina Petrochemical Co. ........................................................................................... 67
Product: P-XYLENE
Producer: Nouri Petrochemical Co. ....................................................................................................... 68
Ortho-Xylene
Product: ORTHO XYLENE
Producer: Bouali Sina Petrochemical Co. ............................................................................................... 69
Product: ORTHO XYLENE
Producer: Nouri Petrochemical Co. ....................................................................................................... 70
Mixed-Xylenes
Product: Mixed-Xylenes
Producer: Bandar Imam Petrochemical Co. ........................................................................................... 71
Toluene
Product: Toluene
Producer: Bandar Imam Petrochemical Co. ........................................................................................... 72
Heavy Aromatic (C9)
Product: C9 Aromatic
Producer: Bandar Imam Petrochemical Co. ....................................................................................... 73
Product: HEAVY AROMATIC
Producer: Nouri Petrochemical Co. ................................................................................................... 74
Caustic Soda
Product: Caustic Soda
Producer: Arvand Petrochemical Co. ................................................................................................. 75
Aniline
Product: Aniline
Producer: Karun Petrochemical Co. ................................................................................................... 77
EDC
Product: Ethylene Dichloride (EDC)
Producer: Arvand Petrochemical Co. ................................................................................................. 79
MTBE
Product: MTBE
Producer: Bandar Imam Petrochemical Co. ....................................................................................... 81
Melamine
Product: Melamine
Producer: Urmia Petrochemical Co.................................................................................................... 82
❖ Fertilizers
Urea
Product: Urea Granule (Fertilizer Grade)
Producer: Lordegan PetrochemicalCo. .............................................................................................. 84
Ammonia
Product: Ammonia
Producer: Hengam Petrochemical Co. ............................................................................................... 85
Product: Liquid Ammonia
Producer: Lordegan Petrochemical Co. ............................................................................................. 87
Sulfur Nitrogen
Product: Sulfur Nitrogen (N.S.)
Producer: Urmia Petrochemical Co.................................................................................................... 88
Doc Product Data sheet
Page |9
Name: LDPE LFI 2119

Product: LFI 2119

Producer: Arya Sasol Polymer Company
Description:

LFI 2119 is a low-density polyethylene, with excellent optical properties. This grade offers high output and
excellent draw down ability during processing and specially designed for general-purpose thin films.

Status: Commercial: Active

Application: Blown film extrusion, Packaging film and general lamination films

Form(s): Pellet

Attribute:

• Very good optical properties • Good melt strength.

• Good toughness
Additives:
• Antioxidant: No • Slip Agent: No
• AntiBlock: No
Typical Properties:
Typical Properties Typical Value 1 Unit Test Method
Physical
MFI (190 °C /2.16 Kg) 1.9 dg/min ISO 1133
Density 2 921 Kg/m3 ISO 1183 (A)
Mechanical 3
Impact Strength 26 kJ/m ASTM D4272
Tear Strength (TD) 25 kN/m ISO 6383-2
Tear Strength (MD) 60 kN/m ISO 6383-2
Yield Stress (TD) 11 MPa ISO 527-1,3
Yield Stress (MD) 13 MPa ISO 527-1,3

Disclaimer:
This information is based on our current knowledge and experience. In view of many factors that may affect pro-
cessing and application, this data does not relive processors from the responsibility of carrying out their own tests
and experiments, neither does it imply any legally binding assurance of certain properties or of suitability for a specific
purpose. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and
existing laws and legislation are observed. Back to Table of Content
Doc Product Data sheet
P a g e | 10
Name: LDPE LFI 2119

Tensile Stress at Break (TD) 20 MPa ISO 527-1,3

Tensile Stress at Break (MD) 35 MPa ISO 527-1,3
Strain at Break (TD) >500 % ISO 527-1,3
Strain at Break (MD) >150 % ISO 527-1,3
Modulus of Elasticity (TD) 200 MPa ISO 527-1,3
Modulus of Elasticity (MD) 190 MPa ISO 527-1,3
Coefficient of Friction >1 - ASTM D1894
Blocking 20 g ASTM D3354
Re-blocking 100 g SABTEC method
Optical 3
Haze 9 % ASTM D1003 A
Gloss (45°) 55 GU ASTM D2457
Recommended Process Conditions 4
Extruder temperature profile: 165-185°C Blow up ratio: 2-3
film thickness: 20-50 μm
1. Typical values: these are not to be construed as specifications.
2. The density parameter was determined on compression-molded specimens, which were prepared in ac-
cordance with procedure C of ASTM D4703, Annex A1.
3. Properties are based on 25 μm blown film produced at a melt temperature of 170°C and 3 BUR using 100%
LFI2119.
4. Please note that, these processing conditions are recommended by producer only for 100% LFI2119 resin
(not in the case of blending with any other compatible material), but because of the many particular fac-
tors which are outside our knowledge and control, and may affect the use of product, no warranty is given.

Licensor: LFI 2119 has been manufactured under SABTEC licensed technology.

Health and Safety:

Legislation on the control of emissions and pollution prevention should be observed. Workers should be
protected from the possibility of skin or eye contact with molten polymer.
The resin will burn when supplied with excess heat and oxygen. It should be handled and stored away
from contact with direct flames and/or ignition sources. While burning, the resin contributes high heat
and may generate a dense black smoke.
Recycled resins may have previously been used as packaging for, or may have otherwise been in contact
with, hazardous goods. Converters are responsible for taking all necessary precautions to ensure that re-
cycled resins are safe for continued use.
The detailed information about safety, handling, individual protection and waste disposal is provided in
the relevant Safety Data Sheet. Additional specific information can be requested via customer.
Conveying:
Conveying equipment should be designed to prevent accumulation of fines and dust particles. These par-
ticles can, under certain conditions pose an explosion hazard. We recommend that the conveying system
will be equipped with adequate filters and be operated and maintained in the way that ensure no leaks
develop.

Storage:
Polyethylene resins should be protected from direct sunlight and/or heat during storage. The storage lo-
cation should also be dry, dust free and the storage temperature should not exceed 50°C. It is also advis-
able to process polyethylene resins (in pelletized or powder from) within 6 months after delivery, because
excessive aging of polyethylene can lead to a deterioration in quality. Arya Sasol Polymer Company would
not give any warranty to bad storage conditions which may lead to quality deterioration such as color
change, bad smell and inadequate product performance.
The information provided in this Product Data Sheet has been based upon the current level of knowledge
and experience. They are not to be interpreted as a warranty for specific product characteristics. In view
of the many factors that may affect processing and application, these data do not relieve processors of
the responsibility of carrying out their own tests and experiments; neither do they imply any legally bind-
ing assurance of certain properties or of suitability for a specific purpose. Customer is responsible for
determining whether the products and the information in this document are appropriate for customer’s
use and for ensuring that customer’s workplace and disposal practices are in compliance with applicable
laws and other governmental enactments. Seller assumes no obligation or liability for the information in
this document.

Related Documents:
Material Safety Data Sheet

Product: LFI 2047A

Producer: Arya Sasol Polymer Company

Description:

LFI 2047A is a low-density polyethylene, with good toughness and good optical properties. LFI 2047A con-
tains a medium level of antiblock and slip agent (Erucamide) additives. This grade offers low energy con-
sumption and good draw down ability during processing. It typically exhibits low friction and low blocking
properties.

Status: Commercial: Active

Application: Blown film extrusion- High clarity laundry bags- Textile wrapping films- Zip lock bags.

Form(s): Pellet

Attribute:

• Good toughness • Good optical properties

• High-speed converting without sticking
Additives:
• Antioxidant: Yes • AntiBlock: Yes
• Slip Agent: Yes
Typical Properties:
Typical Properties Typical Value 1 Unit Test Method
Physical
MFI (190 °C /2.16 Kg) 4.7 dg/min ISO 1133
Density 2 920 kg/m3 ISO 1183
Mechanical 3
Impact Strength 15 kJ/m ASTM D4272
Tear Strength (TD) 25 kN/m ISO 6383-2

Tear Strength (MD) 80 kN/m ISO 6383-2

Yield Stress (TD) 11 MPa ISO 527-1,3
Yield Stress (MD) 12 MPa ISO 527-1,3
Tensile Stress at Break (TD) 15 MPa ISO 527-1,3
Tensile Stress at Break (MD) 27 MPa ISO 527-1,3
Strain at Break (TD) > 500 % ISO 527-1,3
Strain at Break (MD) > 100 % ISO 527-1,3
Modulus of Elasticity (TD) 200 MPa ISO 527-1,3
Modulus of Elasticity (MD) 200 MPa ISO 527-1,3
Coefficient of Friction 0.2 - ASTM D1894
Blocking 20 g ASTM D3354
Re-blocking 10 g SABTEC method
Optical 3
Haze 9 % ASTM D1003 A
Gloss (45°) 55 % ASTM D2457
Clarity 21 mV SABTEC method
Recommended Process Conditions 4
Extruder temperature profile: 145-160°C Blow up ratio: 2-3
Film thickness: 25-50 μm
1. Typical values: these are not to be construed as specifications
2. The density parameter was determined on compression-molded specimens, which were prepared
in accordance with procedure C of ASTM D4703, Annex A1.
3. Properties are based on 25 μm blown film produced at a melt temperature of 160°C and 3 BUR using
100% LFI 2047A.
4. Please note that, these processing conditions are recommended by producer only for 100% LFI2047A
resin (not in the case of blending with any other compatible material), but because of the many
particular factors which are outside our knowledge and control, and may affect the use of product,
no warranty is given.

Licensor:

LFI 2047A has been manufactured under SABTEC licensed technology.

Health and Safety:

The resin is manufactured to the highest standards, but special requirements apply to certain applications
such as food end-use contact and direct medical use. Specific information on regulatory compliance can
be requested via customer.
Molten polymer may be degraded if it is exposed to air during any of the processing and off-line opera-
tions. The products of degradation may have an unpleasant odor. In higher concentrations they may cause
irritation of the mucus membranes. Fabrication areas should be ventilated to carry away fumes or vapors.
Legislation on the control of emissions and pollution prevention should be observed. Workers should be
protected from the possibility of skin or eye contact with molten polymer.
The resin will burn when supplied with excess heat and oxygen. It should be handled and stored away
from contact with direct flames and/or ignition sources. While burning, the resin contributes high heat
and may generate a dense black smoke.
Recycled resins may have previously been used as packaging for, or may have otherwise been in contact
with, hazardous goods. Converters are responsible for taking all necessary precautions to ensure that re-
cycled resins are safe for continued use.
The detailed information about safety, handling, individual protection and waste disposal is provided in
the relevant Safety Data Sheet. Additional specific information can be requested via customer.

Conveying:
Conveying equipment should be designed to prevent accumulation of fines and dust particles. These par-
ticles can, under certain conditions pose an explosion hazard. We recommend that the conveying system
will be equipped with adequate filters and be operated and maintained in the way that ensure no leaks
develop.

the responsibility of carrying out their own tests and experiments; neither do they imply any legally bind-
ing assurance of certain properties or of suitability for a specific purpose. Customer is responsible for
determining whether the products and the information in this document are appropriate for customer’s
use and for ensuring that customer’s workplace and disposal practices are in compliance with applicable
laws and other governmental enactments. Seller assumes no obligation or liability for the information in
this document.

Related Documents:
Material Safety Data Sheet

Product: LF0200

Producer: Bandar Imam Petrochemical Co.

Description:
LF0200 is a high molecular weight low density polyethylene film grade combining good flexible extrusion
behavior and superior mechanical properties. Film made from LF0200 exhibits high dart impact combined
with excellent yield and tensile strength and high stiffness. Its toughness bears even in cold temperatures.
The film can be sealed on all types of machines. The film possesses good dimensional stability and is re-
sistant to tearing and breaking. LF0200 contains antioxidant.

Application:
• General purpose bags • Coextruded milk bags
• Packaging of mechanical parts Industrial • Low tension power cables insulation and
film industrial injection moldings.
• Carrier bags large bottles
Typical Properties:
Typical Test Units Test Method Spec
MELT INDEX gr/10 min ASTM D-1238 1.8-2.2
DENSITY gr/ml BASEL 0.9190-0.9225
VICAT SOFT.TEMP °C ASTM D-1525 92-96
HAZE (max) % ASTM D-1003 15
GLOSS (min) gu ASTM D-523 60
ELONGATION AT BREAK(MD), min % ASTM D-882 330
ELONGATION AT BREAK(TD), min % ASTM D-882 600
TENSILE AT BREAK (MD), min kg/cm2 ASTM D-882 160
DART IPMACT (min) gr ASTM D-1709 100

Licensor:

TOSOHCORP

Processing Conditions:
LF0200 can be easily processed in all types of extruders. The temperature of the polymer at the die output
should be in the range of 160-180 °C. Minimum blow up ratio should be about 2 in order to keep a good
balance of mechanical properties. To avoid blocking and shrinkage in the reel, the film temperature at the
nip rollers and haul off should be kept as close as possible to the ambient temperature.

Packaging:

25 Kg plastic bag

Storage:
The temperature Storage should be kept as close as possible to the ambient temperature& dry place.

Safety:
LF-0200 is not a hazardous material in most of industrial operations. Please refer to the product Material
Safety Data Sheet (MSDS). Stable under normal temperature conditions and recommended use. The ma-
terial can burn only upon heating to temperatures at above the Decomposition temperature. Combustion
products include carbon monoxide, and carbon Dioxide. Please refer to the product Material Safety Data
Sheet (MSDS)
Related Documents:
Material Safety Data Sheet

Product: LH0075

Producer: Bandar Imam Petrochemical Co.

Description:
LH0075 is a high molecular weight low density polyethylene film grade combining good flexible extrusion
behavior and superior mechanical properties. Film made from LH0075 exhibits high dart impact combined
with excellent yield and tensile strength and high stiffness. It can be processed on automatic machines. It
possesses good dimensional stability. LH0075 is chiefly recommended for extrusion of blown film. It is
suitable for shrink film having a high resistance to whole formation and high degree of shrinkage on cool-
ing. LH0075 contains antioxidant

Application:
• Carrier bags • Large bottles
• Shrink film • Blow molding of small containers
• Industrial film • Packaging of pharmaceutical products
• Dust bin liners
Typical Properties:
Typical Test Units Test Method Spec
MELT INDEX gr/10min ASTM D-1238 0.68-0.85
DENSITY gr/ml BASEL 0.9190-0.9225
VICTA SOFT.TEMP °C ASTM D-1525 93-97
ELONGATION AT BREAK(TD), min % ASTM D-882 450
ELONGATION AT BREAK(MD), min % ASTM D-882 300
TENSILE AT BREAK(MD), min Kg/cm² ASTM D-882 170
H.D. T °C ASTM D-648 30-36
DART IMPACT (min) gr ASTM D-1709 120

Licensor:

TOSOHCORP

Processing Conditions:
LH0075 can be easily processed in all types of extruders. The temperature of the polymer at the die output
should be in the range of 180-210 oC. In order to preserve the excellent mechanical properties, it is advis-
able to limit the predominant orientation of the film along the machine direction by working with a blow-
up ratio of 2. The film temperature at the nip rollers and haul–off should be kept as close as possible to
the ambient temperature

Packaging: 25 Kg plastic bag

Storage:
The temperature Storage should be kept as close as possible to the ambient temperature & dry place.
Safety:
LH-0075 is not a hazardous material in most of industrial operations. Please refer to the product Material
Safety Data Sheet (MSDS)
Stable under normal temperature conditions and recommended use. The material can burn only upon
heating to temperatures at above the Decomposition temperature. Combustion products include carbon
monoxide, and carbon Dioxide. Please refer to the product Material Safety Data Sheet (MSDS)
Related Documents:

Material Safety Data Sheet

Product: HBM 5510

Producer: Arya Sasol Polymer Company

Description:
HBM 5510 is a high-density polyethylene, specially developed for large parts blow molding. This grade,
which is produced by 1-hexene as a co-monomer, offers high stiffness, good process-ability, excellent
parison melt strength and good ESCR.

Status: Commercial: Active

Application: Large Parts Blow Molding, Standard and Lightweight Jerry Cans, Open Top Drums (Up to 110 lit).
Form(s): Pellet

Attribute: Good ESCR, Good Stiffness, Good Process-ability

Additives: Antioxidant: Yes, Processing Aid: No, Antiblock: No, Slip Agent: No
Typical Properties:
Typical Properties Typical Value 1 Unit Test Method
Physical
High Load Melt Flow Index 10 g/10 min ISO 1133
(190oC/ 21.6 kg)
Melt Flow Index 0.50 g/10 min ISO 1133
(190oC/ 5 kg)
Density 2 0.955 g/cm3 ISO 1183
Bulk Density > 0.50 g/cm3 ISO 60
Mechanical 3
Tensile Modulus of Elasticity 1000 MPa ISO 527-1,2
Flexural Modulus - 1% Secant 1000 MPa ASTM D790
Tensile Stress at Yield 27 MPa ISO 527-1,2
Tensile Strain at Yield 8 % ISO 527-1,2

Tensile Stress at Break 43 MPa ISO 527-1,2

Ball Indentation Hardness 49 MPa ISO 2039-1
ESCR F50 110 hrs ASTM D1693
(100% Igepal, Method B)
Impact
Tensile Impact Strength 135 kJ/m2 ISO 8256
(Notched, Type 1, Method A, -30°C)
Izod Impact Strength 22 kJ/m2 ISO 180
(Notched, Method A, 23°C)
Thermal
Vicat Softening Temperature 127 °C ISO 306
(Method A/ 10N)
Deflection Temperature Under 45 °C ISO 75
Load (1.8 MPa)
Recommended Process Conditions 4
Extruder Barrel Temperature: Melt Temperature:
180-220 °C 200-235 °C

1. Typical values: these are not to be construed as specifications.

2. The density parameter was determined on compression-molded specimens, which were prepared in ac-
cordance with procedure C of ASTM D4703, Annex A1.
3. Properties are based on compression-molded specimens, which were prepared in accordance with proce-
dure B of ASTM D4703, Annex A1, using 100% HBM 5510 resin.
4. Please note that, these processing conditions are recommended by manufacturer only for 100% HBM 5510
resin (not in the case of blending with any other compatible material), therefore because of the many par-
ticular factors which are outside our current knowledge and control and may affect the use of product, no
warranty is given for the foregoing data. Moreover, the specific recommendations for resin type and pro-
cessing conditions can only be made when the end use, required properties and fabrication equipment are
known.

Licensor:
HBM 5510 has been manufactured under Basell license.
Health and Safety:

The resin is manufactured to the highest standards, but special requirements apply to certain applications
such as food end-use contact and direct medical use. Specific information on regulatory compliance can
be requested via customer.
Molten polymer may be degraded if it is exposed to air during any of the processing and off-line opera-
tions. The products of degradation may have an unpleasant odor. In higher concentrations they may cause
irritation of the mucus membranes. Fabrication areas should be ventilated to carry away fumes or vapors.
Legislation on the control of emissions and pollution prevention should be observed. Workers should be
protected from the possibility of skin or eye contact with molten polymer.
The resin will burn when supplied with excess heat and oxygen. It should be handled and stored away
from contact with direct flames and/or ignition sources. While burning, the resin contributes high heat
and may generate a dense black smoke. Recycled resins may have previously been used as packaging for,
or may have otherwise been in contact with, hazardous goods. Converters are responsible for taking all
necessary precautions to ensure that recycled resins are safe for continued use.
The detailed information about safety, handling, individual protection and waste disposal is provided in
the relevant Safety Data Sheet. Additional specific information can be requested via customer.

Related Documents:
Material Safety Data Sheet

Product: HFI 5110

Producer: Arya Sasol Polymer Company

Description:
HFI 5110 is a high molecular weight, high-density polyethylene with broad molecular weight distribution
and 1-hexene as a co-monomer, specially developed for producing thin films with excellent strength and
rigidity. This product is suitable for manufacturing of high strength grocery sacks, shopping bags and high-
quality thin films for uni/multi-wall packaging. Films produced with this grade can be readily treated and
printed to give high quality graphics.

Status: Commercial: Active

Application: Blown film extrusion, Uni/multi wall packaging, High quality thin films, Shopping bags, High strength gro-
cery sacks.
Form(s): Pellet

Attribute:
• High tear resistance • High quality graphic printing
• High melt stability

Additives:
• Antioxidant: Yes • Antiblock: No
• Zink Stearate: Yes • Slip Agent: No
Typical Properties:
Typical Properties Typical Value 1 Unit Test Method
Physical
High Load Melt Flow Index (190oC/ 21.6 10 g/10 min ISO 1133
kg)
Density 2 0.951 g/cm3 ISO 1183
Mechanical 3
Tensile Modulus of Elasticity 1050 MPa ISO 527-1,2

Tensile Strength (MD) 55 MPa ISO 527-1,3

Tensile Strength (TD) 55 MPa ISO 527-1,3
Tensile Strain at Break (MD) 580 % ISO 527-1,3
Tensile Strain at Break (TD) 620 % ISO 527-1,3
Tensile Stress at Yield 26 MPa ISO 527-1,3
Tensile Strain at Yield 10 % ISO 527-1,3
Elmendorf Tear Strength (MD) 250 mN ISO 6383-2
Elmendorf Tear Strength (TD) 800 mN ISO 6383-2
Thermal
Melting Temperature 132 °C ISO 3146
Vicat Softening Temperature (Method 127 °C ISO 306
A/10N)
Recommended Process Conditions 4
Extruder temperature profile: 200-235 °C Blow up ratio: 3-5
Film thickness: 15-50 μm
1. Typical values: these are not to be construed as specifications.
2. The density parameter was determined on compression-molded specimens, which were prepared in
accordance with procedure C of ASTM D4703, Annex A1.
3. Properties are based on 20 μm blown film produced at a melt temperature of 220°C and 3 BUR using
100% HFI5110 resin. Modulus property is based on compression-molded specimens, which were pre-
pared in accordance with procedure B of ASTM D4703, Annex A1.
4. Please note that, these processing conditions are recommended by manufacturer only for 100%
HFI5110 resin (not in the case of blending with any other compatible material), therefore because of
the many particular factors which are outside our current knowledge and control and may affect the
use of product, no warranty is given for the foregoing data. Moreover, the specific recommendations
for resin type and processing conditions can only be made when the end use, required properties and
fabrication equipment are known.

Licensor:
HFI 5110 has been manufactured under Basell license.
Health and Safety:
The resin is manufactured to the highest standards, but special requirements apply to certain applications
such as food end-use contact and direct medical use. Specific information on regulatory compliance can

be requested via customer. Molten polymer may be degraded if it is exposed to air during any of the
processing and off-line operations. The products of degradation may have an unpleasant odor. In higher
concentrations they may cause irritation of the mucus membranes. Fabrication areas should be ventilated
to carry away fumes or vapors. Legislation on the control of emissions and pollution prevention should be
observed. Workers should be protected from the possibility of skin or eye contact with molten polymer.
The resin will burn when supplied with excess heat and oxygen. It should be handled and stored away
from contact with direct flames and/or ignition sources. While burning, the resin contributes high heat
and may generate a dense black smoke. Recycled resins may have previously been used as packaging for,
or may have otherwise been in contact with, hazardous goods. Converters are responsible for taking all
necessary precautions to ensure that recycled resins are safe for continued use. The detailed information
about safety, handling, individual protection and waste disposal is provided in the relevant Safety Data
Sheet. Additional specific information can be requested via customer.

Storage:
Polyethylene resins should be protected from direct sunlight and/or heat during storage. The storage lo-
cation should also be dry, dust free and the storage temperature should not exceed 50 °C. It is also advis-
able to process polyethylene resins (in pelletized or powder from) within 6 months after delivery, because
excessive aging of polyethylene can lead to a deterioration in quality. Arya Sasol Polymer Company would
not give any warranty to bad storage conditions which may lead to quality deterioration such as color
change, bad smell and inadequate product performance. The information provided in this Product Data
Sheet has been based upon the current level of knowledge and experience. They are not to be interpreted
as a warranty for specific product characteristics. In view of the many factors that may affect processing
and application, these data do not relieve processors of the responsibility of carrying out their own tests
and experiments; neither do they imply any legally binding assurance of certain properties or of suitability
for a specific purpose. Customer is responsible for determining whether the products and the information
in this document are appropriate for customer’s use and for ensuring that customer’s workplace and

disposal practices are in compliance with applicable laws and other governmental enactments. Seller as-
sumes no obligation or liability for the information in this document.

Related Documents:
Material Safety Data Sheet

Product: HB0035

Producer: Bandar Imam Petrochemical Co.

Description:
HB-0035 is a high molecular weight high density polyethylene blow molding grade combining blow mold-
ing extrusion behavior and superior mechanical properties. Blow molded items made from HB-0035 ex-
hibit high impact strength and good stress cracking resistance and high stiffness HB-0035 contains anti-
oxidant to protect the polymer from degradation during process.

Application:
• Small-sized bottle (maximum 20 liter) • Chemical containers
• Thin wall drinking water bottles • Lubrication bottles (5 liter)
• Kerosene containers
Typical Properties:
Typical Test Units Test Method Spec
MELT FLOW INDEX (190°C/2.16kg) gr/10 min ASTM D-1238 0.28-0.43
DENSITY gr/cm3 ASTM D-1505 0.956-0.962
IZOD IMPACT STRENTH kg.cm/cm ASTM D-256 MIN 25
YELLOW INDEX ─ ASTM D-1925 MAX 5
ASH CONTENT % Wt ASTM D-1063 MAX 0.06
VOLATILE MATTER % Wt ASTM D-1960 MAX 0.05
TENSILE STRENGHT@BREAK kg.cm2 ASTM D-638 MIN 290
ELONGATION % ASTM D-638 MIN 900
TENSILE STRENGHT@YIELD kg.cm2 ASTM D-638 MIN 250
◦
MELTING POINT C ASTM D-2117 130-131
Licensor:

Mitsui chemicals.

Packaging:

The product is supplied in palletized 25 kg bags

Processing Conditions:
HB0035 is a HDPE resin produced via slurry process technology is suitable for Blow molding and have
excellent rigidity, Fluidity, Good resistance at chemical. Recommend melt temperature 190 – 230 C ̊ de-
pending on the type equipment.

Storage:
HB-0035 should be stored in dry and away from sources of heat and light. Please consult the safety data
sheet for more information.
Safety:
Molten polymers could be injured skin or eye so safety glasses and appropriate gloves are suggested to
prevent possible thermal injuries. Also, appropriate ventilation is suggested in working by melt polymer.
Accumulation of fines or dust particles that are in this grade is not suitable because of explosion hazard
probability. So adequate filters and grounding exists at all time are recommended.

Related Documents:
Material Safety Data Sheet

Product: HDPE 7000F

Producer: Mehr Petrochemical Co.

Description:
7000F is a high-density polyethylene resin; a product of bi-modal process from Mitsui Chemicals, Inc. of
Japan.

Application:
• Recommend film thickness at 10-25 mi- • Shopping bag and T-shirt bag
crons • Garbage bag
• High tensile strength with good dart im- • Liner bag
pact strength • Enhanced ultra-thin film
• Low gel content • High stiffness
• Good moisture barrier • Wide service temperature range, UV re-
• Food contact applicable sistance
• Good impact resistance and processabil-
ity
Typical Properties:
Typical Test Test Method Spec Unit
Resin Properties
Melt Flow Rate ASTM D 1238 @ 190 °C, 2.16 kg 0.04 g/10 min
Density ASTM D 1505 0.954 g/cm³
Melting Point ASTM D 2117 131 °C
Vicat Softening Point ASTM D 1525 124 °C
Brittleness Temperature ASTM D 746 ˂ -60 °C
ESCR ASTM D 1693 @ 50 °C ˃ 1000 hrs, F50
(Condition: Compression Molded, 25% Igepal)
Film Properties
Tensile Strength at Yield ASTM D 638 @ crosshead MD: 380*, TD: Kg/cm²
speed 50 mm/min 250*

Tensile Strength at Break ASTM D 638 @ crosshead MD: 620*, TD: Kg/cm²
speed 50 mm/min 310*
Tensile Modulus, 2% Se- ASTM D 638 @ crosshead MD:8200*, TD: Kg/cm²
cant speed 50 mm/min 8000*
Elongation at Break ASTM D 638 @ crosshead MD: 240*, %
speed 50 mm/min TD: 450*
Elmendorf Tear Strength ASTM D 1922 MD: 3*, TD: g
80*
Dart Impact Strength ASTM D 1709 139* g
Gloss ASTM D 2457 5.8 GU
Haze ASTM D 1003 85.5 %
(*) Properties obtained from film produced on a pilot line, 10-micron, BUR 5:1, MD= Machine Direction, TD= Trans-
verse Direction Note: Conversion factor for changing unit from Kg/cm² to MPa is divided by 10.2

Processing Conditions:
The actual extrusion condition depends on type of using machine, size and film thickness of product re-
quired.
Generally, melt temperature should be 190 – 210 °C with BUR= 3-5 times and frost line height (FLH)= 8-
10 times of die diameter.
Product Available Form and Packaging:
• Pellet
• 25 kg loose bag
• Big bag with specified weight

Storage:
Store in original container in tidy according to the Manual Handling and storage from Mehr petrochemical
Company.
Product(s) should be stored in dry and dust free location at temperature below 50 °C and protected from
direct sunlight and/or heat, well-ventilated area, away from incompatible materials and food and drink,
as this may lead to quality deterioration, which results in odour generation and color changes and can
have negative effects on the physical properties of this product. Keep container tightly closed and sealed
until ready for use. Containers that have been opened must be carefully released and kept upright to

prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environ-
mental contamination. The storage area should be stable and not be slopped.

Safety:
The product is not classified as a hazardous material.
Please see Material Safety Data Sheet for details on various aspects of safety, recovery and disposal of the
product(s).
Recycling:
The product is suitable for recycling using modern methods of shredding and cleaning. In- house produc-
tion waste should be kept clean to facilitate direct recycling.
Please see Material Safety Data Sheet for details on various aspects of safety, recovery and disposal of the
product(s).
Related Documents:
Material Safety Data Sheet
Statement on compliance to food contact regulations

Product: PE WAX (LMP)

Producer: Mehr Petrochemical Company

Description:
LP is the mixture of low molecular weight Polyethylene, Hexane, Oligomer and water as by product of
Polyethylene CX process.

Application:
Asphalt modification, Hot melt road marking, PVC additives, Spray Coating, candles, Color concentrate,
Corrugated board coating, Emulsifier

Typical Properties:
Typical Test Test Method Spec Unit
Physical Properties
Viscosity ISO 3219 @ 149°C 4 - 300 CP
Density ISO 1183-2 0.90 – 0.94 g/cm³
Melting Point ASTM D 2117 80 - 115 °C
Whiteness index ASTM E313 ≥45 -
Product Available Form and Packaging:
• White Flake or White Flake/Powder
• Big bag with specified weight

Keep container tightly closed and sealed until ready for use. Containers that have been opened must be
carefully released and kept upright to prevent leakage. Do not store in unlabelled containers. Use appro-
priate containment to avoid environmental contamination. The storage area should be stable and not be
slopped.
Safety:
The product is not classified as a hazardous material.
Please see Material Safety Data Sheet for details on various aspects of safety, recovery and disposal of the
product(s).
Recycling:
The product is suitable for recycling using modern methods of shredding and cleaning. In- house produc-
tion waste should be kept clean to facilitate direct recycling.
Please see Material Safety Data Sheet for details on various aspects of safety, recovery and disposal of the
product(s).
Related Documents:
Material Safety Data Sheet

Product: SBR 1502

Producer: Bandar Imam Petrochemical Co.

Description:
SR Production-SBR 1502 is most typical grade of non-staining, non-oil extended SBR and is emulsion sty-
rene-butadiene rubber produced by cold polymerization using a mixture of rosin potassium soap and fatty
sodium soaps as emulsifiers and a non-staining stabilizer and a salt–acid coagulation. Sr Production-SBR
1502 exhibits excellent tensile strength, abrasion resistance, good mechanical properties, and good re-
sistance to polar solvents, dilute acids and bases.

Application:
include white sidewall tires, foot wear, light and dark colored mechanical goods and miscellaneous items
where excellent physical properties and minimum discoloration and staining are required.

Typical Properties:
Composition Units Test Method Spec
VOLATILE METTER wt % ASTM D-5668 0.75 max
ASH wt % ASTM D-5667 1.5 max
ORGANIC ACID wt % ASTM D-5774 4.75-7.00
SOAP wt % ASTM D-5774 0.50 max
BOUND STYRENE wt % ASTM D-5775 22.5-24.5
RAW VISCOSITY (ML1+4@ 100 ◦C) ─ ASTM D-1646 46.0-58.0
COMPOUND VISCOSITY (ML1+4@ 100 ◦C) ─ ASTM D-1646 84 max
TENSILE STRENGHT (35 MINUTES CURE) kg/cm2 ASTM D-638 250 min
ULTIMATE ELONGATION (35 MINUTES CURE) % ASTM D-638 350 min
300% MODULUS (35 MINUTES CURE) kg/cm2 ASTM D-638 167-207

Licensor: JSR (Japanese synthetic rubber)

Processing Conditions:
Compounding formula :(ASTM D–3182 & D–3185):

SBR-1502: 300 (gr)

Carbon black IRB = 6. Conforming to NBS – SRM No. 378: 150 (gr)
Zinc oxide: NBS – SRM No. 370: 9.0 (gr)
Stearic acid: NBS – SRM No. 372: 3.0 (gr)
Sulfur: NBS – SRM No. 371: 5.25 (gr)
Accelerator (TBBS): NBS – SRM No.384: 3.0 (gr)
Temperature: 150 5 oC
Cure time: 35 min
Please note that, these processing conditions are recommended by producer only for 100% SR Produc-
tion-SBR 1502 (not in the case of blending with any other compatible material), but because of the many
particular factors which are outside our knowledge and control, and may affect the use of product, no
warranty is given.

Packaging:
SR Production-SBR 1502 is in 35±0.5 kg bale internal polyethylene coated plastic and every 36-bale packed
in wooden box

Storage:
SR Production-SBR 1502 should be stored in its original packaging in a cool, dry place at temperatures
below 40°C. Exposure to light must be avoided and also other heat sources. Minimize sources of ignition,
such as static build up, heat, spark or flame. Product specification guaranty for 6(six) months from product
date at recommended storage condition.

Safety:
Provided good ventilation and local exhaust systems are used. Avoid prolonged or repeated contact with
skin. Use good personal hygiene. Do not consume or store food in the work area. Wash hands before
smoking or eating. Take precautionary measures against static discharges. Electrically bond and ground
all containers and equipment before transfer or use of material.

Related Documents:
Material Safety Data Sheet

Product: MDI (KP200)

Producer: Karun Petrochemical Co.

Description:
Methylene diphenyl diisocyanate, most often abbreviated as MDI, is an aromatic diisocyanate. Three iso-
mers are common, varying by the positions of the isocyanate groups around the rings: 2,2'-MDI, 2,4'-MDI,
and 4,4' MDI. The 4,4' isomer is most widely used, and is also known as 4,4'-diphenylmethane diisocya-
nate.

Typical Application:
• Rigid foams- used to produce sandwich panels and polyurethane wood.
• Flexible foams – used for the fabrication of prepolymers for bedding, furniture, automotive
seating, flexible packaging and carpet underlay; this is the largest market application for Pol-
ymeric MDI
• “Foamed-in-place” polyurethane plastics – ranging from soft and sponge-like to hard and po-
rous for use in furniture, packaging, insulation and boat building
• Polyurethane coatings – used on leather, wire, tank linings and masonry
• Rigid, “pour-in-place” foams – for use in appliances, and, in smaller amounts, packaging
• Cast elastomers – for production of articles such as roller blade wheels

Typical Properties:
Property UNIT SPECIFICATION TEST METHOD
Appearance ------ Dark Brown liquid Visual
NCO WT% 30.0-32.0 ASTM D5155-14 Method A
Hydrolysable Chloride WT% Max. 0.2 ASTM D4663-15
Acidity as HCL WT% Max. 0.05 ASTM 6099-13(High acidity)
ASTM 5629-11(Low acidity)
Viscosity at 25(°C) mPa.s 150-250 ASTM D4889-15
Specific Gravity at 25(°C) °C 1.22-1.25 ASTM D4659-14
Isocyanate Equivalent Weight gr/eq 131-140 ASTM D5155-14 Method A
***The current manufacturing technology of most isocyanates is based on the phosgenation of primary amines.

Licensor:
Chematur Engineering (CEAB), Sweden.
Packing details:
In 220 lit (250 kg Net.) new steel drum, each 4 drums strapped on a wooden pallet.
Handling and storage conditions:
Use only with adequate ventilation. Do not eat, drink, or smoke in working area. Never use welding/cut-
ting torch near storage containers, even if empty, because even residual product can ignite explosively.
Product must be stored at 20°C to 40°C.
Storage stability: The best time is 6 month and it can be extended to 12 months.
Related Documents:
Material Safety Data Sheet

Product: TDI 80/20

Producer: Karun Petrochemical Co.

Description:
Toluene Diisocyanate (TDI) is an organic compound with the formula CH3C6H3(NCO)2
Typical Application:
• Flexible foams – used for the fabrication of bedding, furniture, automotive seating, flexible
packaging and carpet underlay; this is the largest market application for TDI
• Foamed-in-place” polyurethane plastics – ranging from soft and sponge-like to hard and po-
rous for use in furniture, packaging, insulation and boat building
• Polyurethane coatings – used on leather, wire, tank linings and masonry
• Elastomers – used to produce adhesives, films and linings, and abrasive wheels and other
mechanical items that require abrasion and solvent resistance
• Rigid, “pour-in-place” foams – for use in appliances, and, in smaller amounts, packaging
• Urethane sealants – used in construction applications
• Cast elastomers – for production of articles such as roller blade wheels

Typical Properties:
Property SPECIFICATION TEST METHOD
Appearance @ 30 ˚C Clear liquid Visual
Purity, %wt. Min. 99.5 GC
2,4-TDI Content, %wt. 80.0 ± 1.0 ASTM D4660.00
2,6-TDI Content, %wt. 20.0 ± 1.0 ASTM D4660.00
Total Acidity, ppm by wt. Max. 40 ASTM D5629.05
Hydrolysable chlorine, ppm by wt. Max. 120 ASTM D4663.98
Total chlorine, ppm by wt. Max. 500 ASTM D4661.03
Color (APHA) Max.25 ASTM D4877.04
Sp.gr @ 25 ˚C 1.22 ± 0.02 ASTM D4659.03
Nitro Isocyanate compounds, ppm Max.30 H900.5800
***The current manufacturing technology of Aniline is based on the Hydrogenation of Nitrobenzene.

Licensor:
Chematur Engineering (CEAB), Sweden.
Packing details:
In 220 lit (250 kg Net.) new steel drum, each 4 drums strapped on a wooden pallet.
Handling and storage conditions:
Use special care when handling/transporting samples. Store at 20-30°C. Material sampling procedures
should avoid vapor inhalation and skin/eye contact and only be conducted with proper protective equip-
ment. Handle empty containers with care - residue may be combustible. When cleaning or repairing
equipment contaminated with this material, total encapsulating impervious protective suits, gloves, and
boots should be worn to prevent any contact. Decontaminate empty, non-returnable isocyanate drums
by filling with water. Allow to stand 48 hours with bung removed. After 48 hours, drain and pierce drums.
Wash with sodium carbonate solution (5-10%).
Store in tightly closed/properly vented containers with vents directed to locations removed from potential
personnel exposure. Store in well-ventilated area away from water, moisture, humidity, and direct sun-
light. Store at 20-30°C. Do not store in galvanized or other corrodible containers. Storage and handling in
stainless steel is preferred. Storage in polyethylene containers is hazardous because of absorption of wa-
ter through the plastic.
Related Documents:
Material Safety Data Sheet

Product: OTD

Producer: Karun Petrochemical Co.

Description:
Ortho toluene-diamine (OTD) is an organic compound with a close formula C6H3CH3(NH2)2. It is a light
gray solid mainly consisted of 2,3-Diamino-Toluene and 3,4-Diamino- Toluene isomers. The compound is
very unstable and tends to darken on storage & exposure to air at room temperature, due to oxidizing
reaction. When heated to decomposition, it emits toxic fumes of nitrogen oxides. In KARUN Petrochemical
Company, OTD is produced as a byproduct through some consecutive reactions starting with nitrating
toluene to produce a dinitrotoluene isomer- mixture, followed by catalytic reduction to a mixture of the
corresponding diamines, in presence of Palladium-Platinum (Pd-Pt) Catalyst and terminating to a purifica-
tion process to separate it from the other companion isomers.

Typical Application:
• OTD is used as a chemical intermediate in the production of tolyltriazole that is a corrosion
inhibitor.
• Another application is as a precursor to polyether polyols.
• It also is used in hair and makeup colors production, dye and pharmaceutical industries.

Typical Properties:
Property UNIT SPECIFICATION TEST METHOD
Appearance ------ Light grey to dark solid Visual
Purity WT% Min. 98.0 21.70.23A
Other isomers WT% Max. 2.0 21.70.23A
Melting point °C 60.0-70.0 H900-3000
Licensor:
Chematur Engineering (CEAB), Sweden.

Packing details:

220-liter (about 200 kg) steel barrels are used for the packaging of the OTD product.
Handling and storage conditions:

Careful consideration should be given to handling this product. Use only with adequate ventilation. Toxic
by inhalation, skin absorption, and ingestion. Irritating to eyes and skin. Do not eat, drink, or smoke in
working area. OTD is readily absorbed through the skin, so skin and eye contact should be prevented. The
handlers must wear special equipment which prohibits contact with skin or eyes. It is recommended to
shower at the end of work shift.
Store OTD in a cool, dry, well-ventilated area away from heat generation sources, strong oxidizing agents
and strong acids. Store solidified OTD in tightly closed containers.
Related Documents:
Material Safety Data Sheet

Product: PMA

Producer: Karun Petrochemical Co.

Description:
PMA is a mixture of 4,4'-Diaminodiphenyl Methane (MDA), 2,4'-MDA, 2,2'-MDA and other aromatic
amine. PMA product is yellowish-brown at room temperature and soluble in most organic solvents and
hydrochloric acid, but insoluble in gasoline, hexane or water.

Typical Application:
• Used as cross-linker in epoxy resin industry besides being used in MDI producing.
• It is suitable for encapsulating or casting large part because the curing time is adjustable.
• The products synthesized with it have excellent properties of mechanics with high crosslink
density.

Typical Properties:
Property Unit Spec Test Method
Appearance ------ Yellow to brown solid Visual
Purity WT% Min. 99.7 2-2.9.3-I033
Total MDA WT% 65.0-85.0 2-2.9.3-I033
Aniline WT% max. 0.1 2-2.9.3-I033
Water WT% max. 0.1 2-2.9.3-I035
Licensor:
Chematur Engineering (CEAB), Sweden.
Packing details:
In 220 lit (200 kg Net.) new steel drum, each 4 drums strapped on a wooden pallet.
Handling and storage conditions:

PMA should be kept in dry, clean warehouse with well ventilation. Avoid exposing to light and heating for
prevention from oxidation. Protect the product from leakage, rain and insulation during transportation.

Product must be stored at 20°C to 40°C. The best time is 6 month and it can be extended to 12 months.
Related Documents:

Material Safety Data Sheet

Product: PROPANE

Producer: Bandar Imam Petrochemical Co.

Typical Properties:
Typical Test Unit Method Specification
Ethane MOL % ASTM D-2163 0.4 Max.
Propane MOL % ASTM D-2163 98 Min.
Butane MOL % ASTM D-2163 1.4 Max.
Pentanes & Heavier MOL % ASTM D-2163 0.01 Max.
Copper Corrosion - ASTM D-1838 NO. l a
Hydrogen Sulfide VOL PPM ASTM D-2420/DRAGER 5 Max.
Sp.Gr @ (60/60°F) - ASTM D- 2598 To Be Reported
Total Sulfur WT PPM UV- F 30 Max.
(Based on ASTM D-6667)
Vapour-Pressure @ (100°F) Psig ASTM D- 2598 200 Max.
Water Content - ASTM D-2713 Pass
Related Documents:
Material Safety Data Sheet

Product: PROPANE

Producer: Persian Gulf Bidboland Gas Treating Co.

Typical Properties:
Composition Unit Method Specification
Propane Mole% ASTM D-2163-66 98 (Min)
Ethane Mole% ASTM D-2163-66 0.4 (Max)
Butane Mole% ASTM D-2163-66 1.4 (Max)
Pentane Plus Mole% ASTM D-2163-66 0.01(Max)
H2S PPM v UOP 212 5(Max)
Vapor Pressure @ 37.8°C Barg ASTM D-1267-67 0.9887
Temperature @ 95% Evaporation °C ASTM D-1837-64 -38.3
Copper Corrosion - ASTM D-1838-64 Max. No. 1
Total organic Sulphur PPM wt. ASTM D-3246 30
Water Content - - Pass NGPA Propane Dryness

Material Safety Data Sheet

Product: PROPANE

Producer: Pars Petrochemical Co.

Description:
Propane has been manufactured using LINDE technology.

Application:
Propane is shipped as a product of PPC. It is used as a fuel for many residential, commercial and agricul-
tural heat applications, including cooking, hot water system and heating. Propane is also employed as a
propellant, refrigerant, vehicle fuel and petrochemical feed stock.

Typical Properties:
Typical Test Unit Method Specification
C2H6 and lighter wt.% ASTM D2163 1.0 Max
C3H8 wt.% ASTM D2163 98.0 Min
C4H10 and Heavier wt.% ASTM D2163 1.0 Max
Sp. Gr. @ (60 o F) --- ASTM D2598 To Be Reported
Copper Corrosion --- ASTM D1838 1 Max
Total Sulfur ppm (wt.) ASTM D6667 30 Max
Hydrogen Sulfide ppm (wt.) ASTM D2420 Pass
Vapor Press@ (100 o F) psig ASTM D2598 200 Max

Material Safety Data Sheet

Product: BUTANE

Producer: Bandar Imam Petrochemical Co

Typical Properties:
Typical Test Unit Method Specification
Ethane MOL % ASTM D -2163 0.08 Max.
Propane MOL % ASTM D -2163 2 Max.
Total - C4 MOL % ASTM D -2163 97.5 Min.
Total - C5 MOL % ASTM D -2163 0.82 Max.
Total Olefin MOL % ASTM D -2163 0.1 Max
Copper Corrosion -- ASTM D -1838 NO. l a
Hydrogen Sulfide VOL PPM ASTM D-2420/DRAGER Nil
Sp.Gr @ (60/60°F) -- ASTM D - 2598 To Be Reported
Total Sulfur WT PPM UV-F 30 Max.
(Based On ASTM D -6667)
Vapour-Pressure @ (100° F) psi ASTM D - 2598 70 Max.
Water Content VOL PPM ASTM D-7995 10 Max.
(Based On karl fischer)
Residue on Evaporation VOL% ASTM D - 2158 0.05 Max.
Related Documents:
Material Safety Data Sheet

Product: BUTANE

Producer: Persian Gulf Bidboland Gas Treating Co.

Typical Properties:
Composition Unit Method Specification
Butane Mole% ASTM D-2163-66 97.5 (Min)
Ethane Mole% ASTM D-2163-66 0.08 (Max)
Propane Mole% ASTM D-2163-66 2 (Max)
Pentane Plus Mole% ASTM D-2163-66 0.82 (Max)
H2S PPM v. UOP 212 Nill
Vapor Pressure @ 37.8°C Barg ASTM D-1267-67 4.8
Temperature @ 95% Evaporation °C ASTM D-1837-64 2.22
Copper Corrosion - ASTM D-1838-64 Max. No. 1
Total organic Sulphur PPM wt. ASTM D-3246 2
Water Content PPM v. - 10 (Max)
Related Documents:

Material Safety Data Sheet

Product: BUTANE

Producer: Pars Petrochemical Co.

Description:
Butane has been manufactured using LINDE technology.

Application:
Butane is shipped as a product of PPC. It is useful for many applications. Bottled butane gas is a fuel for
cooking and camping. It is also used as a feedstock component for the production of base petrochemicals
in steam cracking and a component of gasoline (petrol).

Typical Properties:
Typical Test Unit Test Method Specification
C3H8 and lighter wt.% ASTM D2163 1.0 Max.
C4H10 wt.% ASTM D2163 98.0 Min.
C5H12 and Heavier wt.% ASTM D2163 1.0 Max.
Sp. Gr. @ (60 o F) --- ASTM D2598 To Be Reported
Copper Corrosion --- ASTM D1838 1 Max.
Total Sulfur ppm (wt.) ASTM D6667 30 Max.
Hydrogen Sulfide ppm (wt.) ASTM D2420 Pass
Vapor Press@ (100 o F) psig ASTM D2598 70 Max.
Related Documents:

Material Safety Data Sheet

Product: NAPHTA HEAVY END

Producer: Bouali Sina Petrochemical Co.

Typical Properties:
TYPICAL TEST UNIT TEST METHOD SPECIFICATION
IBP 165 - 184
10% 177 - 191
30% 182 - 204
50% °C ASTM D-86 190 - 215
90% 238 - 290
FBP 288 - 340
Total Sulfur wt ppm ASTM D-3120 1800 Max.
Color ASTM Color ASTM D-1500 2.0 Max.
Flash point °C ASTM D-93 58 Min.
Density @ I5°C g/ml ASTM D-4052 0.7800 - 0.8400
Related Documents:
Material Safety Data Sheet

Product: HEAVY END

Producer: Nouri Petrochemical Co.

Typical Properties:
Composition Unit Method Specification
Distillation Range
IBP 160-180
10% 175-200
30% °C ASTMD86 187-209
50% 206-230
90% 270-313
FBP 313-370
Total Recovery % min 97
Total Sulfur ppm ASTMD5453 & ASTM D7039 1000-2000
Color _ ASTMD1500 & ASTM D6045 Max 2
Flash Point °C ASTM D7094 Min 60
Specific Gravity _ ASTMD4052 <0.82
Cetan Index _ ASTM D4737 Min 46
ASTM D97
Pour Point °C ASTM D5950 <-27
ASTM D6749
Related Documents:
Material Safety Data Sheet

Product: Aromatic Raffinate

Producer: Bandar Imam Petrochemical Co.

Typical Properties:
Typical Test Unit Method Specification
Paraffins Wt% ASTM D-5134 75 Min
Oleffins Wt% ASTM D-5134 3 Max
Naphthens + Aromatics Wt% ASTM D-5134 15 Max
Benzene Wt% ASTM D-5134 0.05 Max
DENSITY @ 15 °C gr/cm3 ASTM D-4052 0.65-0.7
RVP Psi ASTM D-323 10 Max
Total Sulfur Wt ppm ASTM D-5453 5 Max
Lead Content Wt ppb ASTM D-3237 5 Max
Color Saybolt - ASTM D-156 +25 Min
FBP °C ASTYM D-86 145 Max
IBP °C ASTYM D-86 30 Min
Related Documents:
Material Safety Data Sheet

Product: RAFFINATE

Producer: Nouri Petrochemical Co.

Typical Properties:
Composition Units Spec Method
RVP psia Max 9.5 ASTM D5191
IBP °C 32-49 ASTM D86
10% °C 50-59 ASTM D86
50% °C 60-80 ASTM D86
90% °C 80-100 ASTM D86
FBP °C 100-125 ASTM D86
Total Recovery % Min 97 ASTM D86
Paraffins Wt% Min 75 IFP 9302
Olefins Wt% Max 5 IFP 9302
Naphthenics Wt% 4.5-20 IFP 9302
Aromatics Wt% Max 7 IFP 9302
[email protected]°C gr/cm3 0.65-0.70 ASTM D4052
Total Sulfur ppm Max 5 ASTM D5453 & ASTM D7039
Color - 15 Max ASTM D1209
Related Documents:
Material Safety Data Sheet

Product: RAFFINATE

Producer: Bouali Sina Petrochemical Co.

Typical Properties:
TYPICAL TEST UNIT TEST METHOD SPECIFICATION
RVP psia ASTM-D-323 Max 1 1
IBP °C ASTM D-86 Min 3 0
FBP °C ASTM D-86 Max 130
Paraffinic wt% GC Min 70
Olefinic wt% GC Max 1 4
Density @ 15.6 °C kg/m3 ASTM D4052 650 - 740
Total Sulfur wt ppm ASTM D5453 Max 1.5
Color Saybolt Color ASTM D156 Min +18
Lead wt ppb GFAAS Max 5
Related Documents:
Material Safety Data Sheet

Product: AR Reformate

Producer: Bandar Imam Petrochemical Co.

Typical Properties:
Typical Test Unit Method Specification
Density at 15 º C gr/ml ASTM D-4052 To be reported
RONC … ASTM D-2699 98 Min
Benzene Wt% ASTM D-5134 1 Max
Total Sulfur Wt ppm ASTM D-5453 10 Max
Lead Content gr/l ASTM D-3559 0.005 Max
IBP °C ASTM D-86 45 - 65
FBP °C ASTM D-86 175 - 210
Aromatic Wt % ASTM D-5134 60 Min
Olefines Wt % ASTM D-5134 10 Max
C10+ Wt % ASTM D-5134 10 Max
R.V.P. E Psi ASTM D-323 10 Max
Related Documents:
Material Safety Data Sheet

Product: REFORMATE LOW BZ

Producer: Bouali Sina Petrochemical Co.

Typical Properties:
Typical Test UNIT METHOD Specification
IBP °C ASTM D86 min 37
FBP °C ASTM D86 185-210
Total Sulfur wt ppm ASTM D5453 Max 10
Lead content wt ppb AAS Max 10
Benzene wt% GC Max 2.0
Total Aromatic (6-9 carbon) wt% GC Min 58
C10+ wt% GC Max 5.5
RON … ASTM D2699 Min 95
Density @ 15.56 °C g/ml ASTM D4052 0.775-0.82
RVP PSI ASTM D323 Max 10
Related Documents:
Material Safety Data Sheet

Product: REFORMATE (A92)

Producer: Nouri Petrochemical Co.

Typical Properties:
Typical Test Unit Method Specification
Total Aromatics Wt% GC Min 40
Benzene Wt% Max 2
RVP Psi D-323 Max 10
FBP °C ASTM D5191 Max 215
Density @15.56°C gr/ml D-4052 Min 0.72
Total Sulfur Wt ppm D-5453 Max 50
Lead Content Wt ppb AAS Max 10
RON - D-2699 Min 95
Related Documents:
Material Safety Data Sheet

Product: Pentane Plus (C5+)

Producer: Bandar Imam Petrochemical Co.

Typical Properties:
Typical Test Unit Method Specification
Density at 15 °C g/cm3 ASTM D-4052 0.735 max.
RVP psi ASTM D-323 13 max.
Color saybolt -- ASTM D-156 16 min.
Lead content wt ppb ASTM D-3237 20 max.
Total Sulfur wt ppm ASTM D-5453 300 max.
IBP °C ASTM D-86 30 min.
FBP °C ASTM D-86 180 max.
Paraffins wt % ASTM D-5134 70 min.
Oleffins wt % ASTM D-5134 1 max.
Naphtenes + Aromatics wt % ASTM D-5134 Balance
H2S ppm ASTM D-2440 2 Max.
Total Choride ppm ASTM D-5808 10 max.
Related Documents:
Material Safety Data Shee

Product: Pentane Plus (C5+)

Producer: Persian Gulf Bidboland Gas Treating Co.

Typical Properties:
Composition Unit Method Specification
Density @15 °C gr/cm3 ASTM D 4052-18a 0.65 – 0.7
Saybolt Color Unit - ASTM D 156-15 25 (Min)
Reid Vapor Pressure Bara ASTM D323-15a 082 in Base Case
0.76 in Alt. Case
Lead Content PPB IP224/02(2014) 150 (Max)
Arsenic PPB wt. UOP 296 <50
Total Sulfur PPM wt. ASTM D5453-19a 20 (Max)
Total Paraffine W/W% GC Analysis 75 (Min)
Naphthene W/W% GC Analysis 15 (Max)
Olefines W/W% GC Analysis 0.5 (Max)
Aromatics W/W% GC Analysis 6 (Max)
Initial Boiling Point °C ASTM D86-19 30 (Min)
Final Boiling Point °C ASTM D86-19 180 (Max)
Chloride PPM wt. UOP 779-08 <1
Mercury PPB wt. UOP 938-10 <1
Carbon Di Sulphide PPM wt. ASTM D5623 <1
% Evaporation @ 60°C - - Min 25% Liquid Volume
Reactable Sulphur Content - GPA-1138 Negative
Max Reactable Sulphur content PPM mol RSH - 1 (Max)
RON - ASTM D-2699 60 (Min)
Related Documents:
Material Safety Data Sheet

Product: HTN

Producer: Bouali Sina Petrochemical Co.

Typical Properties:
TYPICAL TEST UNIT TEST METHOD SPECIFICATION
I.B. P °C ASTM D86 75-90
F.B. P °C ASTM D86 145-160
Specific gravity @ 15.5°C - ASTM D4052 0.72-0.75
R.V. P Psia ASTM D323 Max 5
Total Sulfur Wt ppm ASTM D5453 Max 1
Doctor Test - ASTM D4952 Negative
Benzene Content Wt% ASTM D5134 Max 3
Color Pt-Co Color ASTM D1209 Max 15
Boromine Index Mg/100ml ASTM D1492 Max 100
Total Paraffins Wt% ASTM D5134 Max 58
Total Naphtenes Wt% ASTM D5134 Max 38
Total Aromatics Wt% ASTM D5134 Max 28
C10+ Wt% ASTM D5134 Max 6
Related Documents:
Material Safety Data Sheet

Product: HTN

Producer: Nouri Petrochemical Co.

Typical Properties:
Composition Units Method Spec
I.B. P 75-90
10% 90-100
50% °C ASTM D 86 100-130
90% 130-150
F.B. P 145-170
Density @ 15.6 ºC gr/cm3 ASTM D 4052 TO BE REPORTED
R.V. P psi ASTM D5191 <5
Color (Pt-Co) Scale - ASTM D 1209 <15
Total sulfur wt ppm ASTM D 5453 & ASTM D7039 MAX <1
Doctor Test - ASTM D 4952 Negative
BZ Wt% IFP 9301 <3.7
Related Documents:
Material Safety Data Sheet

Product: DPG

Producer: Bandar Imam Petrochemical Co.

Typical Properties:
Typical Test Unit Method Specification
DENSITY AT 15 °C gr/cm3 ASTM D-4052 To Be Reported
COPPER CORROSION ----- ASTM D-130 No. 1a
TOTAL SULFUR WT PPM ASTM D-5453 300 Max
LEAD CONTENT WT PPB ASTM D-3237 10 Max
RECOVERY. VOL 5% °C ASTM D-86 35 Min
RECOVERY. VOL 95% °C ASTM D-86 190 Max
PARAFFINS WT % ASTM D-5134 To Be Reported
OLEFINS WT % ASTM D-5134 To Be Reported
NAPHTHENS WT % ASTM D-5134 To Be Reported
AROMATICS WT % ASTM D-5134 39 Min
DOCTOR TEST ----- ASTM D-4952 Positive
R.V.P.E Psi ASTM D-323 (CORROLATE) 10 Max
COLOR SAYBOLT ----- ASTM D-156 12 Min
Related Documents:
Material Safety Data Sheet

Product: Benzene

Producer: Bandar Imam Petrochemical Co.

Typical Properties:
Typical Test Unit Method Specification
PURITY Wt% ASTM D-4492 99.9 Min
DENSITY AT 15˚C gr/cm3 ASTM D-4052 0.8820 - 0.8860
DISTILLATION °C ASTM D-850 1 Max
RANGE
SOLIDIFICATION °C ASTM D-852 5.45 Min
POINT
TOTAL SULFUR Wt PPM ASTM D-5453 / ASTM D-4045 1 Max
H2S & SO2 CONTENT ---- ASTM D-853 Free Of H2S / SO2
ACIDITY mg NaOH/100ml SAMPLE ASTM D-847 No Free Acid
APPEARANCE ---- VISUAL Clear Free of Haze
/ Sediment
COLOR, Pt-Co SCALE ---- ASTM D-1209 10 Max
ACID WASH COLOR ---- ASTM D-848 1 Max
COPPER CORROSION ---- ASTM D-849 No.1a
NON - AROMATICS Wt PPM ASTM D-4492 700 Max
TOLUENE Wt PPM ASTM D-4492 150 Max
WATER CONTENT Wt PPM ASTM E-1064 / ASTM D-6304 200 Max
THIOPHENE Wt PPM ASTM D-1685 / ASTM D 5613 1 Max
TOTAL CHLORIDE Wt PPM ASTM D 4929 / ASTM D-5808 1 Max
TOTAL NITROGEN Wt PPM ASTM D-6069 / ASTM D-4629 1 Max
METHYLE-CYCLO- Wt PPM ASTM D-4492 200 Max
HEXANE
BROMINE INDEX mg Br/100gr ASTM D-1492 10 Max
Related Documents:
Material Safety Data Sheet

Product: Benzene

Producer: Nouri Petrochemical Co.

Typical Properties:
Composition Unit Method Specification
Purity WT% ASTM D7504 99.9 Min.
Toluene WT% ASTM D7504 0.015Max.
Non-Aromatics WT% ASTM D7504 0.07 Max.
Density @15.6 °C Gr/cm3 ASTM D4052 0.882-0.886
Appearance - Visual Clear, Free of haze/sediment
Color (Pt-CO) Scale - ASTM D1209 15 Max.
Acid Wash Color - ASTM D848 1.0 Max
Acidity mg NaOH/100mg ASTM D847 No free acid
Copper Corrosion - ASTM D849 Pass 1 A
Total sulfur Wt ppm ASTM D5453 & ASTM 1.0 Max.
D7039
H2S and SO2 content - ASTM D853 Free of H2S/SO2
Distillation Range °C ASTM D850 1.0 Max (Including 80.1)
Solidification point °C ASTM D852 5.45 Min
Water content Wt ppm ASTM D6304 200 Max
Thiophene Wt ppm IFP9421 1.0 Max
Total Chloride Wt ppm ASTM D7536 2.0 Max
Br.Index mg/100 gr ASTM1492 10 Max
Total nitrogen Wt ppm ASTM D4629 1.0 Max
Methylcyclohexane Wt ppm ASTM D4492 400 Max
Related Documents:
Material Safety Data Sheet

Product: Benzene

Producer: Bouali Sina Petrochemical Co.

Typical Properties:
TYPICAL TEST UNIT SPECIFICATION TEST METHOD
Benzene WT% 99:9 Min. ASTM D-4492
Non-Aromatic WT% 0.08 wt% Max. ASTM D-4492
Toluene WT% 0.02 wt% Max. ASTM D-4492
Specific Gravity at 15.56 °C/15.56°C ------ 0.882 - 0.886 ASTM D-4052
Organic Chloride mg/kg 1.0 Max. ASTM D-5808
Acidity Mg NaOH/100ml No free acid ASTM D-847
Distillation Range °C 1.0 Max. ASTM 0-850
Total Nitrogen wt ppm 1.0 Max. ASTM 0-4629
Total Sulfur mg/kg 1.0 Max. ASTM 0-5453
Color (Pt-CO) Scale ----- 10.0 Max. ASTM 0-1209
SO2 / H2S Content ----- Free of H2S/SO2 ASTM 0-853
Acid Wash Color ----- 1.0 Max. ASTM 0-848
Copper Corrosion ----- Pass with 1a ASTM D-849
Br.Index mg/100 gr 10. Max. ASTM 0-1492
Water content wt ppm Saturated ASTM E-1064
Appearance - Clear liquid Visual
at 18.3 - 25.6 °c
Related Documents:
Material Safety Data Sheet

Product: P-XYLENE

Producer: Bouali Sina Petrochemical Co.

Typical Properties:
TYPICAL TEST UNIT METHOD SPECIFICATION
P-xylene Wt% ASTM D-3798 Min 99.7
Non-Aromatic Wt% ASTM D-3798 Max 0.01
BZ +TOL Wt% ASTM D-3798 Max 0.01
Ethylbenzene Wt% ASTM D-3798 Max 0.15
O-xylene Wt% ASTM D-3798 Max 0.09
M-xylene Wt% ASTM D-3798 Max 0.19
Total Sulfur wt ppm ASTM D-5453 Max 1.0
Organic Chloride wt ppm ASTM D-5808 Max 1.0
Acid Wash Color ------ ASTM D-848 Max 1.0
SO2 I H2S content ----- ASTM D-853 Free of H2S/SO2
Distillation Range °C ASTM D-850 Max 1.0
Color (Pt-CO) scale ------ ASTM D-1209 Max 10.0
Sp-Gr at 15.56 °C/15.56°C ------ ASTM D-4052 0.858 - 0.875
Appearance ------ Visual clear Liquid free of
Sedimentation or haze & 18.3-
25.6 °C
Related Documents:
Material Safety Data Sheet

Product: P-XYLENE
Producer: Nouri Petrochemical Co.
Typical Properties:
Composition Unit Method Specification
Purity Wt% ASTM D7504 99.7 Min.
Non-Aromatics Wt% ASTM D7504 0.2 Max
Distillation Range °C ASTM D850 2 Max including
138.3
T-Sulfur Wt ppm ASTM D5453 & ASTM 1.0 Max
D7039
T-Chloride Wt ppm ASTM D7536 1.0 Max
[email protected]/15.6°c - ASTM D4052 0.8650-0.8661
So2/H2s content - ASTMD853 Free
Appearance - VISUAL Colorless, Clear
Tol+Bz Wt ppm ASTMD3798 300 Max
Ethyl Benzene Wt% ASTMD3798 0.3 Max
Color (Pt-co scale) - ASTMD1209 20 Max
M-xylene Wt% ASTMD3798 Max 0.25
O-xylene Wt% ASTMD3798 0.1 Max
Acid Wash Color - ASTMD848 1.0 Max
Related Documents:
Material Safety Data Sheet

Product: ORTHO XYLENE

Producer: Bouali Sina Petrochemical Co.
Typical Properties:
TYPICAL TEST UNIT METHOD SPECIFICATION
O-xylene Wt% ASTM D-3797 Min 98.5
Non - Aromatics Wt% ASTM D-3797 Max 0.3
C9 & Heavier Aromatics Wt% ASTM D-3797 Max 1.0
Total C8 Wt% ASTM D-3797 Min 98.5
Distillation range including the tem- ASTM D-850 Max 2.0
perature 144.4 °C @ 101.3 °C
kpa (760 mmHg) pressure
Total Sulfur wt ppm ASTM D-5453 Max 1.0
Color (Pt-CO) scale ----·-- ASTM D-1209 Max 20.0
Acidity mg NaOH/100ml ASTM D-847 None detected
SO2 / H2S Content ----- ASTM D-853 None detected
Density at 15.56 °C g/cm3 ASTM D4052 0.882-0.886
Related Documents:
Material Safety Data Sheet

Product: ORTHO XYLENE

Producer: Nouri Petrochemical Co.
Typical Properties:
Composition Unit Method Specification
Purity Wt% ASTM D7504 98 Min
Non - Aromatics Wt% ASTM D7504 0.8 Max
Bzn+C9 & Heavier Aromatics Wt% ASTM D7504 1.0 Max
Total C8 Aromatics+ Tolu- Wt% ASTM D2306 98 Min
ene+ Ethyl Benzene
Total Sulfur ppm ASTM D5453 & ASTM 1.0 Max
D7039
Color (Pt-CO) scale - ASTM D1209 20.0 Max
Acidity - ASTM D847 None detected
Hydrocarbon residue after ppm Wt ASTM D1353 20 Max
evaporation
SO2 / H2S Content - ASTM D853 None detected
Sp.gr @15.6 °C - ASTM D4052 0.88-0.89
Related Documents:
Material Safety Data Sheet

Product: Mixed-Xylenes
Producer: Bandar Imam Petrochemical Co.
Typical Properties:
Typical Test Unit Method Specification
Appearance ---- Visual Clear Free of Haza /
Sediment
Density @ (15 °C) gr/cm3 ASTM D-4052 To Be Reported
Color, Pt-Co Scale ---- ASTM D-1209 20 Max
Acid Wash Color ---- ASTM D-848 6 Max
Acidity mgr NaOH/100ml ASTM D-847 No Free Acid
IBP °C ASTM D-850 137 Min
FBP °C ASTM D-850 143 Max
Copper Corrosion ---- ASTM D-849 No .1a
H2S & SO2 Content ---- ASTM D-853 Free Of H2S & SO2
Distillation Range @ °C ASTM D-850 5 Max
760mmHg
Para - Xylene Wt % ASTM D-7504 16.5 Min
Ortho - Xylene Wt % ASTM D-7504 15 Min
Metha - Xylene Wt % ASTM D-7504 52 Max
Ethyle Benzene Wt % ASTM D-7504 23 Max
Benzene Wt ppm/Wt % ASTM D-7504 200 Max / 0.02 Max
Toluene Wt ppm/Wt % ASTM D-7504 9000 Max / 0.9 Max
C9 Aromatics Wt ppm/Wt % ASTM D-7504 7000 Max / 0.7 Max
Non-Aromatics Wt% ASTM D-7504 1 Max
Total Sulfur Wt PPM ASTM D-5453 / ASTM D-4045 1 Max
Total Chlorides Wt PPM ASTM D-5808 / ASTM D-4929 1 Max
Bromine Index mgr Br / 100 gr ASTM D-1492 40 Max
Related Documents:

Material Safety Data Sheet

Product: Toluene
Producer: Bandar Imam Petrochemical Co.
Typical Properties:
Typical Test Unit Method Specification
Density @ 15 °C gr/cm³ ASTM D-4052 0.870~0.873
Purity Wt % ASTM D-7504 99.90 min
NON-Aromatics Wt % ASTM D-7504 0.1 max
Benzene Wt % ASTM D-7504 0.1 max
C8+ Aromatics Wt % ASTM D-7504 0.1 max
Total Sulfur PPM ASTM D-5453 1 max
Appearance ----- VISUAL Clear free of Haze/sediment
SO2/H2S Content ----- ASTM D-853 Free of H2S/SO2
Acidity mg NAOH/100ml Sample ASTM D-847 No free acid
Color (Pt-Co Scale) ----- ASTM D-1209 20 max.
Acid Wash Color ----- ASTM D-848 2 max.
Related Documents:
Material Safety Data Sheet

Product: C9 Aromatic

Producer: Bandar Imam Petrochemical Co.

Typical Properties:
Typical Test Unit Method Specification
TOTAL SULFUR PPM ASTM D-5453 / ASTM D-4045 1 Max
Doctor Test ----- ASTM D-4952 Negative
5% Vol Distillation °C ASTM D-850 130 Min
95% Vol Distillation °C ASTM D-850 240 Max
Benzene Wt% ASTM D-7504 0.1 Max
TOLUENE Wt% ASTM D-7504 0.1 Max
C10+ Ar Wt% ASTM D-7504 25 Max
C8 & C9 Ar Wt% ASTM D-7504 75 Min
NON - AROMATICS Wt% ASTM D-7504 1 Max
RON ---- ASTM D-2699 100 Min
Color Saybolt ---- ASTM D-156 To Be Reported
DENSITY AT 15 °C gr / cm3 ASTM D-4052 To Be Reported
Lead Content Wt ppb ASTM D-3237 10 Max
Related Documents:
Material Safety Data Shee

Product: HEAVY AROMATIC

Producer: Nouri Petrochemical Co.

Typical Properties:
Composition Unit Method Specification
Non-Aromatic Max 1
Aromatic Wt% GC Min 99
Flash point °C ASTM D7094 Min 70
Density @15.56°C gr/cm3 D - 4052 Min. 0.91
Total sulfur ppm wt % D - 5453 Max 1
IBP °C D-86 Min 190
FBP °C D-86 Max 370
Related Documents:
Material Safety Data Sheet

Product: Caustic Soda

Producer: Arvand Petrochemical Co.

Description:
Caustic Soda Solution is a clear, colorless, odorless and slightly viscous liquid. It is miscible with water at
any ratio. Caustic Soda Solution reacts strongly alkaline and is highly corrosive to various materials.

Applications:
Caustic Soda Solution is a strongly alkaline product, which is applied as a chemical reactant or neutraliza-
tion agent in various areas, e.g. in chemical, pharmaceutical, textile, pulp and paper, metal and food in-
dustries, for agriculture, soap and detergent manufacturing or waste water treatment. Caustic Soda Solu-
tion reacts strongly alkaline and is highly corrosive and aggressive to various materials such as aluminum,
magnesium, zinc, glass and many plastic products.

Typical Properties:
Typical Test Unit Test Method Spec
NaOH % ASTM E291 Min 48.5
NaCl ppm ASTM E1787 Max 100
Iron (Fe) ppm ASTM E291 Max 3
Sp.Gr @ 15.6 °C Kg/Lit. Min 1.515
Appearance - Visual Clear
NaClO3 ppm ASTM E1787 Max 50
Packaging, Delivery and Storage:
Caustic Soda Solution is transported via railcar or road tanker. Above 25°C and for long storage times,
Caustic Soda Solution should be kept away from air. If exposed to air, Caustic Soda Solution will pick up
carbon dioxide to form sodium carbonate, which may cause haze of the solution.
In order to prevent carbonate formation, storage vessels should have minimized exposure to air, but a
venting possibility to equilibrate pressure during unloading or transfer processes. Heatable storage con-
tainers for Caustic Soda Solution are recommended in order to prevent crystallization during the cold

season. Caustic Soda Solution starts to freeze at temperatures as high as 10-12°C. When stored properly
under the conditions recommended, Caustic Soda Solution has a virtually unlimited shelf life.
Related Documents:
Material Safety Data Sheet

Product: Aniline

Producer: Karun Petrochemical Co.

Description:
Aniline is an organic compound with the formula C6H5NH2. Consisting of a phenyl group attached to an
amino group, aniline is the prototypical aromatic amine. Its main use is in the manufacture of precursors
to polyurethane and other industrial chemical.

Typical Application:
• It is used to prepare other chemical substances to make polymers. It is used in the dye indus-
try as well.
• Aniline is predominantly used as hardener in polymer industries.
• Aniline is predominantly used as a solvent, and has been used as an antiknock compound for
gasoline.

Typical Properties:
Typical Test METHOD SPECIFICATION
Appearance 30°C Visual Clear liquid
Aniline Purity, WT% GC/ 1-2.93-I015 Min 99.8
Nitrobenzene, ppm by wight GC/ 1-2.9.3-I013 Max. 0.5
Water, WT% GC/ 1-2.9.3-I005 Max. 0.2
Freezing Point, °C GC/ 1-2.9.3-N015 -6.2°C
Color, APHA GC/ 1-2.9.3-I006 Max 100
***The current manufacturing technology of Aniline is based on the Hydrogenation of Nitrobenzene.

Licensor:
Chematur Engineering (CEAB), Sweden.
Packing details:

In 220 lit (200 kg Net.) new steel drum, each 4 drums strapped on a wooden pallet.

Handling and storage conditions:

Prior to working with Aniline, you should be trained on its proper handling and storage. Aniline reacts
violently with OXIDIZING AGENTS (such as PERCHLORATES, PEROXIDES, PERMANGANATES, CHLORATES,
NITRATES, CHLORINE, BROMINE and FLUORINE) and STRONG ACIDS (such as HYDROCHLORIC, SULFURIC
and NITRIC) and may cause fires and explosions. Aniline is not compatible with ACETIC ANHYDRIDE;
CHLOROSULFONIC ACID; STRONG ACIDS (such as HYDROCHLORIC, SULFURIC and NITRIC); ALKALIES (such
as METAL HYDROXIDES and METAL CARBONATES); STRONG BASES (such as SODIUM HYDROXIDE and PO-
TASSIUM HYDROXIDE); and TOLUENE DIISOCYANATES. Store in tightly closed containers in a cool, well-
ventilated area away from AIR, LIGHT and COPPER. Sources of ignition, such as smoking and open flames,
are prohibited where Aniline is used, handled, or stored in a manner that could create a potential fire or
explosion hazard. Aniline attacks RUBBER, PLASTIC, and COATINGS.
Related Documents:
Material Safety Data Sheet

Product: Ethylene Dichloride (EDC)

Producer: Arvand Petrochemical Co.

Description:
Ethylene dichloride (EDC) is a colorless to yellowish liquid with a faint chloroform-type odour. EDC is used
primarily in the production of vinyl chloride monomer (VCM). Arvand Company’s EDC is produced by ox-
ychlorination and direct chlorination of ethylene at our petrochemical complex located in Iran.

Applications:
The largest use for ethylene dichloride is in the production of vinyl chloride monomer (VCM). More than
half of the total VCM consumption is for construction-related applications, with pipe being the largest
single product. Other products made from PVC resins include flooring, packaging film and sheet, and bot-
tles.

Typical Properties:
Typical Test Unit Method Specification
Purity % ASTM D6806 Min 99.9
Density @ 15.6 °C Kg/m3 =1253
Low Boil ppm ASTM D6806 Max 300
High Boil ppm ASTM D6806 Max 600
Non-Volatile matter ppm ASTM D2109 Max 15
Acidity (by HCl) ppm ASTM D2989 Max 5
Water ppm ASTM D3401 Max 50
Total Iron ppm Uhde NO. 3.4.1.25 Max 0.5
Free Chlorine ppm Uhde NO. 3.4.1.10 Max 2
Color (APHA) ppm ASTM D1209 Max 10
Handling and Storage:
Arvand Company recommends that prior to installing EDC storage facilities, you contact all concerned
local government agencies, i.e., fire department, health department, environmental
quality, etc. Local requirements may vary and any EDC installation should meet the standards of

these agencies.
Shipping:
Arvand Company supplies EDC in ocean going vessels from our plant in, Iran. EDC is classified
by the DOT as a highly flammable liquid.

Related Documents:
Material Safety Data Sheet

Product: MTBE

Producer: Bandar Imam Petrochemical Co.

Typical Properties:
Typical Test Units Test Method Spec
MTBE Wt% ASTM-D5441 98 Min
Methanol Wt% ASTM-D5441 0.7 Max
T.B.A Wt% ASTM-D5441 0.6 Max
C4 S Wt% ASTM-D5441 0.8 Max
C5+ Wt% ASTM-D5441 0.7 Max
H2O PPM ASTM-D1364 500 Max
Density at 15 °C g/cm3 ASTM-D4052 To Be Reported
Related Documents:
Material Safety Data Sheet

Product: Melamine

Producer: Urmia Petrochemical Co.

Description:
Melamine is an organic compound with the formula C3H6N6. This white solid is a trimer of cyanamide, with
a 1,3,5-triazine skeleton. Melamine can be combined with formaldehyde and other agents to produce
melamine resins. Such resins are characteristically durable thermosetting plastic used in high pressure
decorative laminates such as Formica, melamine dinnerware, laminate flooring, and dry erase boards.
Application:
• Wood industries: Transparent, beautiful and heat resistant on wood surface.
• Painting industries: Production of paint (production of automobile, bikes and etc.).
• Paper industries: For production of transparent, waterproof and anti-wrinkle paper.
• Leather working industries: provides of transparent, waterproof and durable leather.
• Firefighting industries: Fabricating fire block materials.
• Rubber industries: Promotion of adhesion.
• Adhesive industries: Production of waterproof, anti-heat and high elastic modulus wood adhe-
sives.
• Concrete industries: Improvement of pumping concrete without increasing the amount of water.
• Molding: Application of melamine resins in production of dinnerware.

Typical Properties:
Typical Test Unit Spec Test Method
Purity (w/w) % ≥99.8 JIS K 1531
Humidity (w/w) % ≤0.1 JIS K 1531
pH - 7.5-9.5 JIS Z 8802
Ash (w/w) % ≤0.03 JIS K 1531
Color Hazen (Pt - Co) ≤20 JIS K 1531
Turbidity NTU ≤20 JIS K 1531
Solubility in HCHO Minute ≤10 JIS K 1531
Size (below mesh 80) (w/w) % ≥80 JIS K 1531

Packaging:
The product is supplied in palletized 1000 kg bags.
Storage:
Should be stored dry and away from sources of heat and light. Please consult the safety data sheet for
information about the safety precautions necessary for transport, storage and processing.
Related Documents:
Material Safety Data Sheet

Product: Urea Granule (Fertilizer Grade)

Producer: Lordegan PetrochemicalCo.

Typical Application:
The product is used in agriculture as a popular solid nitrogenous fertilizer with highest nitrogen content.

Typical Properties:
Property Unit SPECIFICATION METHOD
Nitrogen content Wt% 46.0 Min ISO-5315
Water content Wt% 0.5 Max EN 13466-1
Biuret Wt% 1.0 Max BS EN15479
Formaldehyde Wt% 0.5 Max. ISO 14184
Particle size (2.0 – 4.0 mm) Wt% 90.0 Min ISO -8397
Licensor:
STAMICARBON
Packing details:

The product is supplied in bulk loading, 1000 Kg Jumbo bags and 50 kg Bags.
Handling and storage conditions:
Store in a dry, cool, and well-ventilated place. Protect from moisture. When heated, urea releases ammo-
nia and when heated to decomposition it emits toxic fumes of nitrogen oxides (NOx), ammonia. Incom-
patible with strong acids, strong bases, strong oxidizers, hypochlorites, nitric acid, halogens, sodium ni-
trite, phosphorus pentachloride and nitrosyl or gallium perchlorate.
Related Documents:

Material Safety Data Sheet

Product: Ammonia

Producer: Hengam Petrochemical Co.

Typical Properties:
Products Specification
State: liquid
NH3, min 99.9 wt%
H2O, max 0.1 wt%
Oil content, max 5 ppm wt.
To urea↓ To storage↓
Normal Pressure, bar 24 5
Normal Temperature, °C 20 -33
2200 MTPD
Design capacity (as 100% NH3)
726000MTPY

Physical and Chemical Properties

Color colorless
Odor very pungent
Melting Point -78 °C
Boiling point -33 °Cat 1.013 hPa
Flash point 132 °C - closed cup
Ignition temperature 651 °C
Lower explosion limit 15 %(V)
Upper explosion limit 25 %(V)
6.402 hPa at 15.5 °C
Vapor pressure
8.866 hPa at 21 °C
PH 11.1 - 11.6
Density (Liquid@ -33°C & I bar) 681 Kg/m3
Density (Vapor@ -33°C & 1 bar) 0.88 Kg/m3
Licensor:

TOPSOE
Related Documents:
Material Safety Data Sheet

Product: Liquid Ammonia

Producer: Lordegan Petrochemical Co.

Application:
Ammonia is used mainly in manufacture of nitrogen content fertilizers. It is also used in manufacture of
refrigerant agent, plastics, explosives, textiles, pesticides, dyes and other chemicals.

Typical Properties:
Typical Test Unit Spec Test Method
Purity wt% 99.90 Min. ISO-4276
Water content wt% 0.10 Max. ISO-7105
Oil content wt% NIL ISO-7106
Licensor:

Casale

Packaging:
Supplied in bulk (truck) loading and 40 kg cylinders.
Handling and storage:
Obtain appropriate training prior to handling. Store in a cool, well-ventilated place in accordance with the
Compressed Gas Association, Inc. pamphlet. Local regulations may require specific equipment for storage
and use. Do not breathe. Prevent contact with skin and eyes. Use non-sparking tools and explosion-proof
electrical equipment. Ground container and transfer equipment to eliminate static electric spark. For
more information, see the product MSDS.
Related Documents:
Material Safety Data Shee

Product: Sulfur Nitrogen (N.S.)

Producer: Urmia Petrochemical Co.

Description:
Urmia Petrochemical Company's nitrogen-sulfur fertilizer contains 20% nitrogen and 20% sulfur, which is
acidic and is the best fertilizer for Iran's soil conditions.
Features of sulfur nitrogen fertilizer:
• An optimal combination with the best effectiveness of nitrogen
• Has the property of gradual release of food (slow release)
• Reducing the negative impact of environmental stresses and diseases on plants
• A suitable supplement to use with other fertilizer compounds
Application:
Advantages of using sulfur nitrogen fertilizer:
• Better development of the root system
• Harvesting a product with better taste and superior quality
• Reducing the risk of nitrogen leaching
• Accelerating seed germination
• Strengthening plant roots and improving seedling quality
• Increasing the resistance of plants against adverse environmental factors: low temperature, low
light, lack of hydration
• Increasing stimulation of the growth process of all micro-organisms in the soil, which causes the
regeneration of humus, the absorption of minerals and nutrients in the soil by the plant.
Typical Properties:
Typical Test Unit Spec Test Method
N (w/w) % 18 ISO 5314
Humidity (w/w) % 1 ISO 8190
SO4 (S) (w/w) % 20 ISO 10084
Free Acid (H2SO4) (w/w) % 8 ISO 2993
Packaging:

The product is supplied in palletized 50 kg bags.

storage:
Should be stored dry and away from sources of heat and light. Please consult the safety data sheet for
information about the safety precautions necessary for transport, storage and processing.
Related Documents:
Material Safety Data Sheet

The Alchemist's Handbook A Practical Manual Instant EPUB Download
100% (10)
The Alchemist's Handbook A Practical Manual Instant EPUB Download
15 pages
Connecting The Chemical Industry Together !
No ratings yet
Connecting The Chemical Industry Together !
80 pages
49-00023 E - Coat Spec
100% (1)
49-00023 E - Coat Spec
16 pages
Unit I Introduction To Petrochemicals
No ratings yet
Unit I Introduction To Petrochemicals
36 pages
Procesos - Petroquimicos Hydrocarbon Processing
100% (1)
Procesos - Petroquimicos Hydrocarbon Processing
304 pages
Examination Number: .. NACTE Registration Number
No ratings yet
Examination Number: .. NACTE Registration Number
14 pages
Petrochemical
No ratings yet
Petrochemical
132 pages
Member List of PCMA
No ratings yet
Member List of PCMA
2 pages
Introduction To Petrochemicals
No ratings yet
Introduction To Petrochemicals
49 pages
GPCA18 Attendee List 151018 v3
No ratings yet
GPCA18 Attendee List 151018 v3
12 pages
List of Chemical Manufacturers
100% (1)
List of Chemical Manufacturers
1 page
M 20 Concrete - MIX DESIGN WITH MIX COARSE AGGREGATE
No ratings yet
M 20 Concrete - MIX DESIGN WITH MIX COARSE AGGREGATE
41 pages
Downstreams Awards at GRPC 2024
No ratings yet
Downstreams Awards at GRPC 2024
156 pages
12 PDF
No ratings yet
12 PDF
87 pages
Chapter 39 Plastic India Import Analysis
No ratings yet
Chapter 39 Plastic India Import Analysis
46 pages
W4V22 - Petrochemical Industry - Handout
100% (1)
W4V22 - Petrochemical Industry - Handout
6 pages
Overview of Petrochemicals: & Naphtha Cracker
No ratings yet
Overview of Petrochemicals: & Naphtha Cracker
41 pages
Companies List
0% (1)
Companies List
3 pages
Changes in Iec 60076-2
No ratings yet
Changes in Iec 60076-2
3 pages
Alkynes Reactions Summary
No ratings yet
Alkynes Reactions Summary
5 pages
Conveyor Chain. Web 4185 en - 0416 New Layout
No ratings yet
Conveyor Chain. Web 4185 en - 0416 New Layout
130 pages
Flow Chart New
No ratings yet
Flow Chart New
2 pages
SABIC Chemicals Brochure
No ratings yet
SABIC Chemicals Brochure
16 pages
Frictional Force
No ratings yet
Frictional Force
6 pages
Unit I Introduction To Petrochemicals PDF
No ratings yet
Unit I Introduction To Petrochemicals PDF
36 pages
Pakistan Chemical Manufacturers Association Members List
No ratings yet
Pakistan Chemical Manufacturers Association Members List
2 pages
Mark Scheme (Results) October 2019
No ratings yet
Mark Scheme (Results) October 2019
13 pages
Mah 2024-953
No ratings yet
Mah 2024-953
19 pages
Beauchemin 2008
100% (1)
Beauchemin 2008
32 pages
Petrochemicals
100% (1)
Petrochemicals
72 pages
CHM271 - Chapter 5 Chemical Kinetics
No ratings yet
CHM271 - Chapter 5 Chemical Kinetics
79 pages
1712116092945
No ratings yet
1712116092945
291 pages
Connecting The Chemical Industry Together !
No ratings yet
Connecting The Chemical Industry Together !
80 pages
Enzyme Distributors 4
No ratings yet
Enzyme Distributors 4
9 pages
Pakistan Chemical Expo
No ratings yet
Pakistan Chemical Expo
28 pages
Petrochemicals
100% (1)
Petrochemicals
25 pages
Enzyme Distributors 5
No ratings yet
Enzyme Distributors 5
9 pages
Plant Design RKD
No ratings yet
Plant Design RKD
130 pages
صناعات بتروكيمياوية
No ratings yet
صناعات بتروكيمياوية
146 pages
Connecting The Chemical Industry Together !: A Monthly Magazine Devoted To
No ratings yet
Connecting The Chemical Industry Together !: A Monthly Magazine Devoted To
80 pages
Undergraduate Chemistry Thesis Example
100% (3)
Undergraduate Chemistry Thesis Example
5 pages
F836 Class C3-80 S43100
No ratings yet
F836 Class C3-80 S43100
3 pages
PETROLIUM
No ratings yet
PETROLIUM
70 pages
Petrochemical 1
No ratings yet
Petrochemical 1
20 pages
Snarazak, Na Yahaya, R N A Rohmadi, N S Nordin
No ratings yet
Snarazak, Na Yahaya, R N A Rohmadi, N S Nordin
7 pages
Seismic Retrofitting of Reinforced Concrete Shear Wall Using Carbon Fiber Reinforced Polymers (CFRP)
No ratings yet
Seismic Retrofitting of Reinforced Concrete Shear Wall Using Carbon Fiber Reinforced Polymers (CFRP)
12 pages
Untitled Document
No ratings yet
Untitled Document
18 pages
Connecting The Chemical Industry Together !
No ratings yet
Connecting The Chemical Industry Together !
80 pages
Petrochemical Part
No ratings yet
Petrochemical Part
1 page
Review Literature
No ratings yet
Review Literature
11 pages
Connecting The Chemical Industry Together !: A Monthly Magazine Devoted To
No ratings yet
Connecting The Chemical Industry Together !: A Monthly Magazine Devoted To
78 pages
PCMA Member Directory
No ratings yet
PCMA Member Directory
11 pages
New Company Profile-2
No ratings yet
New Company Profile-2
8 pages
Revision & High-Level Exercises in Chemistry, Egyptian Curriculum, 1 Sec, For Chemistry Teacher Andrew Medhat 2023-2024
No ratings yet
Revision & High-Level Exercises in Chemistry, Egyptian Curriculum, 1 Sec, For Chemistry Teacher Andrew Medhat 2023-2024
70 pages
PRESTO CHEF - Professionnal Kitchen Range 70832 - Special ' Under Counter ' Bar-Deck-mounted Mixer Tap
No ratings yet
PRESTO CHEF - Professionnal Kitchen Range 70832 - Special ' Under Counter ' Bar-Deck-mounted Mixer Tap
1 page
Pakistan Chemical Expo 2025 Directory
No ratings yet
Pakistan Chemical Expo 2025 Directory
3 pages
Trimethylol Propane (TMP) : Investment Opportunity Scorecard
No ratings yet
Trimethylol Propane (TMP) : Investment Opportunity Scorecard
5 pages
Oil&NaturalGas Hesam Parsa
No ratings yet
Oil&NaturalGas Hesam Parsa
25 pages
Chapter 1
No ratings yet
Chapter 1
25 pages
+++ Fundamentals of Petroleum Refining
No ratings yet
+++ Fundamentals of Petroleum Refining
6 pages
Limfocite 1000 - 3500 (15 - 35%) Monocite 0 - 800 PMN: Bazofile 0 - 200 (0 - 2%) Eozinofile 0 - 700 (0 - 7%) Neutrofile 2000 - 6000 ( 60%)
No ratings yet
Limfocite 1000 - 3500 (15 - 35%) Monocite 0 - 800 PMN: Bazofile 0 - 200 (0 - 2%) Eozinofile 0 - 700 (0 - 7%) Neutrofile 2000 - 6000 ( 60%)
2 pages
Study of Alloys On Substituets
No ratings yet
Study of Alloys On Substituets
15 pages
Overview of Indian Petrochemical Industry
No ratings yet
Overview of Indian Petrochemical Industry
18 pages
Sampling Techniques
No ratings yet
Sampling Techniques
17 pages
New Insights Into Impact of Thermal Hydrolysis Pretreatment Temperature and Time On Sewage Sludge
No ratings yet
New Insights Into Impact of Thermal Hydrolysis Pretreatment Temperature and Time On Sewage Sludge
9 pages
Pet Roch
No ratings yet
Pet Roch
10 pages
KPL Principals
No ratings yet
KPL Principals
3 pages
Tc6muz 1
No ratings yet
Tc6muz 1
2 pages
GPCA Petrochemical Poster - 2022
No ratings yet
GPCA Petrochemical Poster - 2022
1 page
Petrochemicals Make Things Happen: Propane/Lpg Naphtha Ethane Methane
No ratings yet
Petrochemicals Make Things Happen: Propane/Lpg Naphtha Ethane Methane
2 pages
Production of Major Petrochemicals ProductWise or GroupWise 2009-10 To 2016-17 Updated As On 02-08-2017
No ratings yet
Production of Major Petrochemicals ProductWise or GroupWise 2009-10 To 2016-17 Updated As On 02-08-2017
4 pages
Jiamjariyatam 2022 Effects of Drying Processes On The
No ratings yet
Jiamjariyatam 2022 Effects of Drying Processes On The
10 pages
120702ogj International Survey
No ratings yet
120702ogj International Survey
7 pages
Pile Rebar Design Check
No ratings yet
Pile Rebar Design Check
7 pages
Petrochemical Processes: Segment 3
No ratings yet
Petrochemical Processes: Segment 3
59 pages
Petrochemical Industry
No ratings yet
Petrochemical Industry
12 pages
Industry Paper Petrochemicals Industry
No ratings yet
Industry Paper Petrochemicals Industry
12 pages
Ecobricx Brochure
No ratings yet
Ecobricx Brochure
4 pages
Using Pressure Sensitive Adhesive On Flat Surfaces: Application Guide
No ratings yet
Using Pressure Sensitive Adhesive On Flat Surfaces: Application Guide
4 pages
CL-50 Plus Product Brochure-TA
No ratings yet
CL-50 Plus Product Brochure-TA
2 pages
Different: From CP (He0g
No ratings yet
Different: From CP (He0g
2 pages
The Structure of The Indian Petrochemical Industry
No ratings yet
The Structure of The Indian Petrochemical Industry
56 pages
Study On Causes & Control of Cracks in A Structure: Mulla Fayaz
No ratings yet
Study On Causes & Control of Cracks in A Structure: Mulla Fayaz
4 pages
The Petrochemical Industry in India Has Been One of The Fastest Growing Industries in The Country
No ratings yet
The Petrochemical Industry in India Has Been One of The Fastest Growing Industries in The Country
6 pages