Scribd
Upload
15 views

SES Fire Test

The document is a Test Verification of Conformity for IronRidge, Inc.'s Flush Mount System with XR Rails, confirming compliance with specified fire resistance ratings. The tests were conducted by Intertek Testing Services from August 27, 2014, to March 17, 2015, under relevant safety standards. This verification is intended for the exclusive use of the client and does not imply product certification.

Uploaded by

98production
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views

SES Fire Test

The document is a Test Verification of Conformity for IronRidge, Inc.'s Flush Mount System with XR Rails, confirming compliance with specified fire resistance ratings. The tests were conducted by Intertek Testing Services from August 27, 2014, to March 17, 2015, under relevant safety standards. This verification is intended for the exclusive use of the client and does not imply product certification.

Uploaded by

98production
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

8431 Murphy Drive

Middleton, WI 53562 USA

Telephone: 608.836.4400
Facsimile: 608.831.9279
www.intertek.com

Test Verification of Conformity

In the basis of the tests undertaken, the sample(s) of the below product have been found to comply with the requirements of
the referenced specifications at the time the tests were carried out.

Applicant Name & Address: IronRidge, Inc.


28357 Industrial Blvd
Hayward, CA 94545
USA
Product Description: Flush Mount System with XR Rails.
Ratings & Principle Fire Class Resistance Rating:
Characteristics: -Flush Mount (Symmetrical). Class A Fire Rated for Low Slope applications when using Type 1,
2, 3, 13, 19, 25 and 29 listed photovoltaic modules. Class A Fire Rated for Steep Slope
applications with Type1, 2 and 3, listed photovoltaic modules. Tested with a 5” gap (distance
between the bottom the module frame and the roof covering), per the standard this system can
be installed at any gap allowed by the manufacturers installation instructions. No perimeter
guarding is required. This rating is applicable with any IronRidge or 3’rd party roof anchor.
Models: IronRidge Flush Mount with XR Rails
Brand Name:Signature: IronRidge Flush Mount
Name:
Relevant Standards: Nalini MandadiUL 2703 (Section 15.2 and 15.3) Standard for Safety Mounting Systems, Mounting Devices,
Position: Project Engineer
Clamping/Retention Devices, and Ground Lugs for Use with Flat-Plate Photovoltaic Modules
Date: 11/14/2014and Panels, First Edition dated Jan. 28, 2015 Referencing UL1703 Third Edition dated Nov. 18,
2014, (Section 31.2) Standard for Safety for Flat-Plate Photovoltaic Modules and Panels.
Verification Issuing Office: Intertek Testing Services NA, Inc.
8431 Murphy Drive
Middleton, WI 53562
Date of Tests: 08/27/2014 to 03/17/2015
Test Report Number(s): 101769343MID-001r1, 101769343MID-001a, 101915978MID-001 & 101999492MID-001ar1-cr1,
104428358MID-001 EEV
Revision Summary 8/27/2020 Added type 13, 19, 25 and 29 to system, update address.
This verification is part of the full test report(s) and should be read in conjunction with them. This report does not automatically
imply product certification.
Completed by: Chris Zimbrich Reviewed by: Chad Naggs
Title: Technician I, Fire Resistance Title: Technical Team Lead, Fire Resistance

Signature: Signature:
Date: 08/27/2020 Date: 08/27/2020

This Verification is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are
limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense
or damage occasioned by the use of this Verification. Only the Client is authorized to permit copying or distribution of this Verification. Any use of the Intertek name or one of its
marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test/inspection results
referenced in this Verification are relevant only to the sample tested/inspected. This Verification by itself does not imply that the material, product, or service is or has ever been
under an Intertek certification program.

GFT-OP-11a (24-MAR-2014)

You might also like