Scribd
Upload
18 views

Drilling_Blasting_Method_Statement_TOC_NATM

The Drilling & Blasting Method Statement (DBMS) outlines the procedures, responsibilities, and safety measures for drilling and blasting operations in a tunneling project. It includes details on project scope, geological conditions, equipment, and environmental considerations, as well as emergency response plans and waste management strategies. The document serves as a comprehensive guide to ensure compliance with applicable standards and regulations throughout the project.

Uploaded by

Yasin Asil
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
18 views

Drilling_Blasting_Method_Statement_TOC_NATM

The Drilling & Blasting Method Statement (DBMS) outlines the procedures, responsibilities, and safety measures for drilling and blasting operations in a tunneling project. It includes details on project scope, geological conditions, equipment, and environmental considerations, as well as emergency response plans and waste management strategies. The document serves as a comprehensive guide to ensure compliance with applicable standards and regulations throughout the project.

Uploaded by

Yasin Asil
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Drilling & Blasting Method Statement (DBMS)

Table of Contents

1. Introduction
1.1 Purpose and Scope
1.2 Project Overview
1.3 References and Standards
2. Project Description
2.1 General Overview
2.2 Geological and Geotechnical Conditions
2.3 Tunnel Cross-Sections and Alignments
3. Scope of Works
3.1 Drilling and Blasting Operations
3.2 Support Installation
3.3 Mucking and Ventilation
4. Applicable Standards and Regulations
4.1 National and International Standards
4.2 Safety Regulations
5. Responsibilities and Roles
5.1 Project Management Team
5.2 Site Supervisors and Engineers
5.3 Safety Officers and Blasting Crew
6. Equipment and Machinery
6.1 Drilling Equipment
6.2 Blasting Equipment
6.3 Ventilation and Mucking Equipment
7. Drilling Methodology
7.1 Drilling Pattern Selection
7.2 Drill Hole Depth and Angles
7.3 Borehole Alignment and Verification
8. Blasting Methodology
8.1 Explosive Selection
8.2 Charging and Delay Timing
8.3 Controlled Blasting Techniques (Smooth Blasting, Pre-Splitting)
8.4 Blast Monitoring and Adjustments
9. Explosive Handling and Storage
9.1 Storage Regulations
9.2 Handling Procedures
9.3 Security Measures
10. Safety Measures and Risk Assessment
10.1 Hazard Identification
10.2 Risk Mitigation Strategies
10.3 Emergency Preparedness
11. Environmental Considerations
11.1 Dust and Vibration Control
11.2 Noise and Air Quality Monitoring
11.3 Waste Handling and Disposal
12. Monitoring and Quality Control
12.1 Vibration and Ground Settlement Monitoring
12.2 Tunnel Convergence Measurement
12.3 Drilling and Blasting Performance Review
13. Emergency Response Plan
13.1 Incident Reporting Procedures
13.2 Evacuation Plans
13.3 Medical and Rescue Arrangements
14. Waste Management and Disposal
14.1 Muck Disposal Plan
14.2 Waste Segregation and Recycling
15. Communication and Reporting Procedures
15.1 Daily Reporting System
15.2 Coordination Meetings
16. Conclusion
17. Appendices
17.1 Tunnel Sections and Geotechnical Reports
17.2 Equipment and Material Specifications
17.3 Safety Data Sheets (SDS) for Explosives

You might also like