0% found this document useful (0 votes)
72 views25 pages

Pioneer MVH-S100UB CRT6126

This document is a service manual for the Pioneer MVH-S100UB/XINEW5 digital media receiver, intended for qualified technicians. It includes safety information, service precautions, specifications, and detailed procedures for servicing, disassembly, and parts replacement. The manual also contains block diagrams, diagnostic procedures, and an electrical parts list to assist in repairs and maintenance.

Uploaded by

xambikov
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
72 views25 pages

Pioneer MVH-S100UB CRT6126

This document is a service manual for the Pioneer MVH-S100UB/XINEW5 digital media receiver, intended for qualified technicians. It includes safety information, service precautions, specifications, and detailed procedures for servicing, disassembly, and parts replacement. The manual also contains block diagrams, diagnostic procedures, and an electrical parts list to assist in repairs and maintenance.

Uploaded by

xambikov
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 25

ORDER NO.

CRT6126
MVH-S100UB/XINEW5

DIGITAL MEDIA RECEIVER

MVH-S100UB /XINEW5

MVH-S100UBG /XINEW5

MVH-S100UBA /XINEW5

MVH-S100UBW /XINEW5

MVH-S010UB /XINEW5

PIONEER CORPORATION 28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021, Japan


PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 2 Jalan Kilang Barat, #07-01, Singapore 159346
PIONEER CORPORATION 2017
K-ZZZ JULY 2017
1 2 3 4

SAFETY INFORMATION
CAUTION
A
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.

Where in a manufacturer’s service documentation, for example in circuit diagrams or lists


of components, a symbol is used to indicate that a specific component shall be replaced only
by the component specified in that documentation for safety reasons, the following symbol shall
be used:
B

CAUTION
Danger of explosion if battery is incorrectly replaced.
Replaced only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.

CONTENTS
SAFETY INFORMATION..........................................................................................................................................................2
1. SERVICE PRECAUTIONS ....................................................................................................................................................3
1.1 SAFETY PRECAUTIONS ...............................................................................................................................................3
1.2 NOTES ON DISASSEMBLY / ASSEMBLY......................................................................................................................3
1.3 NOTES ON REPLACING PARTS ...................................................................................................................................3
1.4 OTHERS .........................................................................................................................................................................3
2. SPECIFICATIONS .................................................................................................................................................................4
2.1 SPECIFICATIONS...........................................................................................................................................................4
D 3. BASIC ITEMS FOR SERVICE...............................................................................................................................................4
3.1 CHECK POINTS AFTER SERVICING............................................................................................................................4
4. BLOCK DIAGRAM.................................................................................................................................................................5
4.1 BLOCK DIAGRAM ..........................................................................................................................................................5
4.2 POWER SUPPLY SYSTEM FIGURE..............................................................................................................................6
5. DIAGNOSIS...........................................................................................................................................................................7
5.1 OPERATIONAL FLOWCHART .......................................................................................................................................7
5.2 ERROR CODE LIST .......................................................................................................................................................8
5.3 CONNECTOR FUNCTION DESCRIPTION ....................................................................................................................9
5.4 FUSE CHECK .................................................................................................................................................................9
6. SERVICE MODE .................................................................................................................................................................10
E
6.1 DISPLAY TEST MODE1 ...............................................................................................................................................10
6.2 DISPLAY TEST MODE2 ...............................................................................................................................................11
6.3 SOFTWARE VERSION UP METHOD ..........................................................................................................................12
7. DISASSEMBLY....................................................................................................................................................................13
8. EACH SETTING AND ADJUSTMENT ................................................................................................................................15
9. EXPLODED VIEWS AND PARTS LIST...............................................................................................................................16
9.1 PACKING SECTION .....................................................................................................................................................16
9.2 EXTERIOR SECTION...................................................................................................................................................18
10. SCHEMATIC DIAGRAM ....................................................................................................................................................20
10.1 TUNER AMP UNIT......................................................................................................................................................20
10.2 KEYBOARD UNIT.......................................................................................................................................................21
11. PCB CONNECTION DIAGRAM ........................................................................................................................................22
F 11.1 TUNER AMP UNIT......................................................................................................................................................22
11.2 KEYBOARD UNIT.......................................................................................................................................................24
12. ELECTRICAL PARTS LIST ...............................................................................................................................................25

2 MVH-S100UB/XINEW5
1 2 3 4
5 6 7 8

1. SERVICE PRECAUTIONS
1.1 SAFETY PRECAUTIONS
A

- You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should
keep the safety during servicing by following the safety instructions described in this manual.

- Heat sink becomes hot areas. Be careful not to burn yourself.

HEAT SINK

1.2 NOTES ON DISASSEMBLY / ASSEMBLY


- Before disassembling the unit, be sure to turn off the power. Unplugging and plugging the connectors during power-on
mode may damage the ICs inside the unit.

- Please be sure to conduct line process to original status if you make assembling after repair. C

1.3 NOTES ON REPLACING PARTS


- Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by electrostatic induction.

- Please be careful of not to apply static charge onto integrated circuits, etc, when you conduct repair work.
Especially, please use soldering iron with its tip grounded. D
Also, please use a pair of tweezers with static charge protection capability if there is the possibility of contacting to device
terminals, and avoid the use of metal-made tweezers.

- The part listed below is difficult to replace as a discrete component part.


When the part listed in the table is defective, replace whole Assy.
Function Ref No. Part No. Reason
Tuner IC IC401 TEF6686HN-V102 with Bottom pad
DC DC Converter IC531 KBD9876EFJ with Bottom pad

1.4 OTHERS
- Notes on soldring
For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit.
Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for repairs
accompanied by reworking of soldering.

- To secure the front panel


The front panel can be secured with the supplied screw.

Screw
XXX7020

MVH-S100UB/XINEW5 3
5 6 7 8
1 2 3 4

2. SPECIFICATIONS
2.1 SPECIFICATIONS
A For all items except the backup current, refer to the Owner's Manual.
Backup current......................... 4.0 mA or less

3. BASIC ITEMS FOR SERVICE


3.1 CHECK POINTS AFTER SERVICING
To keep the product quality after servicing, please confirm following check points.
D
No. Procedures Item to be confirmed
1 Confirm whether the customer complain has The customer complain must not be
been solved. reappeared.
If the customer complain occurs with the Display, audio and operations must be
specific media, use it for the operation check. normal.
2 FM/AM tuner Check FM/AM tuner action. Display, audio and operations must be
(Seek, Preset) normal.
Switch band to check both FM and AM.
3 Appearance check No scratches or dirt on its appearance after
receiving it for service.

E
See the table below for the items to be checked regarding audio:
Item to be checked regarding audio
Distortion
Noise
Volume too low
Volume too high
Volume fluctuating
Sound interrupted

4 MVH-S100UB/XINEW5
1 2 3 4
4.1 BLOCK DIAGRAM
4. BLOCK DIAGRAM
4. BLOCK DIAGRAM
RL/SW RR/SW FL FR

B.UP
ACC
A MVH-S100UB/XINEW5
FM/AM ANT
Power Connector B MVH-S100UBG/XINEW5
C MVH-S100UBA/XINEW5

14. BREM &

15. B.UP

18. B.UP
16. GND
17. GND
13. ACC
D MVH-S100UBW/XINEW5

6. RR+

10. NC

12. NC
11. NC
2. FR+

A.ANT
5. RL+
1. FL+

5
8. RR-
5

4. FR-

9. NC
7. RL-
3. FL-
JA401
JA251 L
E MVH-S010UB/XINEW5
R
JA901 10A R/SW

P253

3A
A TUNER AMP UNIT
GND RCA GND

IC301 B. Up
IC POWER AMP
PAL014A

STBY MUTE

VDD3.3V S TBY
IC201
SYS+B 5.78 MUTE
E.VOL JASPER
PM9013A SYS+B SYS+B
RCA MUTE

6
MCLK,LRCLK
6

RESETB,STB
IC451

DATA,CLK
BCLK,DIN
DC to DC DDCON 5V
IC401
TUN 3.3V converter
Lithio 5V to 3.3V IC882
MVH-S100UB/XINEW5

IC681 VDD1.2 VDD1.2


MM3571A33P
S-Quad Flash VDD 3.3V S-1155B12-U5
IC881
TEF6686HN-V102 IC601 QVQ1045 Q501 VDD 3.3 V
CP_SW3.3V CP_SW 3.3V S-1170B33UC-OTS
TUNL TUNR SYSTEM LSAR523UB CPPWR Q861 B. Up
R5S726A0D216FP VDD3.3V IC821 VDD 6.8V
X-8086 TUNSCL,TUNSDA SWVDD5.3 KTD2092 DALMON
Memory: 64Kbyte VDD1.2V SWVDD5V NJM2831F53 SWVDD
X401 9.216MHz DALMON
SWVDD IC991
A.SENS ACC SYS+B5.78 SYS5.78V
CPPWR ASENS BD00GA3EEFJ
BT1.8EN BSENS SYSPW
BTPW SSENS B.SENS B.up
X603 16.93MHz ILMPW
NM
SYSPW TEL.IN IC951
SYNC TELIN BT 3.3V BT 3.3V
MM3411A33N
USBCTL
IC941
DDCON 5V
X601 12MHz DIMMER BT 1.8V BT1.8V
MUTE MM3479A18P BT18EN
RESET RESET VDD3.3V
USB&USB5V
B. Up

7
7

ILM SUPPLY B.up


DIMMR CTL Q851 IC531
2SCR514PGZE DD con EN
Q876
ROT0,ROT1

ILM+B KBD9876EFJ DD ON
3 5 ILM+B 2SAR502UB
SYNC
DP,DM

USB5V

DDCON 5V 367.347/439.024kHz
SYNC
SSENS
DSENS

DPDT

KYDT

SWVDD5V ILM+B DIM_PWM ILMPW DDCON 5V


IC532
USB5V USB 5 V
BD2232G
CN801

CN1941

B KEYBOARD UNIT
CN1941 Digital Line
1. DGND
2. ILMGND
3. SWVDD Communication Line
4. ROT1 AE B C D
5. ILM+B
6. ROT0 I2C Communication line
7. USBGND ILM+B
8. KYDT SOURCE
9. USBGND
10. DPDT I2S communication line
11. USB 5V
12. BTPW IC1801
13. DM Display System Audio Line
SWVDD5V key matrix

8
8

14. NC PD6586A8
15. DP
16. AUXGND Control line
17. AUXR
18. SOURCE
19.AUXL USB5V
20.DSENS L C D
CAW2056
JA1921 JA1901
GND
VBUS

D+
D-
5

AUX USB
F

A
1 2 3 4

4.2 POWER SUPPLY SYSTEM FIGURE

A
DALMON
B.Up Q861 VDD6.8V IC881
B.UP 15.1 V VDD3.3V
VDD 6.8 V 6.89 V VDD 3.3 V 3.30 V
typ : 14.4V S-1170B33
RESET IC 0.0024 mA 0.0024 mA 0.0024 mA S-80827CNNB
KTD2092
(10.8 V to 15.1 V) L901
MAX 363.1 mA MAX 254.2 mA
typ 220.9 mA typ 166.2 mA
MAX 2.981 W MAX 0.684 W
typ 1.659 W typ 0.606 W

VDD3.3V
FLASH ROM 25.0 mA 12.0 mA 0.005 mA MX25L1633E for Media u-com

VDD3.3V
SH Micon 85.0 mA 60.0 mA mA SH726B PVcc

IC882 VDD1.2
MEDVDD1.2 V 1.20 V
SH Micon 115.0 mA 80.0 mA mA SH726B Vcc
S-1155B12-U5
MAX 115.00 mA
B MAX 0.24 W
Actual survey 80.00 mA 225.0 mA 152.0 mA 0.0074 mA
typ 0.17 W

NM CPPWR
Q501
CP_SW3.3V
CP_SW
The certification IC 4.2 mA 4.2 mA 0.0 mA 337S3959
LSAR523UB

VDD3.3V
Jasper 25.0 mA 10.0 mA mA

TEL.IN mA

SYSPW
IC991
VDD6.8V 5.78 V
SYS+B5.78
SYS5.78 V JASPER
BD00GA3EEFJ
E-VOL 55.0 mA 38.0 mA mA
PM9013A
EVOL

MAX 73.0 mA
C MAX 0.081 W Power AMP 18.0 mA
Mute

SWVDD
IC821
VDD6.8V 5.25 V SWVDD5V
SWVDD5.3
NJM2831F53
GRILL 25.0 mA 14.0 mA mA M16C64C?
Microcomputer
MAX 35.9 mA
MAX 0.061 W

RBG_DAC 10.4 mA 2.4 mA mA BH2228AFV

LCD Module

Remote-control 0.5 mA 0.3 mA mA GP1UXC14RK


light receiving
35.9 mA 16.7 mA
department
SYNC DDON TUNPW
B.Up DDCON 5V IC451 TUN 3.3V
IC531 5.20 V TUN 3.3 V 3.30 V
DD 5 V
MM3571A33P
Lithio 215.0 mA mA mA Lithio
KBD9876EFJ
MAX 1915.0 mA MAX 215.0 mA
D typ 1100.0 mA typ 0.0 mA
MAX 1.106 W MAX 0.409 W
typ 0.636 W typ 0.000 W BT model only

NM
IC951 Run_Mode(Waiting_for_command)
DDCON 5V BT3.3 V
BT 3.3V 120.0 mA 120.0 mA 40.0 mA BT model only
MM3411A33N
MAX 0.120 W
IC941
DDCON 5V BT1.8 V
BT 1.8V 625.0 mA 180.0 mA 60.0 mA BT model only
MM3479A18P
MAX(Peak) 1.619 W
MAX 0.456 W

USBCTL
IC532
DDCON 5V USB 5 V 5.00 V USB5V
BD2232G
USB(VBUS) 1400.0 mA 1000.0 mA mA
1.0 A Correspondence

E
Q851
B.Up ILM+B
ILMPW mA
2SCR514PGZE
ILM+B 150.0 mA 120.0 mA

B.Up B.Up
Power AMP 300 mA 185 mA

6 MVH-S100UB/XINEW5
1 2 3 4
5 6 7 8

5. DIAGNOSIS
5.1 OPERATIONAL FLOWCHART
Power ON A

Vcc = 1.2 V Vcc : Pin 12, 20, 43, 78, 86, 109
PVcc = 3.3 V PVcc : Pin 3, 16, 28, 36, 48, 69, 82, 101, 112

BSENS
Pin 90 B

BSENS = L

ASENS
Pin 89

ASENS = L

DSENS C
Pin 34

DSENS = L

Starts
communication
with Grille
microcomputer.

300 ms
SWVDD <- H
Pin 1
300 ms

In case of the above signal, the communication


Source keys with Grille microcomputer may fail.
operative If the time interval is not 300 msec, the oscillator
may be defective.

E
Source ON

SYSPW <- H
Pin 8

Completes power-on operation.


(After that, proceed to each source operation) F

MVH-S100UB/XINEW5 7
5 6 7 8
1 2 3 4

5.2 ERROR CODE LIST

A
Common Apps
AMP ERROR START UP APP
This unit fails to operate or the speaker The application has not started running
connection is incorrect; the protection yet.
circuit is activated. – Operate the mobile device to start up
– Check the speaker connection. the application.
– Check the power IC and its peripheral circuit.
NO XXXX(NO TITLE, for example)
There is no embedded text information.
– Switch the display or play another
track/file.

USB device
FORMAT READ
B Sometimes there is a delay between the
start of playback and when you start to
hear any sound.
– Wait until the message disappears and
you hear sound.
NO AUDIO
There are no songs.
– Transfer the audio files to the USB
device and connect.
The connected USB device has security
enabled.
– Follow the USB device instructions to
disable the security.

SKIPPED
The connected USB device contains
C DRM protected files.
– The protected files are skipped.
PROTECT
All the files on the connected USB
device are embedded with DRM.
– Replace the USB device.
N/A USB
The connected USB device is not
supported by this unit.
– Disconnect your device and replace it
with a compatible USB device.

HUB ERROR
The USB device connected via a USB
hub is not supported by this unit.
– Connect the USB device directly to this
D unit using a USB cable.
CHECK USB
The USB connector or USB cable has
short-circuited.
– Check that the USB connector or USB
cable is not caught in something or
damaged.
The connected USB device consumes
more than maximum allowable current.
– Disconnect the USB device and do not
use it. Turn the ignition switch OFF
and back to ACC or ON. Connect only
compliant USB devices.
ERROR-19
Communication failed.
E – Perform one of the following
operations, then return to the USB
source.
• Turn the ignition switch OFF and
back to ON.
• Disconnect the USB device.
• Change to a different source.

ERROR-23
USB device was not formatted properly.
– Format the USB device with FAT12,
FAT16 or FAT32.
STOP
There are no songs in the current list.
– Select a list that contains songs.

8 MVH-S100UB/XINEW5
1 2 3 4
5 6 7 8

5.3 CONNECTOR FUNCTION DESCRIPTION

B
15 13 11 9 7 5 3 1 REAR OUTPUT or FM/AM ANTENNA
16 14 12 10 8 6 4 2 SUBWOOFER OUTPUT INPUT

1 FL+ 9 NC
2 FR+ 10 NC
3 FL- 11 NC
4 FR- 12 NC
5 RL+ 13 ACC
6 RR+ 14 B.REM
7 RL- 15 B.UP
8 RR- 16 GND
C

5.4 FUSE CHECK


- No sounds and display output of external unit (the condition when the fuse is blown)

This product may receive excessive current if the power line connection of the external product is incorrect, such as Ground
connection failure.
The fuse P253 on TUNER AMP UNIT is used to protect this product from this excessive current.
Even though the fuse is blown, the sounds of Pre-out output and AUX input are output properly and also other functions work D
correctly.
However, you cannot turn on the external product connected to this product as the power is not supplied if the fuse is blown.
(The symptom in this case is the sounds of external product are not output on this product when the external product is
connected on a vehicle.)

If you find the symptoms above, check if the fuse is not blown.
If you replace to a new fuse and the fuse is blown again (you cannot turn on the power of external product), check the power
connection (Ground) of external product.

2125
PLch C256 R256

CCG1192-A 820
>
100p/50

E
10u/10V P253
R258

C258

FM:-2.0 dBs
22k

CEK1404-A
3A
AM:-2.0 dBs
1

EMH53

1 2
Q252

RCA 1
P251

NM 2
RCAG AUX:+10.2 dBs
USB:+10.0 dBs
6

100p/50

P252
R257

C257

1 2
22k

OUTPUT 2125
C255 NM
PL
*JA251
CKB1115-
RCA
PRch 10u/10V R255 GND PR
3
CCG1192-A 820
L

JA251 FLch *C252

10u/10V
*R252

820
FL

FR
2
1
6 R
100p/50

CCG1192-A 5
*R254

*C254
R313

4
22k
R314

1 Set back chart


1

3
*Q251

EMH53

5
0.01u/16
P253

0.1u/10
1000p/50

C260

C261
*C259
100p/50

P251
R308
R309

*R253

*C253
22k

C261
R312

2125
C315

C260 P252 FRch *C251 *R251


C309
1

C259 CCG1192-A 820


E C122

C123 NM
C253

C257

C318 GND
C258

10u/10V
C314
Q251 Q252
C254 R122 C311
C313
5

15

C317

R254 R258
1

R253 R257
R252 R256 Q121
R251 R255
D121

C252 C251 C256 C255


R121
C121
C207
F
C206

C202
L201

MVH-S100UB/XINEW5 9
5 6 7 8
1 2 3 4

6. SERVICE MODE
6.1 DISPLAY TEST MODE1
A [How to enter Test mode]
Press and hold "5” and "6" buttons together, and turn BUP and ACC on.

SOURCE

3 5 6

Grille condition
Confirmation item Operate LCD ILM *1
All light up Button 5 + Button 6 States 1 ILM1
C All light off SOURCE States 2 (No light) No light
Conf. Button feeling Button 3 States 3 ILM2

LCD States *1
Model ILM1 ILM2
Status 1: All light up. Refer to "Draw 1" below for detail.
States 2: All light off MVH-S100UB/XINEW5 RED RED
Status 3: Refer to "Draw 2" below for detail. MVH-S100UBG/XINEW5 GREEN GREEN
MVH-S100UBA/XINEW5 AMBER AMBER
MVH-S100UBW/XINEW5 WHITE WHITE
MVH-S010UB/XINEW5 RED RED

Draw 1

Draw 2
E

10 MVH-S100UB/XINEW5
1 2 3 4
5 6 7 8

6.2 DISPLAY TEST MODE2

The information such as the system microcomputer version is checked. A

[How to enter Test mode]


Press and hold "1" and "3" buttons together, and turn BUP and ACC on.

[Operation key]
Operation key Processing Remarks
Enter display test mode 2
1+3 Switch display status

[Test items]
Start display test mode. Key Illumination Icon
Press and hold "1" and "3" buttons together, and turn * Initial
BUP and ACC on. Off All off condition

On (an initial value) All off


System Version information is displayed.
C

S $ $ $ $ # # #

$ PD number For PEA010A, "010A" is displayed


# System For Ver.7.01, "701" is displayed On (an initial value or
All off
microcomputer setting value of default
version menu)

Switching to next display


by pressing “ 1 ” + “ 3 ” buttons together.

Display is normally updated


Product operation is performed as usual, in appearance. On (an initial value or On (lighting condition
Switching to next display setting value of default of normal times)
by pressing “ 1 ” + “ 3 ” buttons together. menu)
E
Display update is stopped
The screen gets still when entering this item. On (an initial value or On (state when
setting value of default entering test mode)
Switching to next display menu)
by pressing “ 1 ” + “ 3 ” buttons together.

MVH-S100UB/XINEW5 11
5 6 7 8
1 2 3 4

6.3 SOFTWARE VERSION UP METHOD

A
Overview
This mode is used for upgrading the MCU software of system using USB memory.

How to enter in USB rewriting mode


Press and hold "1" and "2" buttons together, and turn BUP and ACC on.

USB rewriting operation flow


Explanatory note
Screen display and ON/OFF of illumination

USB Characters displayed on the screen

B Red frame: illumination lights up


Gray frame: illumination lights off
Blue characters: operation to be carried out by a user of USB rewriting function

Press and hold "1" and "2" buttons together, and turn BUP and ACC on.

START UPDT

Press LIST button


* After connecting USB memory in which upgrading file is stored, press LIST button.

(4) Retry count over Retry rewriting


C
As the reset is internally carried out,
display and illumination go out
Check of upgrading file is started
(2) Upgrading file is not detected
Upgrading file error
CHECK FILE
First time After retry
Rewriting is started
If the power supply is turned OFF
during rewriting, retry the rewriting.
DON'T STOP

Switched every
D
5 seconds (3) Rewriting failed

PRG **/100

(1) Rewriting succeeded

CAN'T UPDT COMPLETE ERR->RETRY FILE ERROR ERR->RETRY

E Display is continued until In 5 seconds, usual operation In 5 seconds, rewriting In 5 seconds, usual operation In 5 seconds, rewriting
the power supply is turned (OFF SOURCE) is retried (OFF SOURCE) is retried
OFF

Result of rewriting
(1) Rewriting succeeded Displayed when USB rewriting is normally terminated.
In 5 seconds, usual operation (OFF SOURCE) is started.
(2) Upgrading file error Displayed when there is no upgrading file in USB memory or the data of upgrading file is different.
Upgrading file is not detected In 5 seconds, usual operation (OFF SOURCE) is started.
If the upgrading file error is detected or the upgrading file is not detected after the rewriting is retried, the rewriting is failed.
In 5 seconds, rewriting is retried.
(3) Rewriting failed Displayed when the writing of upgrading file in serial Flash is not normally terminated.
Or, displayed if the upgrading file error is detected or the upgrading file is not detected after the rewriting is retried.
In 5 seconds, rewriting is retried.
(4) Retry count over Displayed when the retry becomes unavailable because the retry count is exceeded.
F The display is continued until the power supply is turned OFF. If the power supply is turned ON again, the display is not changed.
Since USB Updating is disabled, it is necessary to replace Flash ROM UNIT.

12 MVH-S100UB/XINEW5
1 2 3 4
5 6 7 8

7. DISASSEMBLY

While the photograph shown is slightly different from this model in shape, the disassembly procedure is the same. A

- Removing the Panel Assy (Fig.1)


1 1
1 Release the two latches.

2 2
2 Release the two latches and then remove
the Panel Assy.

Panel Assy Fig.1 B

- Removing the Tuner Amp Assy (Fig.2)

1 Remove the screw. 2 1


2

2 Remove the two screws.

The Chassis side is made a bottom.


C

3 Push the area and remove the two hooks.


Heat Sink Side

3 3

4 Slide the Tuner Amp Assy in the direction


Chassis Tuner Amp Assy
of the arrow and then remove the Tuner
Amp Assy.

Fig.2

- Removing the Tuner Amp Unit (Fig.3)


Tuner Amp Unit
1 Remove the two screws. E

2
2 Straighten the tab at location indicated
and then remove the Tuner Amp Unit.
1

F
Fig.3

MVH-S100UB/XINEW5 13
5 6 7 8
1 2 3 4

A - Disassembling the Panel Part (Fig.4, 5)


1. Remove the arm while bending the rib of the panel upward.

Fig.4

2. Press the upside hook and the bottom side hook of the
button at the same time, and pull out the button.

Fig.5

- Assembling the Panel Part (Fig.6, 7, 8)


1. Attach the button from the front side of the panel.
D

Fig.6

2. Attach the spring to the arm as shown in the figure.

The bended tip of the


spring is set to this side.

Hitch the spring to the groove. Fig.7

14 MVH-S100UB/XINEW5
1 2 3 4
5 6 7 8

3. Fit the spring in the groove at the position shown in the figure.
4. Fit the boss on the lower side of the arm in the lower hole of
the panel, and then warp the rib on the panel in the direction A
shown in the figure and fit the boss of the arm in the panel.

Fig.8

8. EACH SETTING AND ADJUSTMENT


There is no information to be shown in this chapter.

MVH-S100UB/XINEW5 15
5 6 7 8
1 2 3 4

9. EXPLODED VIEWS AND PARTS LIST


NOTES : Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List.
A The > mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
"
Screw adjacent to mark on the product are used for disassembly.
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions,apply as you think it appropriate.)
9.1 PACKING SECTION

16 MVH-S100UB/XINEW5
1 2 3 4
5 6 7 8

(1) PACKING SECTION PARTS LIST


Mark No. Description Part No. Mark No. Description Part No.

1 Unit Box See Contrast table (2) 11 •••••


2 Protector QHP3050 12 ••••• A

3 Protector QHP3051 13 •••••


4 Polyethylene Bag CEG1260 14 •••••
5 Accessory Assy QEA3318 15 •••••

* 6 Polyethylene Bag CEG1160 16 •••••


7 Handle QNC3119 17-1 Owner’s Manual QRD3508
8 Bracket QNC3086 * 17-2 Warranty Card CRY1376
9 Screw BSZ26P060FTC 18 Contain Box See Contrast table (2)
10 ••••• 19 Cord Assy QDP3071

B
20 Detach G Case QEG3004

(2) CONTRAST TABLE


MVH-S100UB/XINEW5, MVH-S100UBG/XINEW5, MVH-S100UBA/XINEW5, MVH-S100UBW/XINEW5 and MVH-
S010UB/XINEW5 are constructed the same except for the following:
MVH-S100UB MVH-S100UBG MVH-S100UBA MVH-S100UBW MVH-S010UB
Mark No. Symbol and Description
/XINEW5 /XINEW5 /XINEW5 /XINEW5 /XINEW5
1 Unit Box QHG4202 QHG4203 QHG4200 QHG4201 QHG4192
C
18 Contain Box QHL4202 QHL4203 QHL4200 QHL4201 QHL4192

Owner's Manual,Installation Manual

Part No. Language

QRD3508 English, French, Italian, Spanish(Espanol), German, Dutch, Russian

MVH-S100UB/XINEW5 17
5 6 7 8
1 2 3 4

9.2 EXTERIOR SECTION

B
B

A
E
B

C
A

18 MVH-S100UB/XINEW5
1 2 3 4
5 6 7 8

(1) EXTERIOR SECTION PARTS LIST


Mark No. Description Part No. Mark No. Description Part No.

1 Detach Grille Assy See Contrast table (2) 26 Screw BSZ26P160FTC


2 Keyboard Unit See Contrast table (2) > 27 Fuse(10 A) YEK5001 A
3 Lighting Conductor QNV3149 28 Screw BPZ26P080FTC
4 Contact Rubber QNV3144 29 Holder QNC3106
5 Rubber Connector QNV3129 30 Screw BSZ26P060FTC

6 Holder QNC3130 31 Chassis QNA3027


7 Sheet QNM3159 32 Screw ASZ26P050FTC
8 Segment LCD (V1801) CAW2056 33 Screw BSZ26P160FTC
9 Grille Unit See Contrast table (2) 34 Screw BSZ26P060FTC
* 10 Grille QNS4168 35 Panel Unit QXA5290

* 36 Panel QNS3289 B
* 11 Ds Tape QNM3206
* 12 Plate QNS4169 * 37 Arm QNV3025
* 13 Door QAT3029 * 38 Button QNV3026
* 14 Button(MUTE) QAC3277 39 Spring QBH3001
* 15 Lighting Conductor QNV3143 40 Case QNB3041

16 Button(SRC) QAC3278 41 •••••


17 Button(TRACK, 1-6) QAC3279 42 •••••
18 Button(DETACH) QAC3280 43 Cord Assy QDP3071
19 Button(EQ) QAC3283 44 Panel QNS3568
20 Spring CBH2210 45 Holder QNC3118
C

21 Cover QNS4170
22 Screw BPZ20P100FTC
23 Knob Unit QXA5051
* 24 Tuner Amp Unit See Contrast table (2)
25 Heat Sink QNR3012

(2) CONTRAST TABLE


MVH-S100UB/XINEW5, MVH-S100UBG/XINEW5, MVH-S100UBA/XINEW5, MVH-S100UBW/XINEW5 and MVH- D
S010UB/XINEW5 are constructed the same except for the following:
MVH-S100UB MVH-S100UBG MVH-S100UBA MVH-S100UBW MVH-S010UB
Mark No. Symbol and Description
/XINEW5 /XINEW5 /XINEW5 /XINEW5 /XINEW5
1 Detach Grille Assy QXA5164 QXA5165 QXA5166 QXA5167 QXA5162
2 Keyboard Unit QWM4666 QWM4670 QWM4669 QWM4741 QWM4666
9 Grille Unit QXA5154 QXA5155 QXA5156 QXA5157 QXA5152
* 24 Tuner Amp Unit QWM4731 QWM4732 QWM4742 QWM4743 QWM4747

MVH-S100UB/XINEW5 19
5 6 7 8
F

10.1 TUNER AMP UNIT


10. SCHEMATIC DIAGRAM
20

10. SCHEMATIC DIAGRAM


Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or
"ELECTRICAL PARTS LIST".
A TUNER AMP UNIT
PLch

FM/AM
NOTE : ROL RLch
1

1
ANTENNA C406 NM TUNL FLch
JA401 TUNER
CKX1104-
DGND C402 NM TUNR
Symbol indicates a resistor. C215 1u/10 C213 NM
C240

0.1u/10

0.1u/10
0.1u/10
*C239 NM

10u/10V
C216 1u/10

CCG1192-A
C459

No differentiation is made between chip resistors and


1u/10
TUNGND 2 1 C218 1u/10 DGND A GND 1u/10V

C212
AGND A GND

IMSA-6803-01Y900
DGND D GND

NM
L409
R420
3

NM
NM
P401
P402

C401
KN401
NM
discrete resistors.

NM

C202

C203

C204

C205
NM
L407

The > mark found on some component parts indicates

31 39p/50 CSS1867-
L201

10p/50
C405 TP412 NM

31 150p/50
Symbol indicates a capacitor.

C431
X401

C412

2125 C C G 1 1 9 2 - A
R409 R451 NM

NM

0.1u/16
10u/10V
C201

47u/16
1000p/50

10k
10k
NM
the importance of the safety factor of the part.
NM
RFGND C407 NM
No differentiation is made between chip capacitors and

C425

40

39

38

37

36

35

34

33

32

30

29

28

27

26

25

24

23

22

21

NM

NM
RFGND DGND
C408 NM

26 R410
27 R408
R411
D401
Therefore, when replacing, be sure to use parts of

INAN1L

INAP2L

INBN3L

INBP4L

IN5L

OUTPL

OUTRL

OUTFL

AGNDL1

AGNDL2

VREFL

AVDDL1

AVDDL2

DVDD2

RESETB

STB

CLK

DATA

DIN

BCLK

C206
discrete capacitors.

C207

C211

C208
C210
R407

PM9013A
NM
TUN_SCL

IC201

INAN1R
INAP2R

INBN3R

INBP4R

AVDDR1

AVDDR2

AGNDR1

AGNDR2
R417

L417

DAC_R 2 9
32

DAC_L 3 0

GPIO_0 2 8
NM

SCL 2 5
100

OUTPR

OUTRR

OUTFR

VREFR

DVDD1

LRCLK
NM
R437 4.7k

0
identical designation.

IN5R

DGND

TEST

DOUT

MCLK
L408 C434 R406

REG
GPIO_1

GPIO_2
1 24 TUN_SDA
0.27u 10p/50 SDA
VDDA_IFADC
C409 2 23 100 R438 4.7k
NM : No Mount AGND D GND DGND

10

11

12

13

14

15

16

17

18
NM 19

20
T401 VSSA_IFADC VSSD_IO
0.22u/6.3 3 22 C442

XTAL_IN
VSS
CTC1215- R401
C410 VBGP IC401 VDDD C462 NM
4 3 TEF6686HN-V102 CCG1192-A C217 1u/10

CCG1192-A L202
4 21

CTF1793-
22p/50 C430 1000p/50 VSSD 10u/10V
0 FM_CAP

C226
2 C461 NM

DR_Q_DATA DR_I_DATA
5 20 C423

I2S_SD_0
C411 C403 NM
R402 FM_IN_M I.C
5 1 33

AM_LNA_CAP
NM

CCG1192-A
6
FM_IN_P GND I2S_SD_1 1 9 C443
TUNER PW

AM_IN_P

150p/50

10u/10V
330p/50 0

0.1u/10

10u/10V
1u/10

1u/10
DGND
C428 7 18

C220

C221

C222
C235
RFGND VDDA_RF I2S_BCK NM
0.1u/10

DR_BCK
8 17 DGND

DR_BL

DR_WS
VSSA_RF I2S_WS IC451
C420 *C419 *R403 C429 L406 2125

C230

C229
9 TUN3.3 1 5 C465 PLch C256 R256

10

11

12
13

14

15

16
470p/50 NM 390 NM NM VOUT VDD D GND GND
>

C232 0.1u/10

C233 0.1u/10
*C418 C414 R422 2 NM CCG1192-A 820

CCG1192-A
MUTE

0.1u/16

100p/50
GND

10u/10V
NM

NM

NM
L405 10u/10V

1u/10
NM *L402 1000p/50 NM

C234
3 4 P253

C451

C452

C453

C404

C225

C224

R258

C258
NM
NM
*L403

FM:-2.0 dBs

22k
*L410 BT GND

NM
NM

NM

NM
LCTAW150J2520 NC CE CEK1404-A
1500p/50

3A

C464

C236

C237
1M

C238
NM

NM AM:-2.0 dBs

SYS5.78
NM

3
D402

R404

C413

R428

C421

C422

EMH53
*L404
1M

NM

NM

NM

MM3571A33P 1 2

Q252
NM

C223 P251 RCAG AUX:+10.2 dBs


*C415
*C417

*C416

CTF1389
R405

AGND 1 NM 2
USB:+10.0 dBs
NM
NM

NM
GND

100p/50
RFGND A GND P252
SYSB GND FRch

R257

C257
1 2

22k
ROR RRch 2125
C255 NM
PL
*JA251
CKB1115-
RCA
C449 C455 C457
PRch PRch 10u/10V R255 GND PR
NM NM NM RFGND
3
CCG1192-A 820
R436 C460 R439 L
NM NM 0 *C252 *R252 FL 2
D GND FLch 1
RFGND D GND RF GND RFGND RF GND
6 R
C458 10u/10V 820 FR
C450 R430

100p/50
0 1000p/50 uD GND RF GND uD GND RF GND RF GND D GND CCG1192-A 5

*R254

*C254
NM

RESETB
4

22k
TUNPW

LRCLK
Set back chart

TUNL
AUXL
AUXG

AUXR

TUNR

MCLK

BCLK

DATA

3
DIN

CLK

STB

*Q251

EMH53
D GND RFGND RFGND D GND

0.01u/16
RFGND RF GND

0.1u/10
1000p/50
*Q911 *Q912 *Q913 *Q914

C260

C261
*C259
100p/50
6

*R253

*C253
BSENS
ASENS

WIREDCNT1

RESETB

WIREDCNT2

MCLK

22k
3 4 3 4 3 4 3 4
*R914 NM

L681 2125
*R915 NM

*R917 NM

FLASH ROM
*R916 NM

NM X603 FRch *C251 *R251

R685
*IC681 GND

R684
2 2 2 2

0.1u/10
47k
CSS1794-

47k

R683

C681
47k
CCG1192-A 820
2

5 5 5 5 1 CS 8 16.93MHz

2
VCC 10u/10V NM GND
1 6 1 6 1 6 1 6 2 DO(IO1) 7 GND1
X1
HOLD(IO3)
AMP

12p/50

12p/50
NM NM

C633

C632
WIRED REMOTE NM NM 3 WP(IO2) 6 2 1
GND R312 0

NM
&RMIC GND WIREDCNT2 CLK
GND GND
4 GND GND2

R682 47k
5

R681
WIREDCNT1 R314 0

47k
DI(IO0) X2

3p/50
MIC_P
JA912 3 4 GND R313 NM 1

C682
MIC_P

C683
TAB1
NM QVQ1045 R661
6 MIC_N MIC_N OFFSET GND 2
OD
5 R310 NM
4 *R911 NM KEYAD2 KEYAD2 2.2k 3
MVH-S100UB/XINEW5

3 P-GND2

1608
C317
*R912 NM KEYAD1 4
2 KEYAD1 VDD3.3V RL-

NM
1 OUT2-

0.1u/10
SYS 5.78 V R308
5

C618

R629
*C638 GND

47k
STBY
D913

D914

L601 10k 6
RL+
VA911

C914

C915
VA912
C913
R913

2
C912

KN601 0.1u/10V
NM

NM
NM

OUT2+
NM
NM
NM

NM

NM

NM

3 NM NM 7

C318

R309
1 D GND

NM

NM
VCC1
*JA911

C624

C625
2125

NM

NM

NM

NM
R687

NM

NM
FL- 8

22p/50
NM P911 C312

C615
OUT1-

C313
1 2 NM DCH1263-A

NM
GND_TP1 9
10u/16V P-GND1
NM C639

C616 0.1u/10

C614 0.1u/10

0.1u/10
FL+ 10
GND AGND GND OUT1+

220
220

220
220

220

220

R302

R301

R303

R304
8

7
6

5
GND

47k
* R 9 1 8 NM 11

R624 100

47k
R622 47k
R648 47k
NM

R625 1k

0.1u/10
SVR

R615
C311 NM

47k
C617
12

R628

R614
D GND C301 0.47u/10 A GND

47k

47k
BT GND

R621

R620

R619

R618

R617

R616
IN1
C303 13

2
3

4
0.47u/10

1
R627

C613
R623
IN2

ASEBRK

C314
*Q501

TRST
*L501 VDD1.2V R311 14

TDO

NM
TCK

TMS
NM

TDI
LSAR523UB S-GND
C640 R664 L602
C304 0.47u/10 AGND 15
2.2k

NM IN4
NM
47k

*R506 4.7k NM

C626

C627
CPPWR 47k C302 0.47u/10 16

NM

NM
IN3
*R502 C641 R660 R686 C309
CP_SCL ACGND 17
*R501

*R503

AC_GND
2.2k *R507 100 *R510 47k 33p/50 NM NM CCG1205- FR+ 18
OUT3+

90

89
88

87

86

85
84
83

82

81
80

MD_CLK 79
78

77
76

75

74

73

72
71

70
69
68

AUDIO_X2 67
66

65
64

63
ASEBRK 62

TRST 61
*R509 47k R657 19

C315
GND

10k
*R508 100 C612 *1 P-GND3
GND

NM
CP_SDA

/BSENS
/ASENS

WIREDCNT1

EVOL_RST
Vcc

WIREDCNT2
Vss

/CDWAIT
PVcc

MD_BOOT

Vcc

QIO3
Vss
QIO2
QIO1
QIO0

QSSL

Vss

PVcc
AUDIO_X1

TMS

TDI

TDO
EVOL_MCK

QSPCLK

TCK

*R613
0.1u/10

*D601 NM
CP_SCL NM 91 60 FR- 20
*IC501 CPRST OUT3-
92 C611 C325 21
CP_SDA 59

R611
337S3959 *1 A B C D E VCC2
*R504

*R612
*R505

R630 93 0.1u/10 CCH1659- 22


2.7k

TUN_SCL NM 58 RR+
4.7k

1 8 R612 NM 10k 47k 22k 47k MU1 2200u/16V OUT4+


GND VCC AVref MODEL R305 R306
TUN_SDA R658 NM 94 GND 23
PAD TUN_SDA MODELAD 57 R613 47k 47k 10k 47k 22k P GND
2 AVcc MUTE
9 RST 7
* C 5 0 10 . 1 u / 1 0

SDA R634 NM 95 CP_SCL 10k 220 24


TUNPW CD_SCL AVss KEYAD1 56 KEYAD1 MUTE RR-

*D602
3 6 CP_SDA GND_TP2 OUT4-

R610
0.1u/10

NC1 SCL 47k Q301


96

10k
R647 25
CD_SDA TUN_SCL VDSENS 55 3 4

NM
P-GND4
*C502

4 5

NM
NC2 NC3 R653 97 26

1u/10
R307

C316
/CDSRQ 54 R609 47k KEYAD2 2 5

22k
KEYAD2 HSD
22p/50

22p/50

22p/50

47k 98 R659 NM 27

C323
TUNPW ROT0 53 ROT0 1 6
TAB2
TESTIN

0.1u/16
R631

VDD3.3
99

VDD1.2

C324
TESTIN CDSKIP 52 R646 47k EMD52

SYS5.78
iPod CP @(2.0C) 100k 100 Vss ASEMD 51 ASEMD R608 IC301
PAL014A
D GND NM

BUP
C631

47k
C630

C629

C619 101
0.1u/10
PVcc

102 BT_TESTMD
DP 50 DP
GND MUTE GND
BT_TESTMD DM 49 DM
GND

0.1u/10
R632 100 103 EVOL_BCK
BCLK PVcc 48

R651

R652
15k

15k
IC601

C610
LRCLK R633 100 104 EVOL_LRCK Vss 47 B.REM&A.ANT
USB5V CTH1584-
L531
USB5V DDON 105 DDON R5S726A0D216FP Vss 46 VDD1.2V VDD3.3
R883
47k
R981
C531 0.01u/16 DIN R635 106 EVOL_DATA XTAL 45 R607 C607
VDD1.2 VDD3.3V NM
R606 NM
CEVQW221M6R3

100 107 1.5k 12p/50 IC881


IC531 D532 Vss EXTAL 44 D GND
BUP3 S-1170B33UC-OTS D982
R531

C981
D981
CMS30I30A R636 1k

4
1 8 108 C609 0.1u/10 RR264MM-400TF

X2 3

NC1 2

NM
CLK Vcc 43

S-1155B12-U5
EVOL_CK
0
CCG1192-A

RB056L-40

LX VCC

VOUT

VIN
3

12.000000MHz
C620
10u/10V

3
109 R605 47k VIN NC
220u/6.3

2 7

CCG1192-A

CCG1192-A
9 0.1u/10 Vcc NMI 42

CSS1876-

10u/10V

10u/10V
4 3

*X601

IC882
GND BST R637
3 6 1k 110 EVOL_DT C608 VSS

ON/OFF

CCG1192-A
DDON DATA PLLVcc 41
1u/10

180k

2125

2125
C884

C885
R532

10u/10V
2 RR264MM-400TF

2125
C886
VC FIN EN
6.8k 6800p/25

R638 1k 111 0.1u/10 ON/OFF


VOUT
470

4 5 SYNC STB Vss 40

NC2

VSS
GND
C537 NM
NM

EVOL_CS 5 1
C536

X1

NC
FB SYNC
NM
NM

NM

C621 0.1u/10 112 PVcc 2125


RES 39 CCG1192-A
D901
C883
C535

C534

C533
C532
R534

D531

3
KBD9876EFJ D1F60-5053
1u/25

BT_TESTIN R601 NM 113 BT_TESTIN


C538

Vss 38
CCG1222-

C634
CCG1393-A

C635

R666

C606 10u/10V
NM

4.7u/25V

470u/16

R642 NM 114 D902


CKIO 37
R533

C541
2125
R535

Vss
43k

C539

NM D1F60-5053
GND C887

POWER SUPPLY,SPEAKER
12p/50 GND GND

R650

R604
R665 DIMMER+PCL C628

47k

47k
DIMMER 115 DIMMER PVcc 36
C540

2.2k
PCL_RAM_MON
116 PCL_RAM_MON 0.1u/10 L901 B.UP FUSE
SSENS 35 SSENS
SYNC /CDRST DSENS1 2 1
18 YEK5001
R639 D863 D861
>
MUTE 47k 117 MUTE USBCTL CDDADATIN /DSENS 34 DSENS SYS 5.78V Q861 CTH1261- (10A)
CDLRCKIN SYSPW D1F60-5053 GND2 GND1 17
SYNC USBFLG KTD2092 B.UP3
SYNC 118 33 R649 NM RR264MM-400TF
2.2k IC991 BUP2 BUP1 16 GND
R640
BT_LRCK

119 R645 47k

27k D R993
CDSCKIN
USBCTL 32
BTDATA

BD00GA3EEFJ-M
4 BT_BCK

DALMON

DCSENS

CDSTBY
15 B.UP

NM
BTRST

SYSPW
ISENS

ILMPW
GND
SWVDD

CPRST

CPPWR
TELIN
GND
PVcc

GND 120 R644 47k

PVcc
BREM
PVcc

BTPW

BTRX
BTTX

ROT1

KYDT

DPDT
FLG 31 BREM&
Vss

Vss
Vss

Vcc
Vss

CCG1192-A
Vcc
1 8 14

R862

R861

1.2k
22k
A.ANT

10u/10V
1u/16
IC532 R641 Vo VCC ACC

C992

R991
C993
2 7 1 3 ACC

NM
9 N.C
1

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30
5

10k

C991 1u/16
1 5 VBUS FB/Vo_s
VIN VOUT 3 6

1000u/16
NM
2 GND N.C
Q862

C863
GND 4 5 11 NC

4 . 3 kD
FLAG

C861
N.C EN

NM
3 4

R992

C994
FLG

0.1u/16
EN OC DALMON3 4
1000p/50

TELIN
0.1u/10

2125
C864
0.1u/10
1u/10

1u/10
C542
C544

C545

NM

NM
NM
NM

RST
NM

TELIN1
2 5
NM

NC
NM

1 5 9

0.1u/10

DZ2J068M0
RR-
R662

BD2232G USBCTL OUT NC2 RR-


R670
1 6
NM

RR-
NM
8
R603 47k

D862
USBCTL EMD52 RL-

47k
VDD RL-
R672

GND RL-
R602

3 4 7
R626

R655

R656

C862
1000p/50

R654

D671 VSS NC1 RR+


C601

C602

C603

RR+
6 RR+
*R669
R663

GND
47k

D GND RL+
NM

NM RL+
R667 10k

IC671 GND
NM

RL+
R668 47k

R671 5
C605

R643
S-80827CNMC-B8M FR-
FR-
100k VDD 6.8V FR-
C636 NM

C637 NM

4
C623

C671

1u/10
RESET FL-

C672
NM
FL-
C604

GND 3 FL-
FR+ FR+
DALMON 2 FR+
FL+
FL+
ASENS BSENS1 1 FL+
BT_LRCK

MIC_N C692 BSENS D691


SWVDD5
BT_RST

BT_BCK

BTDATA

DALMON

OFFSET

R692
JA901
SYSPW
ISENS

ILMPW

CPRST
CPPWR

TELIN

D GND
BTPW

BTRX

BTTX

ROT1
KYDT

DPDT

MIC_P
NM 100k CKM1624- FM:+24.0 dBs

R694
E1

B1

C2
DZ2J075M0

47k
1

3
AM:+24.0 dBs

HN1C01FUS1
Q691
BSENS&ASENS
GND AUX:+36.2 dBs
DSENS

VBUS

DP

DM

*R855
ASENS * D 6 9 2
R691
USB:+36.0 dBs

6
C1
5
B2
4
E2
*R696
BLUETOOTH
DUMMY
CN801 C801 1
L801
2
R817
NM ILMPW BSENS

0.1u/50
*R695

*C691
1/10W
U1

CKS6452- Q876 *R853 10k DZ2J075M0 1/4W

R693
D951 NM

33k
22

47k
RT1 RT1
RT2 RT2

1000p/50 2SAR502UB *Q851 1.2k


C945

BT1.8V REG GND


NM

*R852
R801 R816

R880 10k
NM 2SCR514PGZE C693
4 3

1k
D S E N S 20
BT1.8V BT3.3V REG 2.2k R813 100 CTF1713- 22 AUXL
100p/50

A U X L 19 *Q853 100p/50
GND R964 NM IC941 R803
24 1 BT3.3 S O U R C E 18
SSENS 3 4 GND TELIN
47k

47k
GND *R102

NM
R965 NM 1 5 5 1 R811 R814 100 2.2k AUXR 2 5
23 2 CE VOUT VOUT VDD A U X R 17
MIC_BIAS R815 22k
R881

2 2
2.7k

BT1.8V AUXG 1 6 *Q101

DZ2J100M0
A U X G N D 16
NM

22 3 GND GND TELIN

NM
B
R812
NM

*C851
R966 C963 NM 22k EMD52 LSAR523UB
R854

R882
C852

3 4 4 3 100 *D101
C951

22k ILMPW
C954

*C853
15

*D851
DP

0.1u
NM

21 4 CS VDD NC CE
NM

*R101 *L101
NM C964 NM *R103
C952

1608
C953
NM
NM

20 5 NC 14 BTH1101-

*R818
C966 NM IC951 Q877 15k

*R856
R970

NM

DM 13 LTC143EUB 1k
NM

NM
19 6 NM MC2848-11

CN1941
C943

C944

ILL SENS
C946
C942

R805 ISENS
NM
C961

NM
NM

NM

NM
C962

BTBOOT BTPW 12 BTPW


C941

18 7 D121 GND
US5V NM
Q121
NM NM
4

4
BTMCLK U S B 5 V 11 NM
17 8 R121 R123
DBG_TX GND R806
D P D T 10
DIMMER
16 9 DBG_RX ILM GND
GND USBGND NM NM

1u 50V
2.2k 1/4W
C965 GND

1608

1608
C123

C121

C122

R122
15 10 BT3.3V USBGND 9 3216

NM

NM

NM

NM
R807
KYDT
14 11 NM KYDT 8
NM

R808

8.2k

2.2k
NM

13 12 GND USBGND 7
C969

R809
NM

R969 NM BT_RST ROT0


ROT0 6
C967

C968

SWVDD5
R967 NM BTRX 2.2k GND GND NM
CN961 R968
ILM+B 5
R810
BTTX
MLV0402ES012V0010N

MLV0402ES012V0010N

NM ROT1
NM ROT1 4
2.2k SWVDD
C971 C970 SWVDD 3
0.01u/50 0.1u/10 R963 NM IC801
C805 0.1u/16
DZ2S068C

DZ2S068C

DZ2S068C

DZ2S068C

DZ2S068C

DZ2S068C

BTDATA
0.1u/16

IC821
ILMGND 2

MODEL
C811 1u/10

R962 NM BT_BCK DGND C803


GND 1 5 1 5
CCG1192-A

DGND 1
220p/50

CCG1192-A
INB VCC VIN
CONTROL
NM

NM

DPDT
220p/50

10u/10V
NM

NM

NM

VA802
VA801

R961
0.1u/10

NM NM 2 2

10u/10V
BT_LRCK
C806

DPDT
C807

RFGND
A MVH-S100UB/XINEW5
D805

BT GND ILM GND


D806

INA GND
C813

C842

C841
NM

NM

C809
C804

3 4 3 4
C812

C808
C802

C814
C810

GND OUTY NC VOUT


D807

D803

D802

B MVH-S100UBG/XINEW5
D808

D809

D810

NM
TC7SET08FUS3
NJM2831F53
C MVH-S100UBA/XINEW5
DGND ILM GND USB GND GND GND SWVDD5V D MVH-S100UBW/XINEW5
E MVH-S010UB/XINEW5

A A
8 7 6 5
21 MVH-S100UB/XINEW5

B
*V1801

56 COM3
COM3 55 COM2
COM2 COM1
COM1 54
53 COM0
COM0 SEG51
SEG51 52

SEG51
SEG50
SEG49
SEG48
SEG47
SEG46
SEG45
SEG44
SEG43
SEG42
SEG41
SEG40
SEG39
SEG38
SEG37
SEG36
SEG35
SEG34
SEG33
SEG32
51 SEG50
SEG50 50 SEG49
SEG49 SEG48
49
F
SEG48 SEG47
SEG47 48
47 SEG46
SEG46 SEG45
46

80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
SEG45 45 SEG44
SEG44 SEG43
44 R1801
SEG43 SEG42 1 60 SEG31
SEG42 43 DBG SEG31
42 SEG41
SEG41 SEG40 KYDT 47k 2 59 SEG30
41 KYDT SEG30
SEG40

SEG49
SEG48
SEG47
SEG46
SEG45
SEG44
SEG43
SEG42
SEG41
SEG40
SEG39
SEG38
SEG37
SEG36
SEG35
SEG34
40 SEG39
SEG39 SEG38 KST0 3 58 SEG29
39 KST0 SEG29
SEG38 38 SEG37
SEG37 SEG36 DPDT 4 57 SEG28
37 DPDT SEG28
SEG36 SEG35
36
SEG35 SEG34 KST1 5 56 SEG27
SEG34 35 KST1 SEG27
34 SEG33
SEG33 6 55

SEG51
SEG50
SEG33
SEG32
33 SEG32 SEG26
SEG32 SEG31 REM SEG26
32
SEG31 SEG30 KST2 7 54 SEG25
31 KST2 SEG25
SEG30 SEG29
30 R1802 47k
SEG29 SEG28 8 53 SEG24
29 RST SEG24
SEG28 SEG27
28
SEG27 SEG26 C1802 9 52 SEG23
27 ILMCLR1 SEG23
SEG26 SEG25
26
SEG25 SEG24 10 51 SEG22
25 NM

DGND
SEG24 ILMCLR2 SEG22

CAW2056
24 SEG23
SEG23 SEG22 11 50 SEG21

IC1801
23 V2 SEG21
SEG22 SEG21
22

PD6586A8
SEG21 SEG20 12 49 SEG20
21 V3 SEG20
SEG20 SEG19
20 R1803
SEG19 SEG18 13 48 SEG19
SEG18 19 VLCD SEG19
18 SEG17 2.2k
SEG17 SEG16 14 47 SEG18
17 VCC SEG18
SEG16 SEG15
16 46
SEG15 SEG14 KST3 15 SEG17
15 KST3 SEG17
SEG14 SEG13
SEG13 14 16 45
13 SEG12 C1806
SEG16
SEG12 SEG11 NC SEG16
SEG11 12 17 44
11 SEG10 0.1u/16 SEG15

DGND
SEG10 C SEG15

KDT0
KDT1
SEG10
SEG11

10 SEG9
SEG9 SEG8 18 43 SEG14
9 X0 SEG14
SEG8 SEG7

5MHz
SEG7 8 19 42
7 SEG6 SEG13
SEG6 SEG5 X1 SEG13
6

CSS1547-A
SEG5 20 41

X1801
5 SEG4 SEG12
SEG4 SEG3 VSS SEG12

KDT2
KDT3
COM0
COM1
COM2
COM3
SEG0
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
SEG7
SEG8
SEG9

SEG3 4
3 SEG2
SEG2

DGND
2 SEG1
SEG1

21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40

1 SEG0
SEG0
R1805

47k
E
R1806

47k
R1807
*D1951 R1952 R1951
GRILLE uCON

47k
CSL0401WBHCW1(A) 1/4W 1/4W R1808
100 180
C1951 *C1966 NM *R1997 47k

NM 1/8W 390 C1801


*D1953 *D1952 *R1998
KDT0
KDT1
KDT2
KDT3
COM0
COM1
COM2
COM3
SEG0
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
SEG7
SEG8
SEG9
SEG10
SEG11

DGND
1u/10
NM
KNOB MUTE
NM
*C1952 *C1954 *R1957
*R1851
L1801
NM NM 1/8W 390 47k
KST3
KST2
KST1
KST0

*D1955 *D1954 *R1958


SOURCE

NM
DISP LIST
OUT
*C1968 *R1953 1
GND
2
1

DGND
NM NM VCC
*IC1851
1
1
1
1
1
1

*C1851
*D1956 *R1954 3
2

SRC
DISP

CCG1192-A
EQ
2

2125
S1834
S1830
S1842
S1827
S1821

1/10W 1.8k
S1838
S1837

2
2
2
2
2
2
TRACK DOWN

EQ R1852 KDT0
*C1956 *C1955 *R1959
NM
DGND

NM NM NM
NM
1
1
1
1
1

REMOTE

*D1958 *D1957 *R1960


*R1853
3
6

R1999
R1990
R1989
R1988
R1986
R1984
R1982
R1980
R1979
R1978
R1977
R1975
R1974
MUTE

1/10W 470
S1835
S1831
LIST
S1843

2
2
2
2
2

TRACK UP TRACK DOWN

*1
S1828
S1822

D1952-D1967,D1985:SML-D12P8W(KL)
*C1958 *C1957 *R1961
NM
KDT1

D1969-D1984
NM NM NM
*D1960 *D1959 *R1962
D
1
KEY MATRIX

2
1

COLOR 2
1/10W 470
2 1
1
4
2

*C1960 *C1959 *R1963


S1836
S1823

S1832
TRACK UP

1
2

NM NM NM KDT2

NM
NM
NM
NM

470
820
820
820
820
820
470
680
A,E
*D1962 *D1961 *R1964

1.8k
1/10W 470
4 3
1
1
1

BLUE/GREEN

FC-1608SXK630D08
*C1962 *C1961 *R1965
5
S1833

2
2
2

BACK

NM NM NM
S1841
S1829

*D1964 *D1963 *R1966 KDT3

1/10W 470
6 5

1k
NM
NM
NM

820
820
820
820
680
680
470
680

1.2k
*C1953 *C1963 *R1967
SOURCE
NM NM 1/8W 390 DPDT
*D1966 *D1965

SML-D12D8W(RS)
*R1968 KYDT

NM
BACK SRC
*C1965 *R2001 *R1969

NM NM 1/4W 560

NM
NM
NM
NM

390
560
560
560
560
560
390
330
560
*D1967 *D1985 *R1970

TWH104-HS
NM
BEAT
B only
KST1 4
KDT2 5

ILM+B
*S1839
CSD1193-A

C
B only
*D1969
*1

*R1974
1
2
3
MULTI-CONTROL

*R1991 1/4W
BEAT *R1975
ILLUMINATION

0
*R1992
1/10W
DGND

* R 1 9 9 3 NM NM *D1970
*R1989

1/4W
EQ R1823
*R1990
6
5
4

27k
1/10W
ILMGND

*D1972 *D1971 *R1979


NM

ILMCLR

1/8W
*Q1953

BACK SRC *R1980


1
3

1/4W
AUX
1
2
3

*D1974 *D1973 *R1981 D1924


*R1995 *R1994
1/8W
DZ2S068C
ILMGND

TRACK DOWN TRACK UP


*R1996 NM NM *R1982
COLOR 1
AUX

0 1/10W D1921
CKN1090-

*D1976 *D1975 *R1983


NM
*JA1921

1/8W D1922
4 3 *R1984
NM
1/10W
Except B

D1923
E
B
A

D
C

*D1980 *D1979 *R1985


NM
0
0

1/8W
0

6 5
RED/AMBER/White

*R1986
NM

NM
R1923
R1921

NM
R1922

1/10W
*D1978 *D1977 *R1987

1/4W
1 C1921
B
2 *R1988
B

MODEL

0.1u/16
ILMGND

1/10W
*D1982 *D1981 *R1977

1/8W
DISP LIST *R1978

1/10W
MVH-S010UB/XINEW5
MVH-S100UB/XINEW5

*D1984 *D1983 *R1999


MVH-S100UBA/XINEW5
MVH-S100UBG/XINEW5

MVH-S100UBW/XINEW5
2.2k

1/8W
2.2k

R1942
R1941

MUTE KNOB *R2000

NM D1942

NM
D1941
DGND

USB
1

6
5
4
3
2

NM
SWVDD5V

USB

USBGND

C1901 D1901
DGND

CKS6443-
JA1901

NM NM
USBGND

C1902 D1902
ILMGND

0.01u/50 NM
CKS6451
CN1941

DGND
KEYBOARD UNIT

DGND ILMGND
1

9
8
7
6
5
4
3
2

20
19
18
17
16
15
14
13
12
11
10

DP
NC
DM
NC

AUXL
AUXR
DPDT
KYDT
ROT0
ROT1
DGND

DSENS
USB5V
ILM+B
SWVDD

SOURCE
AUXGND
USBGND
USBGND
ILMGND

A
A
CN801

10.2 KEYBOARD UNIT


8 7 6 5
F

11.1 TUNER AMP UNIT


11. PCB CONNECTION DIAGRAM
22

11. PCB CONNECTION DIAGRAM NOTE FOR PCB DIAGRAMS


1.The parts mounted on this PCB 2.Viewpoint of PCB diagrams
include all necessary parts for Connector Capacitor

A TUNER AMP UNIT


several destination.
For further information for
respective destinations, be sure SIDE A
SIDE A
1

1
to check with the schematic dia-
gram.
SIDE B
P.C.Board Chip Part
WIRED REMOTE
> P253 Fuse 3.0A CEK1404
FM/AM JA911
ANTENNA 1

RCA 2 3
2
OUTPUT JA912 5 1 4 6
JA401 POWER SUPPLY,
JA251 SPEAKER

R918
3 P911

R313
R314
4 1
6 5 3 2 1 5 15 25 JA901 D914
R913

P253
D913
IC301 C864
P251 C914

R308
R309
C261 10 20 D902
C915 C863

R312
16 18

C315
C260 P252 2 4 6 8 14 Q861
C309 FUSE C913

E
1
C259

VA911

VA912
1 3 5 7 9 11 13

E C122

C912
C123
C253

C257
C318
C258

R310
15 17
2

2
C314 C304 R981
Q251 Q252 C301 C302

R311
C254 R122 C311 R912 C862

C313
5

15

D982

C317
R254 R258 C324 C691
1

R253 R257 R301 R696 R123 D901 R911 D862


R252 R256 Q121 C312 C303
R251 R255 R303
D121 L901 Q862
MVH-S100UB/XINEW5

C323
C316

R302
C981

R304

1
C256 C255 D981 R695
C252 C251 C121 5
R121 D692
C207 R306
C206 Q911 Q912 Q914 Q913
R307 D691

R916
Q301
15 5
15 5

C993
C202

C992
15 R861 R862
L201
1 1

R691
R693
R694
R993
C211 C693 C692 R914 C325

C205
C460

C203
C204
C239

C210
C215
C216

C212 C223 R305

1
R436
KN401 C222
C201

R991
C208 IC991
R608

R917
1

C682
C213

R628

R627
C971 R685 R692
R623 L681
C991 1
R681

5
R992
P402 1 Q691
40 35 30 25

1
R615

R683
C681
C218 R915
D401

C638
P401 C401 R614
IC681 C994
C217 IC201
L408

D402 C434 C683 D863 D861

R684
C230
R405

C632
1 5 10 15 20 X603

C886
C410

C633
C411 R687
L405

R616
C420 C238 R682
R620
C615

R612 D602 C624 C883 C861

R617

C887
T401 C229 R624 D601

R852
C224 C226

1
R404

R610
C221

C232 C235 C625 L601 R856


C419

R648 R613 5

R618
1

R619

C613
5 C240 C616 IC881
R622

L101
C614 R611
L404

R621
C225
L202

C220 C627
L410

C418 C233 R661 C611 R605 1 Q851 D532


R506 R510 C617 C626 C885 Q853
1 C236 C234 D851
R646 1
R501

D101 R855 E

E R101
C237 R625 R883
R629

R502 C612

R647
C459 90 85 80 75 70 65
L417

R818
L531 D531 C541

60
L501
C618
E

C415 C403
C502 C501

L409 Q501 IC501 R609 L602 Q101 C851


R417 R507 C629 1 R853 C539
3

3
R102
C450 R659
C408

95

R880
5 R509 C853
R401
R402

55

C884
L403 R630 C534
C407

C429 C449 R505 R652 R882


L402

R632

R535
R103
R420

R533
IC531

R881
R686
R653

C619

1 R508 C540
C430

1
R403

C409
C416

100

1
Q876
C417 C405 C537

C610
R504 R651

R607
C428 IC882

50
C640 Q877
R503

C641
C639 C630 C607 R531 C536 C531

E
X401 R633 C841
5 1 C425 R631
1

R428
105

C414 R657 C631 C813 R854 C538


IC601 IC821 C533
10

R658

X601
C842
45
C413

R636

1
5
30

R660 R532

5
C422 C406 R451 R634 R635 C609 1

R817
R814
R815
R439 R664

R816
E
110

IC401 C402 C620 R806

R606
15

C421 C606 IC801 C852


40

C535
25

20 L407 R637 C532

R813
R601

C608
R408

C672
R639
R672

C412 C431 R638 C544

R805
C458 R801
115

R671 C808
R410

R642 C621
R406

R407

C423
35

C457 C635
C404 C961 R665 C628 R812R811 C802R803
C671
1

IC671
C442 R409 R666 R640 R534
C451 IC532

R604
120

C634
R644

10 15 20 25 30 C542 L801 C812


L406 1 5
D671

R668
R650
C462 C461 1
1
R422

R645

R641

C811
C443 R411 C965 R649
R669

R969

D805
R809
R643 R810

VA801
R438 R437

1
C801
R963

IC451 C453 C601


CN961
R968

R626

C814
C969 C602

C804
R602

C452 R663 R667 R807


R670

R430 C968 C605 C545 C805


R603

C962 D806
C464

C465 R656 C807


1 R962 R662 R808

C809
C455 10 5 C637
C967 R654 R655
C603
R967

R961 C636 D802 VA802


C806 C810

D810
D803

D808
D807
D809
IC951
C952

C803
1 15 20
C944

C941 C604 C623


U1
C953
KN601
1
C966

5
C942

C945 1 15
IC941 C943 5 10 20
R970
R965
R964

C970 1 C954
C946 C951
R966
C964
C963
D951 CN801
FRONT
4

4
B CN1941

A A
5 6 7 8
A
SIDE B

A
1
B
1

1
D
1
E
TUNER AMP UNIT

1
F

A
MVH-S100UB/XINEW5 23
5 6 7 8
F

11.2 KEYBOARD UNIT


24

B KEYBOARD UNIT SIDE A


1

1
IC1851
C1966

1
D1984

D1952

S1838 C1963

MUTE SRC S1837


55 50 45 40 35 30 25 20 15 10 5 1
USB
S1822 V1801
JA1901
1

D1971
D1965
S1839

D1970
D1956
2
1

C1953
3
BACK
S1841

D1966
D1983 4

D1951
D1972
5

C1968
5
S1829
D1953 S1843 6
C1951 C1954
LIST
S1828

MULTI-CONTROL AUX
2

2
D1954

JA1921
D1981

C1952
TRACK DOWN TRACK UP 1 2 3 4 5 6
S1842
DISP S1821
C1955 C1956 S1823 S1836 C1957
C1 9 5 8 S1834
S1835
C1 9 5 9 C1960 S1832
S1833
C1962 S1831 3
C1961
S1827
EQ S1830
MVH-S100UB/XINEW5

D1955 D1982
D1969
1 2

D1974

D1960
D1985

D1979
R2001

D1977

D1975

D1962
D1958

D1964
C1965

D1980
D1963
D1959
D1973

D1978

D1976
D1957

D1961
D1967

B KEYBOARD UNIT
A
SIDE B

CN801
3

3
D1941
10 20 R1923
R1921
R1994 1
R1995
R1942

R1969 R1962 C1921

R1961
D1942 R1922
R1996

R1970

D1923
D1921
R1989 R1981

D1922
R1975 R1982
R1801
R1983
1 5 15
R1957

R1990
R1974 Q1953
R1984 80 75 70 65
CN1941
R1991

60

R1965
1

R1958 1
R1941

R1986
C1802
5

55

R1966
R1977 C1901
R1992
R1993

R1952

D1902
R1951

R1985
10

R1964 R1802 L1801 IC1801


R1960

R1959
R1999

50
R1803

R1978
C1801 R1851 C1902
15

R2000 R1805
45
R1963
1

C1806 D1901
20

R1852
R1987
R1806 25 30 35 40
R1807
R1967 R1988
D1924

R1954 X1801
R1853
R1808

1
R1968
R1823
R1980
R1979

R1953
C1851

R1997
R1998
4

4
B B
5 6 7 8

12. ELECTRICAL PARTS LIST


NOTE:
Parts whose parts numbers are omitted are subject to being not supplied. A

The part numbers shown below indicate chip components.


Chip Resistor
RS1/_S___J,RS1/__S___J
Chip Capacitor (except for CQS.....)
CKS....., CCS....., CSZS.....
Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List.
The > mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
B
The expression of the unit in this manual is shown by u instead of . Please do not make a mistake.

Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
IC 882 Regulator IC S-1155B12-U5
A:MVH-S100UB/XINEW5 IC 991 Regulator IC BD00GA3EEFJ
B:MVH-S100UBG/XINEW5 > P253 Fuse 3.0 A CEK1404
C:MVH-S100UBA/XINEW5
D:MVH-S100UBW/XINEW5
E:MVH-S010UB/XINEW5
B
Unit Number: QWM4666(A,E)
Unit Number: QWM4670(B)
Unit Number: QWM4731(A) Unit Number: QWM4669(C) C
Unit Number: QWM4732(B) Unit Number: QWM4741(D)
Unit Number: QWM4742(C) Unit Name : Keyboard Unit
Unit Number: QWM4743(D)
Unit Number: QWM4747(E) MISCELLANEOUS
Unit Name : Tuner Amp Unit IC 1801 Flash Written UC IC PD6586A8

Unit Number: QWM4666(A,E)


Unit Number: QWM4670(B)
Unit Number: QWM4669(C)
Unit Number: QWM4741(D)
D
Unit Name : Keyboard Unit

A
Unit Number: QWM4731(A)
Unit Number: QWM4732(B)
Unit Number: QWM4742(C)
Unit Number: QWM4743(D)
Unit Number: QWM4747(E)
Unit Name : Tuner Amp Unit
E

MISCELLANEOUS
IC 201 E-VOL System LSI PM9013A
IC 301 Power Amp IC PAL014A
IC 401 Tuner IC TEF6686HN-V102
IC 451 Regulator IC MM3571A33P
IC 531 DC/DC Converter IC KBD9876EFJ

IC 532 Power supply IC BD2232G-G


IC 601 Blank Flash IC R5S726A0D216FP
IC 671 IC S-80827CNMC-B8M
IC 681 Flash ROM Unit QVQ1045
IC 801 Logic IC TC7SET08FUS3 F

IC 821 Regulator IC NJM2831F53


IC 881 Regulator IC S-1170B33UC-OTS

MVH-S100UB/XINEW5 25
5 6 7 8

You might also like