Scribd
Upload
11 views1 page

Connection Diagram For Simrad Maris E900 To Danelec VDR

The document provides a connection diagram for integrating the Simrad Maris E900 with the Danelec VDR, detailing IP addresses for the monitoring and planning stations. It specifies the use of LAN 1 for login configuration and VDR data, while LAN 2 and LAN 3 are typically used for radar connections, and LAN 4 and LAN 5 for ECDIS. The setup includes a network switch to facilitate these connections.

Uploaded by

ANDREASBOUL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views1 page

Connection Diagram For Simrad Maris E900 To Danelec VDR

The document provides a connection diagram for integrating the Simrad Maris E900 with the Danelec VDR, detailing IP addresses for the monitoring and planning stations. It specifies the use of LAN 1 for login configuration and VDR data, while LAN 2 and LAN 3 are typically used for radar connections, and LAN 4 and LAN 5 for ECDIS. The setup includes a network switch to facilitate these connections.

Uploaded by

ANDREASBOUL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Connection diagram for Simrad Maris E900 to

Danelec VDR

E900 MONITOR ING STATION E900 PLANNING STATION


LAN 1 LAN 1
IP ADDRESS 192.168.3.150 + 172.16.8.2 IP ADDRESS 192.168.3.151 + 172.16.8.2

NETWOR K SWITC H

VDR LAN 1 is for Login C onfiguration /VDR Data.

LAN 2 – LAN7

DANELEC VDR

OR

E900 MONITOR ING STATION E900 PLANNING STATION

IP ADDRESS 192.168.3.150 + 172.16.8.2 IP ADDRESS 192.168.3.151 + 172.16.8.2

LAN 2 – LAN7

DANELEC VDR

Note: For standard setting, usually the R adar is connect to LAN 2 & 3.
ECDIS is under second priority connected to LAN 4 & 5.

You might also like