JN0-664-Demo
JN0-664-Demo
JN0-664 Exam
Juniper Service Provider Routing & Switching Certification
https://authorizedumps.com/jn0-664-exam-dumps/
www.authorizedumps.com
Questions & Answers PDF Page 2
Version:7.0
Question: 1
Exhibit.
Referring to the exhibit; the 10.0.0.0/24 EBGP route is received on R5; however, the route is being
hidden.
What are two solutions that will solve this problem? (Choose two.)
A. On R4, create a policy to change the BGP next hop to 172.16.1.1 and apply it to IBGP as an export
policy.
B. On R4, create a policy to change the BGP next hop to itself and apply it to IBGP as an export policy.
C. On R4, add the internal IBGP interface prefixes to the BGP routing tables.
D. On R4, add the external EBGP interface's prefix to the IGP routing tables.
Answer: BD
Explanation:
www.authorizedumps.com
Questions & Answers PDF Page 3
Question: 2
You are responding to an RFP for a new MPLS VPN implementation. The solution must use LDP for
signaling and support Layer 2 connectivity without using BGP The solution must be scalable and
support multiple VPN connections over a single MPLS LSP The customer wants to maintain all routing
for their Private network
A. circuit cross-connect
D. translational cross-connect
Answer: C
Explanation:
AToM (Any Transport over MPLS) is a framework that supports various Layer 2 transport types over
an MPLS network core. One of the transport types supported by AToM is LDP Layer 2 circuit, which is
a point-to-point Layer 2 connection that uses LDP for signaling and MPLS for forwarding. LDP Layer 2
circuit can support Layer 2 connectivity without using BGP and can be scalable and efficient by using
a single MPLS LSP for multiple VPN connections. The customer can maintain all routing for their
private network by using their own CE switches.
Question: 3
Exhibit.
www.authorizedumps.com
Questions & Answers PDF Page 4
www.authorizedumps.com
Questions & Answers PDF Page 5
Referring to the exhibit, what must be changed to establish a Level 1 adjacency between routers R1
and R2?
A. Change the level l disable parameter under the R1 protocols isis interface lo0.0 hierarchy to the
level 2 disable parameter.
B. Add IP addresses to the interface ge-1/2/3 unit 0 family iso hierarchy on both R1 and R2.
C. Remove the level 1 disable parameter under the R2 protocols isis interface lo0.0 configuration
hierarchy.
D. Change the level 1 disable parameter under the R2 protocols isis interface ge-l/2/3.0 hierarchy to
the level 2 disable parameter.
www.authorizedumps.com
Questions & Answers PDF Page 6
Answer: D
Explanation:
Question: 4
You are asked to protect your company's customers from amplification attacks. In this scenario, what
is Juniper's recommended protection method?
A. ASN prepending
B. BGP FlowSpec
Answer: B
Explanation:
Question: 5
Exhibit
www.authorizedumps.com
Questions & Answers PDF Page 7
Which two statements about the output shown in the exhibit are correct? (Choose two.)
Answer: AB
Explanation:
The output is from the show l2vpn connections command on a Juniper router. This command is used
to verify the status of Layer 2 VPN (L2VPN) pseudowires between Provider Edge (PE) routers.
www.authorizedumps.com
Questions & Answers PDF Page 8
Instance: vpn-A
The output shows the last time the connection was up:
The "# Up trans" value is 1, meaning this connection has been established once and has not flapped
since it was initiated.
The legend includes "VM – VLAN ID mismatch", but this status is not present in the connection
output.
Flow Labels
The Flow Label Transmit is No, and the Flow Label Receive is No.
This means the PE router does NOT have the capability to pop flow labels.
www.authorizedumps.com
Thank You for trying JN0-664 PDF Demo
https://authorizedumps.com/jn0-664-exam-dumps/
[Limited Time Offer] Use Coupon " SAVE20 " for extra 20%
discount the purchase of PDF file. Test your
JN0-664 preparation with actual exam questions
www.authorizedumps.com