Scribd
Upload
7 views

Technical Data Sheet (2)

Petrothene GA625962 is a hexene LLDPE resin suitable for rotational molding, known for its excellent flow properties and high environmental stress crack resistance. It is used in applications such as toys, drums, and storage containers, and is available in both pellet and powder forms. The product is commercially active in North America and complies with relevant safety and regulatory standards.

Uploaded by

fguasta
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
7 views

Technical Data Sheet (2)

Petrothene GA625962 is a hexene LLDPE resin suitable for rotational molding, known for its excellent flow properties and high environmental stress crack resistance. It is used in applications such as toys, drums, and storage containers, and is available in both pellet and powder forms. The product is commercially active in North America and complies with relevant safety and regulatory standards.

Uploaded by

fguasta
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet

Petrothene GA625962
Linear Low Density Polyethylene

Product Description
Petrothene GA625962 is a hexene LLDPE pelletized rotational molding resin with excellent flow properties
selected by customers to produce a variety of objects such as toys, playground equipment, drums and
agricultural and chemical storage containers. GA625962 exhibits high ESCR, low temperature impact strength
and warp resistance. GA625962 is UV-stabilized and available in a 35-mesh powder as Microthene MP625962.
Regulatory Status
For regulatory compliance information, see Petrothene GA625962 Product Stewardship Bulletin (PSB) and
Safety Data Sheet (SDS).

Status Commercial: Active


Availability North America
Application Containers; Drums; Sports, Leisure & Toys
Market Outdoor Equipment; Rigid Packaging
Processing Method Rotomolding

Nominal English Nominal SI


Typical Properties Value Units Value Units Test Method
Physical
Melt Flow Rate, (190 °C/2.16 kg) 5.0 g/10 min 5.0 g/10 min ASTM D1238
Density, (23 °C) 0.935 g/cm³ 0.935 g/cm³ ASTM D1505
Mechanical
Flexural Modulus
(1% Secant) 105000 psi 725 MPa ASTM D790
(2% Secant) 91000 psi 625 MPa ASTM D790
Tensile Strength at Yield 2700 psi 18.6 MPa ASTM D638
Environmental Stress Crack Resistance, Fཥའ
>1000 hr >1000 hr ASTM D1693
(100% Igepal®, Cond A)
Impact
Low Temperature Impact
1/8" specimen @ -40 °F 55 ft-lbs 75 J ARM
1/4" specimen @ -40 °F 155 ft-lbs 210 J ARM
Thermal
Deflection Temperature Under Load
(66 psi, Unannealed) 131 °F 55 °C ASTM D648
(264 psi, Unannealed) 102 °F 39 °C ASTM D648

LyondellBasell Petrothene GA625962


Technical Data Sheet Recipient Tracking #:
Date: 3/5/2025 Page 1 of 2 Request #: 5599633
Notes
Tensile properties were run with a crosshead speed of 2 inches/min or 50 mm/min.
Igepal® is a registered trademark of Rhodia.
Low Temperature Impact testing was performed according to the Association of Rotational Molders (ARM)
International Test Protocol.
These are typical property values not to be construed as specification limits.
Processing Techniques
Specific recommendations for resin type and processing conditions can only be made when the end use,
required properties and fabrication equipment are known.
Company Information

For further information regarding the LyondellBasell company, please visit http://www.lyb.com/.

© LyondellBasell Industries Holdings, B.V. 2018


Disclaimer

Information in this document is accurate to the best of our knowledge at the date of publication. The document is
designed to provide users general information for safe handling, use, processing, storage, transportation,
disposal and release and does not constitute any warranty or quality specification, either express or implied,
including any warranty of merchantability or fitness for any particular purpose. Users shall determine whether the
product is suitable for their use and can be used safely and legally.

In addition to any prohibitions of use specifically noted in this document, LyondellBasell may further prohibit or
restrict the sale of its products into certain applications. For further information, please contact a LyondellBasell
representative.
Trademarks

The Trademark referenced within the product name is owned or used by the LyondellBasell family of companies.

LyondellBasell Petrothene GA625962


Technical Data Sheet Recipient Tracking #:
Date: 3/5/2025 Page 2 of 2 Request #: 5599633

You might also like