Automatic reconnection: Increase/Decrease volume: For Initial Use: A: Please check if the device has connected to phone media

For Initial Use: A: Please check if the device has connected to phone media and Normally, the distance of ears, mobile brands, and surrounding and the warranty will be voided.
Product Description Product Diagram Features Triple tap on R/L MFB to increase/decrease volume respectively. 1. Keep your bluetooth device within 10 ft. while pairing. media audio. If it is connected to the phone media, the sound will environments may have different interference. 6. Enter/Exit DUT: Tap the MFB button to enter DUT status in
1. When the earbuds are turned on, it will automatically connect

Airflow Plus
2. The earbuds will turn on and enter into the pairing state come out of the mobile phone while you are listening to the the status of mono pairing. Tap it three times to reset.
Model: HAMMER Airflow Plus
MFB Button Description (Touch sensor hearing referred as MFB to the paired device within the effective distance.
Charging Case Opening Low Battery (Power-off): automatically while being picked up from the charging case music, but if it is already connected to the media audio, the 4. No response when charging the earbuds through the power bank
Bluetooth Version: V5.1 Button) 2. When the distance between the phone and the earbuds The Airflow Plus earbuds will turn off automatically when the (red and blue light flashes alternatively). And then the left and sound will come out of the mobile phone when answering a A: The input current of the earbuds is too low for the power bank
Battery Type: Rechargeable lithium battery exceeds the effective distance, they will automatically connect battery voltage is less than 3.1V. right earbuds will connect with each other, left earbud will auto phone call. The sound will come out of the earbuds only when to identify its battery status, therefore, the power bank will not
Contact Us
Battery Capacity (Earbuds): 35mAh Power-on: when you return to the effective distance in 3 minutes. enter into pairing mode, while LED light on right earbud will be both the phone audio and media audio are connected to the supply power to the earbuds and it will turn off automatically.
Hold the MFB button for 3 seconds, red and blue indicator turn off. Which means the left and right earbuds have been device. For any enquiries, issues or comments concerning our products,
Battery Capacity (Charging case): 300mAh LED No Connection (Power-off):
flashes, and the earbuds will enter into pairing mode. mutually matched successfully. please send an E-mail or call us. We will respond as soon as
Frequency Range: 20HZ~20KHZ MFB
Sound Hole Answer/ Hang-up call: When there is no command for connection within 5 minutes, Tips
Tips
Or you may take out the earbuds from the charging case, they 3. Turn on the Bluetooth function of the mobile and click device 2. The earbuds and device are out of sync. possible.
Earbuds (Full battery): 1 hrs Single tap the MFB button on L/R earbuds to accept or end call. the earbuds will turn off automatically.
will be automatically turn on and enter into pairing mode. device searching, click for a connection when the device Airflow A: Due to the fact that there might be a decoding time of 10-20
Charging case (Full battery): 2 hrs www.hammeronline.in SCO 4 Sector-25 (T.N),
Reject incoming call: Airflow Plus earbuds Charging: Plus is found. milliseconds. It is a normal phenomenon that the earbuds might 1. To avoid any hearing damage, please moderate the volume and
[email protected] Behind Malik Petrol Pump,
Play Time(with charging case): 23 hrs LED
Charging Contact
Power-off: Tap and hold the MFB button on L/R earbuds for 2 seconds to Put the earbuds back in the case for charging, charging case 4. If it fails to pair, please repeat the operation above. be out of sync sometimes. You may disconnect the earbuds and limit the time when using the earbuds, otherwise, it may cause
+91-9991108081 G.T. Road, Panipat,
Music Play Time @80% volume on single charge: 5 to 6hrs Put the Airflow Plus earbuds back into the charging case, it will reject the call. indicates green light for while charging. 5. When successfully paired with the mobile, turn on the reconnect it. permanent damage or loss of hearing.
Haryana-132103
Call Time @80% volume on single charge: 4 to 5 hrs automatically turn off and enter the charging mode. Bluetooth function on mobile and take out the earbuds from Or use another music player instead. 2. To ensure your safety, please do not use the earbuds or answer a
Play/Pause music: Activate Voice Assistant: the charging case, the earbuds will reconnect to the device, and phone call while driving, riding bicycle or crossing the street.
Standby time: 100 hrs
Type-C Charging Port
TWS pairing: Tap the MFB button on L/R earbuds once to play or pause the Long press the MFB button for 5 seconds to turn on the voice it will disconnect when placed back into the charging case. 3. Keep the distance of earbuds within 10 meters. 3. The sound might be slightly out of sync with the the picture
Charging port: Type-C when watching videos with earbuds on.
1. Double-tap the MFB button on both earbuds at the same time. music. control function. A: The effective straight-line distance of the earbuds is about 5-8
Charging voltage: 5v 2.The pairing time takes only 10s. If it fails to pair with the device 4. When not in use for a prolonged period, please charge the
meters, the maximum reaches to about 9-10 meters. It gives the
within 10 seconds, please repeat the operation. earbuds charging case every month to extend the lifespan of the
This product can accept audio file from any Bluetooth devices like
Caution: Previous track: Earbuds Reset: FAQS optimal effect in 5 meters under the circumstance of zero
product.
1. Do not use Fast Charging adapter to charge your device. In the state of playing music, double tap the MFB of the L earbud. When in off state, Press and hold the earbuds for 10 seconds until obstacles.
Bluetooth mobile phones. Disconnect: 5. The voltage and current of the charger should be less than
Use any 3.7V to 5V Basic adapter. it make a sound and then put them back in charging case. 1. The sound comes out of the mobile phone instead of the Scan this QR code to get your warranty registered. It is mandatory
When connected to Bluetooth DONGLE on PC, it can pay any audio files Tap the phone to cancel pairing, or directly turn off the bluetooth Next track: 5V/1A, if the output voltage and current exceed the specified
USER MANUAL earbuds when answering a phone call or listening to the to register the warranty within 15 days of purchase.
on the computer. 2. Do not charge the product for more than 2-3 hours. of the mobile or turn off the earbuds. In the state of playing music, double tap the MFB of the R earbud. standard, it may cause severe damage to the product and
music.
THANKS FOR PURCHASING