Scribd
Upload
19 views3 pages

TS-253D-4G

The document provides detailed hardware specifications for the TS-253D-4G (Legacy) NAS device, including its Intel Celeron J4125 CPU, memory options, and storage capabilities. It features dual 2.5 Gigabit Ethernet ports, optional PCIe expansion for additional connectivity, and supports various drive types. Additional information includes power consumption, dimensions, and warranty details.

Uploaded by

rfbrs123
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views3 pages

TS-253D-4G

The document provides detailed hardware specifications for the TS-253D-4G (Legacy) NAS device, including its Intel Celeron J4125 CPU, memory options, and storage capabilities. It features dual 2.5 Gigabit Ethernet ports, optional PCIe expansion for additional connectivity, and supports various drive types. Additional information includes power consumption, dimensions, and warranty details.

Uploaded by

rfbrs123
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Hardware Specs

TS-253D-4G (Legacy)
CPU Intel® Celeron® J4125 4-core/4-thread processor, burst up to 2.7 GHz

CPU Architecture 64-bit x86

Graphic Processors Intel® HD Graphics 600

Floating Point Unit Yes

Encryption Engine Yes (AES-NI)

Hardware-accelerated Yes
Transcoding

System Memory 4 GB SODIMM DDR4 (1 x 4 GB)

Maximum Memory 8 GB (2 x 4GB)

Memory Slot 2 x SODIMM DDR4

For dual-DIMM configuration, you must use a pair of identical DDR4 modules.

Flash Memory 4GB (Dual boot OS protection)

Drive Bay 2 x 3.5-inch SATA 6Gb/s, 3Gb/s

The system is shipped without HDD.


For the HDD compatibility list, please visit https://www.qnap.com/compatibility/

Drive Compatibility 3.5-inch SATA hard disk drives


2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives

Hot-swappable Yes

M.2 Slot Optional via a PCIe adapter

SSD Cache Acceleration Yes


Support

2.5 Gigabit Ethernet Port 2 (2.5G/1G/100M/10M)


(2.5G/1G/100M)

5 Gigabit Ethernet Port Optional via PCIe expansion card


(5G/2.5G/1G/100M)
10 Gigabit Ethernet Port Optional via PCIe expansion card

Optional via PCIe expansion card

Wake on LAN (WOL) Yes

Only the 2.5GbE port

Jumbo Frame Yes

PCIe Slot 1
Slot 1: PCIe Gen 2 x4

PCIe bandwidth limitations will restrict the NAS 10GbE performance.


Card dimensions for PCIe slot：190 x 68.9x 18.76 mm / 7.48 x 2.71 x 0.74 inches.

USB 2.0 port 3

USB 3.2 Gen 1 port 2

USB 3.2 Gen 2 (10Gbps) Optional via a PCIe expansion card


Port

IR Sensor Yes (Optional QNAP RM-IR004 remote control)

HDMI™ Output 1, HDMI™ 2.0 (up to 4096 x 2160 @ 60Hz)

Form Factor Tower

LED Indicators Power/Status, LAN, USB, HDD1-2

Buttons Power, USB copy, Reset

Dimensions (HxWxD) 168 × 105 × 226 mm

Weight (Net) 1.55 kg

Weight (Gross) 2.68 kg

Operating Temperature 0 - 40 °C (32°F - 104°F)

Storage Temperature -20 - 70°C (-4°F - 158°F)

Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)

Power Supply Unit 65W adapter (12VDC), 100-240VAC

Power Consumption: Disk 8.198


Standby Mode

Power Consumption: 12.448 W


Operating Mode, Typical
Tested with drives fully populated.

Fan 1 x 70mm, 12VDC

System Warning Buzzer

Kensington Security Slot Yes


Standard Warranty 3

Max. Number of 1500


Concurrent Connections
(CIFS) - with Max. Memory

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory
slot, use QNAP modules with identical specifications and refer to the hardware user manual to install compatible QNAP memory
modules.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier.
Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical
performance to the original.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of
products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.

You might also like