Scribd
Upload
4 views

3.3 MOP Control

The document outlines the process for configuring a conveyor system to be controlled by a BOP (Basic Operator Panel) instead of a digital input. It includes instructions for setting parameters, testing, and optimizing the drive settings. Specific parameters to consider include P0700 and P1000, with guidelines for their implementation and testing provided at different levels of detail.

Uploaded by

Ahmed Saber
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

3.3 MOP Control

The document outlines the process for configuring a conveyor system to be controlled by a BOP (Basic Operator Panel) instead of a digital input. It includes instructions for setting parameters, testing, and optimizing the drive settings. Specific parameters to consider include P0700 and P1000, with guidelines for their implementation and testing provided at different levels of detail.

Uploaded by

Ahmed Saber
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

G110, MM410, 420, 430, 440

3.3 MOP Control


Overview:
The conveyor should be Started and Stopped using BOP control

Aims:
To set the drive to read START/STOP from the BOP
(Rather than the Digital i/p - set in Quick Commissioning)

Narrative:
The BOP may also be used to control the conveyer.

As such, set the BOP to START/STOP the drive, rather than a digital input

Notes:

Instructions:
Follow the exercises given to you, setting the parameters to configure
the drive suitable for use within the system.

1 Description of the requirements.


You decide which parameters to use and their settings,
The settings should be tested and optimised as required.

2 Description of the requirements PLUS the parameters to use.


You determine the correct settings of the given parameters.
The settings should be tested and optimised as required.

3 All parameters and settings are given.


You implement the settings.
The settings should be tested and optimised as required.

Ref: 6SE6400-5BB00-0BP0 (Parameter List)

CS E May 06 3.3 MOP Control.xls


Level 1.

1 Consider the parameters to be used to change to BOP Control


List them in the box provided.

Parameters:

2 What settings would you apply to the parameters.


List them in the box provided.

Settings:

3 Implement the settings.

4 Test the settings.

Modifications/Notes:

CS E May 06 3.3 MOP Control.xls


Level 2.

The parameters that you should consider using are:


P0700; P1000;

1 What settings would you apply to these parameters.


List them in the box provided.

Settings:

P0700 = P1000 =

2 Implement the settings.

3 Test the settings.

Modifications/Notes:

CS E May 06 3.3 MOP Control.xls


Level 3.

The parameters that you should consider using are:

P0700 = 1 P1000 = 1

1 Implement the settings.

2 Test the settings.

Modifications/Notes:

What happens if P0700 = 1 and P1000 = 1 ?


Is this logical?

CS E May 06 3.3 MOP Control.xls

You might also like