Making of Green Hydrogen Gas Generator

:Designed for easy installation and for safe, reliable, unattended operation, we offer
on-site, on-demand industrial gas generators to supply ultrapure hydrogen and
oxygen for a variety of applications

Valve Automation system:

We provide customized, highly engineered flow control solutions for a variety of
applications including water, steam, wastewater, oil, and a number of media.

Manual to Electric operated valve:

We survey the whole application on-site and provide an appropriate solution by
providing the design depending on the flange and other factors. If required we
offer to commission and install.

Emission Monitoring
Engineered as per new CPCP guidelines we engineer Emission Monitoring systems
in all industries.

Pneumatic Panel
We provide complete cabinet, panel, and integrated assembly solutions that
greatly simplify the challenge of designing and engineering your fluid automation
system.

Hydraulic System
Engineered as per project needs our expertise include motor, pump, valves and
electronic intelligence, Our power units are used across the industry for multiple
applications
 ASCO 521 Series Solenoid Valve Specification:
Function: 3/2 Way, 5/2 Way , 5/3 Way
Pipe Size: ¼ “, 3/8” ,Media: Air, Inert Gas
Pressure Range: 2 to 8 Bar
Orifice: 6 mm, Flow : 1020 l /min
Features:
For controlling double-acting and single-acting
actuators, 8-shaped seal technology - Small contact
surface, low Friction and minimize "sticking"

ASCO 531 Series Solenoid Valve

Specification:
Function: 5/2 Way, 3/2 Way Threaded Style & Namur,
Pipe Size: ¼”, Orifice: 6 mm,
Body: Aluminium black anodized,
Seal: NBR, Flow: 1100 L/Min,

ASCO 210 Series 2/2 Solenoid Valve Specification:

Function: 2/2 Solenoid Valve
MOC: Brass / Stainless Steel
Media: Air / Water / Gas
Pipe Size: 3/8 “to 1 ½ “ (Screw End )
Coil Enclosure: Weatherproof / Flame Proof

Specification: ASCO 531 Series Solenoid Valve

Function: 5/2 Way , 3/2 Way Threaded Style & Namur ,Pipe Size: ¼” ,
Orifice : 6 mm , Body: Aluminium black anodized
Seal : NBR , Flow : 1100 L/Min
Coil Enclosure : Weatherproof / Flame Proof

ASCO 327 Series 3/2 Solenoid Valve Specification:

Function: 3/2 Solenoid Valve
Valve Body: Brass / SS 316
Media: Air , Gas ,Water , Oil
Temp Range: -20 to +120 Degree C
Pipe Size: ¼” , Orifice Size : 5.7 mm
Pressure Range: 0 to 10 Bar
Coil Enclosure: Weather Proof / Flame Proof
Features:
 AVENTICS Pneuma c (Formerly known as Bosch Rexroth Pneuma cs Division)

PRA series Cylinder (ISO TRB Series Cylinder ( ISO

15552) 15552)
Working pressure min./max. 1,5 - Ø 32-125 mm - Ports G 1/8
... 10 bar G 1/4 G 3/8 G ½
Ambient temperature - Double-acting - with
min./max. -20 ... 80 °C magnetic piston -
Medium Compressed air

PRA series Cylinder (ISO TRB Series Cylinder ( ISO

15552) 15552)
Working pressure min./max. 1,5 - Ø 32-125 mm - Ports G 1/8
... 10 bar G 1/4 G 3/8 G ½
Ambient temperature - Double-acting - with
min./max. -20 ... 80 °C magnetic piston -
Medium Compressed air

PRA series Cylinder (ISO TRB Series Cylinder ( ISO

15552) 15552)
Working pressure min./max. 1,5 - Ø 32-125 mm - Ports G 1/8
... 10 bar G 1/4 G 3/8 G ½
Ambient temperature - Double-acting - with
min./max. -20 ... 80 °C magnetic piston -
Medium Compressed air

TRB Series Cylinder ( ISO 15552)

- Ø 32-125 mm - Ports G 1/8 G 1/4 G 3/8 G ½
- Double-acting - with magnetic piston - Cushioning
Front cover : Die-cast aluminium
Piston Diameter: 32-125 mm
Max Stroke: 2800 mm
Emerson images including logo - details required

All Logos as mentioned on nal page is required

 Auma Actuator
The TIGRON is a multi-turn actuator with classic
mission: Automation of gate valves with/without
PRA series Cylinder (ISO 15552) PRA series Cylinder (ISO 15552)
rising stem, of globe valves (double block and
Working pressure min./max. 1,5 ... 10 bar Working pressure min./max. 1,5 ... 10 bar
bleed valves) and in combination with part-turn
Ambient temperature min./max. -20 ... 80 °C Ambient temperature min./max. -20 ... 80
gearbox of buttery valves and ball valves.
Medium Compressed air °C
Six gearbox type ranges are part of AUMA's
Piston Diameter: 32-125 mm Medium Compressed air
product portfolio. They are ideally suited to
Max Stroke: 2800 mm Piston Diameter: 32-125 mm
complete and enhance TIGRON's application range
Max Stroke: 2800 mm
even to other valve designs. This includes
numerous buttery valves or the conventional ball
valves of the oil and gas industry requiring a part-
turn movement of mostly 90 degrees. In these
cases, TIGRON is combined with AUMA part-turn
gearboxes

Auma Spur Gearbox

Auma Actuator
If the drive shaft is to be positioned at a certain
SAR multi-turn actuators are rated for modulating duty
(class C) S4 - 25 %. Special versions for S4 - 50 % and angle to the output drive shaft, combinations of
S5 - 25 % are also available.
the SA multi-turn actuators with GST spur
The actuators can be combined with different actuator
controls: From simple OPEN-CLOSE actuator controls gearboxes are used.
to the micro-controlled version with logging of operating The output torque can be considerably
data or eldbus interface. multiplied. Parts and Accessories

D-FL-100 Volume Flow Durag Dust Monitor System DR 808 Hegwein - Oil / Gas Fired Igniters
Measuring System Suitable for process applications and for Oil burner with nozzle mixing device in compact,
emission compliance for plants equipped with modular design for plant-specific solu ons and fuel
For continuous volume ow measurement in dry gases. bag lters, cartridge lters, cyclones, flexibility.
Reliable, even under extreme operating conditions. electrostatic precipitators, or without any Func onality: Compact design, integrated ioniza on
ltration electrode and ioniza on flame monitor, integrated
· Ideal for monitoring non-condensing / igni on electrode and high voltage spark
dry ue gases transformer/high energy igni on unit, integrable
· Monitoring of dust arrestment lter burner control, fuel-specific gas nozzles, op mized
plants fuel/air mixture and effec ve flame stabiliza on at
· Monitoring of ventilation systems the tube p
Durag Flame HMXT SERIES HMXT SERIES
D LX 110 Ultrapure Hydrogen gas generation, Ultrapure Hydrogen gas generation,
Easy, versatile and exible compact ame monitor with designed for continuous operation for designed for continuous operation for

integrated UV, VIS or IR ame sensor for monitoring gas, ow rates up to 11.2 Nm3/hr per ow rates up to 11.2 Nm3/hr per unit.

oil and coal ames. Particularly for applications with unit.

single burner view.

HMXT SERIES
Ultrapure Hydrogen gas generation, designed for
continuous operation for flow rates up to 11.2 Nm3/hr per
unit.

H2OASIS
Self-contained hydrogen plant in prefabricated shelters
that can be situated anywhere that hydrogen
production is required.

EL SERIES
Fully automatic large scale systems for ultrapure
Hydrogen gas generation up to 78 Nm3/hr per unit.
 Hydraulic Pumps
Hydraulic Pumps

Danfoss Power Solutions offers a wide range of hydraulic pumps for mobile and
Danfoss Power Solutions offers a wide range of hydraulic pumps for mobile and
industrial applications including hydrostatic, gear, piston, vane and digital
industrial applications including hydrostatic, gear, piston, vane and digital
displacement pumps.
displacement pumps.

Hydraulic Pumps Hydraulic Pumps

Danfoss Power Solutions offers a wide range of hydraulic pumps for mobile and Hydraulic Power Units
industrial applications including hydrostatic, gear, piston, vane and digital Danfoss hydraulic power units are engineered feature state-of-the-art motors,
displacement pumps. pumps, valves and electronic intelligence, with a wide range of standard and
custom configuration options. Get your application up and running fast with

Hydraulic Pumps Hydraulic Pumps

Danfoss Power Solutions offers a wide range of hydraulic pumps for mobile and Danfoss Power Solutions offers a wide range of hydraulic pumps for
industrial applications including hydrostatic, gear, piston, vane and digital mobile and industrial applications including hydrostatic, gear, piston, vane
displacement pumps. and digital displacement pumps.

Fluid coveyance products

Hoses, fi ngs, Rotary swivel joint,adapters
APCON product images required

All Logos as mentioned on nal page is required