IDEAL Safe Data Sheet
IDEAL Safe Data Sheet
Revision
date: Initial version
Page: 1/8
SECTION 1: Identification
Product identifier: Duct Seal.
Synonyms: None available.
Product Code Number: 31-601, 31-605.
SDS number: ID008
Recommended use: Duct Sealer.
Recommended restrictions: None known.
Manufacturer/Importer/Supplier/Distributor information:
Company Name: IDEAL INDUSTRIES, INC.
Company Address: Becker Place,
Sycamore, IL 60178
Company Telephone: Office hours (Mon – Fri)
7AM - 5 PM (CDT)
(815)895-5181
Company Contact Name: Darryl Docter.
Company Contact Email: [email protected]
Emergency phone number: 24 HOUR EMERGENCY NUMBER:
(815)895-5181.
Physical hazards
Not classified as a physical hazard under GHS criteria
Health hazards
Not classified as a health hazard under GHS criteria
Environmental hazards
Not classified as an environmental hazard under GHS criteria.
Page 1 of 8
Duct Seal
SDS#: ID008
Response:
No response precautionary statements required.
Storage:
No storage precautionary statements required.
Disposal:
No disposal precautionary statements required.
Mixture:
Ingestion: Not likely. If ingested, constipation or blockage may occur. Seek medical
attention.
Page 2 of 8
Duct Seal
SDS#: ID008
Suitable extinguishing media: Use water, foam, carbon dioxide or dry chemical. Nitrogen
oxides and carbon monoxides may be involved.
Special protective equipment and precautions for fire-fighters: For fire involving this
material, do not enter any enclosed or confined fire space without proper protective equipment.
Use self-contained breathing apparatus with full face shield to protect against the hazardous
effects of combustion products and oxygen deficiencies.
Precautions for safe handling: Wash hands thoroughly with soap and water before eating.
Conditions for safe storage, including any incompatibles: Store in a cool, dry place.
Page 3 of 8
Duct Seal
SDS#: ID008
Not applicable
Skin and Hand protection: None normally required. For sensitive individuals, protect skin
from contact. Use cotton gloves if required.
Appearance
Physical state: Solid
Form: Dark gray putty.
Color: Dark gray.
Odor: No odor.
Odor threshold: No data available
pH: No data available
Melting point/freezing point: No data available
Initial boiling point and None
boiling range:
Flash point: 310oC
Evaporation rate: No data available
Flammability (solid, gas): Not applicable
Upper/lower flammability or explosive limits
Flammability limit – lower %): Not applicable
Flammability limit – upper (%): Not applicable
Explosive limit – lower (%): Not applicable
Explosive limit – upper (%): Not applicable
Vapor pressure: No data available
Vapor density: No data available
Relative Density: 1.78
Solubility(ies): Insoluble.
Partition coefficient (n-octanol/water): No data available
Auto-ignition temperature: No data available
Decomposition temperature: No data available
Page 4 of 8
Duct Seal
SDS#: ID008
Delayed and immediate effects and chronic effects from short or long-term exposure:
None known.
Carcinogenicity: No evidence.
Ingredient Information:
EC50 Algae
Disposal instructions:
To the best of our knowledge the product is not considered hazardous based on U.S. EPA
Hazardous Waste Regulations 40 CFR 261. Dispose of in accordance with all local, state and
federal regulations.
USA:
United States Federal Regulations: This SDS complies with the OSHA, 29 CFR
1910.1200. The product is hazardous under OSHA.
Toxic Substances Control Act (TSCA) – All substances in this product are listed, as
required, on the TSCA inventory.
SARA Superfund and Reauthorization Act of 1986 Title III sections 302, 311,312 and
313:
Section 302 – No chemicals in this material are subject to the reporting requirements of
SARA Title III, Section 302.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130):
None listed.
Clean Water Act Section 311 Hazardous Substances (40 CFR 117.3): None listed.
Page 7 of 8
Duct Seal
SDS#: ID008
STATE REGULATIONS:
This SDS contains specific health and safety data is applicable for state requirements. For
details on your regulatory requirements you should contact the appropriate agency in your
state.
Massachusetts Right to Know: This product does not contain any chemicals listed on the
Massachusetts Right to Know List.
Minnesota Hazardous Substance List: This product does not contain any chemicals
listed on the Minnesota Hazardous Substance List.
New Jersey Right to Know: This product does not contain any chemicals listed on the
New Jersey Right to Know list.
Pennsylvania Right to Know: This product does not contain any chemicals is listed on the
Pennsylvania Right to Know List.
To the best of our knowledge, the information contained herein is accurate. However IDEAL
INDUSTRIES INC. does not assume any liability whatsoever for the accuracy or
completeness of the information contained herein. Final determination of suitability of any
material is the sole responsibility of the user. All materials may present unknown hazards and
should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards which exist.
Page 8 of 8