Scribd
Upload
111 views

Retard Guide for Kmbox Net

This document provides detailed instructions for setting up and updating the KMBox Net on a secondary PC, referred to as the 'cheat PC.' It includes steps for installing drivers, disabling IPv6, flashing firmware, and spoofing device IDs. Users are advised to regularly check for updates and ensure proper configurations to avoid issues.

Uploaded by

belen12380lopez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
111 views

Retard Guide for Kmbox Net

This document provides detailed instructions for setting up and updating the KMBox Net on a secondary PC, referred to as the 'cheat PC.' It includes steps for installing drivers, disabling IPv6, flashing firmware, and spoofing device IDs. Users are advised to regularly check for updates and ensure proper configurations to avoid issues.

Uploaded by

belen12380lopez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

/!\ EVERYTHING HAS TO BE DONE ON THE SECOND PC !!! /!

\
SECOND PC = GHOST PC = CHEAT PC = NOT THE ONE YOU PLAY WITH

Please, read everything carefully, we are not responsible for any mishandling.
1. Setting up KMBOX NET :
a) Plug a cable from the top left slot of KMBox into the
cheat PC and then plug another cable from the bottom
left slot of the KMBox into the gaming PC.

b) After successfully plugging in your KMBox Net,


download this driver and extract it (on cheat pc).

c) Inside the extracted folder find "WCHUSBNIC.EXE"


and open it.

d) Inside the driver installer, click the big "INSTALL" button


and it should be successful.

e) Restart the cheat PC

f) On the cheat PC open Control Panel → Network and


Internet → Network and Sharing Centre → Change
adapter settings

g) Find the KMBox Net network adapter, right click and


click properties. It looks like this, if you don't see it try
unplugging and replugging the KMBox Net and seeing
which adapter shows / hides when you do so :

Make sure “Internet Protocol Version 6 (TCP/IPv6)” is DISABLED


Click “Internet Protocol Version 4 (TCP/IPv4)”, make sure it’s
enabled and then click properties, like this:
h) Set the properties to look exactly like this :

11) Click OK and close all control panel windows then load up Blurred and enter in the
information you see on your KMBox Net's screen

/!\ PLEASE, AFTER A PC REBOOT (like the next time you play),
CHECK IF IPV6 IS DISABLED, IF IT IS ITS GOOD, OTHERWISE YOU
NEED TO DISABLE IT EVERYTIME /!\
2. Most important step, flashing the newest FW :
a. Website : https://www.kmbox.top/ (dont forget the www if typing it manually)
b. Downloading files :

c. Download latest firmware :


/!\ PLEASE, ALWAYS CHECK FOR UPDATES LIKE ONCE A WEEK
AND UPDATE AS SOON AS POSSIBLE.
d. How to flash a firmware : (video tutorial)
1. Save all the files downloaded to a single folder (2 : A .zip named
updatatools and a .bin with weird name), then extract the .zip on the
same folder.
2. Example of what it should look like :

3. Now, rename the .bin to a random name like : azd.bin (we need to
delete the chinese letters to prevent bugs with the flashing tool).
4. Then goto the folder with the weird name and open the 01.exe file.
After that, install the driver (just press next everytime)
5. Now we will set the KMBOX NET in update MODE : Watch this
tutorial until 53sec.
6. Now that your KMBOX NET got a white screen and the blue led
blinking, open the 02.exe
7. Set the language to english :
8. Make sure the DevList is on 0 :

9. Now click on “select file” and choose the .bin you renamed before.
Just make sure you are searching for .bin and not .hex (otherwise the
.bin file will not appear).
10. After you selected the file, click on “program” and if you can read
“succeed” like in this pic you updated your KMBOX NET !

11. You finished flashing/updating the firmware of your KMBOX NET.

12. You may have to do steps f-h of the first part after the flashing.

13. FAQ :
a) I don't see 0 in DevList/Flashing is not succeeded : Try
restarting the .exe as admin or disconnect then reconnect your
KMBOX and open the .exe again. Make sure your KMBOX
NET is on update mode like in the video.
b) How to use the kmbox ? Plug your mouse in the “mouse port”
and you should see a mouse logo on the kmbox. If you are
using a controller plug it directly into the pc.
c) How to stay safe : If you use a mouse, check “bypass” is
displayed on the screen, non-bypass mode displays OK). If it
says OK refer to the spoofing guide provided below.

/!\ PLEASE, CHECK IF IPV6 IS DISABLED AND IPV4 SETTED


AFTER FLASHING. /!\
3. Kmbox net spoofing guide (for non-bypass mode and controllers) :
(video tutorial)

1. To spoof the VID/PID of your kmbox net we will use your


main/gaming pc to check the VID/PID of your original mouse
(even on controller). So plug your kmbox as usual.
2. Download the files we need (Winrar required) : Kmbox-net /
USB Log View
3. Getting the VID/PID : run USB Log View on your main pc. And
you should see a similar interface :

4. Unplug your mouse from your computer and then plug it back
in to locate your VID (Vendor ID) and PID (Product ID), even if
you are a controller player, use the VID/PID of your mouse.
Write these down as you’ll need them later. For example :

5. Now on your SECOND PC, Open the kmbox net tool as admin
and enter your kmbox net details (you can find them on the
KMBOX NET’s screen) into the top left section of the tool (IP,
port, and UUID). Check the small ping box and click on the
large button next to it. If a popup appears indicating a
successful ping, you can proceed. If it doesn’t connect, try
restarting the kmbox by unplugging it and plugging it back in.
Enter the VID and PID you saved above into the white VID/PID
text box located in the “Device” section. Click the question
mark button beside it to write the values. A popup will confirm
the spoofing is successful. (You can check the video if you
don't understand everything by text). Here is an example :

6. Open USB Log View again. Unplug and replug your kmbox net
in. It should now display the same VID and PID as your
mouse.

Now your KMBOX is now spoofed to your mouse serials !

Credits : Yaya (@htdf), Clincy (@cincyyy), CaptainDMA, Blurred (+ nox), kmbox.top,


phoenixlab

You might also like