Scribd
Upload
4 views

J177_SetupPlan

The document outlines a setup plan for manufacturing part P1307 using a TruPunch 3000 machine, with a target finish date of December 31, 5000. The job involves a single part made from AlMg3 material, with a total runtime of 58 seconds and a scrap rate of 100%. Manufacturing instructions include specific clamp positions and a designated start point for the process.

Uploaded by

Luis Enrique Sánchez Arce
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

J177_SetupPlan

The document outlines a setup plan for manufacturing part P1307 using a TruPunch 3000 machine, with a target finish date of December 31, 5000. The job involves a single part made from AlMg3 material, with a total runtime of 58 seconds and a scrap rate of 100%. Manufacturing instructions include specific clamp positions and a designated start point for the process.

Uploaded by

Luis Enrique Sánchez Arce
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Setup plan: J177 1/30/2025

Workplace: TruPunch 3000 (S20) Target finish date: 12/31/5000 11:59:00


Total runtime: 00:00:58 [h:min:s] Scrap: PM
100 %
Number of parts: 1 Number of sheets: 1
Job notice: Created by: admin

Tool list
ID no. Type Dimension Dimension Dimension Angle Notice WT MT LT Strokes
1 2 3
33101000 33 1.016 0.000 0.000 0.000 Engra 0.04in 0 1 0 0

Main program PTT ID no. Notice TDC BDC Softpunch


J177_1 PTT-001 33101000 Engra 0.04in 0.000 0.000 0

NC programs
Main program Rpt Production package raw sheet Batch no.: Production Production Duration
Dimensions: package package
weight scrap
J177_1 1 AL0I0090----0960x0480 (AlMg3) 40.4533 lb 99.59 % 00:00:58
96.0000 x 48.0000 x 0.0900 in [h:min:s]

Parts
# Part no.: Geo file: Manufacturing order information Pcs
1 P1307 P1307.geo J177_1 1

Individual part/Order information


Part no.: P1307 Pcs: 1
Part des.: P1307 Part weight: 0.165 lb
Drawing no.: Part processing time: 00:00:01
Geo file: P1307.geo Part processing time dec.: 0.028
Dimensions: 3.7500 x 5.0000 in Surface: 0.130213 ft2
Order no.: OR465
Order ID: Part notice:
Customer:
Version:
Subsequent workplace:

1/2
Manufacturing order information
Manufacturing order information:
J177_1

Main program:
J177_1

Rpt: 1

Material:
AlMg3

Raw material:
AL0I0090-My

Production package raw sheet :


AL0I0090----0960x0480

Dimensions:
96.0000 x 48.0000 x 0.0900 in

Minimum blank:
1.3742 x 0.737 in

Production package weight:


40.4533 lb

Production package scrap:


99.59 %

Duration:
00:00:58 [h:min:s]

# Order no.: Part no.: Geo file: Quantity on Pcs


sheet:
1 OR465 P1307 P1307.geo 1 1

Manufacturing instructions
Clamp positions 5 8 14 23
Stop pin SheetMaster: SMAK05GF V200 <68364-5-180.6.geo>
Start point X = 107.055, Y = 2.441
Notices:
NCP designation:
Setup information:

2/2

You might also like