Testing Methods

1. White Box

Also called ‘Structural Testing / Glass Box Testing’ is used for testing the code keeping the
system specs in mind. Inner working is considered and thus Developers Test..

• Mutation Testing
Number of mutants of the same program created with minor changes and none of
their result should coincide with that of the result of the original program given
same test case.

• Basic Path Testing

Testing is done based on Flow graph notation, uses Cyclometric complexity &
Graph matrices.

• Control Structure Testing

The Flow of control execution path is considered for testing. It does also checks: -
Conditional Testing: Branch Testing, Domain Testing.
Data Flow Testing.
Loop testing: Simple, Nested, Conditional, Unstructured Loops.

2. Gray Box

3. Black Box
Also called ‘Functional Testing’ as it concentrates on testing of the functionality rather than
the internal details of code.
Test cases are designed based on the task descriptions
• Comparison Testing
Test cases results are compared with the results of the test Oracle.

• Graph Based Testing

Cause and effect graphs are generated and cyclometric complexity considered in
using the test cases.

• Boundary Value Testing

Boundary values of the Equivalence classes are considered and tested as they
 generally fail in Equivalence class testing.

• Equivalence class Testing

Test inputs are classified into Equivalence classes such that one input check
validates all the input values in that class.

Gray Box Testing: Similar to Black box but the test cases, risk assessments, and test methods
involved in gray box testing are developed based on the knowledge of the internal data and flow
structures

Structural System Testing Techniques

Compliance Testing:

" To verify that application was developed in accordance to Information Technology

Usage
standards, procedures and guidelines.
" To ensure compliance to methodology
" To ensure to compliance to departmental standards, procedures and guidelines.
Objectives " Help Testing professionals to comply with the methodology.
" Determining system development and maintenance methodologies are followed.
" Determining that application system documentation is complete and reasonable.
" Necessary that the documents / programs prepared for a system is reviewed (peer
How to Use
review).
" Compliance to IT procedures, standards and guidelines depends upon the
management when they desire to make these procedures and standards to be
When to followed.
use " In order to compliance with the standards and procedures the management needs to
find out the degree of compliance to be adhered and then find out who the violators
are.
" Standards followed
Examples
" Documentation complete.

Operational Testing:

Usage " To verify that before application goes to production the operating procedures and
staff can properly execute the application.
 " Evaluation of process and execution of process.
" Determine that System can execute normally during operating the system.
" Determine completeness of documentation of computer operator.
Objectives " Evaluate that operator training is complete.
" Ensure that support mechanism has been prepared and working properly.
" Check that operators can operate the computer system properly.
" Requirements phase - operational requirements are evaluated to find that the
requirements are reasonable and complete.
How to Use
" Design phase - Operating procedures are created and evaluated.
" Operations testing can be carried out " In conjunction " with other tests.
When to use " Should take place before placing application system into production.
" Verifying file labeling and protection functions are working properly.
Examples
" Determine system can run using document.
Levels of Testing

1. Unit Testing.
• Unit the developers themselves primarily carry out Testing.
• Deals functional correctness and the completeness of individual program units.
• White box testing methods are employed
2. Integration Testing.
• Integration Testing: Deals with testing when several program units are integrated.
• Regression Testing: Change of behavior due to modification or addition is called
‘Regression’. Used to bring changes from worst to least.
• Incremental Integration Testing: Checks out for bugs, which encounter when a
module has been integrated to the existing.
• Smoke Testing: It is the battery of test that checks the basic functionality of
program. If fails then the program is not sent for further testing.
3. System Testing.
• System Testing - Deals with testing the whole program system for its intended
purpose.
• Recovery Testing: System is forced to fail and is checked out how well the system
recovers the failure.
• Security Testing: Checks the capability of system to defend itself from hostile
attack on programs and data.
• Load & Stress Testing: The system is tested for max load and extreme stress
points are figured out.
 • Performance Testing: Used to determine the processing speed.
• Installation Testing: Installation & uninstallation is checked out in the target
platform.
4. Acceptance Testing.
• UAT ensures that the project satisfies the customer requirements.
• Alpha Testing: It is the test done by the client at the developer’s site.
• Beta Testing: This is the test done by the end-users at the client’s site.
• Long Term Testing: Checks out for faults occurrence in a long-term usage of the
product.
• Compatibility Testing: Determines how well the product is substantial to product
transition.

What is Software Testing?

Software testing is more than just error detection;

Testing software is operating the software under controlled conditions, to (1) *verify* that it
behaves "as specified"; (2) to *detect* *errors*, and (3) to *validate* that what has been specified
is what the user actually wanted.
1. *Verification* is the checking or testing of items, including software, for conformance and
consistency by evaluating the results against pre-specified requirements. [*V**erification: Are we
building the system right?*]
2. *Error Detection*: Testing should intentionally attempt to make things go wrong to determine if
things happen when they shouldn't or things don't happen when they should.
3. *Validation* looks at the system correctness – i.e. is the process of checking that what has
been specified is what the user actually wanted. [*Validation: Are we building the right system?*]
In other words, validation checks to see if we are building what the customer wants/needs, and
verification checks to see if we are building that system correctly. Both verification and validation
are necessary, but different components of any testing activity.
The definition of testing according to the ANSI/IEEE 1059 standard is that testing is the process of
analyzing a software item to detect the differences between existing and required conditions (that
is defects/errors/bugs) and to evaluate the features of the software item. Remember: The purpose
of testing is verification, validation and error detection in order to find problems – and the purpose
of finding those problems is to get them fixed.
Software Testing

Testing involves operation of a system or application under controlled conditions and evaluating
the results. Every Test consists of 3 steps :
Planning : Inputs to be given, results to be obtained and the process to proceed is to planned.
Execution : preparing test environment, Completing the test, and determining test results.
Evaluation : compare the actual test outcome with what the correct outcome should have been.

Automated Testing
Automated testing is as simple as removing the "human factor" and letting the computer do the
thinking. This can be done with integrated debug tests, to much more intricate processes. The
idea of the these tests is to find bugs that are often very challenging or time intensive for human
testers to find. This sort of testing can save many man hours and can be more "efficient" in some
cases. But it will cost more to ask a developer to write more lines of code into the game (or an
external tool) then it does to pay a tester and there is always the chance there is a bug in the bug
testing program. Reusability is another problem; you may not be able to transfer a testing
program from one title (or platform) to another. And of course, there is always the "human factor"
of testing that can never truly be replaced.

Other successful alternatives or variation: Nothing is infallible. Realistically, a moderate split of

human and automated testing can rule out a wider range of possible bugs, rather than relying
solely on one or the other. Giving the testere limited access to any automated tools can often help
speed up the test cycle.

Release Acceptance Test

The release acceptance test (RAT), also referred to as a build acceptance or smoke test, is run on
each development release to check that each build is stable enough for further testing. Typically,
this test suite consists of entrance and exit test cases plus test cases that check mainstream
functions of the program with mainstream data. Copies of the RAT can be distributed to
developers so that they can run the tests before submitting builds to the testing group. If a build
does not pass a RAT test, it is reasonable to do the following:

• Suspend testing on the new build and resume testing on the prior build until another build
is received.
• Report the failing criteria to the development team.
• Request a new build.

Functional Acceptance Simple Test

The functional acceptance simple test(FAST) is run on each development release to check that
key features of the program are appropriately accessible and functioning properly on the at least
one test configuration (preferable the minimum or common configuration).This test suite consists
of simple test cases that check the lowest level of functionality for each command- to ensure that
task-oriented functional tests(TOFTs) cna be performed on the program. The objective is to
decompose the functionality of a program down to the command level and then apply test cases
to check that each command works as intended. No attention is paid to the combination of these
basic commands, the context of the feature that is formed by these combined commands, or the
end result of the overall feature. For example, FAST for a File/Save As menu command checks
that the Save As dialog box displays. However, it does not validate that the overall file-saving
feature works nor does it validate the integrity of save files.

Deployment Acceptance Test

The configuration on which the Web system will be deployed will often be much different from
develop-and-test configurations. Testing efforts must consider this in the preparation and writing of
test cases for installation time acceptance tests. This type of test usually includes the full
installation of the applications to the targeted environments or configurations.
Structural System Testing Techniques

Stress Testing:

" To determine if the system can function when subject to large volumes.
" It includes testing of
input transactions
Internal tables
Usage Disk Space
Out put
Communication
Computer capacity
Interaction with people.
" To simulate production environment
" Normal or above normal volumes of transactions can be processed through the
transaction within expected time frame.
Objectives
" Application system would be able to process larger volume of data.
" System capacity should have sufficient resources to meet expected turnaround
time.
How to Use " It should simulate as closely as possible to production environment.
" Online system should be stress tested with users entering test data with normal or
above normal pace.
" Batch system should be tested with huge volumes/ numbers of batches
" The test conditions should have error conditions.
" Transactions used in stress testing are obtained from following 3 sources :
 Test data generators
Test transactions created by test group
Transactions which were previously used in production.
" In stress testing the system should run as it would in the production environment.
" When there is uncertainty that system will work with huge volumes of data and
without generating any faults.
When to use " Attempt is made to break system with huge amount of data.
" Most commonly used technique to test for online transaction systems as other
techniques are not effective.
" Sufficient disk space allocated
Examples
" Communication lines are adequate
" Amount of time taken to prepare for testing
Disadvantage
" Amount of resources utilized during test execution.
Execution Testing:

" To determine whether the system achieves the desired level of proficiency in the
production status.
" Used to verify -
Response time
Usage
Turn around time
Design performance.
" Test execution can be done using the simulated system and actual system.
" The system either can be tested as a whole or in parts.
" To determine whether the system can meet the specific performance criteria
" Verify whether system make optimum use of hardware and software.
Objectives
" Determining response time to online use requests
" Determining transaction processing turnaround time.
" Can be performed in any phase of SDLC
" Used to evaluate single aspect of system
" Executed in following manner -
How to Use Using h/w and s/w monitor
Simulation of functioning using simulation model
Creating quick or dirty programs to evaluate approximate performance of completed
system.
" Should be used early in SDLC
When to use " Should be performed when it is known that the results can be used to make
changes to the system structure.
 " Transaction turnaround time adequacy
Examples
" Optimum use of h/w and s/w.

Task-Oriented Functional Test

The task-oriented functional test (TOFT) consists of positive test cases that are designed to verify
program features by checking the task that each feature performs against specifications, user
guides, requirements, and design documents. Usually, features are organized into list or test
matrix format. Each feature is tested for:

• The validity of the task it performs with supported data conditions under supported
operating conditions.
• The integrity od the task's end result
• The feature's integrity when used in conjunction with related features

Forced-Error Test
The forced-error test (FET) consists of negative test cases that are designed to force a program
into error conditions. A list of all error messages thatthe program issues should be generated. The
list is used as a baseline for developing test cases. An attempt is made to generate each error
message in the list. Obviously, test to validate error-handling schemes cannot be performed until
all the handling and error message have been coded. However, FETs should be thought through
as early as possible. Sometimes, the error messages are not available. The error cases can still
be considered by walking through the program and deciding how the program might fail in a given
user interface such as a dialog or in the course of executing a given task or printing a given
report. Test cases should be created for each condition to determine what error message is
generated.
Real-world User-level Test

These tests simulate the actions customers may take with a program. Real-World user-level
testing often detects errors that are otherwise missed by formal test types.

Exploratory Test
Exploratory Tests do not involve a test plan, checklist, or assigned tasks. The strategy here is to
use past testing experience to make educated guesses about places and functionality that may be
problematic. Testing is then focused on those areas. Exploratory testing can be scheduled. It can
also be reserved for unforeseen downtime that presents itself during the testing process.
Compatibility and Configuration Testing
Compatibility and configuration testng is performanced to check that an application functions
properly across various hardware and software environments. Often, the stragegy is to run the
functional acceptance simple tests or a subset of the task-oriented functional tests on a range of
software and hardware configurations. Sometimes, another strategy is to create a specific test
that takes into account the error risks associated with configuration differences. For example, you
might design an extensive series of tests to check for browser compatibility issues. Software
compatibility configurations include variances in OS versions, input/output (I/O) devices,
extension, network software, concurrent applications, online services and firewalls. Hardwere
configurations include variances in manufacturers, CPU types, RAM, graphic display cards, video
capture cards, sound cards, monitors, network cards, and connection types(e.g. T1, DSL, modem,
etc..).

Documentation
Testing of reference guides and user guises check that all features are reasonably documented.
Every page of documentation should be keystroke-tested for the following errors:

• Accuracy of every statement of fact

• Accuracy of every screen shot, figure and illustation
• Accuracy of placement of figures and illustation
• Accuracy of every tutorial, tip, and instruction
• Accuracy of marketing collateral (claims, system requirements,and screen shots)
• Accuracy of downloadable documentation(PDFs, HTML, or test files)

Online Help Test

Online help tests check the accuracy of help contents, correctness of features in the help system,
and functionality of the help system.

Install/uninstall Test
Web system often requires both client-side and server-side installs. Testing of the installer checks
that installed features function properly--including icons, support documentation , the README
file, and registry keys. The test verifies that the correct directories are created and that the correct
system files are copied to the appropriate directories. The test also confirms that various error
conditions are detected and handled gracefully.

Testing of the uninstaller checks that the installed directories and files are appropriately removed,
that configuration and system-related filea are also appropriately removed or modified, and that
the operating environment is recovered in its original state.
User Interface Tests
Easy-of-use UI testing evaluates how intuitive a system is. Issues pertaining to navigation,
usablility, commands, and accessibility are considered. User interface functionality testing
examines how well a UI operates to specifications.

AREAS COVERED IN UI TESTING

• Usability
• Look and feel
• Navigation controls/navigation bar
• Instructional and technical information style
• Images
• Tables
• Navigation branching
• Accessibility

External Beta Testing

External beta testing offers developers their first glimpse at how users may actually interact with a
program. Copies of the program or a test URL, sometimes accompanied with letter of instruction,
are sent out to a group of volunteers who try out the program and respond to questions in the
letter. Beta testing is black-box, real-world testing. Beta testing can be difficult to manage, and the
feedback that it generates normally comes too late in the development process to contribute to
improved usability and functionality. External beta-tester feedback may be reflected in a README
file or deferred to future releases.
Security Tests

Security measures protect Web systems from both internal and external threats. E-commerce
concerns and the growing popularity of Web-based applications have made security testing
increasingly relevant. Security tests determine whether a company's security policies have been
properly implemented; they evaluate the functionality of existing systems, not whether the security
policies that have been implemented are appropriate.
PRIMARY COMPONENTS REQUIRING SECURITY TESTING

• Application software
• Database
• Servers
• Client workstations
• Networks
Unit Tests

Unit tests are positive tests that eveluate the integrity of software code units before they are
integrated with other software units. Developers normally perform unit testing. Unit testing
represents the first round of software testing--when developers test their own software and fix
errors in private.

Click-Stream Testing
Click stream Testing is to show which URLs the user clicked, The Web site's user activity by time
period during the day, and other data otherwise found in the Web server logs. Popular choice for
Click-Stream Testing statisticss include KeyNote Systems Internet weather report , WebTrends
log analysis utility, and the NetMechanic monitoring service.
Disadvantage: Click-Stream Testing statistics reveal almost nothing about the user's ability to
achieve their goals using the Web site. For example, a Web site may show a million page views,
but 35% of the page views may simply e pages with the message "Found no search results," With
Click-Stream Testing, there's no way to tell when user reach their goals.
Click-stream measurement tests

Makes a request for a set of Web pages and records statiestics about the response, including
total page views per hour, total hits per week, total user sessions per week, and derivatives of
these numbers. The downside is that if your Web-enabled application takes twics as many pages
as it should for a user to complete his or her goal, the click stream test makes it look as though
your Web site is popular, while to the user your Web site is frustrating.
HTML content-checking tests

HTML content checking tests makes a request to a Web page, parses the response for HTTP
hyperlinks, requests hyperlinks from their associated host, and if the links returned successful or
exceptional conditions. The downside is that the hyperlinks in a Web-enalbled application are
dynamic and can change, depending on the user's actions. There is little way to know the context
of the hyperlinks in a Web-enabled application. Just checking the links' validity is meaningless if
not misleading. These tests were meant to test static Web sites, not Web-enabled application

Web-Enabled Application Measurement Tests

1. Meantime between failures in seconds

2. Amount of time in seconds for each user session, sometimes know as transaction
3. Application availability and peak usage periods.
4. Which media elements are most used ( for example, HTML vs. Flash, JavaScript vs.
HTML forms, Real vs. Windows Media Player vs. QuickTime)
Ping tests

Ping tests use the Internet Control Message Protocol(ICMP) to send a ping request to a server. If
the ping returns, the server is assumed to be alive and well. The downside is that usually a Web
server will continue to return ping requests even when the Web-enable application has crashed.
Unit Testing

Unit testing finds problems and errors at the module level before the software leaves
development. Unit testing is accomplished by adding a small amount of the code to the module
that validates the module's responses.
FUNCTIONAL SYSTEM TESTING TECHNIQUES

Manual Support Testing Technique :

" It involves testing of all the functions performed by the people while preparing the
Usage
data and using these data from automated system.
" Verify - manual support documents and procedures are correct.
" Determine -
Objectives Manual support responsibility is correct
Manual support people are adequately trained.
Manual support and automated segment are properly interfaced.
" It involves:
Evaluation of adequacy of process
Execution of process
" Process evaluated in all segments of SDLC.
" Execution of the can be done in conjunction with normal system testing.
How to Use
" Instead of preparing, execution and entering actual test transactions the clerical and
supervisory personnel can use the results of processing from application system.
" It involves several iterations of process.
" To test people it requires testing the interface between the people and application
system.
" Verification that manual systems function properly should be conducted throughout
the SDLC.
When to
" Should not be done at later stages of SDLC.
use
" Best done at installation stage so that the clerical people do not get used to the
actual system just before system goes to production.
Examples " Provide input personnel with the type of information they would normally receive
from their customers and then have them transcribe that information and enter it in the
computer.
 " Users can be provided a series of test conditions and then asked to respond to those
conditions. Conducted in this manner, manual support testing is like an examination in
which the users are asked to obtain the answer from the procedures and manuals
available to them.

Intersystem Testing Technique :

" Application systems are frequently interconnected to other application system.

" The interconnection may be data coming from another application system, leaving
Background for another application system or both.
" Frequently multiple systems (applications) sometimes called cycles or functions
are involved.
Usage " To ensure interconnection between application functions correctly.
" Determining -
Proper parameters and data are correctly passed between the applications
Objectives Documentation for involved system is correct and accurate.
" Ensure Proper timing and coordination of functions exists between the application
system.
" Operations of multiple systems are tested.
How to Use " Multiple systems are run from one another to check that they are acceptable and
processed properly.
" When there is change in parameters in application system
" The parameters, which are erroneous then risk associated to such parameters,
When to use would decide the extent of testing and type of testing.
" Intersystem parameters would be checked / verified after the change or new
application is placed in the production.
" Develop test transaction set in one application and passing to another system to
verify the processing.
" Entering test transactions in live production environment and then using integrated
Examples
test facility to check the processing from one system to another.
" Verifying new changes of the parameters in the system, which are being tested,
are corrected in the document.
" Time consuming
Disadvantage
" Cost may be expensive if system is run several times iteratively.

System-Level Test
System-level tests consists of batteris of tests that are designed to fully exercise a program as a
whole and check that all elements of the integrated system function properly.
Functional System Testing

System tests check that the software functions properly from end-to-end. The components of the
system include: A database, Web-enable application software modules, Web servers, Web-
enabled application frameworks deploy Web browser software, TCP/IP networking routers, media
servers to stream audio and video, and messaging services for email.

A common mistake of test professionals is to believe that they are conducting system tests while
they are actually testing a single component of the system. For example, checking that the Web
server returns a page is not a system test if the page contains only a static HTML page.
System testing is the process of testing an integrated hardware and software system to verify that
the system meets its specified requirements. It verifies proper execution of the entire set of
application components including interfaces to other applications. Project teams of developers
and test analysts are responsible for ensuring that this level of testing is performed.
System testing checklist include question about:

• Functional completeness of the system or the add-on module

• Runtime behavior on various operating system or different hardware configurantions.
• Installability and configurability on various systems
• Capacity limitation (maximum file size, number of records, maximum number of concurrent
users, etc.)
• Behavior in response to problems in the programming environment (system crash,
unavailable network, full hard-disk, printer not ready)
• Protection against unauthorized access to data and programs.

"black-box" (or functional) testing

Black Box Testing is testing without knowledge of the internal workings of the item being tested.
The Outside world comes into contact with the test items, --only through the application interface
,,, an internal module interface, or the INPUT/OUTPUT description of a batch process. They
check whether interface definitions are adhered to in all situation and whether the product
conform to all fixed requirements. Test cases are created based on the task descriptions.

Black Box Testing assumes that the tester does not know anything about the application that is
going to be tested. The tester needs to understand what the program should do, and this is
achieved through the business requirements and meeting and talking with users.
Funcional tests: This type of tests will evaluate a specific operating condition using inputs and
validating results. Functional tests are designed to test boundaries. A combination of correst and
incorrect data should be used in this type of test.

Scalability and Performance Testing

Scalability and performance testing is the way to understand how the system will handle the load
cause by many concurrent users. In a Web environment concurrent use is measured as simply
the number of users making requests at the same time.

Performance testing is designed to measure how quickly the program completes a given task.
The primary objective is to determine whether the processing speed is acceptable in all parts of
the program. If explicit requirements specify program performance, then performance test are
often performed as acceptance tests.

As a rule, performance tests are easy to automate. This makes sense above all when you want to
make a performance comparison of different system conditions while using the user interface. The
capture and automatic replay of user actions during testing eliminates variations in response
times.

This type of test should be designed to verify response and execution time. Bottlenecks in a
system are generally found during this stage of testing.

Stress Testing
Overwhelm the product for performance, reliability, and efficiency assessment; To find the
breakpoint when system is failure; to increase load regressively to gather information for finding
out maximum concurrent users.

Stress tests force programs to operate under limited resource conditions. The goal is to push the
upper functional limits of a program to ensure that it can function correctly and handle error
conditions gracefully. Examples of resources that may be artificially manipulated to create
stressful conditions include memory, disk space, and network bandwidth. If other memory-
oriented tests are also planned, they should be performed here as part of the stress test suite.
Stress tests can be automated.

Breakpoint:
The capabilities and weakness of the product:

• High volumes of data

• Device connections
• Long transition chains

Stress Test Environment:

As you set up your testing environment for a stress test, you need to make sure you can answer
the following questions:

• Will my test be able to support all the users and still maintain performance?
• Will my test be able to simulate the number of transactions that pass through in a matter of
hours?
• Will my test be able to uncover whether the system will break?
• Will my server crash if the load continues over and over?

The test should be set up so that you can simulate the load; for example:

• If you have a remote Web site you should be able to monitor up to four Web sites or URLs.
• There should be a way to monitor the load intervals.
• The load test should be able to simulate the SSL (Secure Server)
• The test should be able to simulate when a user submits the Form Data (GET method)
• The test should be set up to simulate and authentical the keyword verification.
• The test should be able to simulate up to six email or pager mail addresses and an
alert should occur when there is a failure.

It is important to remember when stressing your Web site to give a certain number of users a page
to stress test and give them a certain amount of time in which to run the test.

Some of the key data features that can help you measure this type of stress test, determine the
load, and uncover bottlenecks in the system are:

• Amount of memory available and used

• The processor time used
• The number of requests per second
• The amount of time it takes ASP pages to be set up.
• Server timing errors.

Load Testing

The process of modeling application usage conditions and performing them against the
application and system under test, to analyze the application and system and determine capacity,
throughout speed, transition handling capabilities, scalabilities and reliability while under under
stress.
This type of test is designed to identify possible overloads to the system such as too many users
signed on to the system, too many terminals on the network, and network system too slow.
Load testing a simulation of how a browser will respond to intense use by many individuals. The
Web sessions can be recorded live and set up so that the test can be run during peak times and
also during slow times. The following are two different types of load tests:

Single session - A single session should be set up on browser that will have one or multiple
responses. The timeing of the data should be put in a file. After the test, you can set up a separate
file for report analysis.
Multiple session - a multiple session should be developed on multiple browsers with one or
multiple responses. The multivariate statistical methods may be needed for a complex but general
performance model

When performing stress testing, looping transactions back on themselves so that the system
stresses itself simulates stress loads and may be useful for finding synchronization problems and
timing bugs, Web priority problems, memory bugs, and Windows problems using API. For
example, you may want to simulate an incoming message that is then put out on a looped-back
line; this in turn will generate another incoming message. The end user can use another system of
comparable size to create the stress load.

Memory leaks are often found under stress testing. A memory leak occurs when a test leaves
allocated memory behind and does not correctly return the memory to the memory allocation
scheme. The test seems to run correctly, but after several iteration available memory is reduced
until the system fails.

Peak Load and Testing Parameters:

Determining your peak load is important before beginning the assessment of the Web site test. It
may mean more than just using user requests per second to stress the system. There should be a
combination of determinants such as requests per second, processor time, and memory usage.
There is also the consideration of the type of information that is on your Web page from graphics
and code processing, such as scripts, to ASP pages. Then it is important to determine what is fast
and what is slow for your system. The type of connection can be a critical component here, such
as T1 or T3 versus a modem hookup. After you have selected your threshold, you can stress your
system to additional limits.
As a tester you need to set up test parameters to make sure you can log the number of users
coming into and leaving the test. This should be started in a small way and steadily increased.
The test should also begin by selecting a test page that may not have a large amount of graphics
and steadily increasing the complexity of the test by increasing the number of graphics and image
requests. Keep in mind that images will take up additional bandwidth and resources on the server
but do not really have a large impact on the server's processor.
Another important item to remember is that you need to account for the length of time the user will
spend surfing each page. As you test, you should set up a log to determine the approximate time
spend on each page, whether it is 25 or 30 seconds. It may be recorded that each user spends at
least 30 seconds on each page, and that will produce a heightened response for the server. As
the request is queued, and this will be analyzed as the test continues.

FUNCTIONAL SYSTEM TESTING TECHNIQUES

Control Testing Technique:

" One half of total system development effort is directly attributable to controls.
" Controls include:
Data validation
File integrity
Audit trail
Background
Back up and recovery
Documentation.
Other aspects of system related to integrity
" Control is system within a system.
" Control looks at the totality of the system.
" Control is a management tool to ensure that processing is performed in accordance
Usage
to what management desire or intents of management.
" Accurate and complete data
" Authorized transactions
Objectives " Maintenance of adequate audit trail of information.
" Efficient, effective and economical process.
" Process meeting the needs of the user.
" To test controls risks must be identified.
" Develop risk matrix, which identifies the risks, controls; segment within application
How to Use system in which control resides.
" Testers should have negative approach i.e. should determine or anticipate what can
go wrong in the application system.
When to use " Should be tested with other system tests.
" file reconciliation procedures work
Examples
" Manual controls in place.

Parallel Testing Technique:

 " To ensure that the processing of new application (new version) is consistent with
Usage
respect to the processing of previous application version.
" Conducting redundant processing to ensure that the new version or application
Objectives performs correctly.
" Demonstrating consistency and inconsistency between 2 versions of the application.
" Same input data should be run through 2 versions of same application system.
How to Use
" Parallel testing can be done with whole system or part of system (segment).
" When there is uncertainty regarding correctness of processing of new application
When to where the new and old version are similar.
use " In financial applications like banking where there are many similar applications the
processing can be verified for old and new version through parallel testing.
" Operating new and old version of a payroll system to determine that the paychecks
from both systems are reconcilable.
Examples
" Running old version of application to ensure that the functions of old system are
working fine with respect to the problems encountered in the new system.
Error - Handling Testing Technique:

" Pre determination of Error handling features is the basic difference between
Automated and manual systems.
Background
" Manual System: can deal with problems as they occur.
" Automated Systems: Must pre program error handling.
" It determines the ability of applications system to process the incorrect transactions
properly
Usage " Errors encompass all unexpected conditions.
" In some system approx. 50% of programming effort will be devoted to handling
error condition.
" Determine:
" Application system recognizes all expected error conditions.
Objectives " Accountability of processing errors has been assigned and procedures provide a
high probability that errors will be properly corrected.
" During correction process reasonable control is maintained over errors.
How to Use " A group of knowledgeable people is required to anticipate what can go wrong in the
application system.
" It is needed that all the application knowledgeable people assemble to integrate
their knowledge of user area, auditing and error tracking.
" Then logical test error conditions should be created based on this assimilated
information.
 " The error handling testing technique should test -
Error
Processing of error
Control condition
Reentry of condition is proper or not.
" The iterative process should be used where first the errors in the system trapped
should be corrected and then the corrected system should be re-tested to check the
authenticity of application operation and to complete the error handling testing cycle.
" Tester should think negatively to trap errors.
" Testers should determine how the system should fail so that they can test to
determine if the software can properly process the erroneous data.
" Throughout SDLC
" Impact from errors should be identified and should be corrected to reduce the
When to use errors to acceptable level.
" Used to assist in error management process of system development and
maintenance.
" Create a set of erroneous transactions and enter them into the application system
then find out whether the system is able to identify the problems.
Examples
" Using iterative testing enters transactions and trap errors. Correct them. Then enter
transactions with errors, which were not present in the system earlier.
Load/Volume Test

Load/volume tests study how a program handles large amounts of data, excessive calculations,
and excessive processing. These tests do not necessarily have to push or exceed upper
functional limits. Load/volume tests can, and usually must, be automated.
Focus of Load/Volume Tesing

• Pushing through large amounts of data with extreme processing demands.

• Requesting many processes simulateously.
• Repeating tasks over a long period of time

Load/volume tests, which involve extreme conditions, are normally run after the execution of
feature-level tests, which prove that a program functions correctly under normal conditions.
Difference between Load and Strees testing

The idea of stress testing is to find the breaking point in order to find bugs that will make that
break potentially harmful. Load testing is merely testing at the highest transaction arrival rate in
performance testing to see the resource contention, database locks etc..
Web Capacity Testing Load and Stress

The performance of the load or stress test Web site should be monitored with the following in
mind:

• The load test should be able to support all browser

• The load test should be able to support all Web server.
• The tool should be able to simulate up 500 users or playback machines
• The tool should be able to run on WIndows NT, Linux, Solaris, and most Unix variants.
• There should be a way to simulate various users at different connection speeds.
• After the tests are run, you should be able to report the transactions, URL, and number of
users who visited the site.
• The test cases should be asssembled in a like fashion to set up test suites.
• There should be a way to test the different server and port addresses.
• There should be a way to account for the user's cookies.

Performance Test
The primary goal of performance-testing is to develop effective enhancement strategies for
maintaining acceptable system performance. Performance testing is a capacity analysis and
planning process in which measurement data are used to predict when load levels will exhaust
system resources.
The Mock Test

It is a good idea to set up s mock test before you begin your actual test. This is a way to measure
the server's stressd performance. As you progress with your stress testing, you can set up a
measurement of metrics to determine the efficiency of the test.
After the initial test, you can determine the breaking point for the server. It may be a processor
problem or even a memory problem. You need to be able to check your log to determine the
average amount of time that it takes your provessor to perform the test. Running graphics or even
ASP pages can cause processor problems and a limitation every time you run your stress test.
Memory tends to be a problem with the stress test. This may be due to a memary leak or lack of
memory. You need to log and monitor the amount of disk capacity during the stress test. As
mentioned earlier, the bandwidth can account for the slow down of the processing of the Web site
speed. If the test hanges and there is a large waiting period, your processor usage is too low to
handle the a,ount of stress on the system.

Simulate Resources
It is important to be able to run system in a high-stress format so that you can actually simulate
the resources and understand how to handle a specific load. For example, a bank transaction
processing system may be designed to process up to 150 transactions per second, whereas an
operating system may be designed to handle up to 200 separate terminals. The different tests
need to be designed to ensure that the system can process the expected load. This type of testing
usually involves planning a series of tests where the load is gradually increased to reflect the
expected usage pattern. The stress tests can steadily increase the load on the system beyond the
maximum design load until the system fails.

This type of testing has a dual function of testing the system for failure and looking for a
combination of events that occur when a load is placed on the server. Stress testing can then
determine if overloading the system results in loss of data or user sevice to the customers The
use of stress testing is particularly relevant to an ecommerce system with Web database.

Increas Capacity Testing

When you begin your stress testing, you will want to increase your capacity testing to make sure
you are able to handle the increased load of data such as ASP pages and graphics. When you
test the ASP pages, you may want to create a page similar to the original page that will simulate
the same items on the ASP page and have it send the information to a test bed with a process
that completes just a small data output. By doing this, you will have your processor still stressing
the system but not taking up the bandwidth by sending the HTML code along the full path. This
will not stress the entire code but will give you a basis from which to work. Dividing the requests
per second by the total number of user or threads will determine the number of transactions per
second. It will tell you at what point the server will start becoming less efficient at handling the
load. Let's look at an example. Let's say your test with 50 users shows your server can handle 5
requests per seconf, with 100 users it is 10 requests per second, with 200 users it is 15 requests
per second, and eventually with 300 users it is 20 requests per second. Your requests per second
are continually climbing, so it seems that you are obtaining steadily improving performance. Let's
look at the ratios:
05/50 = 0.1
10/100 = 0.1
15/200 = 0.075
20/300 = 0.073
From this example you can see that the performance of the server is becoming less and less
efficient as the load grows. This in itself is not necessarily bad (as long as your pages are still
returning within your target time frame). However, it can be a useful indicator during your
optimization process and does give you some indication of how much leeway you have to handle
expected peaks.
Stateful testing

When you use a Web-enabled application to set a value, does the server respond correctly later
on?

Privilage testing
What happens when the everyday user tries to access a control that is authorized only for
adminstrators?
Speed testing

Is the Web-enabled application taking too long to respond?

Boundary Test

Boundary tests are designed to check a program's response to extreme input values. Extreme
output values are generated by the input values. It is important to check that a program handles
input values and output results correctly at the lower and upper boundaries. Keep in mind that you
can create extreme boundary results from non-extreme input values. It is essential to analyze how
to generate extremes of both types. In addition, sometime you know that there is an intermediate
variable involved in processing. If so, it is useful to determine how to drive that one through the
extremes and special conditions such as zero or overflow condition.
Boundary timeing testing

What happens when your Web-enabled application request times out or takes a really long time to
respond?

Regression testing
Did a new build break an existing function? Repeat testing after changes for managing risk relate
to product enhancement.
A regression test is performed when the tester wishes to see the progress of the testing
processes by performing identical tests before and after a bug has been fixed. A regression test
allows the tester to compare expected test results with the actual results.

Regression testing's primary objective is to ensure that all bug free features stay that way. In
addition, bugs, which have been fixed once, should not turn up again in subsequent program
versions.
Regression testing: After every software modification or before next release, we repeat all test
cases to check if fixed bugs are not show up again and new and existing functions are all working
correctly.

Regression testing is used to confirm that fixed bugs have, in fact, been fixed and that new bugs
have not been introduced in the process, and that features that were proven correctly functional
are intact. Depending on the size of a project, cycles of regression testing may be performing
 once per milestone or once per build. Some bug regression testing may also be performed during
each acceptance test cycle, focusing on only the most important bugs. Regression tests can be
automated.

CONDITIONS DURING WHICH REGRESSION TESTS MAY BE RUN Issu fixing cycle. Once the
development team has fixed issues, a regression test can be run t ovalidate the fixes. Tests are
based on the step-by-step test casess that were originally reported:

• If an issue is confirmeded as fixed, then the issue report status should be changed to
Closed.
• If an issue is confirmed as fixed, but with side effects, then the issue report status should
be changed to Closed. However, a new issue should be filed to report the side effect.
• If an issue is only partially fixed, then the issue report resolution should be changed back
to Unfixed, along with comments outlining the oustanding problems

Open-status regression cycle. Periodic regression tests may be run on all open issue in the issue-
tracking database. During this cycle, issue status is confirmed either the report is reproducible as
is with no modification, the report is reproducible with additional comments or modifications, or
the report is no longer reproducible
Closed-fixed regression cycle. In the final phase of testing, a full-regression test cycle should be
run to confirm the status of all fixed-closed issues.
Feature regression cycle. Each time a new build is cut or is in the final phase of testing depending
on the organizational procedure, a full-regression test cycle should be run to confirm that the
proven correctly functional features are still working as expected.

Database Testing

Items to check when testing a database

What to test Environment toola/technique

Seach results System test environment Black Box and White Box technique

Response time System test environment Sytax Testing/Functional Testing

Data integrity Development environment White Box testing

Data validity Development environment White Box testing

Query reaponse time
The turnaround time for responding to queries in a database must be short; therefor, query
response time is essential for online transactions. The results from this test will help to identify
problems, such as possible bottlenecks in the network, sspecific queries, the database structure,
or the hardware.

Data integrity
Data stored in the database should include such items as the catalog, pricing, shipping tables, tax
tables, order database, and customer information. Testng must verify the integrity of the stored
data. Testing should be done on a regular basis because data changes over time.

Data integrity tests

Data integrity can be tested as follows to ensure that the data is valid and not corrupt:

• Test the creation, modification, and deletion of data in tables as specified in the business
requirement.
• Test to make sure that sets of radio buttons represent a fixed set of values. You should
also check for NULL or EMPTY values.
• Test to make sure that data is save to the database and that each values gets saved fully.
You should watch for the truncation of strings and that numeric values are not rounded off.
• Test to make sure that default values are stored and saved.
• Test the compatibility with old data. You should ensure that all updates do not affect the
data you have on file in your database.

Data validity
The most common data errors are due to incorrect data entry, called data validity errors.

Recovery testing

• The system recovers from faukts and resumes processing within a predefined period of
time.
• The system is fault-tolerant, which means that processing faults do not halt the overall
functioning of the system.
 • Data recovery and restart are correct in case of automatic recovery. If recovery requires
human intervention, the mean time to repair the database is within predefined acceptable
limits.

When testing a SQL server

• If the Web site publishes from inside the SQL Server straight to a Web page, is the data
accurate and of the correct data type?
• If the SQL Server reads from a stored procedure to produce a Web page or if the stored
procedure is changed, does the data on the page change?
• If you are using FrontPage or interDev is the data connection to your pages secure?
• Does the database have scheduled maintenance with a log so testers can set changes or
errors?
• Can the tester check to see how back ups are being handled?
• Is the database secure?

When testing a Access database

• If the database is creating Web pages from the datbase to a URL, is the information
correct and updated? If the pages are not dynamic or Active Server pages, they will not
update automatically.
• If the tables in the database are linked to another database, make sure that all the links
are active and giving reevant information.
• Are the fields such as zip code, phone numbers, dates, currency, and social security
number formateed properly?
• If there are formulas in the database, do they work? How will they take care of updates if
numbers change (for example, updating taxes)?
• Do the forms populate the correct tables?
• Is the database secure?

When test a FoxPro database

• If the database is linked to other database, are the links secure and working?
• If the database publishes to the Internet, is the data correct?
• When data is deployed, is it still accurate?
 • Do the queries give accurate information to the reports?
• If thedatabase performs calculations, are the calculatons accurate?

Other important Database and security feature

• Credite Card Transaction

• Shopping Carts
• Payment Transaction Security

Secure Sockets Layer (SSL)

SSL is leading security protocol on the Internet.
When an SSL session is started, the server sends its publice key to the browser, which the
browser uses to send a randomly generated secret key back to the server to have a secret key
exchange for that session.
SSL is a protocol that is submitted to the WWW consortium (W3C) working group on security for
consideration as a standard security hanhshake that is used to initiate the TCP/IP connection.
This handshake results in the client and server agreeing on the level of security that they will use,
and this will fulfill any authentication requirements for the connection. SSL's role is to encrypt and
decrypt the byte stream of the application protocol being used. This means the all the inofrmation
in both the HTTP request and the HTTP response are fully encrypted, including the URL the client
is requesting, any submitted form contents (such as credit card numbers), anty HTTP access
authorization information (user names and passwords), and all the data returned from the server
to the client.

Transport Layer Security (TLS)

TLS is a majo security standard on the internet. TLS is backward compatible with SSL and use
Triple Data Encryption Standard (DES) encryption.

Structural System Testing Techniques

Recovery Testing:

Usage " Recovery is ability to restart the operation after integrity of application is lost.
" It includes reverting to a point where integrity of system is known , then reprocessing
 up until the point of failure.
" The time taken to recover depends upon :
the number of restart points
volume of application
training and skill of people conducting recovery activities
tools available for recovery
" To ensure operations can be continued after a disaster .
" Recovery testing verifies recovery process and effectiveness of recovery process.
" Adequate back up data is preserved and kept in secure location.
Objectives
" Recovery procedures are documented.
" Recovery personnel have been assigned and trained.
" Recovery tools have been developed and are available.
" Procedures , methods , tools and techniques are assessed to evaluate the
adequacy.
" After system is developed a failure can be introduced in the system and check
How to Use whether the system can recover.
" A simulated disaster is usually performed on one aspect of application system.
" When there are no. Of failures then instead of taking care of all recovery testing
should be carried out for one segment and then another i.e. structured fashion.
" System Analysts
Who uses it " Testing professionals
" management personnel.
" When user says that the continuity of the system is needed inorder for system to
When to
perform or function properly.
use
" User then should estimate the losses, time span to carry out recovery testing.
" Loss of communication , loss of database integrity.
Examples
" Evaluate adequacy of back up data.

Security Testing:

Usage " Security is a protection system that is needed for both securing the confidential
information and for competitive purposes to assure third parties that their data will be
protected.
" Amount of security provided depends upon risks associated with compromise or loss
of information.
" Protecting the confidentiality of the information is designed to protect the resources
of the organization.
 " Used to check the adequacy of protective procedures and countermeasures..
" To identify the defects which are very difficult to identify.
" The failures in security system operation may not be detected , resulting in a loss or
compromise of information without the knowledge of that loss.
" To determine that adequate attention is paid to identify security risks.
Objectives " Determine realistic definition and enforcement of access to the system has been
implemented.
" To determine that sufficient expertise exists to perform adequate security testing.
" Conducting reasonable tests to ensure that the implemented security measures
function properly.
" Involves a wide spectrum of conditions.
" Testing divided into physical and logical security.
" Physical security - deals with penetration by people in order to physically gather
How to Use
information.
" Logical Security - deals with use of computer operations / communications
capabilities to improperly access information.
" Security testing should be used when the information and/or assets protected by the
When to application system are of significant value to the organization.
use " Should be conducted before system goes to operational status.
" Extent of testing should depend upon the security risk.
Examples " Access denied " Procedures in place

Three Waves of Software Development

Type of
Wave Development Style Test style
application

Event-Driven framwork surrounds

individual procedural functions The
Test each function agaist a
1. Desktop common style is to have a hierarchical
written functions specification.
set of menus presenting a set of
commands.

2. Client/Server Structured programming command Test each function against a

organized into hierachical menu lists written functional specification
with each client function having its and test the server for its
own code. The common style is to throughput to server clients.
 combine a common dropdown menu
bar with graphical windows contain
controls.

Visual Integrated development tools

facilitate object-oriented design Capture/record/ playable
patterns. The common style is to watches how an application is
provide multiple paths to used and then provides
3. Web-enabled
accomplishing tasks. (The net effect is reports comparing how the
that you can't just walk through a set playback differed from the
of hierarchical menus and arrive at the original recording.
same test result any more.)

Desktop application development and Test automation

The software was written to provide a friendly interface for information workers: Spreadsheet
jockeys, business people needing written reports, and game players. The full spectrum of desktop
software could pretty well be categorized into spreadsheet, wordprocessor, database, and
entertainment categories since desktop computers were rarely networked to other information
resources. Desktop applications used the keyboard, and then later a mouse, to navigate through
windows and a drop-down menu. Inside a desktop application software package one would find
an event-driven framework surrounding individual procedural functions. The automation focused
on improving the time it took to test a desktop application for functionality. The test utilities link into
desktop applications and try each command as though a user were accessing the menu and
window commands. Most QA technicians testing a desktop application compare the function of all
the menus and windows to a written functional specification document. The variation from the
document to the performance shows the relative health of a desktop application.

Clicent/Server Development and Test automation

The original intent for client/server applications was to separete presentation logic from business
logic. In an ideal system design, the client was reponsible for presenting the user interface,
command elements (drop-down menus, buttons, controls), displayed results information in a set
of windows, charts, and dials. The client connected to a server to process functions and the
server responded with data.

In a client/server environment the protocols are cleanly defined so that all the clients use the
same protocols to communicate with the server.
The client-side frameworks to provide the same functionality of desktop application frameworks
plus most of the needed communication code to issue commands to the server and the code
needed to automatically update a client with new functions received from the server.The server-
side frameworks provide code needed to received and handle requests from multiple clients, and
code to connect to database for data persistence and remote information providers. Additionally,
these framworks need to handle stateful transations and intermittent network connections.
Stateful transactions require multiple steps to accomplish a task.

Client/server applications are normally transactional in nature and usually several interactions with
the user are needed to finish a single request. For example, in a stock trading application the user
begins a transaction by identifying themselves to the server, looking up an order code, and then
submitting a request to the server, and receives and presents the results to the user. The client-
side application normally knows something about the transaction - for example, the client-side
application will normally store the user identification and a session code such as cookie value
across the user's interaction with the server-based application. Users like it better when the client-
side application knows about the transaction because each step in a request can be optimized in
the client application. For example. in the stock trading example the client application could
calculate a stock trade commission locally without having to communication with server.

Client/server application test automation provides the functionality of desktop application test
automation plus these:

• Client/server applications operate in a network environment. The tests need to not only
check for the function of an application, they need to test how the application handles slow
or intermittent network performance.
• Automated test are ideal to determine the number of client applications a server is able to
efficiently handle at any given time.
• The server is usually a middle tier between the client application and several data sources.
Automated tests need to check the server for correct functionality while it communicates
with the data source.

Black-Box testing on Window-based Application

Editable Fields Checking and Validation:

• Valid/invalid characters/strings data in all editable fields

• Valid minimum/maximum/mid range values in fields
• Null strings (or no data ) in required fields
 • Record length (character limit)in text/memo fields
• Cut/copy/paste into/from fields when possible

Not Editable Fields Checking:

• Check for all test/spelling in warnings and error messages/dialogs

• Invoke/check all menu items and their options

Application Usability:

• Appearance an outlook (Placement an alignment of objects on screen)

• User Interface Test (open all menus, check all items)
• Basic functionality checking (File+Open+Save, etc..)
• Right mouse clicking sensitivity
• Resize/min/max/restore app, windows (check min app size)
• Scrollability when applicable (scrollbars, keyboard, autoscrolling)
• Keyboard and mouse navigation, highlighting, dragging, drag/drop
• Print in landscape an portrait modes
• Check F1, What's This , Help menu
• Short-cut and Accelerator keys
• Tab Key order and Navigation in all dialog boxes and menus

Web-Enabled Development and Test automation

Web-Enabled application go further in these areas:

• Web-enabled application are meant to be stateless. HTTP was designed to be stateless.

Each request from a Web-enabled application is meant to be atomic and not rely on any
previouse requests. This has huge advantages for system architecture and datacenter
provisioning. When requests are stateless, then any sserver can respond to the request
and any request handler on any server may service the request.
• Web-enabled application are platform independent. The client application may be written
for Windows, Macintosh, Linux, and any other platform that is capable of implementing the
command protocol and network connection to the server.
• Web-enabled application expect the client application to provide presentation rendering
and simple scripting capabilities. The client application is usually a browser, however, it
 may also be a dedication client application such as a retail cash register, a Windows-
based data analysis tool, ot an electronic address book in your mobile phone.

The missing context in a Web-enabled application test automation means that software
developers and QA technicians must manually script tests for each Web-enalbled application.
Plus, they need to maintain the test scriots as the application changes. Web-enabled application
test automation tools focus on making the scriot writing and maintenance tasks easier. The test
automation tool offer these features:

• A friendly, graphical user interface to integrate the record, edit, and run-time script
functions.
• A recorder that watches how an application is used and writes a test script for you.
• A playback utility that drives a Web-enalbed application by processing the test script and
logging. The playback utility also provides the facility to play back several concurrently
running copies of the same script to check the system for scalability and load testing.
• A report utility to show how the playback differed from the original recording. The
differences may be slower or faster performance times, errors, and incomplete
transactions.

Testing Web Sites Applications

Many developers and testers are making the transition from testing traditional client/server, PC,
and/or mainframe systems, to testing rapidly changing Web applications.
Web test: This testing forcuses on how well all parts of the web site hold together, whether inside
and outside the website are working and whether all parts of the website are connected.
Web sites Server consist of three back-end layer:

• Web server
• Application server
• Data layers

FUNCTIONAL SYSTEM TESTING TECHNIQUES

Requirements Testing Technique :

 " To ensure that system performs correctly
" To ensure that correctness can be sustained for a considerable period of time.
Usage
" System can be tested for correctness through all phases of SDLC but incase of
reliability the programs should be in place to make system operational.
" Successfully implementation of user requirements
" Correctness maintained over considerable period of time
" Processing of the application complies with the organization's policies and
procedures.
" Secondary users needs are fulfilled -
Objectives
Security officer
DBA
Internal auditors
Record retention
Comptroller
" Test conditions created
These test conditions are generalized ones, which becomes test cases as the SDLC
progresses until system is fully operational.
Test conditions are more effective when created from user's requirements.
Test conditions if created from documents then if there are any error in the documents
How to Use
those will get incorporated in Test conditions and testing would not be able to find
those errors.
Test conditions if created from other sources (other than documents) error trapping is
effective.
" Functional Checklist created.
" Every application should be Requirement tested
When to " Should start at Requirements phase and should progress till operations and
use maintenance phase.
" The method used to carry requirement testing and the extent of it is important.
" Creating test matrix to prove that system requirements as documented are the
requirements desired by the user.
Examples
" Creating checklist to verify that application complies to the organizational policies
and procedures.

Regression Testing Technique, :

Background " One segment of system is developed and thoroughly tested.

" Another segment is changed which has disastrous effect on the tested segment.
 " The implemented change, new data or parameters have created change in the
already tested segment.
" All aspects of system remain functional after testing.
Usage
" Change in one segment does not change the functionality of other segment.
" Determine -
system documents remain current
Objectives System test data and test conditions remain current.
Previously tested system functions properly without getting effected though
changes are made in some other segment of application system.
" Test cases, which were used previously for the already tested segment is, re-run
to ensure that the results of the segment tested currently and the results of same
segment tested earlier are same.
How to Use " Test automation is needed to carry out the test transactions (test condition
execution) else the process is very time consuming and tedious.
" In this case of testing cost/benefit should be carefully evaluated else the efforts
spend on testing would be more and payback would be minimum.
" When there is high risk that the new changes may effect the unchanged areas of
application system.
" In development process: Regression testing should be carried out after the pre-
When to use
determined changes are incorporated in the application system.
" In Maintenance phase : regression testing should be carried out if there is a high
risk that loss may occur when the changes are made to the system
" Re-running of previously conducted tests to ensure that the unchanged portion of
system functions properly.
" Reviewing previously prepared system documents (manuals) to ensure that they
Examples
do not get effected after changes are made to the application system.
" Obtaining printout of data dictionary to ensure that the data elements reflect the
changes being incorporated.
Disadvantage " Time consuming and tedious if test automation not done.

Black Box testing for web-based application: (1)

1. Browser functionality:

• Is the browser compatible with the application design?

• There are many different types of browsers available.
 GUI design components

• Are the scroll bars, buttons, and frames compatible with the browser and functional?
• To check the functionality of the scroll bars on the interface of the Web page to make sure
the the user can scroll through items and make the correct selection from a list of items.
• The button on the interface need to be functional and the correct hyperlink should go to
the correct page.
• If frames are used on the interface, they should be checked for the correct size and
whether all of the components fit within the viewing screen of the monitor.

2. User Interface
One of the reasons the web browser is being used as the front end to applications is the ease of
use. Users who have been on the web before will probably know how to navigate a well-built web
site. While you are concentrating on this portion of testing it is important to verify that the
application is easy to use. Many will believe that this is the least important area to test, but if you
want to be successful, the site better be easy to use.

3.Instructions
You want to make sure there are instructions. Even if you think the web site is simple, there will
always be someone who needs some clarification. Additionally, you need to test the
documentation to verify that the instructions are correct. If you follow each instruction does the
expected result occur?

4. Site map or navigational bar

Does the site have a map? Sometimes power users know exactly where they want to go and don't
want to wade through lengthy introductions. Or new users get lost easily. Either way a site map
and/or an ever-present navigational bar can help guide the user. You need to verify that the site
map is correct. Does each link on the map actually exist? Are there links on the site that are not
represented on the map? Is the navigational bar present on every screen? Is it consistent? Does
each link work on each page? Is it organized in an intuitive manner?

5. Content
To a developer, functionality comes before wording. Anyone can slap together some fancy mission
statement later, but while they are developing, they just need some filler to verify alignment and
layout. Unfortunately, text produced like this may sneak through the cracks. It is important to
check with the public relations department on the exact wording of the content.
You also want to make sure the site looks professional. Overuse of bold text, big fonts and
blinking (ugh) can turn away a customer quickly. It might be a good idea to consult a graphic
designer to look over the site during User Acceptance Testing. You wouldn't slap together a
brochure with bold text everywhere, so you want to handle the web site with the same level of
professionalism.
Finally, you want to make sure that any time a web reference is given that it is hyperlinked. Plenty
of sites ask you to email them at a specific address or to download a browser from an address.
But if the user can't click on it, they are going to be annoyed.

6. Colors/backgrounds
Ever since the web became popular, everyone thinks they are graphic designers. Unfortunately,
some developers are more interested in their new backgrounds, than ease of use. Sites will have
yellow text on a purple picture of a fractal pattern. (If you've never seen this, try most sites at
GeoCities or AOL.) This may seem "pretty neat", but it's not easy to use.
Usually, the best idea is to use little or no background. If you have a background, it might be a
single color on the left side of the page, containing the navigational bar. But, patterns and pictures
distract the user.

Black Box testing for web-based application: (2)

7. Images
Whether it's a screen grab or a little icon that points the way, a picture is worth a thousand words.
Sometimes, the best way to tell the user something is to simply show them. However, bandwidth
is precious to the client and the server, so you need to conserve memory usage. Do all the
images add value to each page, or do they simply waste bandwidth? Can a different file type
(.GIF, .JPG) be used for 30k less?
In general, you don't want large pictures on the front page, since most users who abandon a page
due to a large load will do it on the front page. If you can get them to see the front page quickly, it
will increase the chance they will stay.

8. Tables
You also want to verify that tables are setup properly. Does the user constantly have to scroll right
to see the price of the item? Would it be more effective to put the price closer to the left and put
miniscule details to the right? Are the columns wide enough or does every row have to wrap
around? Are certain columns considerably longer than others?

9. Wrap-around
Finally, you will want to verify that wrap-around occurs properly. If the text refers to "a picture on
the right", make sure the picture is on the right. Make sure that widowed and orphaned sentences
and paragraphs don't layout in an awkward manner because of pictures.

10. Functionality
The functionality of the web site is why your company hired a developer and not just an artist. This
is the part that interfaces with the server and actually "does stuff".

11. Links
A link is the vehicle that gets the user from page to page. You will need to verify two things for
each link: that the link brings you to the page it said it would and that the pages you are linking to
actually exists. It may sound a little silly but I have seen plenty of web sites with internal broken
links.

12. Forms
When a user submits information through a form it needs to work properly. The submit button
needs to work. If the form is for an online registration, the user should be given login information
(that works) after successful completion. If the form gathers shipping information, it should be
handled properly and the customer should receive their package. In order to test this, you need to
verify that the server stores the information properly and that systems down the line can interpret
and use that information.

13. Data verification

If the system verifies user input according to business rules, then that needs to work properly. For
example, a State field may be checked against a list of valid values. If this is the case, you need
to verify that the list is complete and that the program actually calls the list properly (add a bogus
value to the list and make sure the system accepts it).
14. Cookies
Most users only like the kind with sugar, but developers love web cookies. If the system uses
them, you need to check them. If they store login information, make sure the cookies work. If the
cookie is used for statistics, verify that totals are being counted properly. And you'll probably want
to make sure those cookies are encrypted too, otherwise people can edit their cookies and skew
your statistics.
Application specific functional requirements Most importantly, you want to verify the application
specific functional requirements. Try to perform all functions a user would: place an order, change
an order, cancel an order, check the status of the order, change shipping information before an
order is shipped, pay online, ad naseum.
This is why your users will show up on your doorstep, so you need to make sure you can do what
you advertise.

Black Box testing for web-based application: (3)

16. Interface Testing

Many times, a web site is not an island. The site will call external servers for additional data,
verification of data or fulfillment of orders.

16. Server interface

The first interface you should test is the interface between the browser and the server. You should
attempt transactions, then view the server logs and verify that what you're seeing in the browser is
actually happening on the server. It's also a good idea to run queries on the database to make
sure the transaction data is being stored properly.

17. External interfaces

Some web systems have external interfaces. For example, a merchant might verify credit card
transactions real-time in order to reduce fraud. You will need to send several test transactions
using the web interface. Try credit cards that are valid, invalid, and stolen. If the merchant only
takes Visa and MasterCard, try using a Discover card. (A script can check the first digit of the
credit card number: 3 for American Express, 4 for Visa, 5 for MasterCard, or 6 for Discover, before
the transaction is sent.) Basically, you want to make sure that the software can handle every
possible message returned by the external server.
18. Error handling
One of the areas left untested most often is interface error handling. Usually we try to make sure
our system can handle all of our errors, but we never plan for the other systems' errors or for the
unexpected. Try leaving the site mid-transaction - what happens? Does the order complete
anyway? Try losing the internet connection from the user to the server. Try losing the connection
from the server to the credit card verification server. Is there proper error handling for all these
situations? Are charges still made to credit cards? Is the interruption is not user initiated, does the
order get stored so customer service reps can call back if the user doesn't come back to the site?

19. Compatibility
You will also want to verify that the application can work on the machines your customers will be
using. If the product is going to the web for the world to use, you will need to try different
combinations of operating system, browser, video setting and modem speed.

20. Operating systems

Does the site work for both MAC and IBM-Compatibles? Some fonts are not available on both
systems, so make sure that secondary fonts are selected. Make sure that the site doesn't use
plug-ins only available for one OS, if your users will use both.

21. Browsers
Does your site work with Netscape? Internet Explorer? Lynx? Some HTML commands or scripts
only work for certain browsers. Make sure there are alternate tags for images, in case someone is
using a text browser. If you're using SSL security, you only need to check browsers 3.0 and
higher, but verify that there is a message for those using older browsers.

22. Video settings

Does the layout still look good on 640x400 or 600x800? Are fonts too small to read? Are they too
big? Does all the text and graphic alignment still work?

23. Modem/connection speeds

Does it take 10 minutes to load a page with a 28.8 modem, but you tested hooked up to a T1?
Users will expect long download times when they are grabbing documents or demos, but not on
the front page. Make sure that the images aren't too large. Make sure that marketing didn't put
50k of font size -6 keywords for search engines.
Black Box testing for web-based application: (4)

23. Printers
Users like to print. The concept behind the web should save paper and reduce printing, but most
people would rather read on paper than on the screen. So, you need to verify that the pages print
properly. Sometimes images and text align on the screen differently than on the printed page. You
need to at least verify that order confirmation screens can be printed properly.

24. Combinations
Now you get to try combinations. Maybe 600x800 looks good on the MAC but not on the IBM.
Maybe IBM with Netscape works, but not with Lynx.
If the web site will be used internally it might make testing a little easier. If the company has an
official web browser choice, then you just need to verify that it works for that browser. If everyone
has a T1 connection, then you might not need to check load times. (But keep in mind, some
people may dial in from home.) With internal applications, the development team can make
disclaimers about system requirements and only support those systems setups. But, ideally, the
site should work on all machines so you don't limit growth and changes in the future.

25. Load/Stress
You will need to verify that the system can handle a large number of users at the same time, a
large amount of data from each user, and a long period of continuous use. Accessibility is
extremely important to users. If they get a "busy signal", they hang up and call the competition.
Not only must the system be checked so your customers can gain access, but many times
crackers will attempt to gain access to a system by overloading it. For the sake of security, your
system needs to know what to do when it's overloaded and not simply blow up.
Many users at the same time
If the site just put up the results of a national lottery, it better be able to handle millions of users
right after the winning numbers are posted. A load test tool would be able to simulate large
number of users accessing the site at the same time.
Large amount of data from each user
Most customers may only order 1-5 books from your new online bookstore, but what if a university
bookstore decides to order 5000 different books? Or what if grandma wants to send a gift to each
of her 50 grandchildren for Christmas (separate mailing addresses for each, of course.) Can your
system handle large amounts of data from a single user?
Long period of continuous use
If the site is intended to take orders for flower deliveries, then it better be able to handle the week
before Mother's Day. If the site offers web-based email, it better be able to run for months or even
years, without downtimes.
You will probably want to use an automated test tool to implement these types of tests, since they
are difficult to do manually. Imagine coordinating 100 people to hit the site at the same time. Now
try 100,000 people. Generally, the tool will pay for itself the second or third time you use it. Once
the tool is set up, running another test is just a click away.

26. Security
Even if you aren't accepting credit card payments, security is very important. The web site will be
the only exposure some customers have to your company. And, if that exposure is a hacked page,
they won't feel safe doing business with you.

Black Box testing for web-based application: (5)

27. Directory setup

The most elementary step of web security is proper setup of directories. Each directory should
have an index.html or main.html page so a directory listing doesn't appear.
One company I was consulting for didn't observe this principal. I right clicked on an image and
found the path "...com/objects/images". I went to that directory manually and found a complete
listing of the images on that site. That wasn't too important. Next, I went to the directory below
that: "...com/objects" and I hit the jackpot. There were plenty of goodies, but what caught my eye
were the historical pages. They had changed their prices every month and kept the old pages. I
browsed around and could figure out their profit margin and how low they were willing to go on a
contract. If a potential customer did a little browsing first, they would have had a definite
advantage at the bargaining table.
SSL Many sites use SSL for secure transactions. You know you entered an SSL site because
there will be a browser warning and the HTTP in the location field on the browser will change to
HTTPS. If your development group uses SSL you need to make sure there is an alternate page
for browser with versions less than 3.0, since SSL is not compatible with those browsers. You also
need to make sure that there are warnings when you enter and leave the secured site. Is there a
timeout limit? What happens if the user tries a transaction after the timeout?
28 Logins
In order to validate users, several sites require customers to login. This makes it easier for the
customer since they don't have to re-enter personal information every time. You need to verify that
the system does not allow invalid usernames/password and that it does allow valid logins. Is there
a maximum number of failed logins allowed before the server locks out the current user? Is the
lockout based on IP? What if the maximum failed login attempts is three, and you try three, but
then enter a valid login? What are the rules for password selection?

29. Log files

Behind the scenes, you will need to verify that server logs are working properly. Does the log track
every transaction? Does it track unsuccessful login attempts? Does it only track stolen credit card
usage? What does it store for each transaction? IP address? User name?

30. Scripting languages

Scripting languages are a constant source of security holes. The details are different for each
language. Some exploits allow access to the root directory. Others allow access to the mail
server. Find out what scripting languages are being used and research the loopholes. It might also
be a good idea to subscribe to a security newsgroup that discusses the language you will be
testing.

31. Web Server Testing Features

• Feature: Definition
• Transactions: The nunber of times the test script requested the current URL
• Elapsed time: The number of seconds it took to run the request
• Bytes transferred: The total number of bytes sent or received, less HTTP headers
• Response time: The average time it took for the server to respond to each individual
request.
• Transaction rate: The average number of transactions the server was able to handle per
second.
• Transferance: The average number of bytes transferred per second.
• Concurrency: The average number of simultaneous connections the server was able to
handle during the test session.
• Status code nnn: This indicates how many times a particular HTTP status code was seen.