Information Brochure

(Semester I, 2025-2026)
for Admission to
Ph.D., M.Tech., M.S.(R), M.Des., M.P.P., M.A. and M.Sc.

Information Brochure 2025

INDIAN INSTITUTE OF TECHNOLOGY DELHI
HAUZ KHAS, NEW DELHI-110016, INDIA

IIT DELHI

INDIAN INSTITUTE OF TECHNOLOGY DELHI

www.iitd.ac.in

*For M.Sc. (Cognative Science) and some seats of M.Sc. (Economics) Admission to other M.Sc. Programme is on the basis of JAM
Contents
1. MESSAGE TO THE APPLICANTS FROM THE DEAN, ACADEMICS 1
2. IMPORTANT DATES 4
3. INTRODUCTION 5
4. CREDIT SYSTEM 7
5. ADMISSION PROCEDURES AND REQUIREMENTS 8 - 25
I. Ph.D. Programmes 8
II. M.Tech. / M.S. (Research) Programmes 13
III. Master of Design in Industrial Design 17
IV. M.Sc. in Economics and M.Sc. in Cognitive Science 19
V. Master of Public Policy (MPP) 21
VI. M.A. in Culture, Society, Thought 23
6. RESERVATION OF SEATS (Where GoI Rules Apply) 26
7. GENERAL GUIDELINES 27
8. APPLICATION PROCEDURE 28
9. IMPORTANT INSTRUCTIONS FOR FILLING APPLICATION FORM 28
10. HOSTEL ACCOMMODATION 29
11. REGISTRATION FOR COURSES 29
12. FEES AND PAYMENTS 30-31
I. Institute dues payable by new students of Ph.D./M.Tech./M.S.(R)/M.Des./MPP/M.Sc./M.A. 30
II. Hostel Charges Payable by 2025 entry students 31
13. FINANCIAL ASSISTANCE AND OTHER SUPPORT 32
14. REFUND OF FEES 36
15. CONTACT TELEPHONE/FAX NUMBERS 37
16. ANNEXURES 39-69
I. A-I: Research Programmes: Doctor of Philosophy (Ph.D.) 39
II. A-II: M.TECH., M.S.(Research), M.DES., MPP, M.SC. AND M.A. PROGRAMMES OFFERED 57
III. A-III: Options for M.Tech., M.S. (Research) & M. Des. Programmes according 61
to the discipline in which the candidate holds the Qualifying Degree
IV. A-IV: GATE Score cut-off for admission to non-sponsored full-time M.Tech. 67
Programmes in the previous Academic Year
V. A-V: Syllabus for M.Sc. Economics Admission Test 70
17. ADDITIONAL IMPORTANT INFORMATION FOR CANDIDATES 72
 Pa ge |1

MESSAGE TO THE APPLICANTS FROM THE DEAN, ACADEMICS

I am very happy to note that you are planning to pursue your postgraduate education, and in
particular you are considering IIT Delhi as one of your choices. Your decision to pursue post-
graduate education would definitely have a significant impact on your long-term career
prospects. IIT Delhi with its 31 Ph.D., 40 M.Tech., 19 M.S.(R), 6 M.Sc., 3 M.B.A., 1 MPP, 1 M.A.
and 1 M.Des. Programmes, offers you extensive choices of specializations. The strength of the
Institute is its 600+ highly qualified faculty, due to which it is continuously ranked among the top
technical institutions globally. You may wish to note that IIT Delhi has a larger number of students
in post-graduate programmes than in undergraduate programmes. We urge you to consider us
as your institution of choice to further your goals of getting a higher professional degree.
As you may be aware, IIT Delhi is recognized as an Institution of Eminence (IoE) by the
Government of India. While this is a great recognition, it is also a great responsibility on all of us
and indeed our prospective PG students, to take this Institution to even greater heights. We
would like you to consider joining us in this journey.
In the last few years, we have constantly been working towards making our rules, regulations,
and policies governing post-graduate education flexible and attractive to potential candidates. I
am writing this letter to make you aware of some major policy changes in the last couple of years.
1. At IIT Delhi, most of the academic Departments/ Centres/ Schools offer M. Tech. and
Ph.D. programmes, while some of them also offer an M.S.(R) programme. It is possible for
a student to switch from one programme to another any time after one semester of
joining. For example, a candidate joining an M. Tech. programme can apply for the switch
to a Ph. D. programme in the same Department (or even in another eligible Department),
after completing 12 credits of courses with a minimum CGPA of 8.0. All his/her earned
credits, if relevant to the new programme, can be considered in the new programme as
well. Similar flexibility exists for switching between other programmes.
2. In the last year, IIT Delhi has initiated sponsored research activities worth around Rs. 350
crores which are expected to grow further this year. Candidates wanting to gain project
experience along with post-graduate education can apply and join one of the sponsored
projects simultaneously with admission to the post-graduate degree. Apart from gaining
experience, various schemes may provide for higher assistantship amounts with your
participation in the sponsored research projects. One significant policy change that has
been adopted is that the recruitment for the project can also be carried out by the same
Department/ Center/ School Research Committee (DRC/CRC/SRC) that admits students
to the postgraduate programmes.
3. IIT Delhi is striving towards ensuring that each of its Ph.D. students has an opportunity to
present a paper and attend at least one international conference before they graduate.
We offer a certain quantum of financial support to all full-time research scholars to
present their research at international conferences.
4. We have also introduced a new scheme under which highly meritorious research scholars

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 Pa ge |2

are awarded a further opportunity for presenting their work at another conference,
provided they have demonstrated sustained excellence in their research.
5. Our post-graduate programmes are highly flexible, which offer students a variety of
courses and research topics to choose from.
6. Meritorious students with a bachelor’s degree (such as B. Tech.) are advised to directly
apply for the Ph. D. programmes if they wish to pursue doctoral research. Details about
direct admission to Ph. D. for B. Tech- qualified students are available in this brochure and
also on our website. Of course, students who already hold a Master’s degree are welcome
to apply for Ph.D.
7. IIT Delhi is actively promoting post-graduate research in inter-disciplinary areas, and you
are invited to avail of this exciting opportunity. In addition to such research being pursued
in our regular Academic Units, we also have a School of Interdisciplinary Research (SIRe)
wherein candidates with a diversity of backgrounds seek admission to pursue a Ph.D.
degree involving faculty supervisors in different Academic Units and expertise, jointly
supervising the student. Please look for more details on inter-disciplinary research on our
website.
8. IIT Delhi, as a part of its Institution of Eminence (IoE) initiatives, is moving rapidly to
welcome meritorious candidates for pursuing Ph.D. from other countries. As part of this,
International students wanting to pursue PhD degree at IIT Delhi (who are not availing a
scholarship from any other source) are entitled to a merit-based fellowship under the
International PhD Fellowship Programme (IPFP). More information on this scheme and
other details for international students are available at: http://intladm.iitd.ac.in
9. IIT Delhi has also a scholarship scheme for international students wishing to pursue
M.Tech. / M. Des. / MS(R), under the newly launched “International Masters Scholarship
Programme (IMSP)”. Under this scheme, international students wishing to pursue either
of M. Tech., M. Des., or MS(R) degrees in IIT Delhi, and secure an admission offer from
the respective Department or Centre or School within IIT Delhi, are entitled to be
considered for a limited number of merit-based scholarships. Those international
students who have successfully cleared the Graduate Aptitude Test in Engineering (GATE
examination: http://gate.iitd.ac.in/) are also entitled to a scholarship for pursuing their
masters degree in IIT Delhi. More details of on the IMSP scheme are available at:
http://intladm.iitd.ac.in
10. IIT Delhi is an active participant in two flagship MoE schemes: the Prime Minister’s
Research Fellowship (https://pmrf.in/) and the Scheme for students in ASEAN countries
to pursue PhD in IITs (http://asean.iitd.ac.in/). The latter scheme entitles students from
ASEAN countries (https://asean.org/asean/asean-member-states/) to pursue PhD with a
full scholarship at any of the IITs, including IIT Delhi. Potential PhD candidates from the
ASEAN member countries interested in pursuing their PhD degree in IIT Delhi are strongly

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 Pa ge |3

encouraged to avail this facility.

11. Under the PMRF scheme (https://pmrf.in/), Indian students of high merit who have
completed their bachelors degree, or pursuing their masters or PhD degrees in top Indian
institutions may be considered for a merit-based premier scholarship. Potential
candidates are encouraged to apply under this scheme and seek details at the website.
12. IIT Delhi is also an active participant in the Prime Minister's Fellowship for Doctoral
Research, which is a joint venture between SERB and CII / FICCI for supporting industry-
sponsored PhD projects. Research scholars who get engaged in industry-sponsored
projects are advised to apply for this scheme.
13. At IIT Delhi, we are engaged in two Joint Ph.D. programmes, one with University of
Queensland, Australia (www.uqidar.org), and other with National Yang Ming Chiao Tung
University, Taiwan www.ncyu.edu.tw). While for the UQ-IITD programme, the admission
is through a separate channel (details on the website www.uqidar.org), for NYCU the
entrance is after the selection of students into the regular IITD Ph.D. programme..
I look forward to seeing you in the Orientation Programme as a student in one of your preferred
postgraduate programmes.
With best wishes,

Prof. Narayanan D. Kurur

Dean, Academics

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 Pa ge |4

IMPORTANT DATES

Submission of Online Application Commences on March 22, 2025

(12:00 noon)

Last Date for Submission of Online Application and April 07, 2025
Application Fee (04:00 pm)

Conduct of written Tests / Interviews May 14 – June 16, 2025

Orientation for New PG Students July 19, 2025

Registration for New PG Students July 19 – July 20, 2025

Commencement of Classes July 24, 2025

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 Pa ge |5

INTRODUCTION

Indian Institute of Technology Delhi is one of the seven older established Institutes of Technology
in India, the others being Kharagpur, Bombay, Madras, Kanpur, Guwahati, and Roorkee. Recently,
Government has set up sixteen more Institutes of Technology. These Institutes have been created
as centres of excellence for higher training, research and development in science, engineering,
and technology. Established as a College of Engineering in 1961, the Institute in Delhi was declared
an Institute of National Importance under the “Institutes of Technology (Amendment) Act, 1963”
and renamed “Indian Institute of Technology Delhi”. It was then accorded the status of a
University with powers to decide its own academic policy, to conduct its own examinations, and
to award its own degrees.
Recently, IIT Delhi has been accorded the status of “Institute of Eminence” by Government of
India, one out of only three public institutions to have been granted this honour.
The Institute offers undergraduate and postgraduate programmes through its Departments,
Centres, and Schools. The Institute admits about 1200 students for the undergraduate (B.
Tech./B.Des. and Dual Degree) programmes and about 2200 students for the postgraduate
(M.Sc. / MPP / MA / M.Tech. / M.S.(Research) / M.Des. /M.B.A. / Ph.D.) programmes every year.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 Pa ge |6

Intellectual alertness, creativity and talent for innovation go into the making of an engineering
leader today and continue to be essential for professional competence tomorrow. The candidates
selected for admission live in pleasant surroundings of intellectually stimulating campus, use the
most modern equipment and laboratory facilities available, and go through the specialized
courses designed to meet the challenges of the future. The teaching methods rely on direct
personal contact between the teachers and the students. Living in such an environment with
people having similar goals and aspirations is an exciting experience during one’s academic life
and is of considerable value in one’s professional career.
Location: IIT Delhi is situated at Hauz Khas in South Delhi, bounded by the Sri Aurobindo Marg on
the East, the Jawaharlal Nehru University complex on the West, the National Council of
Educational Research & Training on the South, and the outer Ring Road to the North. The Institute
campus is about 19 km away from the Delhi Main Railway Station, 14 km from the New Delhi
Railway Station, 21 km from the Maharana Pratap Inter-State Bus Terminus (Kashmere Gate), 22
km from Indira Gandhi International Airport Terminal 3, and about 10 km from the domestic
terminal (Terminal 1) of the Delhi Airport. The campus is well connected through Delhi Metro with
two stations opening at its gates – Main Gate and Hostel Gate.
Campus: IIT Delhi is a residential Institution and provides residential facilities to as many students
and staff as possible, subject to availability. The Institute campus area extends to 320 acres with
many interesting topographical features, imaginatively laid out with picturesque landscape,
numerous buildings, and wide roads. The campus presents a spectacle of harmony in architecture
and natural beauty.
The main academic building houses various teaching, research, and library facilities. Though each
Department/ Centre/ School is a separate entity, all the Departments/Centres/Schools together
constitute an integrated complex. Most of classes at IIT Delhi take place in the new Lecture Hall
Complex (LHC). At the LHC and also in the blocks, lecture theaters with modern amenities and
equipment for projection have been located adjacent to two or more Departments for common
use. The campus also provides such amenities as staff clubs, hospital, shopping centres, banks,
ATMs, post office, community centre, stadium and playing fields.
The Students Activities Centre provides facilities for students’ extracurricular and physical
development. The central two-storeyed block with a swimming pool and a gymnasium hall has
amenities such as squash courts, hobbies workshop, seminar rooms, music rooms and other
multipurpose rooms for reading and indoor games. The amphitheater constructed in modern style
is an added amenity at the centre.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 Pa ge |7

CREDIT SYSTEM

Education at the Institute is organized around the credit system of study. The prominent features
of the credit system are a process of continuous evaluation of a student’s performance, and
flexibility to allow a student to progress at an optimum pace suited to his/her ability or
convenience, subject to fulfilling the minimum requirement for continuation.
Each course has a certain number of credits which describe its weight. A student’s performance
in a course is assessed by a grade awarded to him/her at the end of the semester for that specific
course, based on comprehensive evaluations during the entire duration of the course. The
student’s overall progress through the programme is measured by the number of credits that
he/she has completed satisfactorily. A minimum Grade Point Average (average score based on
grades obtained, weighted by the corresponding credits of each course), is required to be
maintained for satisfactory progress.
The minimum academic requirements for the various degrees, including minimum and maximum
credits to be registered in a particular semester, are indicated in the Courses of Study for the year
2025-2026, which will be made available on the Institute Website before the date of Orientation.
Every course is coordinated by a member of the teaching staff of the Department/ Centre/ School
which offers the course in a given semester. This Faculty member is called the Course Coordinator.
He/she has full responsibility for conducting the course, coordinating the work of the other
members of the faculty involved in that course, and for holding tests and assignments and
awarding grades. For any difficulty, a student is expected to approach the Course Co-coordinator
for advice and clarification.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 Pa ge |8

ADMISSION PROCEDURES AND REQUIREMENTS

I. Ph.D. Programmes
The award of the Ph.D. degree is in recognition of high achievements, independent research, and
application of scientific knowledge to the solution of technical and scientific problems. Creative
and productive inquiry is the basic concept underlying research work. The details of research
programmes in various Departments/ Centres/ Schools are given in Annexure I.
Admission to the Ph.D. Programmes: Admission to the Ph.D. programmes is normally made on
the basis of an interview of eligible candidates conducted by the Department/Centre/School
concerned, through its Department Research Committee (DRC) / Centre Research Committee
(CRC)/ School Research Committee (SRC). DRC/CRC/SRC may decide to conduct a written test as
well, or multiple interviews, or other ways or testing, in order to screen the candidates.
Applications are invited from candidates by advertising the programmes in Employment
News/web portals in March for the first semester and in October for the second semester every
year.
Admission Schedule: Normally, Ph.D. programmes are advertised in the month of March and
October each year, and test/interviews are carried out in the months of May and December.
Further, admission to the Ph.D. programme is possible at any time of the year with the application
being processed and candidates interviewed by the respective DRC/CRC/SRC. Ph.D. scholars can
join the Institute at any time of the year, though the course registration will be possible only at
the beginning of the subsequent semester. Such candidates must also fulfill the required academic
qualification / experience at the time of the interview. They must join the Institute within 4 weeks
after the issue of admission offer unless specifically permitted otherwise. Admission is subject to
the vacancy being available in the relevant specializations.

I(a) Minimum Qualifications for admission to Full-time Ph.D. Programmes:

Table 1 defines the minimum qualifications required for admission to full-time Ph. D. programmes
at IIT Delhi. Please note:
1. These are Institute minimum requirements and any Department/Centre/School
operating through their DRC/CRC/SRC can specify higher short-listing criteria than what
is specified here.
2. In addition to the qualifying degrees listed in the shortlisting criteria, the consideration
of equivalent degrees, if any, rests with the Department/Centre/ School.
3. This table includes most of the degrees, but each DRC/CRC/SRC is free to specify the
qualifications and disciplines acceptable for admission to their programmes.
4. Candidates in the final year of their programmes and who expect to complete all their
qualifying degree requirements before the date of registration are also eligible to apply for
admissions. For short-listing purposes, their performance until the preceding semester
(preceding year if their programmes are year based) would be considered but their
admission would be provisional, subject to their meeting the minimum eligibility criteria
after their final qualifying examination results are announced. In any case, all admissions

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 Pa ge |9

are provisional at first and it is confirmed only after all certificates and previous records are
duly checked and verified, a process which may take a few weeks into the starting semester.

Table 1: Minimum Qualification for Admission to Full-time Ph.D. Programmes

Sr. No. Qualifying Degree Minimum Performance in Qualification

the Qualifying Degree for Through National
General/OBC (Non-Creamy Level Examination
Layer)/EWS Category Requirements
Students

1. M.Tech./M.E./M.D./ 60% marks or 6.00 CGPA on Nil

M.Des. or equivalent a 10-point scale

2. M.Sc./MBA/M.A./ 60% marks or 6.00 CGPA on Qualified GATE/CSIR/

M.B.B.S. or equivalent a 10-point scale UGC NET/ICAR/ICMR/
DST-INSPIRE fellowship

3. B.E./B.Tech. or 70% marks or 7.00 CGPA on Qualified GATE/CSIR/

equivalent a 10-point scale UGC NET/CEED/ICAR/DST
INSPIRE Fellowship

Exemptions, Relaxations and Clarifications:

1. For SC/ST/PwD category candidates, the minimum performance in the qualifying degree
(S. No. 1 & 2 in Table 1) is relaxed from 60% to 55% (CGPA relaxed from 6.00 to 5.50).
2. For SC/ST/PwD category candidates, the minimum performance in the qualifying degree
(Sr. No. 3 in Table 1) is relaxed from 70% to 65% (CGPA relaxed from 7.00 to 6.50).
3. Qualifying degree performance is computed by aggregating performance over all the
semesters/years of the qualifying degree, as per the credit or weightage system approved
in the institution / board where the degree has been completed.
4. Requirement of qualification in GATE / National Exam is waived for the following categories
of applicants:
▪ Currently registered students in Centrally Funded Technical Institutes (CFTIs)
pursuing B. Tech./B.E./ Integrated M. Tech/ Integrated M. Sc. Programmes (or any
other programme of minimum four year duration, admission to which is on the
basis of JEE), who have completed 6 semesters or more, and have CGPA of 8.00 or
above (on a 10 point scale). Such students must obtain a CGPA of 8.00 or above at
the time of graduation, and before they formally register for the Ph.D. programme
(80% aggregate marks, if marks are the primary mode of evaluation);
▪ Graduates of CFTIs (in the programmes marked under (i)) with a final graduation
CGPA of more than 8.00 (80% aggregate marks, if marks are the primary mode of
evaluation);
▪ M.A or M.Sc. graduates from IITs with CGPA 8.00 or above.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 10

5. For purposes of shortlisting, the primary method of evaluation (i.e., CGPA/CPI, or

aggregate percentage, whichever is appropriate) followed by the institution where
candidate has obtained his/her qualifying degree will be used by IIT Delhi for determining
whether the candidate meets the final shortlisting requirements.
6. For assistantship purposes only (and not for qualification), candidates with M.B.B.S.
qualification will be considered equivalent to M. Tech., for admission to Ph.D. programme
in Centre for Biomedical Engineering;
7. For candidates with M.A. degree in English, a 5% relaxation in marks or 0.5 relaxation in
CGPA may be permitted for admission to the Ph.D. programme in Humanities and Social
Sciences;
8. Candidates holding an MBA degree are eligible for applying to the Ph.D. programme in the
Department of Management Studies.

I(b) Minimum Qualifications for Admission to Part-time and Sponsored (full-time) Ph.D.
Programmes:
The following eligibility conditions apply for Part-time and sponsored full-time programmes:
1. Only employees of Public Sector Undertakings or Government Departments or Research
and Development Organizations or Private Industries (approved by Faculty Boards) are
eligible for admission to these programmes.
2. The minimum full-time experience required after obtaining the qualifying degree and as
on date of registration, is given below in Table 2:

Table 2: Experience Required for Admission to Part-time Ph.D./ M.Tech./ M.S.(R) Programmes

For Admission Qualifications Work Experience

to Part-time (Post Qualification)
Programme

Ph.D. M.E./M.Tech./M.S.(R)/M.D./M.Des. or Nil

equivalent
Ph.D. B.E./B.Tech. /M.Sc./M.A./M.B.A. /MBBS/ 1 Year
or equivalent, from CFTIs/Central
Universities

Ph.D. B.E./B.Tech./M.Sc./M.A./M.B.A./MBBS or 1 Year

equivalent, and working in IIT Delhi*
(Project or Regular)
Ph.D. B.E./B.Tech./M.Sc./M.A./MBA/MBBS or 2 Years
equivalent, from institutions other than
CFTIs/Central Universities
M.Tech./M.S.(R) B.E./B.Tech./M.Sc or equivalent, from 6 Months
CFTIs/Central Universities

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 11
M.Tech./M.S.(R) B.E./B.Tech./M.Sc or equivalent, and 6 Months
working in IIT Delhi*
(Project or Regular)
M.Tech./M.S.(R) B.E./B.Tech./M.Sc. or equivalent, from 1 Year
institutions other than CFTIs/ Central
Universities)

3. Minimum qualification for these candidates is the same as for full-time candidates (Table
1), except that the requirement of qualifying in a national examination (column 3 in Table
1) is waived.
4. For part-time candidates from outside NCR (or at a radial distance of more than 50 km from
IIT Delhi), there is a minimum residency requirement of 6 months. DRC/CRC/SRC may
specify a higher residency requirement based on the courses recommended as well as the
background.
5. Sponsored (full-time) candidates seeking admission to a Ph.D. programme on the basis of
study leave, must submit a “Sponsorship Certificate” on a proper letterhead from the
appropriate authority in the organization clearly stating the following:
▪ for the period of his/her studies in the programme, the candidate would be treated
as on duty with usual salary and allowances; and
▪ that he/she will be fully relieved and granted study leave for a minimum period of 3
years (2 years for M.Tech. and equivalent degree holders).
6. Part-time candidates are required to submit a “No Objection Certificate” (NOC) on a proper
letterhead from the appropriate authority in the organization clearly stating the following:
▪ the candidate is permitted to pursue studies on a part-time basis;
▪ he/she will be fully relieved from duty and permitted to reside at the Institute for the
period of required residency that is essential for completing the course work (this is
not a requirement for candidates who are working in NCR or organizations located
within a distance of 50 km from the Institute);
that his/her official duties permit him/her to attend required classes as per the Time Table of IIT
Delhi;
▪ that his/her official duties permit him/her to devote sufficient time for research;
▪ facilities for research in the candidate’s field of research are available at the
candidate’s place of work, in case the proposed Ph. D. research plan requires him/her
to use these facilities when the candidate is physically present at this place of work.

*
Through proper channel

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 12

Template of this NOC is available on the IIT Delhi PG admissions website. Kindly note that lack of
confirmation and clarity on one or more of the above points in the NOC may make prevent the
applicant’s application being processed, even if he/she qualify in the interview/screening.
Duration of the Programmes: Minimum period of registration required for students with M.Tech.
or equivalent qualifications is 2 years whereas those with B. Tech. or equivalent qualifications is 3
years. All candidates are allowed a maximum of 7 years for submission of their thesis.
Course Work and other Academic Requirements: Breadth and depth of training pre- doctoral
courses are offered by each Department/ Centre/ School. Normally, candidates having a B. Tech./
M.Sc./ M.A., or equivalent degree are required to complete a minimum of 12 or 20* credits
(depending on the programme) with a minimum required DGPA of 7.50 and CGPA of 7.00. M.
Tech. or equivalent degree holders are required to complete a minimum of 6 * credits with a
minimum required DGPA of 7.50 and CGPA of 7.00.

*
A Department/ Centre/ School may specify a higher credit requirement for all their Ph.D. programmes. It may also require an individual
scholar to complete a larger number of credits based on his/her background and preparation level

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 13

II. M.Tech./ M.S.(Research) Programmes

The Institute runs a number of M. Tech./ M. Tech (High-Value Assistantship) and M. S. (Research)
programmes offered by various Departments, Centres, and Schools. M. Tech. and M.S.(R)
programmes mainly differ in the fraction of course and project/thesis credits. M. Tech.
programmes may have up to two- thirds of the credits for the course work, while M.S.(R)
programmes have two-thirds of the credits for the thesis component. Some of these programmes
are interdisciplinary programmes (IDP) where multiple academic units are involved. In these IDPs,
students with different backgrounds are eligible to be admitted to the programme. IDPs are
administered through a Programme Executive Committee or PEC. In these programmes, either
industry supports full-time students recruited by the Institute, or sponsors their employees for the
programme. In either case, regular industry feedback is obtained to adopt and improve the
curriculum to the needs of the industry. Industry sponsors also play a significant role in defining
the projects. The listing of all the Masters' programmes is given in Annexure II.

Eligibility for Programmes: B.Tech. or M.Sc. degree holders of a particular discipline are eligible
for admission to one or more programmes. The list of programmes to which a graduate of a
specific discipline is eligible to apply, is given in Annexure III.
Programme Duration: The minimum duration of M.Tech. and M.S.(Research) programmes is 4
semesters (24 months) for full time and 6 semesters (36 months) for part-time programmes and
M. Tech. (High Value Assistantship) programmes.
Admission Schedule: Normally, M.Tech./M.Tech. (High Value Assistantship)/M.S.(R) programmes
are advertised in the month of March each year in Employment News as well as one electronic
media and test/ interview are carried out in the month of May. M.S.(R) programmes are also
advertised in the month of October followed by test/ interview in December.
Further, just like Ph.D. admission, admission to M.S.(R) programmes is also possible at any time
in the year with the application being processed and candidates interviewed by the respective
DRC/CRC/PEC. Students in this programme can be admitted to the Institute at any time of the
year, though the course registration in such cases will be possible only at the beginning of the
subsequent semester. Such candidates must also fulfill the required academic qualifications
/experience at the time of interview. They must join the Institute within 4 weeks after the issue
of admission offer unless specifically permitted otherwise. Admission is subject to vacancy being
available in the relevant specializations.
Part-time Programmes: IIT Delhi also offers most of its M.Tech./M.S.(R) programmes in the
part-time mode for working professionals. They are expected to complete their credit
requirements in six semesters (maximum of ten semesters) by registering for a lower load than
full-time students each semester. Departments/Centres/Schools offer most of the core courses
between 8:00 AM and 10:00 AM to enable these working professionals to attend classes as well
as continue with their full-time employment.
Please note it may not always be feasible to slot all courses of the programme in the above
morning hours, and those candidates applying for part-time programmes should be flexible to
take courses at other times, if required.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 14

II(a) Minimum Qualifications and Procedure for Admission to Full-time M.Tech./M.S.(R)

Programmes:
Table 3 lists the minimum qualifications required for admission to full-time M.Tech./M.S.(R)
programmes at IIT Delhi. In this context, please note:

1. These are Institute minimum requirements and any Department/Centre/School operating

through their DRC/CRC/SRC/PEC can specify higher short-listing criteria than what is
specified here.
2. In addition to the qualifying degrees listed in the shortlisting criteria, the consideration of
equivalent degrees, if any, rests with the Department/Centre/ School. This table includes
many degrees for eligibility, but each DRC/CRC/SRC/PEC is free to specify the qualifying
degree disciplines as well as GATE disciplines acceptable for admission to theirprogrammes.
3. Admission to M. Tech./M. S.(R) programmes have been normally carried out in the past by
first short-listing the eligible candidates (meeting the minimum performance in their
qualifying degree - Column 4 of Table 3), and scoring above a GATE cut-off specified for that
programme and then conducting written test/interview at IIT Delhi. GATE cut-offs for various
Programmes last year are tabulated in Annexure IV.
4. Candidates in the final year of their programmes and who expect to complete all their
qualifying degree requirements before the third week of July 2025, are eligible to apply for
admission. For short- listing purposes, their performance till the preceding semester
(preceding year if their programmes are year based) would be considered, but their
admission would be provisional, subject to their meeting the minimum eligibility criteria
after their final qualifying examination results are announced.

Table 3: Minimum Qualification for Admission to full-time M. Tech./M.S.(R)/M. Des. Programmes

Programme & Qualifying Degree Minimum Performance in National Level

Admission Type the Qualifying Degree for Examination
General/OBC (Non-creamy Requirements
Layer) Category Students
M.Tech./M.Tech. B.E./B.Tech./M.Sc. 60% marks or 6.00 CGPA Valid GATE score
(High Value or equivalent on a 10-point scale
Assistantship)/
M.S. (R) (Admission
with GATE Score and
test/interview)*

Exemptions, Relaxations and Clarifications:

1. For SC/ST/PwD category students, minimum performance in the qualifying degree is
relaxed from 60% to 55% (CGPA 6.00 to 5.50).
2. Qualifying degree performance is computed by aggregating performance over all the
semesters/years of the qualifying degree).
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 15
3. The offer of admission to M.Tech. Programme (Full-time) will have to be accepted on the
Common Offer Acceptance Portal (COAP). Detailed instructions in this regard will be
provided on the IIT Delhi website.
4. Candidates with AMIE or Grad. IETE qualifications may also be considered for admission to
the M. Tech. Programmes; however, if provisionally selected for admission based on their
AMIE/Grad IETE performance, they would be required to complete 24 valid undergraduate
credits prescribed by the concerned DRC/CRC/SRC/PEC and clear the GATE examination
before being actually admitted to the M.Tech. Programmes.
5. For admission to all the above programmes, candidates with B.Tech. from IITs, graduating
with a CGPA of 8.00 or above, are exempted from qualifying GATE. If shortlisted, they will
be interviewed through videoconferencing.
6. For admission to M.S.(R), requirement of qualification in GATE/National Exam is waived for
the following categories of applicants:
▪ Currently registered students in Centrally Funded Technical Institutes (CFTIs) having
CGPA of 8.00 or above (on a 10 point scale) at the end of 6th semester or later, in
B.Tech./B.E./Integrated M.Tech./Integrated M.Sc. Programmes (or any other
programme of minimum four year duration, admission to which is on the basis of
JEE), the requirement of GATE/National Exam is waived for consideration of
admission to the M.S. (R) programme in IIT Delhi. Moreover, such students must have
obtain a CGPA of 8.00 or above at the time of graduation (and before they formally
register for the M.S.(R) programme).
▪ Graduates of CFTIs (in the programmes marked under (i)) with a final graduation
CGPA of more than 8.00 (80% aggregate marks, if marks is the primary mode of
evaluation);
▪ M.A or M.Sc. graduates from IITs with CGPA 8.000 or above.
However, if a candidate admitted to M.S.(R) programme following the above criterion
wanted to convert to M.Tech. programme, he/she should also meet the shortlisting
criteria of the M.Tech. programme, in addition to the conversion criteria (including
requirement, if any, of a valid examination in GATE / National Examination).
7. The requirements given in the table 3 are Institute minimum requirements and any
Department/Centre/School operating through their DRC/CRC/SRC can specify higher
short-listing criteria than what is specified here.

II(b) Minimum Qualifications for Admission to Part-time and Sponsored (full-time) M.Tech./
M.S.(R) Programmes:
The following additional eligibility conditions and relaxations apply for the Part-time and
sponsored full-time programmes:
1. Only employees of Public Sector Undertakings or Government Departments or Research and
Development Organizations or Private Industries (approved by Faculty Boards) are eligible
for admission to these programmes except M.Tech in Robotics(JRB) Programme.

*
The admission may also be done based on GATE score only, if any Academic Unit decides to do so. In such a case, the %age/CGPA will be
kept at Institute minimum.
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 16

2. For M.Tech. in Robotics (JRB) Programme, Prospective students to the full-time sponsored
programme, who do not already have a sponsor, may apply for the Robotics Consortium
sponsorship along with their application to the program by listing “Apply to IITD Robotics
Consortium” in the sponsor name, and do not need to supply the “Sponsorship certificate”
with their application.
3. Employees of only those organizations which are located within 50 km radius of IIT Delhi are
eligible to be considered for admission to part-time M.Tech./M.S.(R) programmes.
4. The minimum experience (Full Time) required after qualifying degree and as on date of
registration is as given in Table 2 above.
5. Minimum qualification for these candidates is the same as for full-time candidates except
that the requirement of qualifying in a national examination (Column 4 in Table 3) is waived
off.
6. Sponsored (full-time) candidates seeking admission to a M.Tech./M.S.(R) programme on
the basis of study leave, must submit a “Sponsorship certificate” on a proper letterhead from
the appropriate authority in the organization clearly stating the following:

▪ for the period of his/her studies in the programme, the candidate would be treated
as on duty with usual salary and allowances, and
▪ that he/she will be fully relieved and granted study leave for a minimum period of 2
years
7. Part-time candidates are required to submit a “No Objection Certificate” on a proper
letterhead from the appropriate authority in the organization clearly stating the following:
▪ the candidate is permitted to pursue studies on a part-time basis
▪ that his/her official duties permit him/her to devote sufficient time for studies
▪ that he/she will not be transferred to any other place during the period of study.

8. All Full-time Sponsored and Part-time candidates will be interviewed through

Videoconferencing/in person, if shortlisted, as decided by the Academic Unit.

Flexibility of Movement: At IIT Delhi, easy mobility of students from M.Tech. to Ph.D., M.Tech.
to M.S.(R), M.S.(R) to M. Tech. and M.S.(R) to Ph. D. is possible. It is possible for a student to join
M.Tech./M.S.(R) at IIT Delhi, and subsequently they can apply for a change to a research
programme if they feel confident. In this process, they save a considerable amount of time for
completing Ph.D. degree. Further details are available in the Courses of Study booklet available on
the IIT Delhi website.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 17

III. Master of Design in Industrial Design

The M.Des. program is hosted by the Department of Design, IIT Delhi.

Eligibility for Programmes:

To be eligible for the MDes Program at the Department of Design, IIT Delhi, candidates must hold
a minimum of 60% marks (or equivalent grades) in their qualifying degree. Additionally,
candidates must have successfully passed the Common Entrance Examination for Design for 2025
(CEED 2025).

Qualifying degrees include:

• Bachelor’s Degree in Design/Engineering/Architecture/: Completion of either a 10+2+4
years program (which incorporates a minimum four-year Bachelor’s course) or a 10+3+3
years program (comprising an Engineering Diploma and BE).
• Professional Diploma in Design: Completion of a 10+2+4 years program, which should be
a minimum four-year diploma program.
• BFA/BVA (4 Year professional program with entry after 10+2): Completion of a four-year
professional program following the 10+2 educational level.
• MSc: Completion of 10+2+3+2 program
• MA: Completion of 10+2+3+2 program

Programme duration: The M.Des program consists of 4 semesters, spanning a total duration of
24 months.

Admission Schedule:
The application process usually starts in the month of March, and the interviews will be carried
out in May/June.

Minimum Qualifications and Procedure for Admission to M. Des. Programmes:

• Admissions to the M.Des program will be conducted through the Common Entrance
Examination for Design (CEED).
• Applicants with valid CEED scores will be invited to participate in a Studio test and
Interview.
• Candidates who are in the final year of their programs and anticipate completing all
degree requirements before the third week of July 2025 are eligible to apply for
admission. Their performance until the preceding semester (or preceding year if their
programs are year-based) will be considered for shortlisting purposes. However, their
admission will be provisional, contingent upon them meeting the minimum eligibility
criteria after the announcement of their final qualifying examination results.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 18

Table 4: Minimum Qualification for Admission for M.Des. programme

Programme & Qualifying Degree Minimum Performance National Level

Admission Type in the Qualifying Degree Examination
for General/OBC (Non- Requirements
creamy Layer) Category
Students
M. Des. (Admission B.E./B.Tech /B.Des /B.Arch 60% marks or 6.00 CGPA Valid CEED Score
with CEED score and /BFA (4-year duration)/BVA (4- on a 10- point scale
test/interview) year duration) M.Sc/M.A or
equivalent

Exemptions, Relaxations and Clarifications:

• For SC/ST/PwD category students, minimum performance in the qualifying degree is
relaxed from 60% to 55% (CGPA 6.00 to 5.50).
• Qualifying degree performance is computed by aggregating performance over all the
semesters/years of the qualifying degree).

For further details, please visit https://design.iitd.ac.in

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 19

IV. M.Sc. in Economics and M.Sc. in Cognitive Science

The Institute has introduced new programme, M. Sc. in Economics and M.Sc. in Cognitive Science
(two- year Full time), at the Department of Humanities and Social Sciences from July 2020.

Eligibility for Programmes: Any Bachelor’s Degree or equivalent awarded by any of the
universities incorporated by an act of the central or state legislature in India or other educational
institutions established by an act of Parliament or declared to be deemed as a University under
Section 3 of the UGC Act, 1956, or an equivalent qualification recognized by the Ministry of
Education, Government of India, including Bachelor Degrees from universities/institutes located
outside India, subject to the guidelines for admission of foreign students as laid forth by the
statute of IIT Delhi. The bachelor’s degree or equivalent qualification obtained by the candidate
must entail a minimum of three years of education after completing higher secondary schooling
(10+2) or equivalent.
Programme Duration: The duration of M. Sc. programme is 4 semesters (24 months).

Minimum qualifications and procedure for admission to M. Sc. in Economics and M.Sc. in
Cognitive Science Programme::
Table 4 lists the minimum qualifications required for admission to full-time M.Sc. in Economics
and M.Sc. in Cognitive Science and M.Sc. in Cognitive Science Programmes at IIT Delhi. In this
context, please note:

1. These are Institute minimum requirements, and the Department can specify higher short-
listing criteria than what is specified here.
2. The admission to M.Sc. in Cognitive Science will be through a central national-level Joint
Admission Test in Cognitive Science (COGJET). The candidates with a valid COGJET or other
exams like GATE/NET/etc. (above a certain cut-off) will be invited to appear before an
interview panel.
3. The admission to M.Sc. in Economics* will be through an entrance test to be conducted by
the Institute. The written entrance test will be held on a date * to be decided later. The
syllabus of the written test is given in Annexure V.
4. Candidates in the final year of their programmes and who expect to complete all their
qualifying degree requirements before the third week of July 2025, are eligible to apply for
admission. For short-listing purposes, their performance till the preceding semester
(preceding year if their programmes are year based) would be considered, but their
admission would be provisional, subject to their meeting the minimum eligibility criteria
after their final qualifying examination results are announced.

*
For some additional seats only for the year 2025-26. Admission to M.Sc. Economics is mainly through JAM exam.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 20

Table 5: Minimum Qualification for Admission to M.Sc. in Cognitive Science Programme

Programme & Qualifying Degree Minimum Performance in National Level

Admission Type the Qualifying Degree for Examination
General/OBC (Non-creamy Requirements
Layer) Category Students

M.Sc. Economics a 3 or 4-year At least 55% or 5.5 CGPA Admission test

(Admission with undergraduate on a 10-point scale. conducted by IIT
written test) degree in Delhi.
B.A./B.Sc./B.Com./B.T
ech. /
B.E./B.Stat./B.Math.
or equivalent
M.Sc. Cognitive B.A./B.Sc./B.Com./ At least 55% or 5.5 CGPA GATE &
Science B.M.S./B.Tech./B.E./B. on a 10-point scale interview
Stat./B.Math.or
equivalent

Exemptions, Relaxations and Clarifications:

1. For SC/ST/PH category students minimum performance in the qualifying degree is
relaxed from 55% to 50% (CGPA 5.5 to 5.00).
2. Qualifying degree performance is computed by aggregating performance over all the
semesters/years of the qualifying degree. Taking into account all subjects including
languages and subsidiaries, all years combined).
3. For M.Sc. Cognitive Science, applicants with valid JAM/GATE/CSIR/JRF/NET scores (where
applicable) would be waived from COGJET. In addition, applicants from CFTIs with a
minimum GPA of 8.0, B.Tech. from IITs graduating with a CGPA of 8.0 or above, and those
with an MBBS degree from recognized institutions and universities are exempted from the
COGJET/GATE/JAM/CSIR/JRF/NET requirement. This will be subject to revision as decided
by the academic section of IIT Delhi and will be as per rules.
4. Admission to the other existing M.Sc. programmes (Physics, Chemistry, Maths, Biological
Sciences and Economics*) is through Joint Admission Test for M.Sc. (JAM).

*
For M.Sc. (Economics), some additional seats are being offered through separate test/interview only for the year 2025-26.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 21

V. Master of Public Policy (MPP)

The Institute has introduced new programme, Master of Public Policy (MPP) (two-year Full time)
with focus on Science, Technology & Innovation (STI) and Development at the School of Public
Policy from August 2021.

Eligibility for Programmes: Qualifying degrees for the MPP Programme are: five-year Bachelor’s
degree such as M.B.B.S., B.A. L.L.B. (Hon.), B.Arch. or equivalent; four year Bachelor’s Degree such
as B.Tech., B.Sc. (Ag), BVSc, or equivalent; and post-graduate degrees such as M.A., M.Sc., M.Phil.,
Integrated M.Sc./M.A., M.Tech. or equivalent.

Programme Duration: The duration of MPP programme is 4 semesters (24 months).

Minimum Qualifications and Procedure for Admission to Master of Public Policy Programme:
Table 5 lists the minimum qualifications required for admission to full-time MPP Programme at
IIT Delhi. In this context, please note:

1. These are Institute minimum requirements, and the Department can specify higher short-
listing criteria than what is specified here.
2. The admission to MPP programme will be through a two-tier admission process:
performance in written/oral exam and performance in the interview. The written/oral
examination will include evaluation of analytical abilities; quantitative skills; and reading,
comprehension, and reasoning.
3. Candidates in the final year of their programmes and who expect to complete all their
qualifying degree requirements before the third week of July 2025, are eligible to apply for
admission. For short-listing purposes, their performance till the preceding semester
(preceding year, if the programmes are year based) would be considered, but their
admission would be provisional, subject to their meeting the minimum eligibility criteria
after their final qualifying examination results are announced.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 22

Table 6: Minimum Qualification for Admission to Master of Public Policy Programme

Programme Qualifying Degree Minimum Performance in

the Qualifying Degree for
General/OBC (Non-creamy
Layer) Category Students

Master of Public Policy five-year Bachelor’s degree such as At least 60% or 6.0 CGPA
M.B.B.S., B.A., L.L.B. (Hon.), B.Arch. on a 10-point scale.
(With focus on Science,
or equivalent; four year Bachelor’s
Technology &
Degree such as B.Tech., B.Sc. (Ag),
Innovation (STI) and
BVSc, B.Plan or equivalent; and
Development)
post-graduate degrees such as
Admission with written/ M.A., M.Sc., M.Phil., Integrated
oral exam and personal M.Sc./M.A., M.Tech. or equivalent
interview

Exemptions, Relaxations and Clarifications:

1. For SC/ST/PwD category candidates, minimum performance in the qualifying degree is
relaxed from 60% to 55% (CGPA 6.0 to 5.50).
2. Qualifying degree performance is computed by aggregating performance over all
semesters/years of the qualifying degree. Taking into account all subjects including
languages and subsidiaries, all years combined).
For further details, please visit: https://spp.iitd.ac.in/academics.php

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 23

VI. M.A. in Culture, Society, Thought

The Institute has introduced a new programme, MA in Culture, Society, Thought (two-year Full
time), at the Department of Humanities and Social Sciences from July 2024.

Eligibility for Programmes:

1. The Qualifying degree for this Masters programme is Graduation in any discipline, (maximum
55% or equivalent CGPA for BA degree), first division for all others — e.g., B.Tech., B.Sc.,
B.Com., B. Des., B.Ed., etc.
2. Graduates of 3-year and 4-year UG programme are both eligible for the programme. No credit
waiver is to be given to graduates of 4-year UG programs.
3. B.Tech. Advanced Standing students of IIT Delhi are allowed.

Programme Duration:
The duration of MA in Culture, Society, Thought is 4 semesters (24 months).

Minimum Qualifications and Procedure for Admission to Masters in Culture, Society, Thought:
Table 7 below lists the minimum qualifications required for admission to full-time Masters in
Culture, Society, Thought Programme at IIT Delhi. In this context, please note:

These are Institute minimum requirements, and the Department can specify higher short-listing
criteria than what is specified here. The admission to this Masters programme will be through a
two-tier admission process:

(i) Performance in written exam held by the Department of Humanities and Social Sciences or
Gate score in any XH subject.

(ii) Candidates shortlisted on the basis of written Exam / GATE score will be invited for interview
organized by and held at the Department of Humanities and Social Sciences. The
written/oral examination will include evaluation of analytical abilities; basic numerical and
logical reasoning skills; and reading and comprehension.

(iii) Candidates in the final year of their study programmes and who expect to complete all their
qualifying degree requirements before the third week of July 2025, are eligible to apply for
admission. For short-listing purposes, their performance till the preceding semester
(preceding year, if the programmes are year based) would be considered, but their
admission would be provisional, subject to their meeting the minimum eligibility criteria
after their final qualifying examination results are announced.

(iv) Other details about the programme, admission procedure and exam will be available on
the Department website.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 24

Table 7: Minimum Qualification for Admission to M.A. in Culture, Society, Thought

Programme Qualifying Degree Minimum Performance National Level

in the Qualifying Examination
Degree for Requirements
General/OBC (Non-
creamy Layer)
Category Students

MA Culture, Society, Bachelor’s degree Graduation in any Entrance exam to be

Thought (Admission with (B.A./B.Sc./B.Co discipline, (maximum conducted at IIT Delhi
written test conducted by m./B.Des./B.Tech. 55% or equivalent followed by interview,
the Department or GATE /B.Ed. or CGPA for BA degree), candidates with GATE
score in any XH subject, equivalent) first division for all score qualify for
followed by interview) others — e.g., B.Tech., interview based on
B.Sc., B.Com., B. Des., shortlisting criteria.
B.Ed., etc.

Exemptions, Relaxations and Clarifications:

1. For SC/ST/PwD category candidates, minimum performance in the qualifying degree is
relaxed by 5%.
2. Qualifying degree performance is computed by aggregating performance over all
semesters/years of the qualifying degree. Taking into account all subjects including
languages and subsidiaries, all years combined).

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 26

RESERVATION OF SEATS (Where GoI Rules apply)

1. 15% seats are reserved for SC and 7.5% for ST candidates.

2. 27% seats are reserved for Non-Creamy layer OBC candidates. All candidates applying for
admission under this category should produce the OBC (Non-Creamy Layer) Certificate
applicable for OBCs in the Central list at the time of interview. For details and specimen form
visit: http://www.iitd.ac.in.
3. 10% seats are reserved for EWS (Economically Weaker Section) candidates.
4. 5% seats in the respective categories are reserved for the Persons with Disability (PwD).
Note: All shortlisted candidates applying for admission under the reserved categories are
required to produce the relevant certificate at the time of interview. The Scheduled
Tribe (ST) category candidates are required to produce ‘Validity Certificate’ along
with the ST category certificate.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 27

GENERAL GUIDELINES

(a) The minimum eligibility criteria indicated above for each programme is only an enabling
clause. The Deptt./Centre/School may fix higher criteria at the time of short listing keeping
in view the number of candidates, minimum background expected to cope with the
programme etc.
(b) The minimum prescribed marks in aggregate (of all the years/semesters of the qualifying
examination) is calculated by IIT Delhi as per example given below:

Years 1st Semester (%) IInd Semester (%)

1st year 250/400 62.50 290/400 72.50
IInd Year 205/400 51.25 280/400 70.00
IIIrd Year 210/400 52.50 350/400 87.50
IVth Year 240/400 60.00 150/200 75.00
Total 905/1600 1070/1400

Aggregate (% age) 1975/3000=65.83% (of all the years/semesters)

(c) Admission on part-time basis is further subject to the availability of seats for part-time
and decision of the respective DRC/CRC/SRC/PEC
(d) Candidates who are in the final year of their qualifying examination can be considered
for admission only if they complete the requirement of their final examination including
Viva-Voce by the date of Registration given on page 4. Candidates must inform the
Academic Section, IIT Delhi in writing by the date of Registration, if the requirements of
their qualifying degree including Viva-Voce, if any, are not met by this date. Failure to
inform the Academic Section about non-completion shall result in forfeiture of entire fees
deposited by them in addition to cancellation of their admissions.
(e) The applications will be scrutinized by the Department/Centre/School concerned.
(f) The exact date for the test/interview, wherever applicable, will be communicated by
the Department/Centre/School. For any query regarding the date of test/interview,
selection result and operation of waiting list please contact the concerned Deptt./Centre/School
at the Telephone Nos. given on page 37 & 38 of this brochure.
(g) Application incomplete, in any respect, is liable to be rejected.
(h) A provisional list of applicants selected for admission and of applicants selected for
the award of Assistantship along with those placed on waiting will be displayed on
the Department/Centre/School notice board /website within a day of the test/interview.
The selected candidates would be required to pay the first installment of fees soon
after the admission offer letter is issued to the candidates failing which seats will be
offered to those on the waiting list.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 28

APPLICATION PROCEDURE

Submission of Application is only through online procedure. Candidates are NOT required
to send hard copy of the application form and bank challan. Online submission of the
application form may be made by accessing the Institute website:
https://home.iitd.ac.in/pg-admissions.php. Candidates belonging to General/OBC/EWS
category are required to pay for each application form a fee of Rs. 200/- and the candidates
belonging to SC/ST/PwD categories are required to pay
Rs. 50/-. The bank charges will be borne by the candidate.

IMPORTANT INSTRUCTIONS FOR FILLING APPLICATION FORM

(a) Separate application form should be filled for Ph.D. programme for each
Department/Centre/School.
(b) Separate application form should be filled for each M.S.(R) programme.
(c) Separate application form should be filled for M.Des. programme.
(d) Separate application form should be filled for MPP programme.
(e) Separate application form should be filled for M.A. programme.
(f) Separate application form should be filled for M.Sc. (Cognitive Science/Economics Science)
programme.
(g) Separate application form should be filled for each M.Tech. programme.
(h) For the GATE qualified candidates applying for full-time M.Tech. Programme, the offer for
admission, if selected, will be through Common Offer Acceptance Portal (COAP). Such
candidates must register on COAP portal before applying and mention COAP Registration
No. in the application form.
(i) GATE score cut off criteria used for short-listing candidates in different non-sponsored (full-
time) M.Tech. programmes during the previous academic year is given in Annexure IV. This
is only for the candidate’s reference and the criteria may even change substantially based
on applications received for the current admissions.
(j) Part-time/Sponsored (full-time) candidates must submit NOC/Sponsorship Certificate from
their employer at the time of interview (Robotics
Consortium sponsorship applicants to JRB program are exempted).
(k) Filling of false information will lead to rejection of application/cancellation of admission.
(l) The application fee is not refundable in any case.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 29

(m) Please fill the form carefully. It may be noted that no change can be made after the form is
submitted. Further, no request for any change in the form will be entertained. Fill the
programme code at the appropriate place in the Application Form. The Ph.D. programme
codes are given in Annexure-I and M.Tech./M.Des./M.S.(R)/M.Sc./MPP/M.A. programme
codes are given in Annexure-II.
If you find any difficulty in completing your application, please see Frequently Asked Questions
(FAQ).

HOSTEL ACCOMMODATION

IIT Delhi campus has a total of 12 boys’ hostels, 4 girls’ hostels and 1 transit accommodation
(for girls) to accommodate its undergraduate and post-graduate (including PhD scholars) full-
time students (13 old, non-A/C hostels & 3 new, A/C hostels). With a student population of
~13000, only ~7000 hostel seats are available (several on sharing basis only; please see the
following link –
https://bhm.iitd.ac.in/static/media/Hostel_Accommodation_IITD.66923f5fb816b23af9cc.pdf )

Only limited number of students can be accommodated in the campus, mostly on sharing basis.
Allotment of seats in hostels is based on a clearly defined institute policy. All female,
international and differently abled students are offered hostel accommodation (mostly on
sharing basis). Male PG students (non MSc) may be offered hostel accommodation on sharing
basis, based on availability generally after two semesters. It is not compulsory to avail the
offered hostel accommodation. Detail about hostels and charges are available below, and at
https://bhm.iitd.ac.in/resources

REGISTRATION FOR COURSES

All students are required to report for Orientation and Central Registration before the
commencement of each semester according to the schedule/procedure notified in advance. The
students register themselves for the courses in consultation with the Course Coordinator. The
courses to be run by the Departments are made known to the students before registration. On
admission, the students should go through carefully the Departmental advice of courses for their
discipline. They should also go through the Prospectus as well as the Courses of Study regarding
the rules governing their academic duties and performance. In some Departments, the required
performance levels for the continuation of registration may be higher than those given in the
Prospectus and the Courses of Study. The admitted students must acquire a copy of the
departmental norms in such cases.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 30

FEES AND PAYMENTS

I. Institute Dues Payable by 2025 Entry Ph.D./M.Tech./ M.S.(R)/M.Des./M.Sc./MPP/M.A. Students

Table 8: Schedule of Fee Applicable (per semester) for Different Programmes

Category Tuition Fees Other Charges* Total Amount

M.Tech./M.S.(R)/MPP/M.Des. Students
Receiving Institute/Project Assistantship or Teaching Positions Holders
General/OBC/EWS 17,500 22,400 Rs. 39,900
SC/ST/PwD 0 22,400 Rs. 22,400
M.Tech./M.S.(R)/MPP Students
(Sponsored Full-time, Part-time and Non-teaching Position Holders)
General/OBC/EWS 75,000 20,150 Rs. 95,150
SC/ST/PwD 0 20,150 Rs. 20,150
All Full-time Ph.D. Students
General/OBC/EWS 7,500 22,400 Rs. 29,900
SC/ST/PwD 0 22,400 Rs. 22,400
All Part-time Ph.D. Students
General/OBC/EWS 17,500 20,150 Rs. 39,900
SC/ST/PwD 0 20,150 Rs. 20,150
M.Sc./M.A. Students
General/OBC/EWS 7,500 22,400 Rs. 29,900
SC/ST/PwD 0 22,400 Rs. 22,400

Note: SC/ST/PwD students are given 100% exemption from payment of tuition fee.
The exact amount of fees and mode of payment will be indicated in the offer of admission.

*
Other charges include one time charges at the time of admission in addition to per semester charges

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 31

II. Hostel Charges Payable by 2025 Entry Students

S. No. Details Amount

ONE-TIME CHARGES (for every fresh allotment)

A BHM Deposits (one-time)

1 Seat allotment charges (Non-refundable) 7,000/-

2 Security (Refundable) 15,000/-

PER-SEMESTER CHARGES
(No pro-rata applicable due to hostel operations being fully cooperative in nature)

B *Hostel Mess Charges

(Include food, kitchen consumables, human resources, IGL and associated costs)

1 Old Hostels (non-A/C) 36,000/-

2 Nalanda (transit accommodation) 36,000/-

3 New Hostels 36,000/-

(Centralized A/C, only for PG students, including PhD scholars and non-
MSc/MA students)

C ** Centralized AC charges
(Applicable for all residents in new hostels; irrespective of program/entry year)

1 All students in new hostels 15,000/- (Single Occupancy)

7,500/- (Double Occupancy)

* The charges for mess are tentative based on expenditures incurred during previous semesters and may vary as per actuals – the
actuals are calculated only at the end of semesters. The charges are also subject to revision from time to time (e.g., depending on IGL
rates, revision of minimum wages by the Government etc.). At the end of the semester, any excess charge paid by the students in a
semester will be adjusted towards the charges to be paid for the next semester, i.e., the amount to be paid by students in the next
semester will be reduced by any excess charges paid by student in the previous semester. Any student leaving/vacating the hostel
permanently (due to termination, or due to completion of academic requirements at IIT Delhi or due to exceptional personal circumstances
after proper communication and permissions from competent authority) is refunded the excess amount paid in their bank account after
duly submitting requisite form(s) with required information.

** New Hostels, i.e., Dronagiri, Saptagiri and Sahyadri have centralized A/C and, are only for PG (including PhD, excluding MSc and Dual
Degree) students. These centralized A/C charges are also subject to revision from time to time as communicated by the infrastructure
unit.For more information, please visit https://home.iitd.ac.in/hall-of-residence.php

It is NOT compulsory to avail hostel accommodation at IIT Delhi (if it is offered).

The transparent hostel allotment process does not have any provisions to hand-pick/choose any particular hostel/seat.
Other information related to hostel accommodation is available at-
(a) https://home.iitd.ac.in/hostel-rules.php
(b) https://bhm.iitd.ac.in/resources

Please note that for all students availing accommodation facility, ‘Hostel Seat Rent’ is applicable. This is part of academic fee and details
may be referred from academic fee details. It may be revised from time to time based on the changing operational costs as communicated
by the Infrastructure and Institute Accounts units.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 32

FINANCIAL ASSISTANCE AND OTHER SUPPORT

I. Ph.D. Programmes
A scheme for the award of Teaching/Research Assistantship for providing financial assistance to
the students exists. In terms of this scheme, those non-sponsored students who are admitted on
full-time basis are considered for the award of Teaching/Research Assistantship. These rates have
been significantly enhanced by the MoE recently and are as indicated below:

Table 9: Assistantship amounts for Full-time Institute Ph.D. students

Period of Assistantship Assistantship Amount Hours/ Week

With B.Tech/B.E./M.Sc./ Assistantship to be
M.Tech./M.E./MBBS or Provided
equivalent qualifications

First 2 years of Registration Rs. 37,000/- p.m. 8

Next 3 years of Registration Rs. 42,000/- p.m. 8

Other conditions and benefits: In addition, the full-time students enjoy a number of benefits but
are also required to satisfy academic performance requirements for continuation of assistantship
from semester to semester.
▪ The maximum duration for which assistantship can be awarded to a Ph.D. student is
5 years.
▪ In the first instance, the assistantship is awarded for one semester. Continuation of
the assistantship during the subsequent semesters is contingent upon satisfactory
academic performance and satisfactory performance in the discharge of
responsibilities assigned under the assistantship scheme. For this purpose, an SGPA
of 7.00 at the end of a semester in respect of those semesters when the student has
been assigned coursework will be considered as satisfactory performance. For details
of SGPA calculation refer to the Institute Prospectus.
▪ All full-time students participating in a sponsored project/consultancy project (in
addition to their assistantship work) can be paid an honorarium of up to Rs. 25,000/-
p.m. by the PI/CI of the project. All such work can be undertaken only with the consent
of their supervisor(s).
▪ The faculty of an Engineering/Science College sponsored by his/her institution for
pursuing Ph.D. at IIT Delhi and meeting all the academic requirements of full-time
Institute assistantship can be considered by the DRC/CRC/SRC/PEC for the award of
Institute Assistantship. This assistantship would be over, and above the emoluments,
he/she may be getting from his/her parent institution.
▪ A part from Institute assistantship, IIT Delhi has a number of assistantships sponsored
by national as well as international institutions and/or industries. All students
including faculty of engineering/science colleges meeting the academic qualifications
for admission as full-time students with Institute assistantship are also entitled to
apply for these. For more information on the availability of such scholarships in your
area, please contact your respective department/centre/school.
▪ In exceptional cases with the approval of the Chairperson, Senate, Sponsored
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 33
(Fulltime) candidates employed in CSIR/DRDO/PSUs may also be offered assistantship
provided they have qualified either GATE or any other national level examination like
CSIR/UGC NET/ICAR etc. and fulfill the requirement for award of assistantship and
their employer has no objection to the same.
▪ Institute provides seed money of Rs. 20,000/- once during the program as partial
financial assistance for presenting papers abroad in good academic conferences. All
full time (and part-time on IRD/ FITT Projects) Research Scholars are also eligible for
additional financial assistance of Rs. 1,80,000/- as Research Scholar Travel Award
(RSTA). Some highly meritorious Research Scholars are also eligible for an additional
travel grant of Rs. 2,00,000/- as Research Excellence Travel Award (RETA).
▪ Institute is in the process of formalizing a number of agreements with leading foreign
institutions or agencies for supporting up to 6 months long research visits by Ph.D.
students. This would enable interested students with the consent of their supervisor
and DRC/CRC/SRC to undertake a research visit which would increase his/her
exposure while adding value to his/her work.
▪ It is expected that all assistantship holders will have the good general physique. He/
She will have to produce on the date of Central Registration, a certificate to that effect
in the prescribed format. A copy of the format would be given along with the
admission offer letter. The admission is subject to his/her being found medically fit.

II. M.Tech./M.S. (R)/M.Des. and M.Tech. (High-Value Assistantship) students

A scheme for the award of Teaching/Research Assistantship for providing financial assistance to the
students exists. The present scheme is described below:
▪ Students admitted to M.Tech./M.S.(R) and M.Des. Programmes on full-time basis are
considered for the award of Teaching Assistantship under which they will be paid
Rs.12,400/- per month and would be required to provide assistance of 8 hours/week
to the Department/Centre/School.
▪ Only full-time non-sponsored students who have qualified GATE/CEED are eligible for
assistantship
▪ The maximum duration for which Assistantship can be awarded to M.Tech./M.S.(R )/
M.Des. students is 4 semesters.
▪ Students admitted to M Tech. (High Value Assistantship) 3 years Programme are
considered for the award of High Value Assistantship under which they will be paid
Rs. 22,000/- per month and would be required to provide laboratory support of 20
hours/week to the Department/Centre/ School.
▪ The maximum duration for which Assistantship can be awarded to M. Tech. (High
Value Assistantship) students is 6 semesters. They will be charged Institute fee at par
with regular full-time M.Tech. students. For the purpose of academic rules viz
registration limit of courses, duration of the programme, they will be governed by the
same rules as applicable to part-time M.Tech. students. Once the students has
accepted the offer of admission and registered for 3 years M.Tech. programme ,
he/she would not be allowed to change over to the 2 years M.Tech. programme. If
the students fails to perform and provide laboratory support, they may be issued a
warning. If despite the warning, their performance is not satisfactory, the registration
may be terminated.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 34
▪ In the first instance, the assistantship is awarded only for one semester. Thereafter,
continuation of the assistantship during each semester is contingent upon satisfactory
academic performance and satisfactory performance in the discharge of
responsibilities assigned under the assistantship scheme. For this purpose an SGPA of
not less than 7.00 (6.75 in the case of SC/ST/PwD) at the end of the semester is treated
as satisfactory academic performance.
▪ All full-time M.Tech./M.S.(R)/M.Des. students participating in a sponsored project/
consultancy project (in addition to their assistantship work) can be paid an
honorarium of upto Rs. 3,000/- p.m. by the PI/CI of the project. All such work can be
undertaken only with the consent of their supervisor(s).
▪ Candidates qualified for CSIR JRF will not be allowed to avail fellowship for doing
M.Tech./M.S.(R) programmes. However, they can avail the CSIR fellowship for doing
the Ph.D. programme.
▪ Apart from the above-mentioned scheme for teaching/research assistantships, there
are a number of fellowships/scholarships instituted by Industries/Individuals. (For
more information on these scholarships/ assistantships/fellowships please contact
the respective department).
▪ A number of DAAD scholarships under the KOSPIE programme may be available.
Indian Students pursuing M.Tech. at IIT Delhi are eligible for this scholarship for doing
their thesis work for about 6 months at one of the nine German Technical Universities
(TU9).
▪ Institute is pursuing a number of other collaborative agreements with leading
research laboratories an universities to enable such research visits by post-graduate
students
▪ It is expected that all assistantship holders will have good general physique. He/she
will have to produce on the date of Central Registration, a certificate to that effect in
the prescribed format. A copy of the format would be given along with the admission
offer letter. The admission is subject to his/her being found medically fit.
▪ Indian candidates interested in the ReNew Green Scholars Programme @IITD in the
Department of Energy Science and Engineering in either of the two M.Tech.
programmes (ESR and ESN) should fill up another form in the ERP, which will pop up
after submission of the main application.

III. M.Sc./ MA/MPP Programme

Merit-cum-Means (MCM) Scholarship – The Institute offers Merit-cum-Means scholarships to M.Sc.
students. These scholarships are offered to about 25% of the students whose annual family income is
upto Rs. 4.5 lakh.

The present value of Merit-cum-Means scholarship is Rs. 1000/- per month for General / OBC / EWS
students and the recipient is exempted from paying tuition fee. Valid family income proof is required to
be uploaded annually on ERP.

For renewal of this MCM Scholarship, students need to maintain minimum CGPA and SGPA i.e. 6.0

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 35
Institute Free Studentship
▪ The Institute offers tuition fees waiver to 10% of the students on the basis of means alone, if more than
25% students are eligible for MCM.
Free Messing and Pocket Allowance
It covers the basic menu charges plus Rs. 250/- per month as pocket allowance for SC and ST category
for a fixed period of time (depending on the programme), provided the student’s annual family
income is less than Rs. 4.5 lakh.
Valid family income proof is required to be uploaded annually on ERP.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 36

REFUND OF FEES
In case, student withdraws the admission due to any reason, refund of fees will be as under:

Admission timeline Date of applying for refund of Amount to be refunded

fee for 1st Sem 2025-26

For admission accepted On or before 5th July 2025 Fee paid less Rs. 1000/-
before 5th July 2025 (processing fee)

6th July to 18th July 2025 Security money less Rs.

1000/- (processing fee)

For admission accepted from On or before 18th July 2025 Fee paid less Rs. 1000/-
6th July 2025 to 18th July 2025 (processing fee)

After 18th July 2025 Security money less Rs.

1000/- (processing fee)

For refund of fees and/or security deposit the student must apply on the prescribed form available
on the Institute Website:
https://owncloud.iitd.ac.in/nextcloud/index.php/s/RqTftaxLYB8MMCr

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 37

CONTACT TELEPHONE NOS. AND EMAIL-IDS

1. For any query/clarification related to application and admission process, please contact
Academic Section at the following telephone Nos.: Tel: 011-26591737, 011-
26597109/7103 or write to [email protected] (preferred).
2. For query regarding the date of interview, selection result and operation of waiting list,
please contact the concerned Deptt./Centre/School at the following Emails IDs (preferred)
or Telephone Numbers (prefix area code 011 if calling from within India, and country
code/area code 0091/11 if calling from outside India):

ACADEMIC UNITS TELEPHONE EMAIL-ID

DEPARTMENTS
Applied Mechanics 26591201 [email protected]
Biochemical Engineering and 26591001 [email protected]
Biotechnology
Chemical Engineering 26591021 [email protected]
Chemistry 26591501 [email protected]
Civil Engineering 26596422 [email protected]
Computer Science and Engineering 26591291 [email protected]
Design 26548731 [email protected]
Electrical Engineering 26591071 [email protected]
Energy Science and Engineering 26591251 [email protected]
Humanities and Social Sciences 26591371 [email protected]
Management Studies 26591171 [email protected]
Mathematics 26591471 [email protected]
Materials Science and Engineering 26596659 [email protected]
Mechanical Engineering 26591051 [email protected]
Physics 26591331 [email protected]
Textile and Fibre Engineering 26591401 [email protected]
CENTRES
Applied Research in Electronics 26591101 [email protected]
Atmospheric Sciences 26591301 [email protected]

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 38

Automotive Research and Tribology 26591281 [email protected]

Biomedical Engineering 26596132 [email protected]
Rural Development and Technology 26591121 [email protected]
Sensors, Instrumentation and Cyber- 26591431 [email protected]
physical Systems Engineering
National Resource Centre for Value 26596585 [email protected]
Education in Engineering
Transportation Research and Injury 26596361 [email protected]
Prevention
Optics and Photonics 26591336 [email protected]
SCHOOLS
Amar Nath and Shashi Khosla School of 26596056 [email protected]
Information Technology
Bharti School of Telecommunication 26596200 [email protected]
Technology and Management
Yardi School of Artificial Intelligence 26548728 [email protected]
Kusuma School of Biological Sciences 26596104 [email protected]
School of Interdisciplinary Research 26548519 [email protected]
School of Public Policy 26596508 [email protected]
INTERDISCIPLINARY M.Tech. PROGRAMME
Cyber Security 26597351 [email protected]
Instrument Technology 26596752 [email protected]
VLSI Design, Tools and Technology 26598705 [email protected]
Telecommunication Technology and 26596200 [email protected]
Management
Opto-Electronics and Optical 26591331 [email protected]
Communication [email protected]

Robotics 26596032 [email protected]

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 39

ANNEXURE-I

RESEARCH PROGRAMMES: DOCTOR OF PHILOSOPHY (PH.D.)

The Institute offers research programmes leading to the degree of Ph.D. in the following areas
in the various Departments/Centres/Schools.

Department of Applied Mechanics [Code AMZ]

Research Areas in Solid Mechanics: Large Deformations, Impact Mechanics, Elasticity,
Piezothermoelasticity, Composite Materials and structures Plates and Shells, Non-linear Dynamics
and Chaos, Off-Shore Structures, Smart Structures, Structural Stability, Snow Mechanics, Dynamic
Plasticity, Nano Composites, Damage Mechanics, Soft Materials, Structural Health Monitoring,
Functionally Graded Structures, Multi-Scale Modelling of Nano-Structures, Biomechanics/Cell
Mechanics, Cardiovascular Biomechanics, Brain Biomechanics, Computational Surgery, Fracture
Mechanics, Contact Mechanics, Machine Learning, Stochastic Mechanics, Soft Robotics,
Scientific AI, Digital Twin/health, Wearable Robotics/Device.
Research Areas in Fluid Mechanics: Internal and External Flows, Solid-Liquid Flows,
Computational Fluid Dynamics, Hydrodynamic Stability; Turbulence, Aerodynamics and
Aeroacoustics; Turbulent Heat Transfer Compressible Flows, Fluid-structure Interaction, Stratified
Flows, Low Dimensional Modeling Biofluid Mechanics.
Research Areas in Design Engineering: Computer Aided Design, Design Engineering., Reliability
Engineering, Engineering Alternative, Ergonomics, Reverse Engineering, Design and Analysis of
Biomedical Devices, Compliant Mechanisms and Smart Instrumentation, Bio-inspired Engineering,
Design under Uncertainty, Generative Design.

Department of Biochemical Engineering and Biotechnology [Code BEZ]

Microbial and Enzyme Engineering: Analysis and design of microbial and enzyme reactors for
production of industrially important products such as biofuels, industrial enzymes, biopolymers,
organic solvents, biofertilizers and biopesticides etc.; development of bio-sensors for detection of
various analytes; Whole cell catalyzed biotransformations.
Bioseparation and Downstream Processing: Membrane based separation processes,
chromatographic separation processes, Membrane processes for water recycle.
Metabolic engineering: Application of metabolic engineering principles for the development of
cell factories for the production of important metabolites including renewable chemicals and
therapeutic compounds.
Animal and plant Mammalian cell culture: Development of cell culture techniques for cultivation
of plant and animal Mammalian cells in specialized reactors for production of therapeutic
compounds.

Environmental Biotechnology: The development of reactors and processes for stabilization of

organic and industrial wastes; enzymes engineering for treatment of textile effluents and plastic
waste; Effect of environmental factors on microbial community dynamics.
Biochemistry and molecular biology: Industrial enzymes, development of recombinant clones for
over- production of enzymes and metabolites, development of expression systems in bacteria and
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 40
yeasts, Human therapeutics production in yeast, bioenergetics and biological molecular machines,
Nanoparticle-based drug delivery and protein-based nanodevices, cancer biology, microRNA
biology.
Bioinformatics and Genomics: Genome editing with programmable nucleases; analysis and
interpretation of next-generation sequencing data; traditional home-medicine and cancer big data
analysis.
Biophotonics: Development of fluorescence and optical imaging methods for detection of single
molecules to the whole cell. Application of these methods for biosensing of pathogenic microbes
and cancer cells.
Agricultural Microbiology: Plant microbe interactions; biocontrol.
Electromicrobiology: Extracellular electron transfer; microbial electrochemistry.
Biomicrofluidics: Development of lab-on-a-chip based techniques to study the physiology of
vascular cell, Fluid mechanics at low Reynolds number limit, In-vitro model development for
human microvasculature and its applications in the characterization of vascular diseases,
Microfluidic approaches to study cellular dysfunction.
Theoretical and Computational Biophysics: Biological fluid dynamics, biophysics of membrane
deformation, theoretical modeling of bacterial physiology, mechanics of cell adhesion receptors
and cytoskeleton, cell migration in diseases

Department of Civil Engineering [Code CEZ]

Environmental Engineering: Urban air quality management; indoor air pollution; water and waste
water treatment; Emerging water contaminants (Nano particles, Antibiotics); urban water and
waste water Management; Non-point source Pollution; Membrane Biological Treatment Process;
Modeling, simulation and optimization of Environmental systems; Environmental Impact
Assessment; Human Health Risk Assessment; solid waste management; incineration waste-to-
energy; circulating fluidized bed operations; Landfill Management; Carbon sequestration;
sustainable development (Urban cities/growth centres); Environmental Risk Analysis, GIS and
Remote Sensing Applications for Environmental Management. Aerosol characterization, local and
regional air quality, climate change and health impact.
Geotechnical Engineering: Soil Mechanics and Foundation Engineering; Rock Mechanics, Rock
Engineering and Underground Structures; Rock Dynamics; Geo-environmental Engineering;
Landfills; Ash Ponds and Ash Utilization; Geotechnical Re-utilization of waste; Energy
Geotechnology; Slope Stability and Dams; Ground Improvement; Geosynthetics; Reinforced Soils;
Soil Dynamics and Earthquake Geotechnics; Foundations for Industrial Machines; Site specific
response studies; Engineering Geology; Seismic Hazard Analysis and Microzonation; Expansive
Soils; Geophysical Methods; Geotechnology for tracks and pavements; Blast and Impact Analysis;
Dynamic Behaviour of Tunnels and Slopes; Landslides in Static and Dynamic Conditions; Offshore
Geotechnology; Constitutive Modelling; Numerical Methods; Mechanics of granular materials;
Post- Geodisaster Reconnaissance Studies; Bioinspired Geotechnics.

Structural Engineering : Analysis and design of structures; tall buildings; bridges; Earthquake
engineering; wind engineering; offshore structures; masonry, RCC and steel structures;
Construction Management; Construction Technology; Concrete Technology; structural dynamics;
structural control; wave propagation; constitutive modeling; computational methods; modeling
of damage, plasticity and creep of concrete; durability of concrete; rebar corrosion; modeling of
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 41
cements; supplementary cementitious materials; use of marble, granite or other waste powder in
concrete; composites; high performance concrete; self-compacting concrete; financial analysis;
contract administration, quantitative methods in construction management; Infrastructure
Project Management Risk and Financial Management; sustainable construction, green building,
resilient infrastructure, design management, automation in construction; BIM (Building
Information Modeling) in construction projects; structural health monitoring; smart materials and
structures; meta material; tensegrity structures; biomechanics; engineered bamboo structures;
artificial intelligence; damage assessment and strengthening; microstructural modeling;
mechanics of composite materials; non-destructive testing and evaluation using ultrasound;
subsurface imaging using ultrasonic wave propagation; piezoelectric energy harvesting; radiation
damage; nanomechanics; multiscale modeling; fracture and failure modeling; mechanics of
glasses & disordered materials; atomistic modeling, machine learning.
Transportation Engineering : Transport planning; Transport policy; Transportation safety;
Construction work zone safety; Heterogeneous traffic flow modeling; Traffic safety and capacity
of hill roads; Mass transportation planning; Urban transport infrastructure planning and design;
Non-motorized transport planning; Modeling of pedestrian behavior; Activity-travel behavior
analysis; Network modeling; Transportation logistics and optimization; Traffic operations;
Geometric design of transportation infrastructure; Characterization of pavement materials;
Pavement design (flexible and rigid); Damage modeling of bitumen and bituminous mixtures;
Constitutive modeling of pavement materials; Recycling of civil infrastructure materials; Rheology
of asphaltic materials; Condition assessment of highway infrastructure; Pavement management
systems; Highway engineering; Airport infrastructure.
Water Resources Engineering : Hydrology in natural and urban environment; Hydrological
modeling and simulation; Stochastic processes; Data mining in hydrology; Flood forecasting and
modeling; Snow and glacier hydrology; Snow dynamics; Hydroclimatology; Climate change effects
in water resources; Watershed modeling; Large river basin modeling; water resources systems,
planning and management; Water allocation; Water resources conflicts; Irrigation management;
Flow through porous media; Groundwater modeling; Ground water contamination & remediation;
Contaminant transport modeling; Leachate pollution; Bioremediation; River water quality
modeling; Environmental impact assessment of water resources projects; Surface and subsurface
drainage; Hydraulic structures; Sediment transport; Application of numerical methods, CAD, FEM,
GIS, and Remote sensing in Water Resources Engineering. Slurry Pipeline, CFD modeling of
Multiphase flows, Economic Analysis of water resources projects; Anomalous Hydro Dynamics;
Transport Phenomena.

Department of Chemical Engineering [Code CHZ]

Catalysis and reactor engineering, Multiphase flow & rectors, Control of reactors, Petroleum
refining engineering, Computer Aided Design, Computational fluid dynamics, Microfluidics,
Hydrodynamic, instability, Particle technology, Mixing, Fluidization, Distillation and other
separation processes, Complex fluids, Interfacial engineering, food, Polymers, Polymer rheology,
Membrane synthesis & processes, Biomass, Bioseparations and Bioprocessing, Process operations
planning and scheduling, Biosimilars, Quality by design, Protein characterization, Colloids, and
interfacial science, Nanotechnology, Biosensors, Renewable energy, Biorenewable Chemicals and
Solid Oxide Fuel Cells, Electrochemical process, Hydrogen fuel cells, Lithium-ion batteries,
Electrochemical modeling Supercapacitor, Electrochemical energy storage Devices, Flow batteries,
Therapeutics, Drug delivery, Waste management, Environmental engineering, Aerosols, Air
Pollution, Process systems engineering, Model Predictive control, Process monitoring, Application
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 42
of machine learning in chemical process modeling and control Structural Bioinformatics, Polymer
Informatics, Computational material design, Density Functional Theory and Molecular Dynamics
Simulations.

Department of Computer Science & Engineering [Code CSZ]

Algorithms and Complexity Theory: Algorithmic graph theory, Computational geometry,
Randomized algorithms, Approximation algorithms, Complexity theory, Online algorithms and
Cryptography.
Artificial Intelligence (AI) and Machine Learning (ML): Reinforcement learning and AI planning,
Neuro- symbolic ML, Probabilistic graphical models, Statistical relational learning, Extreme
classification, Embodied artificial intelligence, Ethical AI, Fairness and reliability in ML, Privacy
issues in ML, ML for graphs, ML applications to healthcare, AI for crowdsourcing, Knowledge-based
AI, Computational advertising, AI for robotics.
Natural Language Processing (NLP): Intelligent information systems, Information extraction,
Question answering, Dialog systems, Knowledge-base completion, Neural architectures for NLP.
Databases and Data Analytics: Intention mining, Policy driven databases, Information retrieval,
Information dissemination in social networks, Semantic web data management, Opinion mining,
Indexing and querying in graph databases, Spatio-temporal data analytics, Data wrangling.
Architecture and Embedded Systems: Hardware-software co-design, Embedded systems design,
Reconfigurable computing, Fault-tolerant computing, Hardware implementations, Temperature-
aware architectures, Energy-efficient architectures, Design-for-debug, Cache memory, 3D and
non-volatile memory, Architectural extensions for mobile security, Architectures for machine
learning, Architectures for computer vision, Secure architectures.

Graphics and Vision: Computer graphics, Virtual reality, Computer vision, Digital image and video
processing, Mobile multimedia, Embedded computer vision, Robotic vision, Medical image
analysis.
Computer Networks and Distributed Systems: Mesh networks, 4G LTE/ WiMAX, Cognitive radio,
Cellular network measurements, Wireless networks, Network security, Operating systems
security.
Programming Languages, Semantics and Verification: Programming language semantics, Theory
and practice of concurrent systems, Process algebras, Distributed computing, Program analysis
and verification, Logic in computer science, Applications of verification in network models,
multiprocessors, and relaxed memory models and Language-based security.
Operating Systems, High Performance Computing and Systems Software: Compiler design,
mobile operating systems and device drivers, Virtualization and Operating systems for IoT system
Information and Communication Technologies for Development: Poverty mapping,
Urbanization, Bias in mass media, Computer systems for less-literate populations, Content
distribution in rural areas, Community radio, Community media, Mobile health, Governance and
accountability.
Neuroinformatics and Medical informatics: Brain Imaging, Functional MRI (fMRI),
Electroencephalography (EEG), Near- infrared spectroscopy (NIRS), Human Functional
Connectome.
Cyber Security and Secure Information Systems: Formal notions of security, Formal verification
for security, Language-based security, Secure architectures and Embedded systems, Network
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 43
security, Blockchain-based systems, Privacy and data protection, Electronic voting, Digital identity.

Department of Chemistry [Code CYZ]

Asymmetric Synthesis, Catalysis (Asymmetric, Nano, Photo-Redox, Electro, Bio, Homogeneous,
Heterogeneous), Carbohydrate Chemistry, Chemistry of Peptides, Synthetic & Mechanistic
Organic Chemistry, Total Synthesis of Bioactive Natural Products, Organo-fluorine Chemistry,
Supramolecular Chemistry, Biochemistry (Enzyme Technology, Microbial Biochemistry,
Fermentation & Bioremediation, Cloning & Proteomics, Nucleic Acid Biochemistry), Bio-
Inorganic Chemistry, Bio-Organic Chemistry, Bio-Physical Chemistry, Physical-Organic Chemistry,
Polyoxometalate Chemistry, Organometallic and Main Group Chemistry, Coordination
Chemistry, Molecular Magnetism, Small Molecule Activation, Metal-Organic Frameworks,
Inorganic Polymers, Solid State Chemistry, Fluorescence Spectroscopy (Ensemble & Single
Molecule), Vibrational Spectroscopy & Imaging, NMR Methodology, Porphyrinoids, π-
Conjugated Organic Materials, Molecular Solids, Modern Battery Electrolytes, Nanomaterials
(Optical Properties, Photovoltaics, Biological), Electrochemistry, Green Hydrogen, CO2
Reduction, Energy Storage, Water Splitting, Artificial Photosynthesis, Energy & Environment,
Surface Chemistry, Quantum Crystallography, Quantum & Classical Computer Simulations on
Chemical & Biological Systems, Theoretical Chemistry, Computational Chemistry, Artificial
Intelligence and Machine Learning for Chemists.

Department of Design [Code DDZ]

Age-friendly Built Environments; Analogical design (including Biologically-inspired Design);
Animation; Artificial Intelligence in Design; Augmented, Virtual and Mixed Reality; Behavioural
Design (Methodology and Methods); Comics Studies; Computer Aided Design and Manufacturing;
Computer Graphics; Craft Practices; Creativity in Art & Design; Data-driven Design for
Environmental Health; Data Science and Design; Design & Culture; Design Cognition and
Behaviours of Designers; Design for Children’s Education; Design for Development/Base of the
Pyramid; Design for Environment; Design for Health and Wellness in Built Environment; Design for
Industry 4.0; Design for IoT for Environmental Health; Design for Product Life-Cycle; Design for
Sustainability; Design for Sustainable Behaviours (Health, Environment and Socially Responsible
Design); Design for Wellness; Design of Assistive Technologies; Design of Healthcare
Environments; Design of Sustainable Habitats; Design Theory & Methodology; Digital Heritage;
Environmental Ergonomics; Film Making; Graphic Design; Healthcare Design; Human Factors &
Ergonomics; Immersive Media Design in Education; Inclusive Mobility; Industrial Design; Packaging
Design; Product Design; Qualitative Research Methodologies; Sedentary Behaviour and Health;
Study of Creative & Aesthetic experiences from Perspectives of Philosophy, Psychology,
Phenomenology & Cognitive Neuroscience; Universal Design; Usability; User Experience; Visual
Communication; Visual Narratives; Playful and experiential learning, Serious games (for health,
citizen science or behaviour change), design for marginalized populations.

Department of Electrical Engineering [Code EEZ*]

Applicants from any STEMM (science, technology, engineering, mathematics, and medicine)
discipline are considered.
Materials, Devices, Circuits and Systems Engineering: a) Logic, memory and VLSI: CMOS
technology and VLSI design, device modeling, simulation and characterization, CAD for VLSI
device fabrication and reliability, compact modeling and PDKs, memory devices and architecture,
logic device design, neuromorphic computing and NVRAM technology, semiconductor process
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 44
technology and packaging, machine learning,; b) Sensors, detectors and photonics: sensor and
photonic materials, biosensors, fiber-optic and chip based optical sensors, CMOS image sensors
and vision systems, NIR/SWIR/MWIR/LWIR detectors, pressure sensors, measurement and
instrumentation, plasmonics, nanophotonics, photonic and optoelectronic materials and devices,
LEDs and solid state lighting; c) MEMS, Sensors and Bio-electronics: bio-inspired devices and
system design, MEMS devices (RF MEMS, BioMEMS, Neuromorphic MEMS, acoustic MEMS),
electromagnetics, microfluidics and microplasmas, nanorobotics, flexible electronics,
transducers; d) Analog, Digital and Mixed Signal Circuits: low-power analog design, analog and
mixed signal circuit design, high speed circuit design, RF and cryogenic circuit design; e) Nano and
Quantum Technology: nanoelectronics, quantum electronics, quantum computing, quantum and
functional materials, spintronics and micromagnetics; f) Energy and Power Devices: energy
harvesting, wireless power transfer using piezoelectric, magnetic devices, photovoltaics,
batteries and supercapacitors, and power semiconductor devices.
Power Engineering: Electric machines and drives - Electric machine design, control and converter
design, Power electronics - converter topology, multilevel converters, magnetic component
design, Wide Band Gap device converter design, Wireless power transfer, Electric vehicles
machine design, Electric vehicle charging converters, High power Fast EV Chargers, Grid forming
converters, Large-scale Battery storage system and their control. Power systems - Protection,
stability, optimization, power quality, HVDC & FACTS, Computer applications - development and
design of control platforms, CAD software for system development, Renewable energy systems-
Solar, wind, micro hydro Electric vehicle, Smart grid, Electricity markets.
Communication Engineering: Signal Processing, Speech and Image Processing, Coding &
Information Theory, Information Security, Communication Systems, Optoelectronics, Optical
Communications, Communication Networks, Wireless and Mobile Communications, 5G and 6G
Technologies.
Computer Technology: Computer Vision, Multimedia Systems, Image Processing, Computer
Networks, Computer Architecture, Embedded Systems, Mobile computing, soft computing,
Pattern Recognition, Artificial Intelligence, Machine learning, Information Technology, Music
information retrieval, Bioinformatics, Braincomputer interface, Natural language processing,
Biomedical signal/image processing, Computational neuroscience, Swarm intelligence, Internet
of things.
Control Engineering: Robust Control, Intelligent Control, Robotics, Optimal Control, System
Identification, Neuro-Fuzzy Control, Reinforcement Learning Control, Nonlinear Systems and
Control, Dynamical Systems, Applications to Biomolecular Circuits, Flight Control and Navigation,
Adaptive Control, Cooperative Control and Path Planning, Sensor Fusion, Guidance, Navigation
and Flight Control, Sliding Mode Control, Interval Analysis in Control Design, Computational
Methods, for Simulation and Control, Modeling and Model Order Reduction, Attitude Control and
Structural Control, Numerical Modeling and Simulation Embedded Control System.

*
Full-time applicants with UGC (JRF), CSIR (JRF) and other government funded fellowships (OGF) will also be considered. Applicants must have a
minimum of four-year education after 12th standard with degree in science, engineering or medicine (B.Tech/M.Sc./BE/BS/MBBS) or equivalent.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 45

Department of Energy Science and Engineering [Code ESZ]

Internal Combustion Engines, Thermal Engineering, Solar Thermal, Power Systems, Power
Electronics, Machine Drives, Control System and Devices, Instrumentation and Control, Solar
Photovoltaics, Wind Energy, Hydro Power, Plasma Science and Technology, Nuclear Engineering,
Energy Conservation and Management, Bio-Energy, Water Resources Engineering, Turbo
Machinery, Functional Materials, Building Design and Energy Management, Computational Fluid
Dynamics (Thermal Fluids), Fuel cell Systems, Energy Storage and supercapacitors, Fuels and
Combustion Science, Material Science.

Department of Humanities & Social Sciences [Code HUZ]

Literature, Sociology, Psychology, Linguistics, Philosophy, Economics, Psychology (Cognitive
Neuroscience), History.
Note: Candidates must refer to the Department website (http://hss.iitd.ac.in/areas) for details
on areas of specialization in which applications will be considered.

Department of Mathematics [Code MAZ]

Algebra, Cryptography, Numerical Linear Algebra, Number Theory and Combinatorics, Dynamical
Systems and Fractals, Topology, Algebraic Topology, Harmonic Analysis, functional Analysis,
Operator Theory, Micro Local Analysis, Numerical Analysis, Partial and Stochastic Differential
Equations, Algorithms and Graph Theory, Machine Translation, Applied Probability, Stochastic
Modeling, Queueing Theory, Optimization, Game Theory, Financial Mathematics.

Department of Mechanical Engineering [Code MEZ]

Design Engineering: Mechanical Vibrations, Rotor Dynamics, Smart structures, Experimental

Modal Analysis & Identification, Structural Dynamic Modification, Finite Element Model Updating,
Acoustics and noise control, Active control of sound and vibration.
Condition Monitoring and Fault Diagnosis, Bearing Dynamics, Lubrication, Polymer Tribology, Bio-
tribology; Precision Machine Design, Computer Aided Mechanical Design, Computer Controlled
Mechanisms, Vehicle Dynamics, Modelling the Impact of Vehicles, Mechanisms, Robotics
(including Medical Robotics), Medical Devices/instruments, Multibody Dynamics, Design and
analysis of Rural Engineering Systems, Mechatronics, Sensors and Actuator Design, MEMS,
Design of Microsystems, Artificial Intelligence Applications Computational Mechanics, Fracture
Mechanics, Fatigue & Failure analysis, Composite Mechanics, Impact Mechanics, Nanomechanics,
Experimental solid Mechanics, Impact Biomechanics, Tissue biomechanics, Orthopaedic
Biomechanics, Implant Design, Musculoskeletal modelling, Gait and Motion Analysis.
Thermal Engineering: Design and analysis of thermal systems/processes based on fundamentals
of thermodynamics, fluid mechanics, heat and mass transfer, and combustion through
experimental / analytical / computational methods.
The specific research areas include the following: Phenomenological and multi-dimensional
modelling of IC Engines, Combustion systems, Clean coal technologies, Biomass gasification and
char-making, Air pollution characterization and remediation, Microfluidics, Fluid mechanics of
biologically inspired flyers, Fluid dynamics and heat transfer in biosystems, Inverse heat transfer,
Multiphase flows, Phase-change processes, Heat and mass transfer in drying of porous media,
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 46
Turbomachinery including compressors, steam/gas/hydel turbines, micro and pico-scale
turbomachines, Rural energy systems, Thermal comfort, Refrigeration and air conditioning, Solar
cooling, Thermochemical reactions for heating and cooling, Energy efficient buildings, Advanced
controls of thermo-fluid systems, AI/ML for design of thermal systems, Water purification and
desalination, Thermal energy storage, Lithium-ion batteries, AI/ML methods for electric vehicle
health estimation.
Production Engineering: Metal Cutting, Metal Forming, Welding, Metal Casting, Material
Characterization, Nontraditional Manufacturing Processes, Measurements & Metrology, Grinding
of Ceramics and Metal Matrix Composites, Processing of Polymers & Composites, Injection
Moulding, Microcellular Injection Moulding, Finite Element Applications in Manufacturing,
CAD/CAM, Rapid Prototyping, Intelligent Manufacturing, Micro & Nano-Manufacturing,
Biomaterials and Medical Implants, Nanocomposites, Modelling of Material Behaviour, Lean
concepts in Machine Tool Design. Manufacturing Automation, Magnetorheological Finishing,
Additive manufacturing, Laser material processing, Auxetic metamaterials, Ballistic Materials and
Manufacturing of High-Performance Composites, Diamond brazing, joining of ceramics to metals,
Microstructural Evolution, Development of cutting tools, Coating Technology.
Industrial Engineering: Public Systems, Quality, Reliability and Maintenance, Lean Manufacturing,
Agile Manufacturing, Productivity Management, Operations Management, Project Management,
Supply Chain Management, Flexible Systems, Healthcare Systems, Intelligent Manufacturing
Systems, e-Business, Reverse Logistics, Financial Engineering, Wireless Systems; Operations
Research, Applied Probability Models, Decision Support Systems, Linear and Nonlinear
Optimization, Combinatorial Optimization, Simulation, Machine Learning and Data Analytics,
Simulation Modelling, Heuristic Optimization, Multi-agent Planning.

Department of Materials Science and Engineering [Code MSZ]

▪ Metals, Glass and Ceramics: Structure-property correlation in advanced materials,
Fracture and Fatigue, Indentation, nano-scale friction and wear, Material
characterization using advanced microscopy, phase transformations, solid-state
diffusion-controlled reactions, Synthesis and characterization of metal matrix
composites, Light metals and alloys, 3D printed metals and alloys, Auxetic materials,
Bulk metallic glasses and composites, functionally graded materials, nanomaterials.
High entropy alloys, materials for extreme environments, thermal barrier coatings,
alloy processing and properties, refractory metals and compounds, aluminide bond
coats. Advanced ceramics, optical glass, toughened and tempered glass, structural
and functional ceramics, and glass-ceramics.
▪ Polymers: Synthesis of polymers, structure-property correlation in polymers,
rheology and processing of polymers, functional and smart elastomeric materials,
polymer matrix composites, tribology and mechanical behaviour of polymers, 3D
printing of functional elastomeric/polymeric materials, membranes for various
applications, antifouling and antibiofouling materials and membranes, redox
polymers, materials for energy storage, separation and purification, organic-
inorganic hybrid materials, catalytic materials and nanomaterials for catalysis and
environmental applications, 2D materials, graphene, Covalent organic frameworks,
biodegradable materials and biomaterials, organically modified mesoporous silica
nanoparticles, surface engineering using controlled radical polymerization
techniques, recycling of materials, 3D printing.
▪ Computational Materials Science: First principle-based materials design,
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 47
micromagnetic simulations, computational materials chemistry, molecular
modelling, and simulations of soft materials (self-assemblies, (bio)polymers,
nanomaterials), machine learning for materials informatics, Computational materials
science, Optoelectronic Materials, Ion Dynamics, Machine Learning, Spintronics,
Low-Dimensional Materials.

▪ Functional Materials: Functional-electrical, optical and magnetic properties of

materials. Conventional semiconducting materials processing and device
applications. Low dimensional materials, Layered 2D materials, nanostructures
devices and physics. Nanowires - Magnetic tunnel junctions. Photo voltaic in organic
and inorganic materials. Low temperature electron transport, ballistic transport,
superconductivity and other strongly correlated systems. Micro and Nano electro-
mechanical device fabrication and characterization, modeling and simulation.
Electron transport, opto-electronics in oxide and other wide bandgap materials

Department of Physics [Code PHZ]

Astronomy and Astrophysics:
The research in Astronomy and Astrophysics at IIT Delhi encompasses a wide range of topics,
including Classical and Quantum Aspects of Gravity, Cosmology, Galactic Astronomy, Solar
Physics, and Relativistic Quantum Information. Through interdisciplinary approaches and
advanced theoretical and observational techniques, we strive to push the boundaries of our
understanding of the universe. Our current research interest are -
Classical and Quantum Gravity : Small Scale Structure of Spacetime, Quantum effects in Gravity,
Cosmology, Numerical & Mathematical Relativity; Galactic Astronomy : Probing galaxies and
the circumgalactic medium; Relativistic Quantum Information : Decoherence, Quantum-to-
Classical Transition, Quantum Computing; Solar Physics : Solar corona - Instrumentation,
Imaging, Data Processing and analysis, and Physics

Atomic and Molecular Physics: Our area of interest is ion-atom/molecule/cluster/ices

collisions. Heavy ion impact Ionization and fragmentation of the molecules of biological and
astrophysical interest are studied. Our area of expertise include secondary electron
spectroscopy, recoil-ion-momentum spectroscopy and Infrared spectroscopy. We are also
interested in development of equipment which are useful in atomic physics experiments and
our aim is to collaborate with the industry to make them commercially available.
Condensed Matter Experiments:
The research activity of condensed matter experimental (CME) group at the Physics Department
covers a wide range of topics such as (i) nanostructured materials, thin films and devices, (ii)
novel magnetic multifunctional and topological materials, (iii) spintronics and magnetism, and
(iv) wide band gap semiconductors such as GaN and Ga2O3, AlGaN/GaN heterostructures, 2D
quantum materials like graphene, transition metal dichalchogenides and thin-films of half
Heusler alloys Growth and nanoscale devices based on semiconductor nanowires, and (v)
optical properties of condensed matter e.g., ultrafast dynamics of condensed matter with
femtosecond laser. CME group houses several specialized laboratories as well as several
departmental facilities. The CME group has close links with Central Research facilities (CRF) and
Nanoscale Research Facility (NRF) of the Institute. NRF houses Class 100 and 1000 clean rooms
as well as several characterization facilities. At present, the department has an X-Ray
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 48
diffractometer (XRD), a SQUID magnetometer,
a Physical Property Measurement System (PPMS), ultrafast-optics laboratory (also housing a
Raman spectrometer and a photoluminescence set-up), a Pulsed Laser Deposition (PLD) system
and an Atomic Force Microscope (AFM) as departmental facilities. Individual research labs also
have several state-of-the-art facilities, the details of which can be found by visiting the
corresponding laboratory web pages.
Condensed Matter Theory:
The CMT group has an interdisciplinary focus with broad research interest spanning from first
principles-based simulation of designing new materials and understanding their properties
using “state-of-the-art density functional theory (DFT) and beyond methods” to the theoretical
modelling of transport and other properties of various condensed matter systems. We also
theoretically model transport in quantum Hall systems, graphene, and topological insulators.
Theoretical modelling of twisted van der Waals heterostructures (dubbed as Twistronics) and
moiré materials are other research activities in this direction. Quantum simulation of exotic
condensed matter phases with ultra-cold atoms is another area of expertise. Our research also
aims to theoretically discover and characterize different topological phases consisting of
fractional fermions and Majorana fermions with features uniquely advantageous for topological
quantum computing. Using DFT we probe the fundamental physics and related technological
applications for atomic and many-atomic complex systems. Some properties of our interest
include electronic and band structure, electric and magnetic properties, phonons, magnons and
electromagnons in complex (anti) ferroic oxides bulk and nanostructures. We also use ab initio
calculation to explore the viability and rational design of real-world functionalized CNT
metastable photoswitches and single-photon emitters (SPEs). We also theoretically model
transport in quantum Hall systems, graphene, and topological insulators. Quantum simulation
of exotic condensed matter phases with ultra-cold atoms is another area of expertise. Our
research also aims to theoretically discover and characterize different topological phases
consisting of fractional fermions and Majorana fermions with features uniquely advantageous
for topological quantum computing.
High Energy Physics (https://hep.iitd.ac.in):
High energy physics encompasses both the very small and the very large distance scales — from
the femtometer scale or smaller (elementary particles) to the scale of the observed universe
(cosmology). Small scales are well described by the Standard Model, which brings together
three fundamental interactions — electromagnetic, weak and strong — while cosmology is
concerned with the gravitational force. We study particle production in particle collider
experiments in an attempt to understand both perturbative and non-perturbative aspects of
the Standard Model interactions. In particular, strong interactions, described by quantum
chromodynamics, are per se notoriously difficult. We employ effective field theoretical
techniques to understand its non-perturbative aspects—to study low energy properties of
hadrons and quark gluon plasma—as well as perturbative techniques and phenomenology for
describing high energy phenomena of hadron structure and gluon saturation. We also study
particle production in gravitational fields and aspects of quantum gravity.
The Standard Model of Particle Physics is stupendously successful in explaining elementary
particle interactions. However, the presence of a few theoretical shortcomings and pieces of
experimental evidence, e.g., non-zero neutrino masses and mixing, demands physics beyond
the Standard Model (BSM). We explore these novel aspects in the context of neutrino physics,
dark matter, collider searches, and charged lepton flavour-violating decays. We also scrutinize
the feasibility of probing gravitational waves in BSM frameworks through Phase Transition,
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 49
which offers a particle physics probe of the history of the Universe.
We also conduct research in more theoretical and mathematical aspects of high energy physics,
including the holographic correspondence to better understand quantum gravity, and the
development of novel quantum spacetime models through discrete approaches inspired by
graph theory, number theory, and quantum information theory.

Optics and Photonics:

Historically the Physics Department at IIT Delhi has a strong background in broad areas of Optics
and Photonics. IIT Delhi started the first Optics Master's program in the country in 1960's.
Current research activities span a wide ranging topics that include areas of fundamental
importance (e.g. Physical Optics, Statistical Optics, Singular optics and inhomogeneous
polarization states, quantum photonics, non-linear optics, nano-photonics, metamaterials, light
propagation in random media) as well as cutting edge applied research areas (e.g. integrated
optics and optical communication, holography, microscopy/nanoscopy, optical metrology,
computational imaging, green photonics, illumination engineering, bio-photonics including
applications to medical diagnostics, THz optics, ultrafast optics, spectroscopy, optical tweezers,
beam engineering, atmospheric optics and development of optical sensors). Optics and
Photonics faculty have number of collaborations across different disciplines within IIT Delhi
(electrical engineering, biosciences/biomedical engineering, material science, chemistry), as
well as outside IIT Delhi with DRDO, ISRO and other national research facilities like CSIR labs, as
well as medical schools/hospitals (e.g. AIIMS), and industry. The department hosts a DST-FIST
facility on ultrafast optics that has state-of-the-art instrumentation enabling collaborative work
with various disciplines.

Physics of Quantum Materials & Information Systems:

The three focussed attempts in quantum computation (QC) are- (i) Majorana-based topological
quantum computation (TQC) (ii) superconducting qubits-based QC and (iii) trapped ion-based
QC. Importance of the field is evident from the fact that Google and IBM have invested heavily
in superconducting qubits while Microsoft has invested in Majorana qubits. The focus of our
Department are towards (i) cold atom-based quantum technologies, (ii) quantum photonics and
(iii) general Quantum Materials like Topological Insulators, quantum well based semiconductor
technologies, spintronics related research etc. In cold atom-based technologies, the atoms are
cooled to a million times colder than room temperature using precisely frequency tuned lasers.
The inherent quantum nature of atoms and photons allows one to design versatile quantum
systems and fully control their properties by simple and clever approaches. These technological
and conceptual developments will lead us to build large scale quantum information processing
network, quantum computation protocols for solving industry and society relevant problems.
A group of researchers, in the department are putting their efforts in the direction of studying
Topological semi-metals, a quantum phase of matter that host Dirac and Weyl fermions. They
study the transport properties of these exotic materials under very low temperature, high
magnetic field and high pressures and realise the exotic quantum features in the laboratory
scale.

Plasma Physics:
Plasmas are known as the fourth state of matter and constitute the majority of the visible
universe, including the Sun. A plasma contains a large number of positive ions and electrons in

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 50
almost equal numbers, along with some neutral particles, and are overall charge neutral. There
are examples where a plasma may also contain negative ions and/or negatively charged dust
particles, which is referred to as a multi-component / dusty plasma. Each plasma species can
contribute to different applications of plasmas. For example, electrons are responsible for high-
frequency phenomena, including EM radiation generation, whereas the ions contribute to the
synthesis of materials, surface hardening, sputtering, device fabrication, etc. We are primarily
working in the broad research areas of intense laser-plasma interactions, plasma-material
interaction, plasma-based charged particle acceleration, plasma propulsion, plasma-based
radiation sources, and dusty plasmas. We employ theoretical as well as numerical methods,
namely, hydrodynamics, molecular dynamics, and particle-in-cell (PIC) techniques, to
investigate the above areas and also perform experiments in some of the areas.
Statistical Physics and Soft Matter:
Statistical Physics is devoted to understanding macroscopic assemblies of identical particles.
Such systems appear over a wide range of length scales in many different fields. We study
diverse systems of contemporary interest, ranging from classical solids, exotic liquids, soft
materials, mesoscopic systems, active matter and granular matter to name a few. Broadly, our
research encompasses the following themes: (i) emergent phenomena in complex spin systems
with disorder and long-ranged interactions; (ii) non-equilibrium properties of complex fluids
such as liquid crystals, ferronematics, living liquid crystals, magnetic fluids; (iii) Colloidal self
assembly; (iv) Stochastic processes, stochastic thermodynamics of active Brownian heat
engines, active matter, optimal control of cyclic heat engines, population dynamics and open
quantum systems; (iv) Motility of microorganisms on surfaces, micro-swimmers in Newtonian
and non-Newtonian fluids; (v) Driven and active granular matter; and (vi) Capillary and
elastocapillary phenomena. We use a variety of analytical techniques from equilibrium and non-
equilibrium statistical physics, computational techniques such as Monte Carlo, parallel
tempering, molecular dynamics and graph cuts, along with experiments involving state-of-the-
art imaging and rheological measurements, often using in-house developed techniques.

Department of Management Studies [Code SMZ]

Economics: Managerial Economics, International Economics, Productivity and Efficiency Analysis,
Business Forecasting, Economic Feasibility & Techno economic Analysis, Sustainable
Development, Socio-economic Analysis, Energy Economics, Econometric Methods and
Applications, Macroeconomic Theory and Policy. Security and Information Risk, Merger and
Acquisitions, Big Data Analytics, Digital Economy, Development Economics, Public Policy,
Environmental Economies and Climate Change.

Finance: Financial Analysis and Valuation, Financial Management, International Financial

Management, Capital Markets, Derivative Securities, Portfolio Management, Mutual Funds,
Banking, Financial Markets and Services, Mergers and Acquisitions, Risk Management, Behavioral
Finance, Corporate Governance, Corporate Social Responsibility, Supply chain Finance,
Entrepreneurial Finance.

Human Resource Management: Organizational Behaviour, Ethical Decision Making,

Whistleblowing, Ethical leadership, Organization Management and Change, Organization
Development, Human Resource Management, Career Management, Flexible Work
Arrangements, Workplace Deviance, Workplace Incivility, Gig work and workers, Identity work.

Information Systems: Adoption, Impacts and Management of Emerging ICTs; Data Science;
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 51
Artificial Intelligence and Machine Learning; Social Media and Web 4.0; Digital Transformation;
Smart Cities; ICTs, Development and Business; E-Commerce & M-Commerce; Sharing / Platform
Economy; e-Governance; Digital services management; Cyber Security, Privacy and Information
Risk Management; Public Policy for Emerging Technologies; Blockchain; Internet of Things;
Financial Technologies; Healthcare technologies, Metaverse, Digital Public Infrastructure and
Digital Public goods.

Marketing: Marketing Management, Industrial and Hi-Tech Marketing, Advertising, Sales

promotion, Product Management, Market Research.

Operations: Production, Management and Operations research, Sustainable and Big Data
Operations, International Manufacturing Network, Enterprise Resources Planning, Project
Management, Modeling and Simulation of Operations, Healthcare Operations System Analysis,
Total Quality Management, Logistics Management, Modelling and Simulation Closed Loop
Systems, Industrial Waste Management, Supply Chain, Big Data Analytics, Deep /Machine
Learning, AI Implications, Sustainable Humanitarian Supply Chain Solution and Green Packaging.

Strategy: Strategic Management, Strategic Innovation, Strategic Thinking, Corporate Strategy,

Public health, Management of Technology, International Business, Ambidexterity, Strategic
alliance and Joint ventures, Flexible Systems Management, Strategic Implementation.

Department of Textile and Fibre Engineering [Code TTZ]

Textile Engineering: Design and analysis of yarn and fabric formation systems: rotor spinning, ring
spinning, air jet spinning, friction spinning, weaving, knitting, nonwovens, braiding etc. ; Structural
mechanics of textiles; High stress elastic materials; Apparels and garments; comfort; handle and
other functional aspects of fibrous assemblies; Design and development of technical textiles: geo-
textile, filter fabrics, medical textiles, protective textiles, textile composites etc.; Systems analysis;
Textile production and marketing: operation management and supply chain managements; Textile
production and operations management, supply chain management; Sustainability and circularity;
Textile Instrumentation and machine development; Modeling and simulation of textile processes
and products; Quality management.
Textile Chemical Technology: Textile chemical processing; preparatory processes; dyeing, printing
and finishing, Surface functionalization by plasma and UV excimer lamp; Micro and nano-
encapsulation; Conducting textiles; Natural dyes; Bio-active textiles; Textile ecology and
environment.
Fibre Science & Technology: Synthesis and characterization of advanced polymeric materials;
Fibre formation processes; Modeling and simulation; Structure-property correlation; Functional
and responsive polymers; Smart & intelligent textiles; Modification of natural and synthetic fibres;
Nanotechnology in textiles: nanofibres by electrospinning, nanomaterials; Synthesis and
application in textiles; Coated textiles; Polymer nanocomposites; Green Composites; Medical
textiles, Tissue engineering; Sustainability and polymer & fibre recycling; 3D Bioprinting; Wearable
electronics: Conducting fibres, piezoelectric materials, Supercapacitors, batteries etc.

Centre for Applied Research in Electronics [Code CRZ]

Signal Processing: DSP Algorithms and Systems, Underwater and Air Acoustics, Speech and Audio
Processing, Machine Learning, Optimization for Signal Processing, Digital Communications, Multi-
Sensor Data Fusion;
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 52
Microwaves and RF: Active and Reconfigurable Circuits and Antennas, Millimeter Wave and T Hz
circuits and sub-systems, Microwave imaging; RF MEMS, Wideband Microwave Circuits, Modeling
of Active Devices;
Microelectronics: Micro-Electro-Mechanical Systems (MEMS) Technology, Nanoelectronic
Devices, Optoelectronic & Quantum Sensors, CMOS Device & Circuit Design, GaN HEMT Design &
Modeling, Magnetic/spintronic and neuromorphic devices.

Centre for Atmospheric Sciences [Code ASZ]

Mesoscale Modelling: Numerical Modelling of the Atmosphere, Tropical Meteorology and Indian
Monsoon, Land-Surface Process Modelling, Land-Atmosphere Interaction, Renewable Energy
Resource Assessment and Forecasting.
Numerical Modelling of Weather and Climate: Numerical Methods for Weather and Climate
Models, Numerical Modeling of the General Circulation of Atmosphere and Advection of
Atmospheric Tracers.
Ocean Modelling: Ocean Circulation Modelling, Ocean State Simulations and Forecasting, Storm
Surges and Inundation, Coastal Ocean Processes, Simulation of Ocean Surface and Internal Waves.
Climate and Climate Change: Global and Regional Climate Modeling, Climate Dynamics, Climate
Variability and Changes, Climate Change Detection and Attribution, Climate Projections, Climate
Change Impacts, Science of Extreme Weather and Climate Events, Health, Agriculture, Water
Resources and Energy, Aerosol-Cloud- Climate Interactions, Greenhouse Gas-Vegetation
Interactions, Paleoclimate, Proxy Reconstructions, Abrupt Climate Change.
Air Pollution: Urban Meteorology, Chemical Transport Modelling, Health Impact Assessment of
Air Pollution, Greenhouse and Trace Gases Modelling, measurements of aerosols and
greenhouse/trace gases.

Centre for Automotive Research and Tribology [Code CTZ]

AC/DC Charger, Solar-powered charger, Charging Protocols, Effect of Charging on Grid, Motor and
Drives for EVs, Hybrid Electric Vehicles, Aircraft power system, Battery for EVs, Battery materials,
Vehicle Telematics, Applied dynamics and vibrations, Rotordynamics, Hysteresis, Tire mechanics,
Vehicle stability, Vehicle nonlinear dynamics and control, Autonomous and Connected Vehicle,
Tribodynamics, Tribological and acoustical materials, Automotive Fault Diagnosis and Prognosis,
Noise Control Materials, Automotive NVH, Sound Quality and Application of Machine Learning in
Condition Monitoring.

Centre for Biomedical Engineering [Code BMZ]

Electrical/ Electronic/ Instrumentation Engineering; Mechanical/ Manufacturing/ Production
Engineering; Chemistry/ Biochemistry/ Polymer Chemistry/ Material Sciences/ Pharmaceutical
Sciences; Chemical Engineering; Mathematics/ Physics/ Bio-Physics; Computer Science
Engineering; Biomedical Engineering; Biotechnology, MBBS/ BDS/ Homeopathy (B.H.M.S)/
Physiotherapy (BPT))/ Veterinary Sciences.

Centre for Rural Development and Technology [Code RDZ]

Artisan technologies and rural industries; Water & sanitation; Rural housing & habitat; Traditional
knowledge systems; Frugal innovation; Rural entrepreneurship; Design for sustainability; Rural
energy systems;; Embodied energy & Carbon footprint; Biofuels, SYN Gas, Biogas production &
enrichment; Compressed Biogas (CBG) Biofertilizers & biopesticides; Biomass production and
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 53
valorization; Green chemistry and materials; Environmental microbiology & bioremediation;
Microbial Biochemistry and enzymology; Algal technologies; Natural plant products processing;
Applied secondary metabolites; Agro-food processing, storage & value addition; Food
fortification, food safety quality, and measurement techniques, 3D Printing of biological materials;
Protein biochemistry; Isolation, encapsulation & value addition of bioactives; Clean cookstoves;
Solid & liquid waste management; Wetland reclamation; Clean & sustainable technologies;
Natural fibre products; Environmental impact assessment; Natural resource Management;
Medicinal mushroom production technologies; Panchagavya – processes, validation & standards;
Application of block chain, AI, ML in agri foodtechnology; Nanotechnology & Nano toxicology in
agriculture; Indigenous people (especially remote & peripheral communities) & development;
Environment & sustainable development; PVTGs; Governance & governmentality studies;
Andaman and Nicobar islands, Leh-Ladakh, Jammu & Kashmir, and northeast India.

Centre for Sensors, Instrumentation and Cyber-physical Systems Engineering [Code: IDZ]
Sensors and Transducers; Electronic and optical sensors; Electronic Components and Circuits;
Electronic circuit design (analog and digital); Electronic Techniques for Signal Conditioning and
Interfacing; Signal and Image processing; CMOS analog and mixed signal circuits & systems for
sensors; Optical Metrology; Micro-optics; Aspheric and freeform optics; Optical instrumentation;
Holographic microscopy; Digital speckle pattern interferometry; Optical coherence tomography;
Display Devices and Technology; Quantum optical devices; Integrated quantum technologies;
Optical image processing; Machine Vision and Automation; Signal, Image and Video Processing
Techniques for Non-destructive Testing; Tera Hz, InfraRed, X-ray, and Ultrasound
Imaging Modalities; Precision Measurement Systems; Precision mechanics; Instrumentation and
Control; Instrument Design and Simulations; Mechatronics; Embedded systems; Sensors Systems;
Smart Systems.

National Resource Centre for Value Education in Engineering [NRZ]

Holistic Health and Wellness. All issues pertaining to holistic view of individual’s health and
wellness. These include modern scientific research on proven mind-body techniques for physical
and mental health, such as Mindfulness, Yoga, Tai-Chi, Qi-Gong, Ayurveda, Holistic nutrition and
others. Yogic Neuroscience, Indian Psychology, Cognitive Sciences, Clinical trials on Yoga and
Ayurveda, fMRI-based Neuroimaging (fMRI), EEG, MEG, PET, fNIRS.
Leadership for Sustainable Development. Various aspects of holistic and sustainable
development. Notions of development which go beyond purely material well-being, and consider
other aspects of human/societal well-being such as intellectual, emotional and overall happiness.
Notions of development which encompass sustained co-existence among human beings as well as
with nature. How to create leadership (in various walks of life – especially in
engineering/technology) for taking forward these alternate views on development.
Inner Development. Understanding first person mental phenomena, especially those pertaining
to Meditation, Mindfulness and Contemplation in a rigorous academic framework. Theoretical
frameworks for alternative worldview based on deep contemplative insights. Teaching and
research on first person mental phenomena through accurate and reproducible observations.
Inner and Outer Harmony through Music and Arts. Classical music, dance and art forms that
promote introspection, concentration, various aspects of self-awareness and devotion. Evolution
of parallel streams of classical music in India. Development of classical art forms through folk art
forms. Societal awareness through classical music. Streams of thought in classical music.
Connections between 32ufism32c music and 32ufism. Technology-based analysis and
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 54
dissemination of music.
Value Education and Technology. Teaching the teachers, tools and techniques for inculcating
value education to students, especially at tertiary level of science and engineering. Research on
effectiveness of various techniques for value education. Newer models of education. Use of
technology for large scale dissemination of knowledge.

Transportation Research & Injury Prevention Centre [Code TRZ]

Transportation planning; traffic flow modeling, simulation, and optimization, public transport
systems; sustainable urban transport; travel behaviour modeling; pedestrian dynamics and
evacuations; construction safety and work zone safety; highway safety; vehicle crash modeling;
road traffic injury prevention; human body modeling and injury estimation; pedestrian and non-
motorized vehicle safety; freight modelling, road accident costing; network modelling; climate
change; human migration; driving simulators; vehicle dynamics; intelligent transport systems.

Optics & Photonics Centre [Code OPZ]

The newly established Optics and Photonics Centre aims to foster an interdisciplinary environment
where students and researchers with diverse backgrounds will explore new frontiers in Optics and
Photonics with equal emphasis on fundamentals as well as device development.
Research topics of the Centre are in areas of Optical Engineering, Optical Instrumentation and
Metrology, Optical Imaging, Fiber Optics, Integrated Optics, Optical Sensors, Laser Science and
Technology, Ultrafast Optics, Silicon Photonics, Nanophotonics, Plasmonics, Biophotonics, Green
Photonics, Statistical and Quantum Optics, Quantum Photonics, Terahertz Photonics, Optical
Metamaterials, Nonlinear Optics, Optical and Magneto-optical Storage Devices, Photonic Devices,
and other relevant areas.

School of Artificial Intelligence [Code AIZ]

Artificial Intelligence and related applications include but not limited to Machine Learning
(deep learning, reinforcement learning, probabilistic modelling, generative models, neuro-
symbolic machine learning), Data Mining (graph mining, information retrieval, intelligent query
processing, knowledge graphs), Computer Vision and its applications (medical Imaging, perception
of mobility, etc), Natural Language Processing and related applications (machine translation,
dialog systems, summarization, etc.), AI & Robotics (planning, learning, human-interaction,
embodied systems, multi-agent systems), Mathematical foundations of AI, Ethics of AI, AI on the
edge, and Applications of AI to domain areas such as healthcare, agriculture, education, industry
4.0, material science, earth observation etc.

Amar Nath and Shashi Khosla School of Information Technology [Code ANZ]
Application areas: Computing for sustainability and social development (Climate action for rural
communities, Urban transportation and mobility, Community information services, Air
pollution, Sustainable Agriculture and nature-tech solutions); Sustainable and scalable
computing (Energy efficient computing, Thermal-aware systems, AI/ML Hardware, ML-based
technologies for industrial design, AR/VR for industry 4.0); Health and social care technologies
(Assistive technologies, Cancer detection, Analytics for public health, Community health
processes, Surgical devices and simulators for skill evaluation and enhancements, Indian
knowledge systems of health, Neuroimaging and neuroscience); Safe and responsible
computing (Quantum-Resistant Cryptography, Robust and Auditable Artificial Intelligence (AI)
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 55
Systems, Privacy-Enhancing Technologies, Cyber-physical Systems Security (IT / OT security),
Ethics of Computing, Cryptanalysis, Biometric Security).
Research areas: Data science / Machine learning / AI / Deep learning, Computer graphics /
Digital media processing / Computer vision, Natural language processing / Information retrieval,
Databases / Knowledge representation, Algorithms / Complexity theory, Human computer
interaction, Computer security / Network security / Cryptography / Data privacy, Computer
networks / Computer systems / Distributed systems / Concurrent systems, Programming
languages / Formal systems / Verification, Computer architecture / Embedded systems

Bharti School of Telecommunication Technology and Management [Code BSZ]

Telecom Networks, Telecom Software, Wireless Technologies, Optical Networks, Signal
Processing, Telecom Systems Design, Planning and Management, Regulatory and Policy Aspects
of Telecom Services and Systems, Embedded Telecom Systems, Telecom Network Management,
Performance Analysis of Communication System and Resource Management, Wireless Security,
Machine learning for wireless communication, Internet of Things, Wireless Sensor Networks,
Autonomous Driving Technology, Mobile Commerce, Mobile Applications, Mobile Services, Digital
Public Infrastructure & Development, Quantum Communications, Quantum Machine Learning,
Optical Wireless Communications.

School of Interdisciplinary Research [Code SRZ]

The prime focus of the School of Interdisciplinary Research (SIRe) is to nurture talents who are
interested in interdisciplinary/multidisciplinary/cross-disciplinary research problems. SIRe
provides an absolute interdisciplinary research environment to the students. To facilitate this, IITD
faculty from two or more different Departments/Centres/Schools define Interdisciplinary
Research problems as projects. The Scientist/Researchers/Professor from the National or
International Universities can also serve as one of the mentors, if required. The student selection
is done for specific research projects advertised periodically on the School website
(https://sire.iitd.ac.in/); the student is supervised by all the concerned faculty.

School of Public Policy [Code PPZ]

Agriculture, Food and Water; Energy and Environment; Internet, Digital Information and Society;
Innovation Systems and Processes; Industry and Economy; Technical Higher Education and
Sustainable Habitats. Candidates must refer to the School website
(https://spp.iitd.ac.in/academic) for details.

Kusuma School of Biological Sciences [Code BLZ]

Computational Biology, Systems Biology, Chemical Biology, Cellular Biophysics, protein folding &
misfolding with focus on infectious diseases and non-communicable disorders, Chaperone
assisted protein folding, Molecular biophysics of protein folding, unfolding and conformational
properties, Therapeutics against protein aggregation-associated diseases , Cognitive and
computational neuroscience, Molecular and cellular Neuroscience, Viral diseases, Nanoparticle-
based targeting, drug delivery, Structural Biology, Diagnostic Virology, Cancer Biology and
therapeutics, Tumour metabolism, Leukemia and myeloproliferation, Plant-based therapeutics,
Marine Bioprospecting, insulin signaling and insulin resistant diabetes, Leishmaniasis, ion channel
and receptor biology, Host pathogen interaction, single molecule biophysics, DNA-Protein
interactions, force spectroscopy, Vascular Biology, Aging biology, cytoskeletal dynamics,

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 56
Development, regeneration, photopharmacology, stem cell biology and organoids.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 57

ANNEXURE-II
M.TECH., M.S.(Research), M.DES., MPP, M.SC. AND M.A. PROGRAMMES
OFFERED
Department/Centre/School Programme Code
Programme

[A] M.Tech. Programmes of Deptts./Centre/School

Applied Mechanics Engineering Analysis and Design AMA
Applied Research in Electronics Radio Frequency Design and Technology CRF
Artificial Intelligence Machine Intelligence and Data Science AIB
Automotive Research & Tribology Electric Mobility CTE
Atmospheric Science Atmospheric-Oceanic Science & Technology AST
Biomedical Engineering Biomedical Engineering BMT*
Biochemical Engg. and Biomolecular and Bioprocess Engineering BEM
Biotechnology
Chemistry Molecular Engineering; Chemical Synthesis CYM
and Analysis#
Chemical Engineering Chemical Engineering CHE
Construction Engg. & Management CET
Environmental Engineering and CEV
Management
Geotechnical and Geoenvironmental CEG
Civil Engineering Engineering
Rock Engineering and Underground CEU
Structures
Structural Engineering CES
Transportation Engineering CEP
Water Resources Engineering CEW

*
For M. Tech. in Biomedical Engineering, the eligibility criteria for bachelors in medicine, dental sciences, veterinary sciences, and pharmacy
shall be either GATE (if available) or other GATE equivalent national examinations. In other disciplines (Engineering subjects), requirement
of a GATE score shall be as per institute norms.

# The Name of programme may change before the start of the Academic Session.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 58

Computer Science and Engineering Computer Science and Engineering MCS*

Electrical Engineering Communications Engineering# EEE
Computer Technology# EET
Control & Automation# EEA
Integrated Electronics & Circuits EEN
Power Electronics, Electrical Machines & EEP
Drives#
Power Systems# EES
Energy Science and Engineering Energy & Environment Technology and ESN
Management
Renewable Energy Technologies and ESR
Management
Materials Science and Engineering Materials Engineering MSM
Mechanical Engineering Mechanical Design MEM
Industrial Engineering# MEE
Production Engineering# MEP
Thermal Engineering MET
Physics Applied Optics# PHA
Solid State Materials PHM
Textile and Fibre Engineering Fibre Engg. and Textile Chemical Processing TTP
Textile Engineering TTE
[B] Interdisciplinary M. Tech. Programmes
M.Tech. Programmes Instrument Technology JID
Opto-Electronics & Optical Communication JOP
Telecom Technology & Management# JTM

*
Admission to M. Tech. and M.S. (Research) Programme in Computer Science and Engineering (MCS) is limited to candidates having a
Qualifying degree in Computer Science and Engineering, Electrical Engineering, Information Technology, M.Sc. Operations Research/Statics,
Electronic and Communication, M.Sc. M.A/M.Sc. Math, M.Sc. Math (with exposure to appropriate level course in Computer Science) and MCA
(with Math and Science at B.Sc. level).
In addition to the above, both the programmes (MCS and CSY) are limited to candidates who have appeared in GATE with Computer Science
and Engineering or Information Technology.

# The Name of programme may change before the start of the Academic Session.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 59
VLSI Design Tools & Technology JVL*
Cyber Security JCS
Robotics JRB
[C] M.S. (Research)
Applied Mechanics AMY
Biochemical Engg. & Biotechnology BEY
Civil Engineering CEY
Chemical Engineering CHY
Computer Science and Engineering CSY†
Electrical Engineering EEY‡
Energy Science and Engineering ESY
Materials Science and Engineering MSY
Mechanical Engineering MEY
Information Technology SIY
Telecommunication Technology and BSY
Management
Biological Sciences BLY
Healthcare Technology BMY
Automotive Research and Tribology CTY
Atmospheric and Oceanic Sciences ASY
Machine Intelligence & Data Science AIY
VLSI Design Tools & Technology JVY
Sensors, Instrumentation and Cyber-physical IDY
Systems Engineering
Transportation Safety and Injury Prevention TRY

*
M. Tech. programme in VLSI Design Tools and Technology is an interdisciplinary programme jointly offered by Electrical Engg. Deptt.,
Computer Science and Engineering Department & Centre for Applied Research in Electronics. The M. Tech. programme is wholly sponsored
by industries such as Texas Instruments, Cadence Design Systems, Cypress Semiconductors and Qualcomm. The Students will get a monthly
fellowship as per rules. Candidate applying for admission to this programme should have basic degree in Computer Science (B.Tech. or
equivalent) or Electrical Engineering (B.Tech. or equivalent) or Physics with electronics specialization (M.Sc. or equivalent) plus GATE.
†
Admission to M. Tech. and M.S. (Research) Programme in Computer Science and Engineering (MCS) is limited to candidates having a
Qualifying degree in Computer Science and Engineering, Electrical Engineering, Information Technology, M.Sc. Operations Research/Statics,
Electronic and Communication, M.Sc. M.A/M.Sc. Math, M.Sc. Math (with exposure to appropriate level course in Computer Science) and MCA
(with Math and Science at B.Sc. level).
In addition to the above, both the programmes (MCS and CSY) are limited to candidates who have appeared in GATE with Computer Science
and Engineering or Information Technology.
‡
Applicants to EEY (MS (Research)) program must have a minimum of four-year education after 12th standard with degree in science,
engineering, or medicine (B. Tech./M. Sc./BE/BS/MBBS) or equivalent.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 60

[D] M.Des. Programme

Design Industrial Design DDS
[E] M.Sc. Programme
Humanities & Social Sciences Cognitive Science HCS
Economics HES
[F] MPP Programme
Public Policy Master of Public Policy PPM
[G] M.A. Programme
Humanities & Social Sciences Culture, Society, Thought HST

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 61

ANNEXURE-III
OPTIONS FOR M.TECH., M.S.(RESEARCH) & M.DES. PROGRAMMES
ACCORDING TO THE DISCIPLINE IN WHICH THE CANDIDATE HOLDS THE
QUALIFYING DEGREE
Programme Disciplines of Qualifying Degree
Code
(As defined in
Annexure-II)

AIB Four Year B.Tech. / B.E. Degree (first class) or any equivalent degree (e.g.,
B.S. from a foreign university, and M.Sc., MCA, or other Master’s degrees
done as part of a 3+2 model) from any Engineering or Science discipline. A
valid GATE score would be needed where such a requirement is not waived,
such as students from an IIT with a CGPA exceeding a threshold. Strong
interest and background in computational mathematics and programming
are preferred.
AIY Four Year B.Tech. / B.E. Degree (first class) or any equivalent degree (e.g.,
B.S. from a foreign university, and M.Sc., MCA, or other Master’s degrees
done as part of a 3+2 model) from any Engineering or Science discipline. A
valid GATE score would be needed where such a requirement is not waived,
such as students from an IIT with a CGPA exceeding a threshold. Strong
interest and background in computational mathematics and programming
are preferred.
AMA Aerospace Engineering, Chemical Engineering, Civil Engineering,
Engineering and Computational Mechanics, Industrial Engineering,
Mechanical Engineering, Mining, Materials Science & Engineering, Marine
Engineering, Naval Architecture, Production Engineering
AMY Aerospace Engineering, Chemical Engineering, Civil Engineering,
Engineering and Computational Mechanics, Industrial Engineering,
Mechanical Engineering, Mining, Materials Science & Engineering, Marine
Engineering, Naval Architecture, Production Engineering
B.E./B.Tech. Agricultural Engineering, Chemical Engineering, Civil
Engineering, Environmental Engineering, Mechanical Engineering.
Candidates having B.Tech./B.E. in other branches of engineering will be
considered only if they have appropriate experience in related areas of
atmospheric and oceanic Sciences, meteorology, remote sensing, etc.
OR
AST M.Sc. Meteorology/Atmospheric Sciences/Oceanography, M.Sc. Physics/
Geo-Physics/Marine Engineering/Statistics/Chemistry; M.A./M.Sc. Maths,
MCA, M.Sc. Environmental/Agricultural Sciences, M.Sc. Geo-
Information/Remote sensing.
Candidates with MA/MSc/MCA qualifying degree
are required to have taken both maths and Physics at least at the
undergraduate level.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 62
B.E./B.Tech. Agricultural Engineering, Chemical Engineering, Civil
Engineering, Environmental Engineering, Mechanical Engineering.
Candidates having B.Tech./B.E. in other branches of engineering will be
considered only if they have appropriate experience in related areas of
ASY atmospheric and oceanic Sciences, meteorology, remote sensing, etc.
OR
M.Sc. Meteorology/Atmospheric Sciences/Oceanography, M.Sc. Physics/
Geo-Physics/Marine Engineering/Statistics/Chemistry; M.A./M.Sc. Maths,
MCA, M.Sc. Environmental/Agricultural Sciences, M.Sc. Geo-
Information/Remote sensing. Candidates with M.A./M.Sc./MCA qualifying
degree in subjects other than Meteorology/Atmospheric Sciences/
Oceanography are required to have taken both maths and physics at least
at the undergraduate level.
BEM Disciplines for BEM: B. Tech in Biotechnology/Biochemical Engineering
/Chemical Engineering OR M.Sc. in Life Sciences/ Biotechnology/
Biosciences/Biochemistry/Biophysics/Molecular biology/Microbiology
/Bioinformatics/Environmental Science/Chemistry.
BEY Biochemical Engineering, Biochemistry, Biotechnology, Bioinformatics,
Biophysics, Biosciences, Chemical Engineering, Chemistry, Environmental
Engineering, Environmental Science, Genetics, Industrial Biotechnology,
Life Sciences, Microbiology, Pharmaceutical Biotechnology
BMT B.Tech./B.E. in Biomedical, Chemical, Computer Science, Electrical,
Electronics and communications, Instrumentation and Mechanical
Engineering, Engineering Physics, Biochemical and Biotechnology
engineering, Materials Science.
OR
M.Sc. or equivalent in Biotechnology, Chemistry, Electronics, Materials
Science, Mathematics, Polymer science and technology, Physics OR
M.B.B.S/B.D.S./ Bachelor in Veterinary Sciences/B. Pharm. (duration 4 years
and more)
BMY BDS, BVSc, BAMS, BHMS, BPT, BPO, BPharm, MBBS, MD, MS, DM,
MCh, MDS, MPT, MPharm with Qualified NEET (PG), AIIMS(PG),
PGI(PG) or any other national level PG exam in respective specialt
BSY Computer Science/Computer Science & Engineering, Electronics &
Communication, Information Technology, Instrumentation Engineering,
M.Sc. Physics with specialization in Electronics, Electrical Engineering,
M.Sc. (Maths)/Applied Mathematics, MCA, Engineering Physics and
Mechanical Engineering.
BLY Bachelor's or Master's degree in any Engineering discipline. OR Bachelor's
(Four-year programme) or Master's degree in Chemistry, Physics,
Mathematics or Life Sciences
CEC Selection only jointly with L&T: Civil, Electrical, Mechanical,
CEG Civil Engineering,
CEP Architecture, Civil Engineering, Mechanical Engineering,
CES Civil Engineering,
CET Architecture, Civil Engineering,

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 63
CEU Civil Engineering, Mining Engineering,
CEV Biochemical Engineering/Biotechnology, Chemical Engineering, Civil
Engineering, Environmental Engineering,
CEW Agricultural Engineering, Civil Engineering,
CEY Civil Engineering,
CHE All areas of Chemical Engineering and allied disciplines
CHY All areas of Chemical Engineering and allied disciplines
CRF Electrical Engineering, Electronics & Communication, Engineering Physics.
CSY BTech/BE in any discipline OR BS (4yrs) in CS/Math from IISc/IISER OR
(Bachelor + Master) or Integrated masters (of total duration at least
5yrs)in Math/Statistics/Computer Science OR Master of Computer Ap
plications (3yrs).
Qualifying GATE Disciplines: CS, EC, EE, IN, MA, PH, ST, DA, XE
CTY Electrical Engineering, Electrical and Electronics Engineering, Mechanical
Engineering, Production Engineering, Production and Industrial
Engineering, Mechatronics, Automobile Engineering.
DDS B.Des./B.Arch./B.Plan./B.E./B. Tech./B.F.A. or B.V.A. of Four years duration
EEA Aeronautical Engineering, Biochemical Engineering, Biomedical
Engineering, Biotechnology, Chemical Engineering, Computer Science,
Computer Science & Engineering, Electrical Engineering, Energy
Engineering, Electronics & Communication, Instrumentation
Engineering, Mechanical Engineering
Qualifying GATE Disciplines:
AE (Aerospace Engineering), BM (Biomedical Engineering), BT
(Biotechnology), CH (Chemical Engineering), CS (Computer Science and
Information Technology) EC (Electronics and Communication
Engineering), EE (Electrical Engineering), IN (Instrumentation
Engineering), ME (Mechanical Engineering)
EEE Electronics & Communication, Electrical Engineering, Computer
Science/Computer Science & Engineering, Electronics and
Telecommunication, Instrumentation Engineering, Opto-electronics-
optical communication
Qualifying GATE Disciplines: EC (Electronics and Communication
Engineering)
EET Computer Science/Computer Science & Engineering, Electrical
Engineering, Electronics & Communication, Informational Technology,
Instrumentation Engineering, M.Sc. in Electronics.
Qualifying GATE Disciplines:
CS (Computer Science and Information Technology), DA (Data Science
and Artificial Intelligence), EC (Electronics and Communication
Engineering)

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 64
EEN Computer Science/Computer Science & Engineering, Electrical
Engineering, Energy Engineering, Electronics & Communication,
Instrumentation Engineering, Informational Technology, Engineering
Physics, M.Sc. Physics, M.Sc. Physics with specialization in Electronics.
Qualifying GATE Disciplines: EC, EE, IN, PH, CS, DA
EEP Computer Science/Computer Science & Engineering, Electrical Engineering,
Energy Engineering, Electronics & Communication, Instrumentation
Engineering.
Qualifying GATE Disciplines: EC (Electronics and Communication
Engineering), EE (Electrical Engineering), IN (Instrumentation Engineering)
EES Computer Science/Computer Science & Engineering, Electrical Engineering,
Energy Engineering.
Qualifying GATE Disciplines: EE (Electrical Engineering)
EEY Computer Science/Computer Science & Engineering, Electrical Engineering,
Engineering Physics, Information Technology, Instrumentation Engineering,
M.Sc. Physics with specialization in Electronics, Electronics &
Communication.
ESN B.Tech./B.Engg. in Chemical Engineering, Electrical Engineering, Electrical &
Electronics Engineering, Engineering Physics, Energy Engineering,
Mechanical Engineering, M.Sc. in Physics, Applied Physics, Electronics and
Instrumention, Material Science
4-year Bachelors Degree in Chemical Engineering, Civil Engineering,
ESR Electrical Engineering, Electrical & Electronics Engineering, Electronics and
Communication Engineering, Electronics Engineering, Electronics and
Instrumentation Engineering, Energy Engineering, Engineering Physics,
Industrial Engineering, Industrial Physics, Mechanical Engineering, Power
Engineering, Renewable Energy Engineering, Masters Degree in Physics,
Electronics and Applied Physics.
IDY Electrical Engineering, Engineering Physics, Instrumentation Engineering,
Mechanical Engineering, M.Sc. Physics
JES B.Tech./B.Engg. in Chemical Engineering, Electrical Engineering, Electrical&
Electronics Engineering, Engineering Physics, Energy Engineering,
Mechanical Engineering, M.Sc. in Physics, Applied Physics, Electronics.
JID Engineering Physics, Instrumentation Engineering, Mechanical Engineering,
M.Sc. Physics, Electronics and Communication/Telecom/Control
Engineering, Computer Science/Computer Engineering
JOP Computer Science/Computer Science & Engineering, Electrical Engineering,
Electronics & Communication, Engineering Physics, M.Sc. in Photonics,
M.Sc. in Physics/ Electronics/Electronic Sciences.
JTM Computer Science/Computer Science & Engineering, Electronics &
Communication, Instrumentation Engineering, M.Sc. Physics with
specialization in Electronics, Electrical Engineering
JVL Computer Science/Computer Science & Engineering, Electrical Engineering,
Engineering Physics, Informational Technology, Instrumentation
Engineering, M.Sc. Physics, M.Sc. Physics with specialization in Electronics
INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 65
JVY Computer Science/Computer Science & Engineering, Electronics &
Communication, Instrumentation Engineering, M.Sc. Physics with
specialization in Electronics, Electrical Engineering
JCS Computer Science/Computer Science & Engineering, Electrical Engineering,
Electronics & Communication Engineering, Informational Technology,
M.A./M.Sc. Math, M.Sc. Mathematics, M.Sc. in Computer Science or
equivalent
JRB Computer Science (CS), Mechanical Engineering (ME), Electrical Engineering (EE),
Electronics and Communication (EC), Aerospace (AE), Instrumentation
Engineering (IN), Data Science and Artificial Intelligence (DA)

MCS BTech/BE in any discipline OR BS (4yrs) in CS/Math from IISc/IISER OR

(Bachelor + Master) or Integrated masters (of total duration at least 5yrs)
in Math/Statistics/Computer Science OR Master of Computer Applications
(3yrs). Applicants must exhibit familiarity with Data Structures, Discrete
Mathematics and Digital Logic/Computer Organization via courses done during
their undergraduate/master's education.
Qualifying GATE Disciplines: CS
MEM Aeronautical Engineering, Agricultural Engineering, Automobile
Engineering, Instrumentation Engineering, Mechanical Engineering,
Metallurgy, Mining Engineering, Marine Engineering, Naval Architecture,
Production Engineering, Textile Engineering/Technology
MEE Aeronautical Engineering, Agricultural Engineering, Automobile
Engineering, Biochemical Engineering/Biotechnology, Chemical
Engineering, Civil Engineering, Computer Science/Computer Science &
Engineering, Electrical Engineering, Food Engineering Technology,
Industrial Engineering, Informational Technology, Instrumentation
Engineering, Mechanical Engineering, Metallurgy, Mining Engineering,
M.Sc. Operations Research, Manufacturing Science & Engineering, M.Sc.
Statistics, M.A./M.Sc. Maths, M.Sc. Mathematics/with an exposure to
appropriate level course-in Computer Technology, MCA (With Maths and
Science at B.Sc. level), Production Engineering, Textile Engineering
/Technology, Electronics & Communication
MET Aerospace Engineering, Automobile Engineering, Biomedical Engineering,
Computational Science & Engineering, Chemical Engineering, Civil &
Environmental Engineering, Cryogenics, Energy Engineering, Engineering
Physics, Environmental Engineering, Food Engineering Technology,
Instrumentation, Manufacturing & Automation, Mechanical Engineering,
Marine Engineering, Material Science
MEP Aeronautical Engineering, Agricultural Engineering, Automobile
Engineering, Industrial Engineering, Mechanical Engineering, Metallurgy,
Manufacturing Science & Engineering, Polymer and Rubber Technology,
Production Engineering, Textile Engineering/Technology, B.Tech. in Tool
Design
MEY All the qualifying disciplines eligible for MET, MEE, MEP and MEM
Programmes to be eligible to apply for MEY programme as well

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 66
MSM B.Tech. in Materials Engineering, Metallurgical Engineering, Ceramic
Engineering, Mechanical Engineering, B.Tech. in Engineering Physics, MSc
in Physics, B.Tech./MSc in Materials Science & Engineering
MSY B.Tech. in Materials Engineering, Metallurgical Engineering, Ceramic
Engineering, Mechanical Engineering, M.Sc. Physics, M.Sc. Materials
Science, B.Tech./M.Sc. in Polymers.
PHA M.Sc. Physics, Integrated M.Sc. Physics, M.Sc. Physics with specialization
in Electronics, B.Tech/BE Engineering Physics/Instrumentation
Engineering/Electrical Engineering, Electronics & Communication
Engineering
PHM Electrical Engineering, Electronics & Communication, Engineering
Physics, M.Sc. Physics, M.Sc. Physics with specialization in Electronics,
SIY Civil Engineering, Computer Science/Computer Science & Engineering,
Electrical Engineering, Electronics & Communication, Engineering Physics,
Energy Engineering/Energy System/Associated Disciplines, Industrial
Design, Industrial Engineering, Information Technology, Instrumentation
Engineering, Mechanical Engineering, M.Sc. Operations Research,
Manufacturing Science & Engineering, M. Sc. Statistics, M.A./M.Sc.
Maths, MCA (with Maths and Science at B.Sc. Level), M.Sc. Physics with
specialization in Electronics, Production Engineering, And other
engineering disciplines aligned with school activities
TTE Mechanical Engineering, Manufacturing Science & Engineering, Production
Engineering, Textile Engineering /Technology, Apparel Tech.
TTP Biochemical Engineering/Biotechnology, Chemical Engineering, Polymer
and Rubber Technology, Engineering Physics, Textile Chemistry, Textile
Engineering/ Technology, Material Science, M.Sc. Physics and M.Sc.
Chemistry
BE/B.Tech. in Civil/ Mechanical/Applied Mechanics/Automobile
Engineering/ Chemical Engineering/Computational
Mechanics/Electrical/Computer Science/Electronics and Communication
Or
TRY
B.Plan./B.Arch./B.Des./MBBS
Or
Mater in Anthropology, Business, Economic, Geography, Public Health,
Sociology, Maths or Statistics

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 67

ANNEXURE-IV

GATE SCORE CUT OFF* FOR ADMISSION TO NON-SPONSORED FULL-TIME

M.TECH. PROGRAMMES IN ACADEMIC YEAR 2024-2025
(This is only for reference as the cut off* this year may change substantially)

S.NO. M.Tech./ M.Des. Code GATE Paper/ B.Tech. GEN EWS OBC SC ST PH
Programme Discipline
1 Engineering Analysis AMA ALL 600 600 550 400 400 400
and Design
2 Machine Intelligence AIB ALL 720 686 641 472 303 202
and Data Science
3 Biomedical BMT Bio.Tech/ Life 450 450 427 405 405 405
Engineering Sc./EE/ME/EC/
BME/other
4 Radio Frequency CRF EE/EC/ Engg. Phy 618 567 489 411 350 350
Design &
Technology
AG,CE,CH,ME,AE,PI, 400 400 350 275 275 275
Atmospheric- MN,ES,GE,NM,XECY,
5 Oceanic Science AST PH,MA,ST,GG
Technology XE WITH OPTIONAL 350 350 325 275 275 275
PAPER H
6 Molecular Engg; CYM CY 420 420 399 378 378 378
Chemical Synthesis
and Analysis
7 Chemical CHE CH 550 550 500 450 350 350
Engineering
8 Construction Engg. CET CE 650 650 650 550 550 550
& Mgmt.
9 Environmental Engg. CEV CE 600 600 600 450 450 450
& Mgmt.
10 Rock Engg. & CEU CE 475 475 475 425 425 425
Underground
Structure
11 Geotechnical and CEG CE 550 550 550 500 500 500
Geoenvironmental
Engg.
12 Structural CES CE 650 650 650 550 550 550
Engineering
13 Water Resources CEW CE 550 550 550 300 300 300
Engg.
14 Transportation Engg. CEP CE 600 600 600 350 350 350

15 Computer Sc. & MCS CS/IT 800 800 720 550 550 550
Engg.
16 Communications EEE EC,EE 550 550 500 350 350 350
Engg. OTHERS
*
As per shortlisting criteria

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 68

17 Computer EET EC/CS 550 550 522 350 350 300

Technology
18 Control & EEA AE/BM/BT/CH/CS/EC/E 610 610 570 470 470 470
Automation E/IN/ME

19 Integrated EEN All 550 550 500 375 350 350

Electronics &
Circuits
20 Power Electronics, EEP EE 610 610 570 510 510 500
Electrical Machines OTHERS 700 700 650 600 600 500
& Drives
21 Power Systems EES EE 550 540 500 450 400 350
22 Mechanical Design MEM All 600 600 575 425 250 250

23 Industrial MEE All 600 600 575 425 250 250

Engineering
24 Production MEP All 600 600 575 425 250 250
Engineering
25 Thermal Engineering MET All 600 600 575 425 250 250

PHY, CHEM, PLASTIC 350 350 350 280 280 280

TECHNOLOGY
MATERIAL SCIENCE 300 300 300 240 240 240
Material Sci. & TEXTILE FIBRE 400 400 400 320 320 320
26 MSM
Engg.
MECHANICAL, 450 450 450 360 360 360
PRODUCTION
CHEMICAL 400 400 400 320 320 320
27 Applied Optics PHA PHA 400 400 360 267 267 267
EE /EC 700 700 630 455 455 455
28 Solid State Materials PHM PHM 400 400 360 267 267 267
EE /EC 700 700 630 455 455 455
29 Textile Engineering TTE, B.E./B.Tech (textile) 400 400 360 267 267 267
TTF
and
30 Fibre Science & B.E./B.Tech (non 600 600 540 400 400 400
TTC
Tech. textile)/M.sc
have
31 Textile Chemical same
Processing criter
ia for
Texti
le
and
Non
Texti
le
B.Tech in Chemical,
Energy &
Electrical, Electrical &
Environment
32 ESN Electonics Engg./ Engg. 550 550 550 300 300 300
Technologies and
Physics, Energy Engg.,
Management
Mechanicsl Engg.,

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 69
M.Sc. in Physics,
350 350 350 300 300 300
Applied Physics
Electrical, Electrical &
Comm../ Telecomm
Engg. /Instrumentation/ 575 575 525 400 400 400
Instrument Elect./Control computer
33 JID Science & Engg.
Technology
Mechanical 550 550 500 375 375 375
Physics/Applied 425 425 375 350 350 350
Physics/ Engg. Physics
Optoelectronics & EE/EC 590 590 580 400 340 340
34 Optical JOP PH/XE 400 400 360 267 267 267
Communication
PHY, CHEM, PLASTIC 350 350 350 280 280 280

CHEMICAL 450 450 450 380 380 380

Polymer Science & MECH. PRODUCTION 450 450 450 360 360 360
35 MSP
Tech.
TEXTILE FIBRE 400 400 400 320 320 320
MATERIAL SCI 300 300 300 240 240 240
36 Telecom. Tech & JTM CS, EC, EE, IN, DA 600 600 580 430 400 400
Mgmt.

37 Cyber Security JCS EE/EC/MA/CS 650 650 600 520 480 520
CS, ME, PI, EE, EC, 675 675 625 450 450 450
38 Robotics JRB AE, IN, XE
EC 720 720 720 670 670 670
EE 900 900 900 850 850 850
CS 580 580 580 530 530 530
VLSI Tool Design &
39 JVL IN 750 750 750 700 700 700
Technology
PHY 350 350 350 300 300 300
OTHERS 950 950 950 900 900 900
ME 500 500 500 400 400 400
40 Electric Mobility CTE EE 500 500 500 400 400 400

Biomolecular and B.TECH/BE valid gate score card in life scieence

41 Bioprocess Engg. BEM M.SC and biotechnology and chemical
engineering
M.Des.*
42 Industrial Design DDS 54 43 50 47 38 32
(M.Des.)

Note: PH and IN scores are also admissible w.e.f. 2020-21.

*
CEED Scores only

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 70

ANNEXURE-V

Syllabus for M.Sc. Economics Admission Test

(Conducted by IIT Delhi for the AY 2025-26)

Microeconomics
Consumer theory: Preference, utility and representation theorem, budget constraint, choice,
demand (ordinary and compensated), Slutsky equation, revealed preference axioms.
Theory of production and cost: Production technology, isoquants, production function with one
and more inputs, returns to scale, short run and long run costs, cost curves in the short run and
long run.
General equilibrium and welfare: Equilibrium and efficiency under pure exchange and production,
welfare economics, theorems of welfare economics.
Market structure: Perfect competition, monopoly, pricing with market power, price discrimination
(first, second and third), monopolistic competition and oligopoly.
Game theory: Strategic form games, iterated elimination of dominated strategies, Nash
equilibrium, mixed extension and mixed strategy Nash equilibrium, examples: Cournot, Bertrand
duopolies, Prisoner's dilemma.
Public goods and market failure: Externalities, public goods and markets with asymmetric
information (adverse selection and moral hazard).

Macroeconomics
Preference National income accounting: Structure, key concepts, measurements, and circular
flow of income- for closed and open economy, money, fiscal and foreign sector variables - concepts
and measurements.
Behavioural and technological functions: Consumption functions - absolute income hypothesis,
life-cycle and permanent income hypothesis, random walk model of consumption, investment
functions - Keynesian, money demand and supply functions, production function.
Business cycles and economic models (closed economy): Business cycles-facts and features, the
Classical model of the business cycle, the Keynesian model of the business cycle, simple Keynesian
cross model of income and employment determination and the multiplier (in a closed economy),
IS-LM Model, Hicks' IS-LM synthesis, role of monetary and fiscal policies.
Business cycles and economic models (open economy): Open economy, Mundell-Fleming model,
Keynesian flexible price (aggregate demand and aggregate supply) model, role of monetary and
fiscal policies.
Inflation and unemployment: Inflation - theories, measurement, causes, and effects,
unemployment - types, measurement, causes, and effects.

Growth models: Harrod-Domar, Solow and Neo-classical growth models (AK model, Romer model
and Schumpeterian growth model).

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 71
Statistics for Economics
Probability theory: Sample space and events, axioms of probability and their properties,
conditional probability and Bayes’ rule, independent events, random variables and probability
distributions, expectation, variance and higher order moments, functions of random variables,
properties of commonly used discrete and continuous distributions, density and distribution
functions for jointly distributed random variables, mean and variance of jointly distributed random
variables, covariance and correlation coefficients.
Mathematical statistics: Random sampling, types of sampling, point and interval estimation,
estimation of population parameters using methods of moments and maximum likelihood
procedures, properties of estimators, sampling distribution, confidence intervals, central limit
theorem, law of large number.
Hypothesis testing: Distributions of test statistics, testing hypotheses related to population
parameters, Type I and Type II errors, the power of a test, tests for comparing parameters from
two samples.
Correlation and regression: Correlation and types of correlation, the nature of regression analysis,
method of Ordinary Least Squares (OLS), CLRM assumptions, properties of OLS, goodness of fit,
variance and covariance of OLS estimator.

Mathematics for Economics

Preference Preliminaries and functions: Set theory and number theory, elementary functions:
quadratic, polynomial, power, exponential, logarithmic, functions of several variables, graphs and
level curves, convex set, concavity and quasiconcavity of function, convexity and quasi-convexity
of functions, sequences and series: convergence, algebraic properties and applications, complex
numbers and its geometrical representation, De Moivre’s theorem and its application.
Differential calculus: Limits, continuity and differentiability, mean value theorems, Taylor’s
theorem, partial differentiation, gradient, chain rule, second and higher order derivatives:
properties and applications, implicit function theorem, and application to comparative statics
problems, homogeneous and homothetic functions: characterisations and applications.
Integral calculus: Definite integrals, fundamental theorems, indefinite integrals and applications.
Differential equations, and difference equations: First order difference equations, first order
differential equations and applications.
Linear algebra: Matrix representations and elementary operations, systems of linear equations:
properties of their solution, linear independence and dependence, rank, determinants,
eigenvectors and eigenvalues of square matrices, symmetric matrices and quadratic forms,
definiteness and semidefiniteness of quadratic forms.

Optimization: Local and global optima: geometric and calculus-based characterisations, and
applications, multivariate optimization, constrained optimization and method of Lagrange
multiplier, second order condition of optima, definiteness and optimality, properties of value
function: envelope theorem and applications, linear programming: graphical solution, matrix
formulation, duality, economic interpretation.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 P a g e | 72

ADDITIONAL IMPORTANT INFORMATION FOR CANDIDATES

▪ Ragging in any form is banned in IIT Delhi.

▪ The Institute treats ragging as a cognizable offence and stern action will
be taken against the offenders.
▪ IIT Delhi will not be responsible for postal delays, if any.
▪ Communication mostly will be by electronic means
(emails/website/mobile). Candidates should check their emails, mobiles
and IITD website regularly.
▪ All matters of disputes will be subject to legal jurisdictions of the courts
in Delhi only.
▪ The Institute reserves the right to amend, without any notice, any
provisions stated in this brochure.

INFORMATION BROCHURE for Ph.D., M.Tech., M.S.(R), M.Des., MPP, M.A. and M.Sc. Admissions Sem I l IIT DELHI
 Information Brochure
(Semester I, 2025-2026)
for Admission to
Ph.D., M.Tech., M.S.(R), M.Des., M.P.P., M.A. and M.Sc.

Information Brochure 2025

INDIAN INSTITUTE OF TECHNOLOGY DELHI
HAUZ KHAS, NEW DELHI-110016, INDIA

IIT DELHI

INDIAN INSTITUTE OF TECHNOLOGY DELHI

www.iitd.ac.in

*For M.Sc. (Cognative Science) and some seats of M.Sc. (Economics) Admission to other M.Sc. Programme is on the basis of JAM