0% found this document useful (0 votes)
3 views10 pages

im310

The document is a user's guide for the Altec Lansing inMotion iM310 digital speaker system, detailing safety instructions, warranty information, and setup procedures. It includes guidelines for connecting various audio sources, powering the device, and troubleshooting common issues. The guide emphasizes the importance of following safety precautions to prevent electric shock and damage to the product.

Uploaded by

satyam71217
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
3 views10 pages

im310

The document is a user's guide for the Altec Lansing inMotion iM310 digital speaker system, detailing safety instructions, warranty information, and setup procedures. It includes guidelines for connecting various audio sources, powering the device, and troubleshooting common issues. The guide emphasizes the importance of following safety precautions to prevent electric shock and damage to the product.

Uploaded by

satyam71217
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

User’s guide

Downloaded from www.Manualslib.com manuals search engine


Downloaded from www.Manualslib.com manuals search engine
English
The lightning flash with arrowhead, within Caution: To prevent the risk of electric The exclamation point within an
an equilateral triangle, is intended to alert shock, do not remove cover (or back). equilateral triangle is intended to
the user to the presence of uninsulated No user-serviceable parts inside. Refer alert the user to the presence of
“dangerous voltage” within the product’s servicing to qualified service personnel. important operating and maintenance
enclosure that may be of sufficient (servicing) instructions in the literature
magnitude to constitute a risk accompanying the appliance.
of electric shock to persons.

CAUTION 14. Unplug this apparatus during lightning storms or when


unused for long periods of time.
To prevent electric shock do not use this (polarized) plug with
an extension cord, receptacle or other outlet unless the blades 15. Refer all servicing to qualified service personnel.
can be fully inserted to prevent blade exposure. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
WARNING
into the apparatus, the apparatus has been exposed to
To reduce the risk of fire or electric shock, do not expose this rain or moisture, does not operate normally, or has been
appliance to rain or moisture. dropped. For service, refer to qualified service personnel,
return to the dealer, or call the Altec Lansing service line
IMPORTANT SAFETY INSTRUCTIONS for assistance.
16. For products which incorporate batteries, please refer to
1. Read these instructions.
local regulations for proper battery disposal.
2. Keep these instructions.
17. Only use attachments/accessories specified by the
3. Heed all warnings. manufacturer.
4. Follow all instructions. 18. Use only with the cart, stand, tripod, bracket,
5. Do not use this apparatus near water – This apparatus or table specified by the manufacturer or
shall not be exposed to dripping or splashing, and no sold with the apparatus. When a cart is used,
objects filled with liquids, such as vases, shall be placed use caution when moving the cart/apparatus
on the apparatus. combination to avoid injury from tip-over.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
The apparatus should not be situated on a bed, sofa,
rug or similar surface that may block the ventilation
openings. The apparatus must not be placed in a built-in
installation, such as a closed bookcase or cabinet that
may impede the flow of air through the ventilation
openings. Ventilation should not be impeded by
covering the openings with items such as newspapers,
tablecloths, curtains, etc.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. No naked flame sources, such as lighted candles, should
be placed on the apparatus.
10. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for the replacement of the obsolete
outlet.
11. Protect the power cord from being walked on or
pinched – particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
12. Do not install in an area which impedes the access to
the power plug. Disconnecting the power plug is the
only way to completely remove power to the product
and must be readily accessible at all times.
13. Power source – Use only power supplies of the type
specified in the operating instructions or as marked on
the appliance. If a separate power supply is included
with this apparatus, do not substitute with any other
power supply – use only manufacturer-provided power
supplies.

Downloaded from www.Manualslib.com manuals search engine


Altec Lansing One Year Limited Warranty Customer Service
(Two-Year Limited Warranty In the European Union The answers to most setup and performance questions can be
and Asia) found in the Troubleshooting
What Does The Warranty Cover?: Altec Lansing warrants guide. You can also consult the FAQs in the customer support
that its products shall be free from defects in materials or section of our Web site at
workmanship, with the exceptions stated below. www.alteclansing.com. If you live in North America and still
What Is The Period Of Coverage?: For units purchased in can’t find the information you need, please call our customer
European Union or Asia, this warranty runs for two years service team for assistance before returning the speakers to
from the date of purchase. For units not purchased in Europe your retailer under their return policy.
or Asia, this warranty runs for one year from the date of Tel: 800-258-3288
purchase. The term of any warranties implied by law shall Email: [email protected]
expire when your limited warranty expires. Some states and/or
Member States in the European Union do not allow limitations If you live outside of North America, please visit our website
on how long an implied warranty lasts, so the above limitation at www.alteclansing.com and select your region to locate
may not apply to you. your country’s distributor.
What Does The Warranty Not Cover?: This warranty does For the most up-to-date information, be sure to check our
not cover any defect, malfunction or failure that occurs Web site at www.alteclansing.com.
as a result of: improper installation; misuse or failure to
follow the product directions; abuse; or use with improper, International Distribution
unintended or faulty equipment. (For information on proper International customers: For information regarding the
installation, operation and use consult the manual supplied distribution of Altec Lansing products in your country, please
with the product. If you require a replacement manual, you visit www.alteclansing.com and click on your region.
may download a manual from www.alteclansing.com.) Also,
consequential and incidental damages are not recoverable
under this warranty. Some states do not allow the exclusion Disposal of Old Electrical & Electronic Equipment
or limitation of incidental or consequential damages, so the This symbol on the product or on its packaging
above limitation or exclusion may not apply to you. indicates that this product shall not be treated as
What Will Altec Lansing Do To Correct The Problem?: Altec household waste. Instead it shall be handed over to
Lansing will, at its option, repair or replace any product that the applicable collection point for the recycling of
proves to be defective in material or workmanship. If your electrical and electronic equipment. By ensuring
product is no longer being manufactured, or is out of stock, this product is disposed of correctly, you will help prevent
at its option, Altec Lansing may replace your product with a potential negative consequences for the environment and
similar or better Altec Lansing product. human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling of
How To Get Warranty Service: To get a covered product materials will help to conserve natural resources. For more
repaired or replaced, you must contact Altec Lansing during detailed information about recycling of this product, please
the warranty period by email ([email protected]). contact your local city office or your household waste disposal
You must include in your email, your name, address, email service.
address, telephone number, date of purchase and a complete
description of the problem you are experiencing. In the
United States, you may alternatively contact Altec Lansing
by telephone at 1-800-ALTEC88 — please be prepared to
provide the same information. If the problem appears to be
related to a defect in material or workmanship, Altec Lansing
will provide you a return authorization and instructions for
return shipment. Return shipments shall be at the customer’s
expense, and the return must be accompanied by the
original proof of purchase. You should insure the shipment as
appropriate because you are responsible for the product until
it arrives at Altec Lansing.
How Will State Law Affect Your Rights?: This warranty
gives you specific legal rights, and you may also have other
rights which vary from state to state. Please note that in the
European Union, you as a consumer might have other legal
rights under national legislation of European Union Member
States governing the sale of Altec Lansing’s goods. Those rights
are not affected by this guarantee.
The above limited warranties and remedies are sole warranties
and remedies available to purchaser, if, and to the extent, valid
and enforceable under the applicable law.

Downloaded from www.Manualslib.com manuals search engine


inMotion iM310 Digital Speaker System
Portable Sound for a Compact Budget Assembling the inMotion iM310

English
Thank you for purchasing the Altec Lansing
iM310 digital speaker system for iPod® – Dock your iPod by sliding your iPod on top of
affordable, amazing sound for music lovers the iM310 docking station. If necessary, first
who listen with their eyes as well as their install the docking adapter that came with
ears! This new addition to the inMotion family your iPod or with this unit. While the docking
offers big sound with stylish portability. The adapter is not required for proper functioning of
iM310 provides outstanding acoustic volume your iPod and iM310, it will provide a better fit.
and audio performance for your iPod/MP3 Note: Alternate audio sources – such as non-
player previously unavailable at this size or dockable iPod models, CD players, MP3 players,
value. With powerful, crystal-clear sound and portable DVD players, and laptops – can also
surprisingly deep bass, the foldable design is be connected to the inMotion iM310. For more
ready to let you share your tunes anywhere information, see the “Connecting to alternate
you like! audio source” section.

Box Contents Power


• inMotion iM310 portable speaker system Use one of the following two options to power
• Docking adapters for iPod models your inMotion iM310:

• Power supply AC (Wall outlet) Power

• User’s guide and quick connect instructions Insert the barrel connector from the power
supply into the DC connector on the rear of the
inMotion iM310. After this connection is made,
Made for: insert the power supply into a wall outlet.
DC (Battery) Power
Install three AA batteries (not included) into
the battery compartment on the bottom of
the inMotion iM310. Make sure the batteries
• iPod touch
are installed as illustrated in the battery
• iPod nano (3rd generation) compartment.
• iPod classic
• iPod nano (2nd generation) Start Playing
• iPod with video
1. Turn on your iPod.
• iPod nano (1st generation)
2. Turn on the inMotion iM310 by pushing the
• iPod with color display power button located on the left side of the
top of the inMotion iM310. The indicator
• iPod with dock connector
light turns on.
• iPod mini
Note: To avoid hearing a popping sound when
you turn on your inMotion iM310, turn your
Placing the inMotion iM310 iPod on first.

Open the inMotion iM310 by pressing the


button on the front of the speaker system.
Position the inMotion iM310 on a level surface,
preferably close to you (within three feet).

Downloaded from www.Manualslib.com manuals search engine


Power Off

Turn off the inMotion iM310 by pushing the


power button located on the left side of the
top of the inMotion iM310. The indicator light
shuts off.

Auto Shut-down (Standby)

The inMotion iM310 automatically shuts down


if no audio is detected for three minutes.
NOTE: The Auto Shut-down (Standby) feature
is active during battery-only operation. If the
AC wall adapter is used, the inMotion iM310
will remain on as long as the power switch is
in the “On” position.

Connecting to alternate
audio source

The inMotion iM310 system includes an input


jack that allows you to connect to alternate
audio sources, such as non-dockable iPod
models, CD players, MP3 players, portable DVD
players, and laptops. To connect the iM310 to an
alternate audio source, follow the steps below.
1. Locate a 3.5 mm stereo cable (sold
separately).
2. Connect one end of the 3.5 mm stereo cable
into the auxiliary input jack (AUX) located
on the back of the inMotion iM310 system,
and the other end to the headphone or line
out jack on your alternate audio device.
3. Set the volume on the audio source at
mid‑level.
4. Set the volume on the inMotion iM310
at minimum level and adjust upward to a
comfortable listening level.

Volume

The slider on the top of the inMotion iM310


is the master volume control for the speaker
system. Move the slider to the right to
increase the volume or to the left to decrease
the volume.

Downloaded from www.Manualslib.com manuals search engine


Troubleshooting

Symptom Possible Problem Solution

English
No power The iM310 may not be properly See proper AC Power instructions in the
indicator light connected to a wall outlet. “Power” section of this manual.
is on (AC The surge protector (if used) may Make sure the surge protector is switched on.
Operation). not be powered on.
The wall outlet may not be Plug another device into the same wall
functioning. outlet to confirm the outlet is working.
The power may not be turned on. See instructions in the “Start Playing”
section of this manual.
No power The batteries may not be See proper DC Power instructions in the
indicator light installed properly. “Power” section of this manual.
is on (Battery The power may not be turned on. See instructions in the “Start Playing”
Operation). section of this manual.
There is no The volume may be set too low. To increase the volume, see instructions in
sound is coming the “Volume” section of this manual.
from speakers. If using an alternate audio source, see
instructions regarding volume level in the
“Connecting to alternate audio source”
section of this manual.
The iPod may not be correctly Turn off the iPod, remove it from the docking
seated into the docking station. station, reseat it, and turn it on again.
If using an alternate audio • See instructions in the “Connecting to
source, the audio source may alternate audio source” section of this
not be properly connected to the manual.
inMotion iM310 or there may • Trying using another audio source.
be a problem with the alternate
audio source.
There is a The iPod may not be correctly Turn off the iPod, remove it from the docking
crackling sound seated into the docking station. station, reseat it, and turn it on again.
coming from If using an alternate audio • See instructions in the “Connecting to
speakers. source, the audio source may alternate audio source” section of this
not be properly connected to the manual.
inMotion iM310 or there may • Trying using another audio source.
be a problem with the alternate
audio source.

Downloaded from www.Manualslib.com manuals search engine


Symptom Possible Problem Solution
There is a The operating system’s volume Check the operating system volume level
crackling sound level may be set too high. and decrease it if necessary.
coming from
speakers (when
connected to
PC or laptop).
The sound is The inMotion iM310’s volume To lower the volume, see instructions in the
distorted. level may be set too high. “Volume” section of this manual.
There is radio The unit may be too close to a Move the unit to see if the interference
interference. radio tower. goes away.
There is The unit may be located too close Move the GSM cell phone away from
intermittent to a GSM cell phone. the unit.
buzzing

Downloaded from www.Manualslib.com manuals search engine


Downloaded from www.Manualslib.com manuals search engine
“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod
and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Patents pending.
© 2008 Plantronics, Inc. All rights reserved.
Altec, Altec Lansing, inMotion, and the Altec Lansing inMotion logo
are registered trademarks or trademarks of Altec Lansing.
Plantronics, the logo design and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
All other trademarks appearing herein are the property of their respective owners.
Designed by Altec Lansing in the USA. Made in China.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareillage digital de Classe B est conforme au ICES-003 canadien.

HEADQUARTERS: 535 Rte. 6 & 209, Milford, PA 18337-0277 • 800-ALTEC-88 • 570-296-4434 • Fax 570-296-6887
EUROPE: 13 Rue Beaumont, L-1219 Luxembourg, Luxembourg
ASIA/PACIFIC: 25 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong
Engineered in USA. Made in China A12785 R01

Downloaded from www.Manualslib.com manuals search engine

You might also like