Champ Pro PFMA LED UL/cUL Listed

IEC/CE
5L
floodlights Type 4X; IP66
20,000 to 50,000 lumens

The Champ Pro PFMA LED family

39% lighter than the previous design with a small footprint
Champ® Pro PFMA high lumen LED floodlights are designed to
provide full-spectrum, crisp, white light. Four versions of the
PFMA are available, providing ideal solutions for a wide range of
applications.
Nominal Equivalent Typical energy
Model lumens WattsA MH luminaire savings / lifetime
PFMA20L 20,500 177 600W-750W Up to 78% reduction in
PFMA25L 25,500 217 750W-1000W energy costs and 120,000
PFMA40L 40,500 340 hours of continuous
1500W+
PFMA50L 50,500 400 operation PFMA20L/PFMA25L

Applications:
• Locations requiring continuous and
consistent light levels in extreme ambient
temperatures
• Areas requiring frequent on-and-off of
lights
• Where extremely corrosive, wet, dusty,
PFMA40L/PFMA50L
hot and/or cold conditions exist

5L
• Manufacturing plants, heavy industrial,
chemical, food and beverage facilities, Certifications and Standard materials:
mining, platforms, loading docks, tunnels,
outdoor wall and pole mounted areas compliances: •  Lamp housing and adapter – die cast
aluminum with Corro-free™ epoxy powder
NEC model: coat
Features: NEC/CEC: • Lens – heat- and impact-resistant glass
• Rugged design – engineered to perform in • Type 4X, IP66 (standard)
ambient temperatures from -40°C to 55°C • ABS • Gaskets – silicone and neoprene
• High efficiency – engineered to deliver UL standards: • External hardware – stainless steel
117 lumens per watt • UL1598; UL1598A; cUL
• Full frame yoke – designed to utilize the
IEC/CE model:
Fixture life:
SFA6 slipfitter and SWB6 wall mount
bracket, making it ideal for retrofit or new •  Rated life of 60,000 hours at 55°C
IEC:
installationsB operating ambient and 24/7 continuous
• IEC 60598-1 and IEC 60598-2-1 operation for 365 days
• Custom optics – standard 7x6 pattern
provides maximum light distribution • Wet locations
• 5 year fixture warranty • IP66 Photometrics:
• CE marked •  Refer to www.eaton.com (under the
Resources tab of each product family) for
specific photometric IES files

Electrical ratings – NEC model: Electrical ratings – IEC model:

120-277 VAC at 50/60 Hz 347-480 VAC at 50/60 Hz 120-277 VAC at 50/60 Hz 347-440 VAC at 50/60 Hz
Model Input power Input amps Input power Input amps Model Input power Input amps Input power Input amps
PFMA20L 177W 1.76A 177W 0.52A nPFMA20L 177W 1.76A 177W 0.52A
PFMA25L 217W 2.18A 216W 0.63A nPFMA25L 217W 2.18A 216W 0.63A
PFMA40L 340W 3.35A 338W 1.24A nPFMA40L 340W 3.35A 338W 1.24A
PFMA50L 400W 4.14A 400W 1.54A nPFMA50L 400W 4.14A 400W 1.54A

All models (UNV1 only) All models All models (UNV1 only) All models

Voltage range, Voltage range,

127-300V at 50/60 Hz Power factor >0.90 127-300V at 50/60 Hz Power factor >0.90
VDC VDC

AUNV1 at 120 VAC.

BSFA6 slipfitter and SWB6 wall mount bracket sold separately (20L/25L models only).

www.eaton.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2025 Eaton 325

 Champ Pro PFMA LED UL/cUL Listed
IEC/CE
5L
floodlights Type 4X; IP66
20,000 to 50,000 lumens

Versatile design
• Can be used for outdoor or
indoor applications, and for
a wide range of mounting
heights depending on model
and light level requirement

High lumen output

• Up to 120 lumens per watt
Smaller and lighter
• 25% smaller footprint than previous model • Up to 78% energy savings
over traditional HID fixtures
• 20 lbs. less weight than previous model (compared to 400W MH)
5L

Multiple lens options

• Tempered clear glass lens
Full frame yoke standard
• Designed to
utilize the SFA6
• Diffused glass lens optional
slipfitter and
SWB6 wall
mount bracket,
making it ideal
for retrofit or
new installation
(for 20L and
25L models)

Rugged heat sink

• Heat sink designed to perform and provide maximum light levels
in high ambient temperatures up to +55°C and as low as -40°C
• Thick walled castings make for a tough, rugged housing that keeps
the internal driver and LED temperature down

326 www.eaton.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2025 Eaton

Champ Pro PFMA LED UL/cUL Listed
IEC/CE
5L
floodlights Type 4X; IP66
20,000 to 50,000 lumens

Ordering information:

Part number example

PFMA20LCY/UNV34 76 M20 S891

PFMA 20L C Y /UNV34 76 M20 S891

Model Voltage Paint

PFMA NEC /UNV1

100-277 VAC, 50/60 Hz; BLANK Gray
127-300 VDC
nPFMA IEC/CE
/UNV34 347-480 VAC, 50/60 Hz
Lens material

Light source / intensity BLANK Clear glass lens

Optical distribution
20L 20,500 nominal lumens S891 Diffused glass lens
76
7x6 floodlight pattern
25L 25,500 nominal lumens optics

40,500 nominal lumens 3x3 floodlight pattern

5L
40L 33
optics
50L 50,500 nominal lumens

Entries
Color temperature
BLANK 3
/4” NPT
C 5000K, 70 CRI (cool white)
M20 20mm
W 3000K, 80 CRI (warm white)
M25 25mm

Mounting

Y Yoke

Accessories (ordered separately):

Description Cat. # Description Cat. #
• Bull horn, 2 tenon, gray..........................................................BLHN2 • Bolt-on visor.............................................................................. DSV2
• Bull horn, 3 tenon, gray..........................................................BLHN3 • Bolt-on wire guard....................................................................... P62
• Safety cable.............................................................................SC831
• Slipfitter................................................................................. SFA6C
• Slipfitter wall mount adapter................................................ SWB6C

Replacement driver kits (ordered separately)

PFMA 20L/25L UNV1 DRIVER KIT UNV1 replacement driver kit for PFMA20L & PFMA25L models
PFMA 20L/25L UNV34 DRIVER KIT UNV34 replacement driver kit for PFMA20L & PFMA25L models

C20L and 25L models only.

www.eaton.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2025 Eaton 327

 Champ Pro PFMA LED UL/cUL Listed
IEC/CE
5L
floodlights Type 4X; IP66
20,000 to 50,000 lumens

Dimensions and weights – PFMA20L/PFMA25L:

Width Height Depth Weight Effective projected area

Model in. mm. in. mm. in. mm. lb. kg. Position (tilt) ft.-sq.
PFMA20L & 25L 15.50 393.70 12.00 304.80 7.00 177.80 34.00 15.40 at 0° 1.50
at 45° backwards 1.10
at 60° forward 0.80
5L

Dimensions – PFMA40L/PFMA50L:

Width Height Depth Weight Effective projected area

Model in. mm. in. mm. in. mm. lb. kg. Position (tilt) ft.-sq.
PFMA40L & 50L 18.00 457.20 24.00 609.60 17.28 438.80 77.00 34.90 at 0° 3.20
at 45° backwards 3.25
at 60° forward 3.62

328 www.eaton.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2025 Eaton