0% found this document useful (0 votes)
67 views20 pages

GeM Bidding 7608419

The document outlines a bid for various electrical instruments and devices, with a bid end date of March 28, 2025, and an opening date of the same day. The total quantity required is 86 items, including rheostats, dimmerstats, and digital meters, under the Ministry of Education's Department of Higher Education. It specifies eligibility criteria for bidders, including a minimum average annual turnover and experience requirements, along with exemptions for MSEs and startups.

Uploaded by

niveditaranaiitr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
67 views20 pages

GeM Bidding 7608419

The document outlines a bid for various electrical instruments and devices, with a bid end date of March 28, 2025, and an opening date of the same day. The total quantity required is 86 items, including rheostats, dimmerstats, and digital meters, under the Ministry of Education's Department of Higher Education. It specifies eligibility criteria for bidders, including a minimum average annual turnover and experience requirements, along with exemptions for MSEs and startups.

Uploaded by

niveditaranaiitr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

Bid Number/बोली मांक ( बड सं या) :

GEM/2025/B/6025500
Dated/ दनांक : 07-03-2025

Bid Document/ बड द तावेज़

Bid Details/ बड ववरण

Bid End Date/Time/ बड बंद होने क तार ख/समय 28-03-2025 15:00:00

Bid Opening Date/Time/ बड खुलने क


28-03-2025 15:30:00
तार ख/समय

Bid Offer Validity (From End Date)/ बड पेशकश


180 (Days)
वैधता (बंद होने क तार ख से)

Ministry/State Name/मं ालय/रा य का नाम Ministry Of Education

Department Name/ वभाग का नाम Department Of Higher Education

Organisation Name/संगठन का नाम National Institute Of Technology (nit)

Office Name/कायालय का नाम Visvesvaraya National Institute Of Technology

े ता ईमेल/Buyer Email [email protected]

Total Quantity/कुल मा ा 86

Rheostat , DC Supply , Single Phase Dimmerstat , Three


phase Dimmerstat , Digital Wattmeter , Digital DC Ammeter
, Digital AC Ammeter , Digital AC Voltmeter , Digital DC
Item Category/मद केटे गर
Voltmeter , Regulated DC Supply or Rectifier , Contactless
Techometer , Basic Logic Gates , DC motor , Induction Motor
, Starter

Rheostat 0-10 ohm,0-2 Amp, Rheostat 0-110 ohm,0-2.8A


Double tube, Rheostat 0-1000 ohm,0-1.2 A , Rheostat -95
ohm,0-3.5 , DC Supply 0-30V),2 Amp with Digital Ammeter
And Voltmeter , Single Phase Dimmerstat 1-Phase,8Amp
With Input=240V & Output=0-270 Volts, Three phase
Dimmerstat 3-Phase,10Amp,Input voltage 415v AC,Output
470V AC, Digital Wattmeter Voltage-600V, Amp-5A,Range-
GeMARPTS म खोजी गई ं ग / Searched 3000W,230V,1Phase, Digital DC Ammeter 0-1 A,0-96mm,
Strings used in GeMARPTS Digital AC Ammeter 0-2.5/5Amp, (0-96mm), Digital AC
Voltmeter 0-75/150/300V (0-96mm), Digital DC Voltmeter 0-
150/300V (0-96mm), Digital DC Ammeter 0-2.5/5A (0-
96mm), Regulated DC Supply/Rectifier, Contactless
Techometer Digital 2.5 to 9999 RPM,Non Contact type Real
Instruments, Basic Logic Gates Size 28x28 cm , DC motor
3kw,3hp,1500 rpm, Induction Motor Single phase,1/2 HP
Capacitor type, Starter 3 Points

Searched String: Rheostat 0-10 ohm,0-2 Amp

Isopropyl Alcohol (2 - Propanol), Online UPS (V2), Tri Sodium


Phosphate Dodecahydrate, Toluidine, Desktop Computers,
Foreign body (metal) detector for veterinary use, Line
Interactive UPS with AVR (V2), modular electrical switches
and accessories, Disposable Surgical Rubber Gloves -

1 / 20
Prepowdered as per IS 13422, Cat 6 Patch cord
Bid Details/ बड ववरण
Searched String: Rheostat 0-110 ohm,0-2.8A Double tube

Disposable Surgical Rubber Gloves - Prepowdered as per IS


13422, Battery Charger, Heavy Duty, PCR Tubes, Switch
Mode Power Supply (SMPS) as per IS 14886:, bi distillation
units double distillation water unit, Minifuge, Syringe Filter,
SEWAGE TREATMENT PLANT, Line Interactive UPS with AVR
(V2), Online UPS (V2)

Searched String: Rheostat 0-1000 ohm,0-1.2 A

Disposable Surgical Rubber Gloves - Prepowdered as per IS


13422, Line Interactive UPS with AVR (V2), Battery Charger,
Heavy Duty, Switch Mode Power Supply (SMPS) as per IS
14886:, Minifuge, Electric Kettles and Jugs for Household as
per IS 367, Online UPS (V2), Small Sized Valve Regulated
Lead Acid Batteries as per IS Jisc 8702 - 1, Digital Light
Meter, Database Management System Software (V2)

Searched String: Rheostat -95 ohm,0-3.5

Cat 6 Patch cord, XLPE Cable for Working Voltages up to and


Including 1.1 KV as per IS 7098 (Part 1), Examination Cum
Dressing Table with Drainage 0, PP Plastic Woven Non -
Laminated Bags (for Seed Packaging) (V2), Resistors (V2),
Water tender Type B or Fire or Rescue trucks as per IS 950,
Air Quality Monitor (Indoor), Switch Mode Power Supply
(SMPS) as per IS 14886:, Tissue Homogenizer, Galvanized
Steel Chain Link Fence Fabric (V2) conforming to IS 2721

Searched String: DC Supply 0-30V),2 Amp with Digital


Ammeter And Voltmeter

Switch Mode Power Supply (SMPS) as per IS 14886:,


Combination therapy with 2 channel electrotherapy, vaccum
and dual frequency ultrasound

Searched String: Single Phase Dimmerstat 1-Phase,8Amp


With Input=240V & Output=0-270 Volts

Portable Single Operated Rectifier Type DC Arc Welding Set


Suitable for Manual Arc Welding Process as per IS 4559,
Servo Control Drive - Servo Motor Operated LVC as per IS
9815 (Part 1)

Searched String: Three phase Dimmerstat 3-


Phase,10Amp,Input voltage 415v AC,Output 470V AC

Solar Power Plant (Roof Top) for ONGRID System, Three


Phase, Line Operated Three Phase AC Motors ISI Marked to
IS 12615, Portable Single Operated Rectifier Type DC Arc
Welding Set Suitable for Manual Arc Welding Process as per
IS 4559, Multi-Pin electrical top for industrial appliacation,
Fixed Capacitors (Fixed Capacitor for Single Phase AC
Electric Fan) as per IS 1709:1984, AC Static Watthour
Meters - Energy Meter (V2) as per IS 13779, Shaping
Machine as per IS 10949, AC Voltage Transducer (V2), Servo
Control Drive - Servo Motor Operated LVC as per IS 9815
(Part 1), Solar Power Plant (Roof Top) for ONGRID System,
Single Phase

Searched String: Digital Wattmeter Voltage-600V, Amp-


5A,Range-3000W,230V,1Phase

Solar Power Plant (Roof Top) for ONGRID System, Single

2 / 20
Phase, Porcelain Insulators for Overhead Power Lines with a
Bid Details/ बड ववरण
Nominal Voltage up to and Including 1000 V as per IS 1445,
Solar Power Plant (Roof Top) for ONGRID System, Three
Phase

Searched String: Digital DC Ammeter 0-1 A,0-96mm

PVC Copper Cable Single Core and Multi Core Circular


Sheathed Cable with Rigid Conductor (V2) as per IS 694,
digital conductivity meter, Milliammeter-IS:1248, Ring
Binder - File Folder, PVC Copper Cable Single Core and Multi
Core Circular Sheathed Cord with Flexible Conductor (V2) as
per IS 694, Saw Blades or Hacksaw Blades as per IS 2594,
Stereo Microscope (V1), Digital Light Meter, Swing Check
Type Reflux Valves for Water Works Purposes (Single Door
Pattern) (V2) as per IS 5312 (Part1), Online UPS (V2)

Searched String: Digital AC Ammeter 0-2.5/5Amp, (0-


96mm)

Desktop Computers, Temperature Indicator for Transformers


- Analog type, Online UPS (V2), Surgical Gloves as per IS
4148, PVC Copper Cable Single Core and Multi Core Circular
Sheathed Cable with Rigid Conductor (V2) as per IS 694,
GeMARPTS म खोजा गया प रणाम / Searched
PVC Copper Cable Single Core and Multi Core Circular
Result generated in GeMARPTS Sheathed Cord with Flexible Conductor (V2) as per IS 694,
Cat 6 Patch cord, XLPE Cable for Working Voltages up to and
Including 1.1 KV as per IS 7098 (Part 1), Disposable Surgical
Rubber Gloves - Prepowdered as per IS 13422, Electric
Kettles and Jugs for Household as per IS 367

Searched String: Digital AC Voltmeter 0-75/150/300V (0-


96mm)

Acetaldehyde solution, Galvanized Steel Chain Link Fence


Fabric (V2) conforming to IS 2721, Temperature Indicator
for Transformers - Analog type, PVC Copper Cable Single
Core and Multi Core Circular Sheathed Cord with Flexible
Conductor (V2) as per IS 694, Ultrasonic Thickness Gauge,
Analog-Digital Circuits Development Platform, Equipment
Camouflage Nets (Jute), Measuring (Travelling) Microscope
as per IS 4329, Solar Powered Drinking Water Cooler,
Irrigation Equipment Sprinkler Pipes (V2) as per IS 14151
(Latest)

Searched String: Digital DC Voltmeter 0-150/300V (0-


96mm)

Galvanized Steel Chain Link Fence Fabric (V2) conforming to


IS 2721, DC Electronic Load, Ultrasonic Thickness Gauge,
Analog-Digital Circuits Development Platform, Measuring
(Travelling) Microscope as per IS 4329, Solar Powered
Drinking Water Cooler, PVC Copper Cable Single Core and
Multi Core Circular Sheathed Cable with Rigid Conductor
(V2) as per IS 694, Swing Check Type Reflux Valves for
Water Works Purposes (Single Door Pattern) (V2) as per IS
5312 (Part1)

Searched String: Digital DC Ammeter 0-2.5/5A (0-96mm)

Desktop Computers, Online UPS (V2), Foreign body (metal)


detector for veterinary use, Surgical Gloves as per IS 4148,
PVC Copper Cable Single Core and Multi Core Circular
Sheathed Cable with Rigid Conductor (V2) as per IS 694,
PVC Copper Cable Single Core and Multi Core Circular
Sheathed Cord with Flexible Conductor (V2) as per IS 694,

3 / 20
Cat 6 Patch cord, XLPE Cable for Working Voltages up to and
Bid Details/ बड ववरण
Including 1.1 KV as per IS 7098 (Part 1), Disposable Surgical
Rubber Gloves - Prepowdered as per IS 13422, Electric
Kettles and Jugs for Household as per IS 367

Searched String: Regulated DC Supply/Rectifier

DC Regulated Power Supply, Portable Single Operated


Rectifier Type DC Arc Welding Set Suitable for Manual Arc
Welding Process as per IS 4559, Regulators for Breathing
Apparatus ( Diving Instruments or Accessories), Switching
Power Supply for Wireless Application

Searched String: Contactless Techometer Digital 2.5 to


9999 RPM,Non Contact type Real Instruments

Category not available on GeM for the text string uploaded


by the buyer

Searched String: Basic Logic Gates Size 28x28 cm

File/Folder (V3), Handloom Cotton Bed Sheets (V2) as per IS


745, Wool / Polypropylene Blended Blankets as per IS
12848, Handloom Cotton Pillow Covers (V2), Handloom
Wool Blankets as per IS 894, Polyester Blanket (V2), Towel
Hand (IAF), Cotton Towelling and Towels (V2) as per IS
7056, Towels - Hotel Linen, Handloom Cotton Sponge Cloth
as per IS 860

Searched String: DC motor 3kw,3hp,1500 rpm

Servo Control Drive - Servo Motor Operated LVC as per IS


9815 (Part 1), Motorized core cutting machine, Induction
Motor as per IS 12615, IS 325, Starter Motor Assembly,
Hopper Tipper Dumper (Version 2), Resistance Welding
Equipment / Rocker Arm Spot Welding Machine as per IS
4804, Automotive Vehicles - Pneumatic Tyres for 2 and 3
Wheeled Motor Vehicles, Quadricycles and E-Rickshaw / E-
Carts as per IS 15627, Circuit Breakers for DC Operation

Searched String: Induction Motor Single phase,1/2 HP


Capacitor type

Industrial Siren / Electrical Siren, Submersible Pump Set


Single Phase as per IS 8034, AC Static Watthour Meters -
Energy Meter (V2) as per IS 13779, Servo Control Drive -
Servo Motor Operated LVC as per IS 9815 (Part 1), Swing
Check Type Reflux (Non - Return) Valves for Water Works
Purposes (Single Door Pattern) as per IS 5312

Searched String: Starter 3 Points

Tactical 3 Points Sling Universal (V2) as per IS 16725, Public


Place Seating Chair, DOL starter, Starter Motor Assembly,
Entry and Mid Level Desktop Computer, Star Delta Starter
(V2), Lead Acid starter Batteries, Desktop Computers,
Starters For Fluorescent Lamps - IS 2215, Submersible
Pump Starters (Motor starter controls)
Submersible Pump Starters (Motor starter controls)
अिधसूचना के िलए चयिनत ासंिगक े णयाँ / Relevant
Rheostat Kit For Educational Purpose
Categories selected for notification Ammeter - Analog (Panel Meter) as per IS 1248

BOQ Title/बीओ यू शीषक Instrument Meters Devices for basic electric lab

4 / 20
Bid Details/ बड ववरण

Minimum Average Annual Turnover of the


bidder (For 3 Years)/ बडर का यूनतम औसत 3 Lakh (s)
वा षक टनओवर (3 वष का)

Years of Past Experience Required for


same/similar service/उ ह ं/समान सेवाओं के िलए 1 Year (s)
अपे त वगत अनुभव के वष

MSE Exemption for Years Of


Experience/अनुभव के वष से एमएसई छूट/ and Yes
Turnover/टनओवर के िलए एमएसई को छूट ा है

Startup Exemption for Years Of


Experience/अनुभव के वष से टाटअप छूट/ and Yes
Turnover/ टनओवर के िलए टाटअप को छूट ा है

Experience Criteria,Past Performance,Bidder


Turnover,Certificate (Requested in ATC),Compliance of BoQ
Document required from seller/ व े ता से मांगे specification and supporting document
*In case any bidder is seeking exemption from Experience /
गए द तावेज़ Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer

Do you want to show documents uploaded


by bidders to all bidders participated in No
bid?/

Past Performance/ वगत दशन 50 %

Bid to RA enabled/ बड से रवस नीलामी स य कया No

Type of Bid/ बड का कार Single Packet Bid

Primary product category Regulated DC Supply or Rectifier

Time allowed for Technical Clarifications


during technical evaluation/तकनीक मू यांकन के 2 Days
दौरान तकनीक प ीकरण हे तु अनुमत समय

Inspection Required (By Empanelled


Inspection Authority / Agencies pre- No
registered with GeM)

Evaluation Method/मू यांकन प ित Total value wise evaluation

Arbitration Clause No

Mediation Clause No

EMD Detail/ईएमड ववरण

Required/आव यकता No

ePBG Detail/ईपीबीजी ववरण

5 / 20
Required/आव यकता No

MII Purchase Preference/एमआईआई खर द वर यता

MII Purchase Preference/एमआईआई खर द वर यता Yes

MSE Purchase Preference/एमएसई खर द वर यता

MSE Purchase Preference/एमएसई खर द वर यता Yes

1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be
exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of
quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the
"OEM Average Turnover" criteria also subject to meeting of quality and technical specifications. In case any
bidder is seeking exemption from Turnover / Experience Criteria, the supporting documents to prove his eligibility
for exemption must be uploaded for evaluation by the buyer.
2. If the bidder is a Startup, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and
"Experience Criteria" subject to their meeting of quality and technical specifications. If the bidder is OEM of the
offered products, it would be exempted from the "OEM Average Turnover" criteria also subject to meeting of
quality and technical specifications. In case any bidder is seeking exemption from Turnover / Experience Criteria,
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer.
3. The minimum average annual financial turnover of the bidder during the last three years, ending on 31st
March of the previous financial year, should be as indicated above in the bid document. Documentary evidence in
the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant /
Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the
date of constitution / incorporation of the bidder is less than 3-year-old, the average turnover in respect of the
completed financial years after the date of constitution shall be taken into account for this criteria.
4. Experience Criteria: In respect of the filter applied for experience criteria, the Bidder or its OEM {themselves or
through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any
Central / State Govt Organization / PSU for number of Financial years as indicated above in the bid document
before the bid opening date. Copies of relevant contracts to be submitted along with bid in support of having
supplied some quantity during each of the Financial year. In case of bunch bids, the category of primary product
having highest value should meet this criterion.
5. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier
as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its
subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum
local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the
Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local
content and the details of locations at which the local value addition is made along with their bid, failing which
no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating
to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company
and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public
Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers
as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are
not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .The
buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023.
OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy
for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017.

6. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are
validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small
Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and
its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the
Purchase preference, the bidder must be the manufacturer / OEM of the offered product on GeM. Traders are

6 / 20
excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers
offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid
for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in
this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide
eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is
not an MSE and MSE Seller (s) has / have quoted price within L-1+ 15% (Selected by Buyer) of margin of
purchase preference /price band defined in relevant policy, such MSE Seller shall be given opportunity to match
L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are
advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for
compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012
and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is
validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents
submitted.
7. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and
for determining the Eligibility Criteria related to Turn Over, Past Performance and Project / Past Experience etc.
This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any
impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of
quoted prices which would be determined by the buyer based on its own assessment of reasonableness and
based on competitive prices received in Bid / RA process.
8. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 50% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU. Copies of relevant contracts (proving supply of
cumulative order quantity in any one financial year) to be submitted along with bid in support of quantity
supplied in the relevant Financial year. In case of bunch bids, the category related to primary product having
highest bid value should meet this criterion.

Rheostat
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 5 45
Bharwani

Rheostat
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

7 / 20
Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 8 45
Bharwani

Rheostat
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 2 45
Bharwani

8 / 20
Rheostat
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 2 45
Bharwani

DC Supply
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

9 / 20
Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 6 45
Bharwani

Single Phase Dimmerstat


(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 6 45
Bharwani

Three Phase Dimmerstat


(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

10 / 20
Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 3 45
Bharwani

Digital Wattmeter
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 13 45
Bharwani

Digital DC Ammeter
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

11 / 20
Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 5 45
Bharwani

Digital AC Ammeter
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 12 45
Bharwani

Digital AC Voltmeter
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

12 / 20
Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 4 45
Bharwani

Digital DC Voltmeter
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 3 45
Bharwani

Digital DC Ammeter
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier

13 / 20
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 3 45
Bharwani

Regulated DC Supply Or Rectifier


(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

14 / 20
Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 1 45
Bharwani

Contactless Techometer
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 4 45
Bharwani

Basic Logic Gates


(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

15 / 20
Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 6 45
Bharwani

DC Motor
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 1 45
Bharwani

Induction Motor
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

16 / 20
Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 1 45
Bharwani

Starter
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Deepak Rupchand
1 440010,S A ROAD NAGPUR 1 45
Bharwani

Buyer Added Bid Specific Terms and Conditions/ े ता ारा जोड़ गई बड क वशेष शत

1. Generic

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up
to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to
increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at
the contracted rates. The delivery period of quantity shall commence from the last date of original

17 / 20
delivery order and in cases where option clause is exercised during the extended delivery period the
additional time shall commence from the last date of extended delivery period. The additional delivery
time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to
minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the
original delivery period. The Purchaser may extend this calculated delivery duration up to the original
delivery period while exercising the option clause. Bidders must comply with these terms.

2. Turnover

Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last
three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the
relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
bidder is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria.

3. Certificates

Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the
Bid document, ATC and Corrigendum if any.

4. Generic

Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any
responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates
(whichever is lower), subject to the maximum of quoted GST %.

5. Warranty

Warranty period of the supplied products shall be 1 years from the date of final acceptance of goods or
after completion of installation, commissioning & testing of goods (if included in the scope of supply), at
consignee location. OEM Warranty certificates must be submitted by Successful Bidder at the time of
delivery of Goods. The seller should guarantee the rectification of goods in case of any break down during
the guarantee period. Seller should have well established Installation, Commissioning, Training,
Troubleshooting and Maintenance Service group in INDIA for attending the after sales service. Details of
Service Centres near consignee destinations are to be uploaded along with the bid.

6. Generic

Experience Criteria: The Bidder or its OEM {themselves or through reseller(s)} should have regularly,
manufactured and supplied same or similar Category Products to any Central / State Govt Organization /
PSU for 1 year before the bid opening date. Copies of relevant contracts to be submitted along with bid in
support of having supplied some quantity during each of the year. In case of bunch bids, the primary
product having highest value should meet this criterion.

7. Generic

Installation, Commissioning, Testing, Configuration, Training (if any - which ever is applicable as per scope
of supply) is to be carried out by OEM / OEM Certified resource or OEM authorised Reseller.

8. Past Project Experience

Proof for Past Experience and Project Experience clause: For fulfilling the experience criteria any
one of the following documents may be considered as valid proof for meeting the experience criteria:a.
Contract copy along with Invoice(s) with self-certification by the bidder that service/supplies against the
invoices have been executed.b. Execution certificate by client with contract value.c. Any other document
in support of contract execution like Third Party Inspection release note, etc.Proof for Past Experience and
Project Experience clause: For fulfilling the experience criteria any one of the following documents may be
considered as valid proof for meeting the experience criteria:a. Contract copy along with Invoice(s) with
self-certification by the bidder that service/supplies against the invoices have been executed.b. Execution
certificate by client with contract value.c. Any other document in support of contract execution like Third
Party Inspection release note, etc.

18 / 20
9. Buyer Added Bid Specific ATC

Buyer Added text based ATC clauses

Specification:

For Sr. No. 14 (of specification sheet): Regulated DC Supply/Rectifier :- Input Voltage- 3 Phase, 440V AC, 50
hz, Output Voltage: 220V DC, 30A, Variable DC rectifier.

Disclaimer/अ वीकरण

The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization, whereby Buyer organization is solely responsible for the impact of these clauses
on the bidding process, its outcome, and consequences thereof including any eccentricity / restriction arising in
the bidding process due to these ATCs and due to modification of technical specifications and / or terms and
conditions governing the bid. If any clause(s) is / are incorporated by the Buyer regarding following, the bid and
resultant contracts shall be treated as null and void and such bids may be cancelled by GeM at any stage of
bidding process without any notice:-

1. Definition of Class I and Class II suppliers in the bid not in line with the extant Order / Office Memorandum
issued by DPIIT in this regard.
2. Seeking EMD submission from bidder(s), including via Additional Terms & Conditions, in contravention to
exemption provided to such sellers under GeM GTC.
3. Publishing Custom / BOQ bids for items for which regular GeM categories are available without any
Category item bunched with it.
4. Creating BoQ bid for single item.
5. Mentioning specific Brand or Make or Model or Manufacturer or Dealer name.
6. Mandating submission of documents in physical form as a pre-requisite to qualify bidders.
7. Floating / creation of work contracts as Custom Bids in Services.
8. Seeking sample with bid or approval of samples during bid evaluation process. (However, in bids for
attached categories, trials are allowed as per approved procurement policy of the buyer nodal Ministries)
9. Mandating foreign / international certifications even in case of existence of Indian Standards without
specifying equivalent Indian Certification / standards.
10. Seeking experience from specific organization / department / institute only or from foreign / export
experience.
11. Creating bid for items from irrelevant categories.
12. Incorporating any clause against the MSME policy and Preference to Make in India Policy.
13. Reference of conditions published on any external site or reference to external documents/clauses.
14. Asking for any Tender fee / Bid Participation fee / Auction fee in case of Bids / Forward Auction, as the
case may be.

Further, if any seller has any objection/grievance against these additional clauses or otherwise on any aspect of
this bid, they can raise their representation against the same by using the Representation window provided in
the bid details field in Seller dashboard after logging in as a seller within 4 days of bid publication on GeM. Buyer
is duty bound to reply to all such representations and would not be allowed to open bids if he fails to reply to
such representations.

All GeM Sellers / Service Providers are mandated to ensure compliance with all the applicable laws /
acts / rules including but not limited to all Labour Laws such as The Minimum Wages Act, 1948, The
Payment of Wages Act, 1936, The Payment of Bonus Act, 1965, The Equal Remuneration Act, 1976,
The Payment of Gratuity Act, 1972 etc. Any non-compliance will be treated as breach of contract
and Buyer may take suitable actions as per GeM Contract.

This Bid is also governed by the General Terms and Conditions/ यह बड सामा य शत के अंतगत भी शािसत है

19 / 20
In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action

in accordance with the laws./ जेम क सामा य शत के खंड 26 के संदभ म भारत के साथ भूिम सीमा साझा करने वाले दे श के बडर से खर द
पर ितबंध के संबंध म भारत के साथ भूिम सीमा साझा करने वाले दे श का कोई भी बडर इस िन वदा म बड दे ने के िलए तभी पा होगा
जब वह बड दे ने वाला स म ािधकार के पास पंजीकृ त हो। बड म भाग लेते समय बडर को इसका अनुपालन करना होगा और कोई भी
गलत घोषणा कए जाने व इसका अनुपालन न करने पर अनुबंध को त काल समा करने और कानून के अनुसार आगे क कानूनी कारवाई
का आधार होगा।

---Thank You/ ध यवाद---

20 / 20

You might also like