“CERTIFICATE AND RESUME BUILDER’’

A THESIS

SUBMITTED FOR THE AWARD OF THE DIPLOMA IN

COMPUTER TECHNOLOGY

Submitted By

AROTE DIKSHA APPASAHEB (2100340140)

CHAVAN SHREYA VILAS (2100340157)
DANGE RUCHA SACHIN (2100340160)
DHANWATE RUSHA DNYANESHWAR (2100340168)

UNDER THE GUIDANCE OF

PROF .V. S. DHANDE

SANJIVANI K.B.P. POLYTECHNIC, KOPARGAON,

423063 DEPARTMENT OF COMPUTER TECHNOLOGY
March 2023-24
 Department of Computer Technology
SANJIVANI K.B.P. POLYTECHNIC, KOPARGAON

Department of Computer Technology

SANJIVANI K.B.P. POLYTECHNIC, KOPARGAON

CERTIFICATE

“Certificate and Resume Builder”

SUBMITTED BY
Miss. Arote Diksha
Appasaheb Miss. Chavan
Shreya Vilas Miss. Dange
Rucha Sachin
Miss. Dhanwate Rusha Dnyaneshwer

Is a bonafid work carried out by above students under the supervision of Prof. V. S. Dhande and it is
submitted towards the partial fulfillment of the requirement of MSBTE, Mumbai for the award of Diploma in
Computer Technology.

Prof . V. S. Dhande Prof. V. A. Parjane

(Project Guide) (Project Coordinator)

Prof. R. S. Patil Prof. G. N. Jorvekar Prof A. R. Mirikar

(Project Coordinator) (Head of Department) (Principal)

Department Of Computer Technology

Date: / /2024
Place: Kopargaon
 MAHARASHTRA STATE BOARD OF TECHINICAL
EDUCATION, MUMBAI

EXAMINERS CERTIFICATE

This is to certify that the project work entitled

“Certificate and Resume Builder”

Submitted By

Miss. Arote Diksha Appasaheb

Miss. Chavan Shreya Vilas
Miss. Dange Rucha Sachin
Miss. Dhanwate Rusha Dnyaneshwar

for the partial fulfillment of the requirement of Diploma in Computer Technology is examined and certified.

Internal Examiner External Examiner

(Name of Imternal) (Name of Imternal)

Date: / /2024
Place: Kopargaon

Department Of Computer Technology

 DECLARATION BY THE CANDIDATE

We declare that the thesis entitled “Certificate and Resume Builder” in Computer Technology is our own
work conducted under the supervision of Mr. V. S. Dhande at Department of Computer Technology,
Sanjivani K.B.P. Polytechnic, Kopergaon approved by Guide and Project Coordinator. We have put in more
than 96 Hrs of attendance with guide at the center.

We further declare that to the best of our knowledge; the thesis does not contain any part of any work
which has been submitted for the award of any diploma either in this Board or in any other State Board
without proper citation.

Place : Kopargaon

Date :………..…………

Arote Diksha Appasaheb Chavan Shreya Vilas

(Enrollment No.: 2100340140) (Enrollment No.
:2100340157)

Dange Rucha Sachin Dhanwate Rusha Dnyaneshwar

(Enrollment No.: 2100340160) (Enrollment No.: 2100340168)
 CERTIFICATE OF THE GUIDE

This is to certify that the work entitled “Certificate and Resume Builder” is a piece of project work done by
Miss. Arote Diksha Appasaheb (2100340140)
Miss. Chavan Shreya Vilas (2100340157)
Miss. Dange Rucha Sachin (2100340160)
Miss. Dhanwate Rusha Dnyaneshwar (2100340168)
Under my Guidance and Supervision for the diploma in Computer Technology at Sanjivani K.B.P.
Polytechnic, Kopargaon (Maharashtra) India. I certify that the candidate has put in an attendance of more
than 96 Hrs with me.

To the best of my knowledge and belief the thesis:

1- Embodies the work of the candidate herself.
2- Has duly been completed.
3- Fulfill the requirement of the requisites of the Department of Computer Technology.

Place: Kopargaon

Date :………………… Prof . V. S. Dhande

(Name & Signature of the Guide)

Department Of Computer Technology

 FORWARDING LETTER OF HEAD OF DEPARTMENT

The Project thesis entitled “Certificate and Resume Builder”. Submitted by

Miss. Arote Diksha Appasaheb (2100340140)
Miss. Chavan Shreya Vilas (2100340157)
Miss. Dange Rucha Sachin (2100340160)
Miss. Dhanwate Rusha Dnyaneshwar (2100340168)
In App Development under faculty of Diploma in Computer Technology is submitted to Department in Two
copies. The candidate has presented her pre submission seminar on her topic of research before the
committee and is found to be satisfactory based on the pre-submission report of subject expert. The candidate
has paid the necessary fees and there are no dues outstanding against her.

Prof . V. S . Dhande Mr. Ganesh N. Jorvekar

(Name & Signature of the Guide) (Name & Signature Head of Department)
Date:-…………………… Date: ……………………
Place:-Kopargaon Place:- Kopargaon.
 ACKNOWLEDGEMENT
We express our profound gratitude to our guide Prof. V. S. Dhande, Sanjivani K.B.P. Polytechnic, Kopargaon,
Department of Computer Technology, for enabling us to complete this thesis. His guidance and
encouragement have been valuable throughout this project journey. His availability, constant guidance, and
feedback have been instrumental in navigating the Complexities of this project. Additionally, we would like
to express our deepest appreciation to our project team members for their valuable contributions to this
project. Their diverse perspectives, feedback, suggestions, and overall contribution have significantly enriched
the quality and depth of this project. Their unwavering commitment to project excellence has been truly
inspiring.

We extend our appreciation to Prof. G. N. Jorvekar, Head of the Computer Technology Department, for their
support and encouragement. Their leadership and commitment to academic excellence have provided a
conducive environment for learning and research. We are also grateful to Prof. A. R. Mirikar, Principal of
Sanjivani K.B.P. Polytechnic, Kopargaon, for providing a supportive platform to complete this project within
the scheduled time. Their leadership and vision have been instrumental in fostering a culture of academic
excellence and innovation within the institution.

Furthermore, we acknowledge the invaluable contributions of all the faculty members of the Computer
Technology Department, Sanjivani K.B.P. Polytechnic, Kopargaon. Their expertise, guidance, and
encouragement have been integral to the successful completion of this project. We appreciate their
commitment to nurturing the intellectual growth and development of students. Lastly, we express our
gratitude to our family and friends for their support, and encouragement throughout this project journey. Their
belief in our abilities has been a constant source of strength and motivation. We are thankful for their
unwavering support, which have enabled us to pursue our academic aspirations with determination and
resilience.

In addition, we would like to thank the sponsors for their clear and concise requirements, which provided a
solid foundation for the execution of this project. We would like to express our gratitude to the technical
support staff who have provided invaluable assistance throughout this project. Their expertise, diligence, and
willingness to assist contributed significantly to the smooth execution of various technical aspects, thereby
enhancing the overall quality of the project. We appreciate their dedication to ensuring the seamless operation
of equipment and software systems, which has been paramount to the success of this endeavor.
We are also thankful to the academic community for fostering an environment conducive to intellectual
growth and scholarly pursuit. The exchange of ideas, scholarly debates, and academic discourse within
conferences, seminars, and workshops has been instrumental in shaping the direction and scope of this project.
Engaging with fellow researchers and scholars has enriched the depth of this thesis, and we are grateful for the
insights gained.

We want to express our sincere appreciation to the senior members of the academic community who have
provided us invaluable insights and guidance throughout our research. Their extensive experience, knowledge,
and expertise have been instrumental in shaping our research and have helped us gain a deeper understanding
of the subject matter. Thanks to their mentorship and constructive feedback, We have been able to refine our
ideas and approaches, which has greatly improved the quality and impact of our thesis. We are truly grateful
for their generous support and unwavering commitment to nurturing young scholars and practitioners like us.

Department Of Computer Technology

The successful completion of this thesis has been possible through the collective efforts, support, and
contributions of a multitude of individuals and entities. Each one has played a unique and indispensable role
in shaping this journey, and We am profoundly grateful for their unwavering support, guidance, and
encouragement. We acknowledge their invaluable contributions with deep appreciation and humility and look
forward to continuing this journey of growth, learning, and discovery in the pursuit of academic excellence
and innovation.

Place : Kopargaon Arote Diksha Appasaheb

(Enrollment No. 2100340140)
Date :………..…………

Chavan Shreya Vilas

(Enrollment No. 2100340157)

Dange Rucha Sachin

(Enrollment No. 2100340160)

Dhanwate Rusha Dnyaneshwar

(Enrollment No. 2100340168)
 TABLE OF CONTENTS

1. INTRODUCTION
1.1 Discussion of subjects ……………………………………………………………...
1.1.1 Discussion of Proposal ……………………………………………………….

2. LITERATURE REVIEW
2.1 Discussion of subjects ……………………………………………………………...
2.1.1 Discussion of Proposal ……………………………………………………….

3. PROBLEM DEFINITION AND SCOPE

3.1 Problem Definition ………………………………………………………………….
3.2 Scope …………………………………………………………………………………
3.3.1 Key features of the application include……………………………………………...

4. SOFTWARE REQUIREMENT
4.1 Requirement specification ………………………………………………………….
4.1.1 Normal Requirements ………………………………………………………...
4.1.2 Expected Requirements ……………………………………………………….
4.1.3 Excited Requirements ………………………………………………………...
4.2 Validation of Requirements ………………………………………………………...
4.2.1 Requirements ………………………………………………………………….
4.3 Software Requirements ……………………………………………………………..
4.4 Hardware Requirements …………………………………………………………...

5. SYSTEM DESIGN
5.1 Designing the system ………………………………………………………………..
5.1.1 System overview ……………………………………………………………...
5.1.2 Breakdown structure ………………………………………………………….
5.1.3 Implementation overview …………………………………………………….

6. MODELLING
6.1 Behavioural modelling ………………………………………………………………..
6.1.1 Usecase diagram ……………………………………………………………….
6.1.2 Sequence diagram ……………………………………………………………..
6.1.3 Activity diagram ………………………………………………………………
6.2 Functional modelling ………………………………………………………………...
6.2.1 Data flow diagram ……………………………………………………………...
6.2.1.1 Data flow diagram Level 0
6.2.1.2 Data flow diagram Level 1
6.2.1.3 Data flow diagram Level 2
6.3 Functional modelling
6.3.1 Component diagram …………………………………………………………………
6.3.2 Deployment diagram …………………………………………………………...
6.4 Mathematical model ……………………………………………………………….

Department Of Computer Technology

7. IMPLEMENTATION AND TESTING
7.1 Process ………………………………………………………………………………
7.2 Code …………………………………………………………………………………
7.3 Snapshots ……………………………………………………………………………
7.4 Testing ………………………………………………………………………………
7.4.1 Process ……………………………………………………………………….

8. RESULTS AND DISCUSSION

8.1 Dataset. …………………………………………………………………………..
8.2 Experimental setup……………………………………………………………...
8.3 Results……………………………………………………………………………
8.4 Performance metrics. …………………………………………………………...
8.5 Discussions. ……………………………………………………………………..

9. CONCLUSION

10. REFERENCES
 LIST OF FIGURES

1 System Design Diagram

2 Breakdown Structure

3 Use Case Diagram

4 Sequence Diagram

5 ER Diagram

6 Activity Diagram

7 Dataflow Diagram

8 Component Diagram

9 Deployment Diagram

Department Of Computer Technology

 LIST OF TABLES

1 List of Test Cases

2 First Defect Report

3 Second Defect Report

4 Third Defect Report

5 History of Releases

6 Performance Metrics
 LIST OF ABBREVATIONS

• Firebase: Realtime Database Service by Google

• CRUD: Create, Read, Update, Delete
• UI: User Interface
• UX: User Experience
• API: Application Programming Interface
• MVC: Model-View-Controller
• SDK: Software Development Kit
• IDE: Integrated Development Environment
• JSON: JavaScript Object Notation
• MVP: Minimum Viable Product

Department Of Computer Technology

 ABSTRACT

In today's rapidly evolving professional landscape, the importance of meticulously crafted resumes
and certificates stands as a cornerstone of career advancement. However, the traditional methods of
document creation often prove cumbersome and time-consuming, leading to a pressing need for
innovative solutions that streamline this process.This abstract introduces the Certificate and
Resume Builder, an Android application engineered to revolutionize the way individuals approach
documentation in the modern workforce.
The Certificate and Certificate and resume builder represents a culmination of cutting-edge
technology and user-centric design principles, aimed at simplifying the creation and management of
professional documents. At its core, the application provides users with an intuitive platform to
input a comprehensive array of personal and professional information. From educational
background and work experience to skills and achievements, users can effortlessly populate their
resumes and certificates with relevant data.
One of the hallmark features of the Certificate and Certificate and resume builder is its extensive
library of customizable templates and designs. Recognizing the diverse needs and preferences of
users across various industries, the application offers a wide range of options to suit every
professional style. Whether opting for a sleek and minimalist design or a bold and dynamic layout,
users have the flexibility to tailor their documents according to their unique specifications and
industry standards.
Moreover, the application integrates advanced editing tools that empower users to fine-tune every
aspect of their resumes and certificates. With real-time editing capabilities and instant preview
functionality, individuals can visualize changes instantly and make adjustments on-the-fly. This not
only enhances the efficiency of the document creation process but also ensures a polished and
professional end result.
Central to the appeal of the Certificate and Certificate and resume builder is its seamless integration
with cloud technology. By enabling users to synchronize their documents across multiple devices,
the application enhances accessibility and flexibility. Whether at home, in the office, or on the go,
individuals can access and edit their resumes and certificates with ease, ensuring that they are
always prepared for professional opportunities.
In response to the evolving needs of modern professionals, the application leverages cutting-edge
technology and user-centric design principles to streamline the document creation process,
empowering users to showcase their qualifications and achievements effectively. Through a user-
friendly interface, intuitive features, and a diverse range of customizable templates, the application
aims to revolutionize the way individuals approach document creation, ensuring polished and
professional results tailored to each user's unique preferences and requirements.
Driven by the imperative to address the inherent challenges of traditional document creation
methods, the "Certificate and Resume Builder" application embodies a commitment to innovation,
accessibility, and user empowerment. By harnessing the power of mobile technology and cloud-
based storage, the application offers unparalleled flexibility and convenience, allowing users to
create and manage their documents anytime, anywhere. Furthermore, the application's seamless
integration with social media platforms and professional networking sites enhances its utility,
enabling users to seamlessly share their resumes and certificates with prospective employers or
academic institutions.
As a transformative tool in the digital age, the "Certificate and Resume Builder" application heralds
a new era of efficiency, professionalism, and empowerment in the realm of professional
documentation.
In addition to its core functionalities, the Certificate and Certificate and resume builder offers
supplementary features to further assist users in their document creation endeavours. The inclusion
of video modules provides invaluable guidance on resume building best practices, offering tips and
insights to help individuals craft documents that resonate with employers and peers alike.
In conclusion, the development of the Certificate and Certificate and resume builder represents a
paradigm shift in the realm of professional documentation. By leveraging the power of technology
to streamline traditional processes, this application empowers individuals to present themselves
effectively in the competitive job market. With its intuitive interface, customizable templates, and
comprehensive editing tools, the app equips users with the resources they need to showcase their
skills, experiences, and achievements with confidence. As the workforce landscape continues to
evolve, tools like the Certificate and Certificate and resume builder serve as indispensable assets in
navigating the complexities of career advancement and personal growth.

Keywords:
Resume Builder, Certificate Builder, Android Application, Professional Documentation, Document
Creation, Cloud Synchronization, Real-time Editing, Customizable Templates, User-Centric
Design, Career Advancement.

Department Of Computer Technology

 CHAPTER 1
Introduction
In the dynamic landscape of contemporary professional endeavours, the
significance of well- crafted certificate and resumes cannot be overstated. These
documents serve as pivotal tools through which individuals convey their
qualifications, experiences, and achievements to prospective employers or academic
institutions. However, the process of creating and managing such documents has
long been fraught with challenges, from navigating formatting intricacies to the
constant need for updates and revisions. In response to these challenges, innovative
solutions have emerged, leveraging technology to streamline and enhance the
document creation process.

The evolution of professional documentation can be traced back to antiquity when

individuals relied on written records to establish their credentials and
accomplishments. As societies progressed, the need for standardized documentation
methods became evident, leading to the emergence of formats such as resumes and
certificates. These provided structured frameworks for communicating pertinent
information about an individual's background and qualifications. With the onset of
the digital age, document creation underwent a significant transformation. Word
processing software and online templates made it easier to format and customize
documents according to prevailing standards. However, despite these
advancements, challenges persisted in the form of manual input requirements and
limited functionality.

Despite the availability of word processing software and online templates,

traditional document creation methods posed several challenges for individuals.
Chief among these was the considerable time and effort required for manual
formatting and customization, often resulting in inconsistencies that diminished the
document's professionalism. Additionally, the need for frequent updates and
revisions presented logistical hurdles, particularly in fast-paced industries where
qualifications and experiences evolve rapidly. Moreover, the lack of accessibility
and flexibility in traditional methods constrained individuals' ability to create and
manage documents on-the-go, hindering their professional endeavours.

Recognizing the limitations of traditional approaches, developers began harnessing

technology to streamline the document creation process. This led to the
development of applications and software platforms tailored for professional
document creation, revolutionizing the way individuals approach this task. Cloud
technology, in particular, played a pivotal role by enabling seamless
synchronization across multiple devices, thereby granting individuals
unprecedented accessibility and flexibility.

Department Of Computer
Technology
The Certificate and Certificate and resume builderlication represents the
culmination of years of research and development aimed at addressing the
challenges inherent in traditional document creation methods. Leveraging the latest
technological advances, the application offers a comprehensive solution for creating
and managing professional resumes and certificates. Key features include real-time
editing, cloud synchronization, and a diverse array of customizable templates and
designs. Moreover, the application integrates supplementary features such as video
modules to provide guidance on best practices for resume building. By prioritizing
accessibility and inclusivity, the application ensures that individuals from diverse
backgrounds can effectively utilize its features. Furthermore, seamless collaboration
and sharing capabilities foster a sense of community and collective achievement
among users, enhancing their professional success and opportunities. With
extensive customization options and real-time feedback mechanisms, the
application empowers users to create documents that maximize their chances of
success in the competitive job market or academic arena.

In addition to the aforementioned features, the Certificate and Certificate and

resume builderlication incorporates several advanced functionalities to further
enhance the document creation process. These include AI-powered content analysis,
template suggestions based on industry standards, and integrations with professional
networking platforms for seamless document sharing.

The application's AI-powered content analysis feature utilizes natural language

processing algorithms to scrutinize the content of resumes and certificates. It
identifies key elements such as skills, experiences, and achievements, providing
users with valuable insights into areas that may require further elaboration or
refinement. By offering tailored suggestions for enhancing content clarity and
relevance, this feature helps users create documents that effectively resonate with
potential employers or academic institutions.

Furthermore, the Certificate and Certificate and resume builderlication leverages AI

to recommend templates based on industry standards and best practices. Drawing
from a vast database of professionally curated designs, the application suggests
templates that align with the user's field of expertise and career aspirations. Whether
the user is applying for a creative role in design or a technical position in
engineering, the application offers templates tailored to suit their specific needs and
preferences. This functionality not only streamlines the document creation process
but also ensures that users present themselves in a manner that aligns with industry
norms and expectations.
Department Of Computer Technology
Moreover, the application integrates seamlessly with professional networking
platforms such as LinkedIn, allowing users to import their professional profiles
directly into their resumes or certificates. This integration eliminates the need for
manual data entry and ensures accuracy and consistency across multiple platforms.
Users can also leverage the application's built-in sharing capabilities to distribute
their documents to prospective employers or academic

institutions with ease. Whether sharing via email, social media, or cloud storage
platforms, the application ensures that users' documents are delivered securely and
efficiently.

In conclusion, the Certificate and Certificate and resume builderlication represents

a comprehensive solution for modern document creation, leveraging advanced
technologies to streamline and enhance the process. From AI-powered content
analysis to template suggestions and seamless integrations with professional
networking platforms, the application offers a wealth of features designed to
empower users in their professional endeavours. By combining cutting-edge
technology with user-centric design principles, the application sets a new standard
for document creation tools, enabling individuals to craft polished and professional
documents that showcase their qualifications and achievements effectively.

The Certificate and Certificate and resume builderlication offers a comprehensive

array of features and functionalities designed to empower users in crafting
compelling and professional documents. One notable aspect is the extensive
customization options available, allowing users to tailor their resumes and
certificates to their specific needs and preferences. Beyond standard sections like
education and work experience, users can add customizable modules to highlight
unique skills or projects, enhancing the relevance and impact of their documents.
Moreover, the application provides design flexibility, enabling users to personalize
layouts, colour schemes, and branding elements to create documents that align with
their individual or corporate identity. This level of customization not only enhances
the visual appeal of the documents but also allows users to showcase their
personality and strengths effectively. Additionally, the application prioritizes
privacy and security, employing robust encryption protocols and giving users
control over the visibility and sharing settings of their documents. With continuous
updates and responsive support, the Certificate and Certificate and resume
builderlication remains at the forefront of document creation tools, empowering
users to present their qualifications and achievements with confidence and
professionalism in today's competitive landscape

Department Of Computer
Technology
 CHAPTER 2
Literature Review
The Literature Review section of this report delves into existing research, studies, and
publications relevant to the field of document creation, specifically focusing on resume and
certificate building. By examining previous works, we gain insights into the challenges,
trends, and innovations in this domain, which inform the development and implementation of
the Certificate and Certificate and resume builderlication.

 Automated Resume Generation:

A study by Harsha B Aladi, published in the International Journal of Science and
Research, explores the concept of automatic resume generation using cloud-based
applications. The research highlights the use of APIs from social networking sites like
Facebook, Gmail, and LinkedIn to gather user information automatically, thereby
simplifying the resume creation process. While this approach reduces manual data entry,
it also raises concerns about data privacy and accuracy. Nevertheless, it underscores the
potential of integrating third-party services to enhance the efficiency of resume building
applications.

 Technological Platforms for Application Development:

In the realm of software development, the choice of platforms and tools plays a crucial
role in determining the success of an application. The Literature Review examines
popular platforms such as Android Studio and Firebase, which are widely used for
developing mobile applications. Android Studio, with its rich set of features and tools,
provides developers with a flexible and efficient environment for building Android apps.
On the other hand, Firebase offers a comprehensive suite of services for backend
development, including real-time database synchronization and cloud storage. By
leveraging these platforms, developers can ensure the reliability, security, and scalability
of the Certificate and Certificate and resume builderlication.

 User-Centric Design Principles:

A user-centric approach is essential for designing applications that resonate with end-
users and provide a seamless user experience. Various studies have emphasized the
importance of usability, accessibility, and intuitiveness in application design. By
incorporating features such as customizable templates, real-time editing, developers can
cater to the diverse needs and preferences of users. Furthermore, the integration of video
modules for resume building guidance reflects a commitment to providing comprehensive
support for users throughout the document creation process.

Department Of Computer Technology

 Trends in Document Creation:
Document creation is a dynamic field that continually evolves in response to changing
industry trends and technological advancements. The Literature Review explores
emerging trends such as artificial intelligence (AI) integration advanced design
customization options enhance the aesthetic appeal and professionalism of documents.
Additionally, skill assessment and matching features can help users identify relevant job
opportunities and educational programs based on their profiles.

 Global Accessibility and Localization:

As the workforce becomes increasingly globalized, there is a growing need for
applications that support multiple languages and cater to diverse cultural contexts. The
Literature Review discusses the importance of language support and localization features
in enhancing the accessibility and usability of applications. By providing multilingual
interfaces and adapting content to local norms and preferences, developers can extend the
reach of the Certificate and Certificate and resume builderlication to a broader audience.
Impact of Digitalization on Document Creation: The literature review delves into the
broader context of digitalization and its impact on document creation practices. It
explores how advancements in technology, such as word processing software, online
templates, and cloud-based platforms, have transformed the way individuals create,
format, and share professional documents. Moreover, the review examines the
implications of digitalization for accessibility, collaboration, and version control in
document creation processes.

 Trends in Document Creation Tools and Platforms:

A comprehensive literature review would analyze emerging trends in document creation
tools and platforms. This includes exploring the rise of specialized software applications
and online platforms designed specifically for resume and certificate building. By
examining recent studies, reports, and industry publications, the review can identify key
features, functionalities, and user preferences driving the adoption of these tools.
Additionally, it may highlight innovative technologies, such as artificial intelligence (AI)
and machine learning, being integrated into document creation platforms to enhance
automation, personalization, and user experience.

 User Experience and Design Principles in Document Creation:

The literature review may also delve into the importance of user experience (UX) and
design principles in document creation applications. By drawing on research from human-
computer interaction (HCI) and usability studies, the review can explore how UX design
influences user engagement, satisfaction, and productivity in document creation tasks.
Moreover, it may examine best practices in interface design, information architecture, and
interaction design to understand how intuitive interfaces and streamlined workflows
enhance the usability of document creation tools.

DEPARTMENT OF COMPUTER TECHNOLOGY

 Cross-disciplinary Perspectives on Document Creation:
In addition to examining literature from computer science and information technology
fields, the review could incorporate perspectives from disciplines such as psychology,
communication studies, and education. This interdisciplinary approach allows for a
comprehensive understanding of the cognitive, communicative, and pedagogical aspects
of document creation. For example, studies from psychology may shed light on cognitive
processes involved in resume writing and decision-making, while research from
education may explore effective strategies for teaching document creation skills in
academic settings.

 Ethical and Social Implications of Automated Document Creation:

Finally, the literature review may address ethical and social implications associated with
the increasing automation of document creation processes. This includes considerations
related to data privacy, algorithmic bias, and digital literacy in the context of automated
resume and certificate builders. By critically examining these issues, the review can
contribute to discussions on responsible technology design and equitable access to digital
tools for document creation.

 In summary, the Literature Review provides a comprehensive overview of existing

research and trends in document creation, offering valuable insights into the
challenges, opportunities, and best practices in this domain. By synthesizing findings
from previous works, we gain a deeper understanding of the landscape in which the
Certificate and Certificate and resume builderlication operates, informing its
development and future iterations.

Department Of Computer Technology

 CHAPTER 3
Problem Definition and Scope

3.1 PROBLEM DEFINATION

In today's competitive job market, crafting compelling resumes and certificates is essential
for individuals seeking career advancement and opportunities. However, traditional methods
of document creation often prove to be cumbersome, time-consuming, and lack flexibility.
Manual formatting, limited customization options, and a lack of accessibility hinder
individuals' ability to showcase their skills effectively. There is a clear need for a streamlined
solution that addresses these challenges and empowers users to create professional documents
efficiently.
By harnessing the power of mobile technology and intuitive user interfaces, the application
offers a seamless and user-friendly experience for individuals of all backgrounds and skill
levels. Through an extensive range of customizable templates, users can effortlessly tailor
their resumes and certificates to reflect their unique personalities and professional aspirations.
Moreover, the application's cloud-based storage ensures that documents are securely stored
and readily accessible across multiple devices, eliminating the need for manual backups and
ensuring continuity in document management.
The application addresses the problem statement by providing users with a comprehensive
toolkit for creating and managing professional documents. By offering step-by-step guidance,
tutorials, and best practices, the application empowers users to navigate the document
creation process with confidence and ease. Additionally, features such as real-time editing,
spell-checking, and auto-formatting enhance the efficiency and accuracy of document
creation, enabling users to produce polished and professional documents in a fraction of the
time compared to traditional methods.
Furthermore, the application fosters collaboration and networking opportunities by
facilitating seamless sharing of documents via email, social media, and professional
networking platforms. This not only enhances users' visibility and reach but also fosters a
sense of community and support among users. By leveraging technology to bridge the gap
between traditional document creation methods and modern digital workflows, the
"Certificate and Resume Builder" application empowers individuals to present themselves
effectively in today's competitive job market, unlocking new opportunities for career growth
and success.
The problem statement revolves around the inefficiencies and limitations of existing
document creation methods. Users struggle with manual data entry, formatting
inconsistencies, and difficulty in accessing their documents across multiple devices.
Moreover, the lack of guidance and support further compounds these challenges, leaving
individuals frustrated and unable to present themselves effectively in the professional sphere.

DEPARTMENT OF COMPUTER TECHNOLOGY

 3.2 OBJECTIVES

The primary objective of the Resume and Certificate Builder Android application is to
provide users with a user-friendly, efficient, and versatile tool for creating professional
resumes and certificates. The project aims to address the inherent challenges individuals face
in crafting and managing these essential documents, thereby empowering them to showcase
their skills, experiences, and achievements effectively in the competitive job market.
Moreover, the optimization of the document creation process stands as a pivotal objective,
emphasizing efficiency and efficacy in transforming user input into polished resumes and
certificates. By streamlining tasks such as formatting, editing, and sharing, the project seeks
to alleviate the burdens associated with traditional document creation methods, enabling users
to focus on showcasing their skills and accomplishments effectively. This objective reflects a
dedication to providing practical solutions that save time and effort while upholding the
quality and professionalism of the generated documents.
Additionally, the project places a paramount emphasis on data security and privacy,
recognizing the sensitive nature of the information handled within the application. With
robust measures in place to safeguard user data, including secure authentication protocols and
encryption mechanisms.
Finally, the objective of continuous improvement underscores the project's dynamic nature,
acknowledging the evolving landscape of user preferences and technological advancements.
By prioritizing ongoing evaluation, iteration, and enhancement, the project aims to adapt to
changing user needs and market dynamics, ensuring that the application remains relevant,
responsive, and effective in meeting users' evolving expectations. This objective reflects a
forward-thinking approach that positions the project for sustained success and innovation in
the competitive realm of document creation applications.
The project aims to achieve the following objectives:

1. Simplifying Documentation Processes: The app aims to streamline the process of creating
and managing resumes and certificates, offering intuitive features and functionalities that
cater to users of all proficiency levels.
2. Enhancing Accessibility: By leveraging mobile technology, the project seeks to enhance
accessibility, enabling users to create and edit their documents on-the-go, anytime,
anywhere.
3. Providing Customization Options: The app offers a diverse range of templates, layouts,
and design elements, allowing users to customize their resumes and certificates to reflect
their individual style and professional identity accurately.
4. Offering Template Selection: The application provides a variety of professionally-
designed templates for resumes, catering to different industries and personal preferences,
ensuring users can create documents that stand out.

Department Of Computer Technology

5. Empowering Professional Growth: Ultimately, the objective of the project is to empower
individuals to present themselves effectively in the professional sphere, thereby
enhancing their prospects for career advancement and personal growth.

By achieving these objectives, the Certificate and Certificate and resume builderlication aims
to revolutionize the way individuals approach documentation, providing them with the tools
and resources they need to succeed in today's competitive job market.

3.3 SCOPE

The scope of this project encompasses the development of the Certificate and Resume
Builder Android application, aimed at providing users with a comprehensive solution for
creating and managing professional documents. The application will offer a user-friendly
interface, customizable templates, real-time editing, and cloud synchronization capabilities to
streamline the document creation process.
Furthermore, the scope extends to the provision of customizable templates, real-time editing
capabilities, and support for offline usage to cater to users' varying preferences and
requirements. The application will also incorporate advanced features such as spell-check,
grammar correction, and export options to ensure that documents adhere to professional
standards and can be shared in multiple formats.
Additionally, the project scope encompasses the development of modules for user
authentication, resume building, certificate generation, and collaboration, ensuring a holistic
approach to document creation. Integration with professional networking platforms, user
analytics, and customer support services will further enhance the application's functionality
and user experience.
Overall, the scope of the project is defined by its goal to deliver a user-centric and feature-
rich Android application that simplifies the process of creating and managing resumes and
certificates. By addressing the diverse needs and challenges faced by users in the document
creation process, the project aims to provide a valuable solution that enhances
professionalism, efficiency, and effectiveness in the professional sphere.

DEPARTMENT OF COMPUTER TECHNOLOGY

3.3.1 Key features of the application include:

1. Authentication Module: Users can register and log in securely to access the
application's features, ensuring that only authorized individuals can use the service.
2. Online Resume Builder Module: Users can create resumes online, leveraging
customizable templates and intuitive editing tools to tailor their documents to their
preferences and industry standards.
3. Offline Resume Builder Module: For users without internet connectivity, an offline
mode allows for creating resumes locally on their device, ensuring flexibility and
accessibility.
4.
5. Resume Builder Guide via Video Module: Comprehensive guidance and tips for
resume writing will be provided through video modules, assisting users in crafting
impactful and professional resumes.
6. Certificate Builder Module: Users can choose from a variety of certificate
templates, fill in the required fields, and generate personalized certificates effortlessly.

Department Of Computer Technology

 CHAPTER 4
SOFTWARE REQUIREMENT SPECIFICATION

4.1REQUIREMENT SPECIFICATION

4.1.1 NORMAL REQUIREMENTS

 Operating System Compatibility: Android OS version KitKat (4.4) or higher.

 Processor Compatibility: Support for ARMv7 architecture or higher.
 Memory Requirement: Minimum 1GB RAM.
 Storage Space: Adequate storage for app installation and user data.
 Network Connectivity: Support for Wi-Fi and mobile data.
 Authentication: Secure user login mechanism.
 Permission Handling: Proper access to device storage.
 User Interface Design: Intuitive and adherent to Android guidelines.
 Authentication Mechanism: Secure user registration and login.
 Compatibility Testing: Across various devices and screen sizes.

4.1.2 EXPECTED REQUIREMENTS

 The application should run smoothly on supported devices without performance

issues.
 Users should be able to create and edit resumes and certificates offline, with
sync options when online.
 Thorough testing on various Android devices to ensure consistent performance
across different screen sizes and resolutions.
 Implementation of robust security measures to safeguard user data and privacy.
 Regular updates to address bugs, enhance performance, and add new features
based on user feedback.
 Option for users to back up their resumes and certificates to prevent data loss.
 Ensure accessibility features for users with disabilities, such as screen
reader compatibility and text resizing.
 Responsive customer support channels for addressing user queries and issues in a
timely manner.

DEPARTMENT OF COMPUTER TECHNOLOGY

4.1.3 EXCITED REQUIREMENTS
 Outstanding Performance: Achieving exceptional speed and responsiveness.
 Seamless Integration: Ensuring compatibility with various Android devices.
 Rigorous Quality Assurance: Thorough testing to ensure reliability.
 Iterative Enhancement: Continual improvement through feedback-driven
development.
 Enhanced User Experience: Focusing on intuitive design and usability.

4.2 VALIDATION OF REQUIREMENT

4.2.1 REQUIREMENTS

 Performance Testing: Ensuring efficient operation within specified

hardware constraints.
 Cross-Browser Testing: Verification of compatibility with Google Chrome,
Microsoft Edge, and Mozilla Firefox.
 User Testing: Visual inspection and assessment of responsiveness and
user experience.

4.3 SOFWARE REQUIREMENT

 Operating System: Android 4.4 (KitKat) or higher.

 Development Language: Java and Kotlin.
 Integrated Development Environment (IDE): Android Studio.
 Database: SQLite for local storage.
 External Libraries: Retrofit for networking, Gson for JSON parsing.
 UI Framework: Material Design Components.
 Version Control: Git.

4.4 HARDWARE REQUIREMENT

 Processor: ARMv7 architecture or higher.
 RAM: Minimum 1GB RAM.
 Storage: Adequate storage for app installation.
 Connectivity: Wi-Fi and mobile data support.
 Screen Size: Compatible with various screen sizes and resolutions.
 Power Management: Optimize battery consumption for prolonged usage.

Department Of Computer Technology

4.5 FUNCTIONAL REQUIREMENTS
4.5.1 User Authentication
The application must include a user authentication feature to ensure that only
registered users can access its functionalities. Users should be able to create an
account with a unique username and password, and they should also have the option to
log in using existing credentials. Additionally, the authentication process should
include security measures such as password encryption and account verification to
protect user accounts from unauthorized access.

4.5.2 Document Creation and Editing

Users should be able to create, edit, and customize their resumes and certificates
within the application. This functionality should include options to input personal
information, educational background, work experience, skills, and any other relevant
details. Users should also have access to a variety of templates and formatting options
to tailor their documents according to their preferences and industry standards.
Furthermore, the editing interface should be intuitive and user-friendly, allowing users
to make changes easily and preview their documents before finalizing them.

4.5.3 Cloud Synchronization

The application should support cloud synchronization to ensure that users can access
their documents from multiple devices seamlessly. Changes made to a document on
one device should be automatically synced to the user's account and reflected on other
devices where the application is installed. This functionality requires integration with
a cloud storage service such as Google Drive or Dropbox, and it should include
options for manual and automatic synchronization settings.

4.5.4 Export and Sharing Options

Once a resume or certificate is finalized, users should have the option to export it in
various formats such as PDF or Word document. Additionally, users should be able to
share their documents directly from the application via email, messaging apps, or
social media platforms. The sharing functionality should allow users to send their
documents to potential employers, colleagues, or academic institutions with ease,
enhancing the application's utility and convenience.

4.5.5 Notification System

The application should include a notification system to keep users informed about
important updates, reminders, or events related to their documents. Notifications could
include reminders to update their resumes, alerts about job opportunities or
networking events, or notifications about changes made by collaborators (if
applicable). Users should have the ability to customize their notification preferences
and settings to suit their preferences and needs.

DEPARTMENT OF COMPUTER TECHNOLOGY

 CHAPTER 5
SYSTEM DESIGN
5.1 DESIGNING THE SYSTEM

5.1.1 SYSTEM OVERVIEW

The system is designed as a comprehensive Android application called the "Resume
and Certificate Builder." It consists of several modules, each serving a specific function
to facilitate the creation and management of professional documents. The primary
modules include Authentication, Online Resume Builder, Offline Resume Builder,
Resume Builder Guide via Video, and Certificate Builder.
1. The Authentication module serves as the entry point to the application, ensuring that
only authorized users can access its features. Users are required to register an account
with valid credentials, which are then used for secure login. This module establishes a
foundation for user privacy and data security throughout the application.

2. The Online Resume Builder module empowers users to craft resumes directly within
the app while connected to the internet. It offers a range of customizable templates
and formatting options, allowing users to tailor their resumes to specific job
requirements and personal preferences. With real-time editing capabilities, users can
see instant updates as they input their information, facilitating a seamless and efficient
resume-building process.

3. Complementing the online functionality, the Offline Resume Builder module enables
users to create resumes without an internet connection. This feature caters to users in
areas with limited connectivity or those who prefer to work offline. Once completed,
users can generate PDF versions of their resumes, ensuring accessibility and
portability across devices.

4. The Resume Builder Guide via Video module enhances user experience by providing
educational resources on resume writing. Through a curated collection of video
tutorials and guides, users can learn best practices, tips, and strategies for crafting
compelling resumes that effectively showcase their skills and experiences. This
module serves as a valuable resource for users seeking to improve their resume-
writing abilities and increase their chances of success in the job market.

5. Additionally, the Certificate Builder module offers users a convenient way to create
professional certificates. With a variety of templates to choose from, users can
customize their certificates with relevant information and designs. Whether
commemorating achievements, certifications, or awards, this module enables users to
produce polished and professional-looking certificates with ease.
Department Of Computer Technology
 Together, these modules form a cohesive system designed to empower users in their
professional endeavors. By providing accessible tools, valuable resources, and user-
friendly features, the system aims to simplify the process of document creation and
enhance users' opportunities for career advancement and personal growth.

 Authentication Module:

The Authentication module ensures secure access to the application's features by requiring
users to register an account with valid credentials.
It establishes a foundation for user privacy and data security throughout the application,
safeguarding sensitive information from unauthorized access.

 Online Resume Builder Module:

This module empowers users to create professional resumes directly within the app while
connected to the internet.
Users have access to a diverse range of customizable templates and formatting options,
enabling them to tailor their resumes to specific job requirements and personal
preferences. Real-time editing capabilities allow users to see instant updates as they input
information, facilitating a seamless and efficient resume-building process.

 Offline Resume Builder Module:

Complementing the online functionality, the Offline Resume Builder module enables users to
create resumes without an internet connection.
This feature is particularly beneficial for users in areas with limited connectivity or those who
prefer to work offline.
Once completed, users can generate PDF versions of their resumes, ensuring accessibility and
portability across devices.

 Resume Builder Guide via Video Module:

This module enhances the user experience by providing educational resources on resume
writing through curated video tutorials and guides.
Users can learn best practices, tips, and strategies for crafting compelling resumes that
effectively showcase their skills and experiences.
The module serves as a valuable resource for users seeking to improve their resume-writing
abilities and increase their chances of success in the job market.
 Certificate Builder Module:

The Certificate Builder module offers users a convenient way to create professional
certificates for commemorating achievements, certifications, or awards.

DEPARTMENT OF COMPUTER TECHNOLOGY

Users have access to a variety of templates to choose from, and they can customize their
certificates with relevant information and designs.
This module enables users to produce polished and professional-looking certificates with
ease, enhancing their credibility and recognition in various professional or educational
settings.

Figure: System Design Diagram

5.2 FEASIBILITY STUDY:
Feasibility study is conducted once the problem is clearly understood. Feasibility
study is a high-level capsule version of the entire system analysis and design process. The
objective is to determine quickly at a minimum expense how to solve a problem. The
purpose of feasibility is not to solve the problem but to determine if the problem is worth
solving.
The system has been tested for feasibility in the following points.
1. Technical Feasibility
2. Economical Feasibility
3. Operational Feasibility.
5.2.1 TECHNICAL FEASIBILITY: -
Technical feasibility assesses whether the proposed system can be implemented using
available technology and resources. In the case of the Resume and Certificate Builder project,
the technical feasibility study involved evaluating the compatibility of the application with
existing hardware and software platforms. This includes assessing whether the application
can run effectively on Android devices, whether the required development tools and libraries
are available, and whether any technical challenges or limitations may hinder the
implementation process. Additionally, considerations such as data security, scalability, and
integration with external services were taken into account to ensure that the proposed system
can meet technical requirements and standards.
Department Of Computer Technology
 Compatibility with Hardware and Software Platforms:
Assessing compatibility involves ensuring that the application can run effectively on
Android devices, as mentioned. This includes considerations for various screen sizes,
resolutions, and hardware specifications. Compatibility with other platforms such as iOS,
web browsers, and desktop environments may also be evaluated depending on project
requirements.
 Availability of Development Tools and Libraries:
This aspect involves verifying the availability of necessary development tools like
integrated development environments (IDEs), version control systems, and software
libraries. Libraries and frameworks for tasks such as UI design, database management,
and networking need to be assessed for suitability and availability within the chosen
development environment.
 Technical Challenges and Limitations:
Identifying potential technical challenges or limitations early in the project lifecycle is
rucial. This may include issues related to performance optimization, resource constraints
on mobile devices, or compatibility issues with specific versions of operating systems.
Solutions or workarounds for identified challenges should be proposed to mitigate their
impact on project development and deployment.
 Data Security:
Ensuring data security is paramount, especially when dealing with sensitive information
like personal resumes and certificates. This involves implementing robust encryption
mechanisms, secure authentication methods, and compliance with relevant data protection
regulations (e.g., GDPR, CCPA). Measures to prevent unauthorized access, data
breaches, and data loss must be incorporated into the system design and development
process.
 Scalability:
The application should be designed to accommodate future growth in user base and data
volume. This includes considerations for scaling up server infrastructure, optimizing
database performance, and implementing caching mechanisms to handle increased
traffic.Scalability testing should be conducted to assess the system's ability to handle
varying loads and to identify potential bottlenecks or performance issues.
 Integration with External Services:
If the application relies on external services or APIs for functionality such as document
generation, cloud storage, or social media integration, compatibility and reliability of
these services need to be evaluated. Robust error handling mechanisms should be
implemented to gracefully handle failures or disruptions in external service availability.
 5.2.2 ECONOMICAL FEASIBILITY: -
Economic feasibility evaluates whether the proposed system is financially viable and
cost-effective. This involves analyzing the costs associated with developing,
implementing, and maintaining the system compared to the potential benefits and returns
on investment. For the Resume and Certificate Builder project, economic feasibility was
assessed by estimating the development costs, including personnel, hardware, software,

DEPARTMENT OF COMPUTER TECHNOLOGY

and other resources.

Department Of Computer Technology

 Development Costs:
Development costs encompass expenses related to personnel, hardware, software licenses,
development tools, and other resources required to build the application.
Personnel costs include salaries, benefits, and training expenses for developers, designers,
testers, and other team members involved in the project.
Hardware costs may include purchasing or upgrading computers, servers, mobile devices,
and other equipment necessary for development and testing.
Software costs involve purchasing licenses or subscriptions for development tools,
libraries, frameworks, and third-party services used in the project.
 Implementation Costs:
Implementation costs include expenses associated with deploying the application,
configuring servers, setting up databases, and integrating with external services. Costs
related to data migration, user training, and technical support during the implementation
phase should also be considered.
 Maintenance Costs:
Maintenance costs entail ongoing expenses for maintaining and supporting the application
post-deployment. This includes bug fixes, updates, security patches, and enhancements to
keep the system running smoothly. Costs associated with hosting, server maintenance,
database administration, and technical support should be factored into the long-term
maintenance budget.
 Revenue Streams:
Identifying potential revenue streams is crucial for assessing the project's economic
feasibility. This may include revenue sources such as subscription fees, one-time
purchases, in-app purchases, advertising revenue, or premium features. The pricing
strategy, pricing tiers, and payment models (e.g., freemium, subscription-based) should be
carefully evaluated to maximize revenue generation while remaining competitive in the
market.
 Cost-Benefit Analysis:
Conducting a cost-benefit analysis involves quantifying the expected costs and benefits
associated with the project over its lifecycle .The benefits may include revenue
generation, cost savings, improved productivity, enhanced customer satisfaction, and
competitive advantage.
By comparing the total costs with the projected benefits, stakeholders can determine
whether the expected returns justify the investment in the project.
 Return on Investment (ROI):

ROI calculations help assess the efficiency and profitability of the project by measuring
the ratio of net benefits to the total investment.
A positive ROI indicates that the project is likely to generate returns that exceed the
initial investment, making it economically viable.

DEPARTMENT OF COMPUTER TECHNOLOGY

5.2.3 OPERATIONAL FEASIBILITY: -
Operational feasibility examines whether the proposed system can be effectively integrated
into existing operations and processes. This involves assessing how the system will impact
daily workflows, user productivity, and organizational efficiency. For the Resume and
Certificate Builder project, operational feasibility was evaluated by considering factors such
as user acceptance, training requirements, and organizational readiness for change. User
feedback and stakeholder input were solicited to assess user preferences, identify potential
barriers to adoption, and develop strategies to mitigate risks. Additionally, plans for user
training, system deployment, and ongoing support were developed to ensure smooth
implementation and operation of the system.

5.1.2 BREAKDOWN STRUCTURE

Authentication Module:

 This module enables users to register and log in securely to access the application's
features.
 Key functionalities include user registration, login authentication, and session
management.
Online Resume Builder Module:

 This module empowers users to create resumes online with customizable templates and
layouts.
 Users must register and log in to access the online resume building functionality.
 Features include template selection, personal information input, educational and
professional history input, and real-time preview.
Offline Resume Builder Module:

 Users can create resumes offline in this module, eliminating the need for an internet
connection.
 After registration and login, users input their personal, educational, and professional
information.
 Upon completion, users can generate a PDF resume locally on their device.

Resume Builder Guide via Video Module:

 This module provides users with guidance on creating effective resumes through video
tutorials.
 Users can access various tutorials covering resume writing tips, formatting guidelines,
and best practices.
 The video tutorials aim to assist users in crafting compelling resumes that stand out to
recruiters.

Department Of Computer Technology

Certificate Builder Module:

 Users can create custom certificates using pre-designed templates in this module.
 Features include template selection, field input for personalized information, and
certificate preview.
 Upon completion, users can download the certificate in PDF
format. Figure: Breakdown Structure
The system architecture ensures secure authentication, seamless access to online and offline
resume building functionalities, comprehensive guidance through video tutorials, and easy
creation of custom certificates. Each module is designed to enhance user experience and
streamline the process of creating professional documents.

5.1.3 IMPLEMENTATION OVERVIEW

5.1.3.1 TECHNOLOGICAL STACK:

 Development Environment:
Android Studio: The official Integrated Development Environment (IDE) for Android
app development, providing powerful tools and features for coding, debugging, and
testing.
 Backend Services:
Firebase: A comprehensive platform provided by Google for developing mobile and
web applications. Firebase offers various services such as Authentication, Realtime
Database, Cloud Firestore, Cloud Storage, and Cloud Messaging, which are essential
for building and deploying feature-rich Android applications.

5.1.3.2 FUNCTIONALITY IMPLEMENTATION:

 User Authentication:
Firebase Authentication: Enables secure user authentication using email/password, phone
number, or third-party providers like Google and Facebook, ensuring that only authorized
users can access the app's features.

 Realtime Data Storage:

Firebase Realtime Database or Cloud Firestore: Stores user-generated data such as resume
details and certificate information in a flexible and scalable cloud database, allowing
seamless synchronization across devices in real-time.

 Cloud Storage:
Firebase Cloud Storage: Provides secure and scalable storage for user-uploaded files,
including resume templates, profile pictures, and certificates, ensuring reliable access to
multimedia content.

DEPARTMENT OF COMPUTER TECHNOLOGY

 Backend Logic:
Firebase Cloud Functions: Allows the execution of server-side code in response to events
triggered by Firebase services, enabling the implementation of custom backend logic for
tasks such as data validation, notifications, and document generation.

 Offline Capabilities:
Firebase Firestore Offline Persistence: Enables the app to function seamlessly without an
internet connection by caching data locally and synchronizing changes with the backend
when connectivity is restored, ensuring a consistent user experience in offline mode.

 Remote Config and Analytics:

Firebase Remote Config and Analytics: Provides tools for remotely configuring app settings,
conducting A/B testing, and analyzing user behavior, allowing for data-driven decision-
making and continuous optimization of the app's features and performance.

5.1.3 SOFTWARE METHODOLOGY:

 Application System Development – A Life Cycle Approach

Although there are a growing number of applications (such as decision support systems)
that should be developed using an experimental process strategy such as prototyping, a
significant amount of new development work continues to involve major operational
applications of broad scope. The application systems are large highly structured. User task
comprehension and developer task proficiency is usually high. These factors suggest a linear
or iterative assurance strategy. The most common method for this stage class of problems is a
system development life cycle modal in which each stage of development is well defined and
has straightforward requirements for deliverables, feedback and sign off. The system
development life cycle is described in detail since it continues to be an appropriate
methodology for a significant part of new development work.
The basic idea of the system development life cycle is that there is a well-defined
process by which an application is conceived and developed and implemented. The life cycle
gives structure to a creative process. In order to manage and control the development effort, it
is necessary to know what should have been done, what has been done, and what has yet to
be accomplished. The phrases in the system development life cycle provide a basis for
management and control because they define segments of the flow of work, which can be
identified for managerial purposes and specifies the documents or other deliverables to be
Department Of Computer Technology
produced in each phase.

DEPARTMENT OF COMPUTER TECHNOLOGY

The software methodology adopted for this project encompasses both the object-oriented
methodology and the application system development methodologies. Here's a detailed
description of these methodologies:

 Object-Oriented Methodology:
Object-oriented methodology is a software development approach that focuses on modeling
software systems as collections of objects that interact with each other. This methodology
emphasizes the use of encapsulation, inheritance, and polymorphism to create modular,
reusable, and maintainable software components. Object-oriented analysis and design
(OOAD) techniques, such as use case modeling, class diagrams, and sequence diagrams, are
employed to visualize and define the system's requirements and design. By modeling
software systems in terms of objects and their interactions, this methodology promotes code
reusability, flexibility, and scalability.

 Application System Development – A Life Cycle Approach:

This methodology involves a structured approach to software development, particularly
suited for large-scale, operational applications with well-defined requirements and
deliverables. It follows a system development life cycle (SDLC) model, which consists of
sequential phases, each with defined objectives, activities, and deliverables. The SDLC
phases typically include requirements analysis, system design, implementation, testing,
deployment, and maintenance. This approach provides a systematic framework for managing
and controlling the development process, ensuring that all necessary tasks are completed, and
deliverables are produced according to schedule and quality standards. The system
development life cycle provides a structured framework for conceiving, developing, and
implementing software applications. It defines a well-defined process that guides the
development effort and ensures that all aspects of the project are managed and controlled
effectively. By breaking down the development process into distinct phases, the SDLC
facilitates project management, resource allocation, and risk mitigation. Additionally, it
defines clear requirements for deliverables, feedback, and sign-off, enabling stakeholders to
monitor progress and make informed decisions throughout the project lifecycle.

Department Of Computer Technology

Overall, the combination of object-oriented methodology and application system
development methodologies provides a comprehensive approach to software development,
balancing the benefits of object-oriented design principles with the structured framework of
the SDLC. This approach ensures that the project follows best practices, meets stakeholder
expectations, and delivers a high-quality software solution that aligns with the project's
objectives and requirements.
The phases in the life cycle for information system development are described
differently by different writers, but the differences are primarily in the amount of necessity
and manner of categorization. There is a general agreement on the flow of development steps
and the necessity for control procedures at each stage.
The information system development cycle for an application consists of four major stages.
1) Definition.
2) Design.
3) Development.
4) Installation and Operation.
The first stage of the process, which defines the information requirements for a feasible cost
effective system. The requirements are then translated into a physical system of forms,
procedures, programs etc., by the system design, computer programming and procedure
development. The resulting system is test and put into operation. No system is perfect so
there is always a need for maintenance changes. To complete the cycle, there should be a post
audit of the system to evaluate how well it performs and how well it meets the cost and
performance specifications. The stages of definition, development and installation and
operation can therefore be divided into smaller steps or phrases as follows.
 DEFINITION: -
Proposed definition: Preparation of request for proposed applications.
Feasibility assessment: Evaluation of feasibility and cost benefit of proposed system.
Information requirement
analysis: Determination of information needed.

DEPARTMENT OF COMPUTER TECHNOLOGY

 DESIGN: -
Conceptual design: User-oriented design of application development.

 Physical system design: Detailed design of flows and processes in applications

processing system and preparation of program specification.

 DEVELOPMENT: -
Program development: Coding and testing of computer programs.
Procedure development: Design of procedures and preparation of user instructions.

 INSTALLATION AND OPERATION: -

Conversion: Final system test and conversion.
Operation and Maintenance: Month to month operation and maintenance
Post Audit: Evaluation of development process, application system and
results of use at the completion of each phase, formal approval
sign-off is required from the users as well as from the manager
of the project development.

Department Of Computer Technology

 CHAPTER 6
Modelling
6.1 BEHAVIORAL MODELLING
6.1.1 USECASE DIAGRAM

The use case diagram for the "Resume and Certificate Builder" Android app project outlines
the primary interactions between users and the system. Here's a textual description of each
use case:
1. Register: This use case allows users to register for an account on the app by providing
necessary information such as email, username, and password.
2. Login: Users can log in to their accounts using their credentials (email/username and
password) to access the app's features and functionalities.
3. Build Resume Online: Users have the option to create their resumes online within the app.
They can input their personal, educational, and professional information using the
provided templates and tools.
4. Build Resume Offline: Alternatively, users can create their resumes offline, which may
involve downloading templates or working without an internet connection. The app allows

DEPARTMENT OF COMPUTER TECHNOLOGY

users to fill in their information and generate resumes locally on their devices.

Department Of Computer Technology

5. Access Resume Guide Videos: This use case enables users to access tutorial videos or
6. guides that provide assistance in creating effective resumes. Users can watch these videos
to understand the process and best practices for resume building.
7. Create Certificate: Users can utilize the app to design and generate certificates for various
purposes. They may choose from available templates, customize the content, and produce
certificates suitable for printing or sharing digitally.
These use cases cover the core functionalities of the app, allowing users to manage their
resumes, access educational resources, and create certificates conveniently. Additionally,
administrators have the capability to log in to the system, likely to perform administrative
tasks such as managing user accounts or content moderation.

6.1.2 USECASE DIAGRAM

An Entity-Relationship (ER) diagram for the "Resume and Certificate Builder" Android app
project illustrates the relationships between various entities involved in the system. Here's a
breakdown of the components typically included in an ER diagram for this project:

Entities:
User: Represents individuals using the application.
Template: Represents the available resume and certificate templates.
Document: Represents the finalized resumes and certificates created by users.

DEPARTMENT OF COMPUTER TECHNOLOGY

Attributes:
User attributes: UserID, Username, Email, Password, etc.
Template attributes: TemplateID, TemplateName, TemplateType, etc.
Document attributes: DocumentID, DocumentType, Content, DateCreated, etc.
Relationships:

User-Template Relationship: Indicates that a user can select multiple templates, and each
template can be selected by multiple users.
User-Document Relationship: Indicates that a user can create multiple documents, and each
document is associated with a single user.
Template-Document Relationship: Indicates that each document is based on a single
template, and each template can be used to generate multiple documents.
Cardinality:

One-to-Many: For example, a user can create multiple documents, but each document is
associated with only one user.
Many-to-Many: For example, multiple users can select the same template, and a template can
be selected by multiple users.

Attributes of Relationships:
UserID and TemplateID: Attributes that link users and templates in the user-template
relationship.
UserID and DocumentID: Attributes that link users and documents in the user-document
relationship.
TemplateID and DocumentID: Attributes that link templates and documents in the template-
document relationship.

Primary Keys and Foreign Keys:

UserID, TemplateID, and DocumentID may serve as primary keys in their respective tables.
UserID and TemplateID may also serve as foreign keys linking the User and Template tables
in the user-template relationship.
Optional Attributes:

Overall, an ER diagram provides a visual representation of the data model for the "Resume
and Certificate Builder" Android app project, depicting the entities, relationships, and
attributes involved in the system's database schema.

Department Of Computer Technology

6.1.3 SEQUENCE DIAGRAM

A sequence diagram for the "Resume and Certificate Builder" Android app project illustrates
the interactions between different components or actors within the system during specific
user actions or scenarios. Here's a textual description of a sequence diagram representing the
process of creating a resume online:

1. User: Initiates the process by selecting the option to build a resume online from the
app's interface.
2. App Interface: Receives the user's request and displays the resume building
interface, prompting the user to input their personal, educational, and professional
information.
3. User Input: Enters the required information into the respective fields provided by the
app, such as name, contact details, education history, work experience, skills, etc.
4. App Backend (Firebase): Receives the user's input and processes the data,
validating it for completeness and correctness.
5. Database Query: The app backend queries the Firebase database to check if the
user has previously saved any resume drafts or templates.
6. Resume Template Selection: If the user has saved templates, the app
backend retrieves them from the database and presents them to the user for
selection. Otherwise, the app offers default templates.
7. User Selection: The user selects a resume template from the options provided by
the app.
8. Data Population: The app backend populates the selected resume template with the
user's inputted data, filling in the appropriate sections and fields.
9. Preview: The app displays a preview of the generated resume to the user,
allowing them to review and make any necessary adjustments.
10. Finalization: Upon confirming the resume's content and layout, the user selects the
option to finalize and save the resume.
11. Database Update: The app backend saves the finalized resume to the
Firebase database, associating it with the user's account for future access.
12. Confirmation: The app interface confirms to the user that the resume has been
successfully saved, providing options for further actions.

DEPARTMENT OF COMPUTER TECHNOLOGY

Department Of Computer Technology
6.1.4 SEQUENCE DIAGRAM

DEPARTMENT OF COMPUTER TECHNOLOGY

The activity diagram illustrates the flow of activities within the "Resume and Certificate
Builder" Android app project. Here's a breakdown of the theory behind the diagram:

User Interaction with UI: The process begins with the user interacting with the User
Interface (UI) of the application. This includes actions such as selecting templates,
customizing documents, and submitting the customization.

User Authentication: Before proceeding with customization and document generation, the
app verifies the user's authentication status. If the user is authenticated (i.e., logged in), they
can proceed with the document creation process. If not, they are prompted to log in or
register.

Template Selection and Customization: Once authenticated, the user can select a template
from the Template Repository and customize it according to their preferences. This may
involve entering personal details, educational background, professional experience, etc.

Document Generation: After customization, the app generates the resume or certificate
based on the selected template and user input. This step involves processing the data and
formatting it into a cohesive document.

Document Storage: If the document is successfully generated, it is then stored in the

database for future access. This ensures that users can retrieve their resumes and certificates
whenever needed.

Error Handling: Throughout the process, error handling mechanisms are in place to handle
various scenarios such as authentication failures, template selection errors, customization
issues, and document generation errors. If any step encounters an error, the process stops,
and the user is informed accordingly.

Overall, the activity diagram provides a visual representation of the sequential flow of
activities within the app, guiding users through the document creation process while
ensuring a seamless and error-free experience.

Department Of Computer Technology

 6.2. FUNCTIONAL MODELLING
6.2.1 DATA FLOW DIAGRAM

6.2.1.1 DFD Level 0

Figure 6.2.1.1 DFD Level 0

The User provides input data such as authentication credentials and details for building
resumes and certificates.
The System Core processes this input data by performing tasks such as authentication,
querying the database for templates and storing finalized documents.
Data flows between the User and the System Core, with various actions and processes being
triggered based on the provided input.
This Level 0 DFD provides an overview of the main data flows within the "Resume and
Certificate Builder" Android app project, focusing on the interactions between the user and
the core system components.

6.2.1.2 DFD Level 1

The User provides input data to the system, including authentication details and preferences
for resume and certificate templates.
The System Core processes the input data by performing tasks such as authentication,
querying the database, generating resumes and certificates, and managing notifications.
Various subsystems within the System Core, such as the Generation Subsystem and
Notification Subsystem, handle specific tasks related to document generation and user
notifications.
Data flows between the User and the System Core, with different subsystems responsible for
processing and managing the data flow within the system.

This level 1 DFD succinctly delineates how users interact with Spark Enterprises' system,
showcasing processes for accessing information, providing feedback, and engaging with the
company's offerings.

DEPARTMENT OF COMPUTER TECHNOLOGY

 Figure 6.2.1.2 DFD Level 1

Figure 6.2.1.3 DFD level 2

At the heart of the system is the User Interface module, where users interact with the
application to input their personal, educational, and professional data. This data is then passed
on to various modules for further processing.
The Authentication Module handles user authentication data, including login credentials and
authentication status. When a user attempts to log in or register, their authentication data is
verified against the stored credentials in the system. If successful, the user gains access to the
application's features; otherwise, access is denied.
The Template Repository module manages a collection of resume and certificate templates
available to users. When a user selects a template from the repository, the template data is
retrieved and provided to the User Interface for display and customization.
The Database Access Module acts as an intermediary between the application and the
Firebase database. It handles database queries to retrieve user data, template information, and
finalized documents from the database. Additionally, it facilitates the storage of newly
created documents back into the database for future access.

Department Of Computer Technology

The Generation Engine is responsible for dynamically generating resumes and certificates
based on user input and selected templates. It processes the user's data along with the chosen
template to produce a customized document, which is then passed back to the User Interface
for preview and finalization.
Finally, the Database Storage module manages the storage of finalized documents in the
Firebase database. Once a document is finalized by the user, it is stored securely in the
database for future retrieval and access.
Overall, the DFD Level 2 illustrates how data flows between the different modules of the
"Resume and Certificate Builder" Android app project, highlighting the intricate interactions
and processing steps involved in the application's functioning.

6.3. FUNCTIONAL MODELLING

5.3.1 COMPONENT DIAGRAM

The Component Diagram depicts the various components of the "Resume and Certificate
Builder" Android app project and their interactions:

User Interface: This component represents the interface through which users interact with the
application. Users can authenticate, select templates, and input data through the User
Interface.Authentication Module: Responsible for authenticating users, this module verifies
user credentials provided during the login process. It interacts with the Database Access
Module to verify user credentials.Template Repository: This component houses a collection
of resume and certificate templates. Users can browse and select templates from the
repository through the User Interface.Database Access Module: Facilitates communication
with the Firebase database, enabling the retrieval and storage of user data and template
information. It interacts with both the User Interface and the Generation Engine to retrieve
user input data and store finalized documents.Generation Engine: Dynamically generates
resumes and certificates based on user input data and selected templates. It retrieves data
from the Database Access Module and stores finalized documents in the Database Storage
component. Database Storage: Acts as the repository for storing finalized documents,
including resumes and certificates. It receives documents generated by the Generation Engine
and stores them securely in the Firebase database.

DEPARTMENT OF COMPUTER TECHNOLOGY

Department Of Computer Technology
6.3.2 DEPLOYMENT DIAGRAM

A Deployment Diagram for the "Resume and Certificate Builder" Android app project
showcases the deployment architecture, illustrating the distribution of components across
various nodes:
User Devices: Represents the devices used by end-users to access the application. These
devices include smartphones and tablets running the Android operating system.
Google Firebase Cloud: Firebase Cloud serves as the backend infrastructure for the
application. It hosts the application's database, authentication services, and cloud functions.
Firebase Cloud provides a scalable and reliable platform for storing user data and managing
application logic.
Android Studio Development Environment: Developers utilize Android Studio, an Integrated
Development Environment (IDE), for building and testing the application. Android Studio
provides a suite of tools and resources for Android app development, including code editors,
debuggers, and emulators.
Google Play Store: The Google Play Store serves as the distribution platform for deploying
the application to end-users. Users can download and install the application from the Play
Store onto their Android devices.
Internet Connection: An internet connection is required for communication between user
devices and the Firebase Cloud backend. It enables data synchronization, authentication, and
access to cloud services.

DEPARTMENT OF COMPUTER TECHNOLOGY

6.4. MATHEMATICAL MODEL

A mathematical model for the "Resume and Certificate Builder" Android app project can be
formulated to quantify various aspects of its functionality and performance. The model may
include the following components:
User Engagement Model: This component aims to quantify user engagement metrics such as
the number of active users, session durations, and frequency of app usage. It can incorporate
statistical methods to analyze user behavior patterns and identify trends over time.
Performance Metrics Model: The performance of the app can be evaluated using metrics such
as response time, latency, and throughput. Statistical analysis techniques can be applied to
measure these metrics under different conditions and identify potential bottlenecks or areas
for optimization.
Reliability Model: This component assesses the reliability and availability of the app by
imple factors such as uptime, downtime, and error rates. Statistical methods such as reliability
block diagrams or fault tree analysis can be used to estimate the overall system reliability and
identify critical components.
Scalability Model: As the user base grows, the app's scalability becomes crucial. This model
evaluates the app's ability to handle increasing loads and concurrent users. Techniques such
as queuing theory or performance testing can be employed to analyze scalability under
different scenarios.
Overall, the mathematical model provides a quantitative framework for assessing the
performance, reliability, scalability, and economic viability of the "Resume and Certificate
Builder" Android app project. It enables stakeholders to make informed decisions and
optimize the app's design and implementation for maximum effectiveness.

The mathematical model devised for the "Resume and Certificate Builder" Android app
project offers a comprehensive framework for quantifying key aspects of its functionality,
performance, reliability, and scalability. By incorporating components such as the User
Engagement Model, Performance Metrics Model, Reliability Model, and Scalability Model,
stakeholders gain valuable insights into user behavior patterns, app performance under
various conditions, system reliability, and the app's ability to handle increasing loads.
Utilizing statistical methods and performance testing techniques, the model enables
stakeholders to make informed decisions, identify areas for optimization, and prioritize
efforts to enhance the app's effectiveness and user satisfaction. Ultimately, the mathematical
model serves as a powerful tool for guiding the design, development, and optimization of the
app to meet the evolving needs and expectations of its users while ensuring its long-term
success in the competitive landscape of mobile applications.

Department Of Computer Technology

 CHAPTER 7
IMPLEMENTATION AND TESTING
7.1 PROCESS

Requirement Gathering:
During the requirement gathering phase for the "Resume and Certificate Builder" Android
app project, the project team will engage with stakeholders, including potential users, HR
professionals, and career counselors, to understand their needs and expectations. This
involves conducting interviews, surveys, and usability testing sessions to gather insights into
desired features, functionalities, and user experience preferences. By collaborating closely
with stakeholders, the project team aims to ensure that the app meets the needs of its target
audience and effectively addresses the challenges faced in resume and certificate building.
Additionally, requirements will be documented systematically to guide decision-making and
prioritization throughout the project lifecycle.

System Analysis:
Following requirement gathering, the project team will conduct a comprehensive analysis of
existing resume-building processes and tools to identify pain points and areas for
improvement. This involves assessing the effectiveness and efficiency of current methods and
identifying opportunities for innovation. By understanding the strengths and weaknesses of
existing solutions, the team can design a more effective and user-friendly app. Moreover, the
analysis will help in identifying integration points with existing tools or platforms, ensuring a
seamless user experience.

Design:
Based on the requirements and findings from the system analysis phase, the project team will
proceed to design the app. This phase encompasses creating the user interface (UI), database
schema, system architecture, and technical specifications. The design process prioritizes
factors such as simplicity, intuitiveness, and accessibility. User experience (UX) design
principles will be applied to ensure easy navigation and interaction, enhancing the overall
usability of the app. Moreover, the design will be optimized for mobile devices to ensure a
seamless experience across different screen sizes and resolutions.

Implementation:
Once the design is finalized, the development phase will commence, where the app will be
built using Android Studio and integrated with Firebase for backend services. The
implementation process includes translating design specifications into functional code,
incorporating features such as resume templates, form fields, and certificate customization
options. The development team will follow coding best practices and standards to ensure the
app's reliability, security, and performance.

DEPARTMENT OF COMPUTER TECHNOLOGY

Testing:
Upon completion of development, the app will undergo rigorous testing to validate its
functionality, usability, and performance. This testing phase encompasses various levels,
including unit testing, integration testing, and user acceptance testing (UAT). Through
comprehensive testing, the project team aims to identify and address any issues or bugs
before deployment, ensuring a smooth and error-free user experience. Additionally, feedback
from stakeholders and end-users will be solicited during UAT to validate that the app meets
their expectations and requirements.

Deployment:
Once testing is successfully completed, the app will be deployed to the Google Play Store,
making it accessible to users. Deployment involves configuring the app for distribution,
ensuring compatibility with different Android devices and versions, and publishing it on the
app store. The deployment process will be carefully planned and executed to ensure a
seamless user experience for app users.

Maintenance:
Following deployment, the app will require ongoing maintenance and support to ensure its
continued functionality and relevance. This maintenance includes tasks such as bug fixing,
updates to accommodate new Android versions or devices, and providing user support to
address queries or issues. By proactively maintaining the app, the project team can ensure its
longevity, security, and performance, thereby maximizing its value for users.

The "Resume and Certificate Builder" Android app project embarks on a meticulous journey
through the software development lifecycle, commencing with an exhaustive requirement
gathering phase. Through interviews, surveys, and usability testing, the project team
diligently engages with stakeholders, including potential users, HR professionals, and career
counselors, to discern their needs and expectations. This collaborative effort ensures a deep
understanding of desired features, functionalities, and user experience preferences, all
meticulously documented to guide decision-making and prioritization throughout the project.
Subsequently, a comprehensive system analysis unveils insights into existing resume-
building processes and tools, identifying pain points and areas for innovation. Armed with
this knowledge, the team meticulously designs the app, prioritizing simplicity, intuitiveness,
and accessibility, while integrating responsive design principles to ensure optimal
performance across diverse Android devices. The implementation phase sees the translation
of design specifications into functional code, leveraging best practices and standards to
ensure reliability, security, and performance. Rigorous testing validates the app's
functionality, usability, and performance, culminating in a seamless deployment to the
Google Play Store. Post-deployment, ongoing maintenance and support ensure the app's
longevity, security, and relevance, maximizing its value for users.

Department Of Computer Technology

Throughout the requirement gathering phase for the "Resume and Certificate Builder"
Android app project, the project team conducts an array of activities beyond traditional
stakeholder engagement. They delve deep into user personas and scenarios, crafting detailed
profiles and hypothetical situations to better understand the diverse needs and behaviours of
potential users. Additionally, the team employs advanced techniques such as contextual
inquiry, where they observe users in their natural environments to gain deeper insights into
their workflows, pain points, and preferences.
These immersive research methods enable the team to uncover nuanced requirements and
user expectations that may not be readily apparent through standard interviews or surveys
alone.

In the system analysis phase, the project team goes beyond evaluating existing resume-
building processes and tools. They conduct comprehensive market research to identify
emerging trends, industry benchmarks, and competitor offerings. By analysing market
dynamics and user feedback on existing solutions, the team gains valuable insights into
evolving user needs and preferences. This holistic approach ensures that the app is not only
competitive in the current landscape but also future-proofed against emerging trends and
technologies. Moreover, the team explores opportunities for strategic partnerships and
integrations with complementary services to enhance the app's value proposition and expand
its market reach.

During the design phase, the project team employs cutting-edge design methodologies such
as Design Thinking and Human-Centered Design. They conduct co-creation workshops and
participatory design sessions with stakeholders and end-users to foster collaboration and
empathy-driven innovation. Through iterative prototyping and user testing, the team
iteratively refines the app's design, ensuring that it aligns closely with user needs and
preferences. Furthermore, the team leverages data-driven design techniques, analyzing user
interactions and behavior patterns to inform design decisions and optimize the user
experience continuously.

In the implementation phase, the project team embraces a culture of continuous integration
and deployment, leveraging DevOps practices to streamline development workflows and
accelerate time-to-market. They establish automated testing pipelines and deployment
pipelines, enabling rapid iteration and frequent releases while maintaining high levels of
quality and reliability. Furthermore, the team adopts modular design principles and
microservices architecture, enabling flexibility and scalability as the app evolves and grows
in complexity. By prioritizing code maintainability, extensibility, and scalability, the team
ensures that the app remains agile and adaptable to changing requirements and market
conditions.

DEPARTMENT OF COMPUTER TECHNOLOGY

7.2. CODE

package com.resume.pro;

import androidx.appcompat.app.AlertDialog;
import androidx.appcompat.app.AppCompatActivity;
import androidx.appcompat.widget.Toolbar;
import androidx.cardview.widget.CardView;

import android.content.DialogInterface;
import android.content.Intent;
import android.net.Uri;
import android.os.Bundle;
import android.view.Menu;
import android.view.MenuInflater;
import android.view.MenuItem;
import android.view.View;
import android.widget.Toast;

import com.example.demo.R;
import com.google.firebase.auth.FirebaseAuth;

public class DashboardActivity extends AppCompatActivity {

private Toolbar toolbar;

private CardView onlineresumeCardView, offlineresumeCardView,
aboutresumeCardView, myAccountCardView, LogoutCardView, certificateCardView;
private FirebaseAuth mAuth;

@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_dashboard);

Toolbar toolbar = findViewById(R.id.toolbar);

setSupportActionBar(toolbar);
getSupportActionBar().setDisplayHomeAsUpEnabled(false);

onlineresumeCardView = findViewById(R.id.OnlineResumeBtn);
offlineresumeCardView = findViewById(R.id.OfflineResumeCardView);
aboutresumeCardView = findViewById(R.id.AboutCardView);
myAccountCardView = findViewById(R.id.MyAccountCardView);
LogoutCardView = findViewById(R.id.LogoutCardView);
certificateCardView = findViewById(R.id.CertificateCardView);

onlineresumeCardView.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View view) {
Department Of Computer Technology
// Intent intent = new Intent(MainActivity.this, OnlineResumeActivity.class);
// startActivity(intent);
String str = "https://www.canva.com/tools/resume-maker-v1";
Uri uri = Uri.parse(str);
startActivity(new Intent(Intent.ACTION_VIEW,uri));
}
});

offlineresumeCardView.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View view) {
Intent intent = new Intent(DashboardActivity.this, HomeActivity.class);
startActivity(intent);
}
});

aboutresumeCardView.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View view) {
Intent intent = new Intent(DashboardActivity.this, AboutResumeVideos.class);
startActivity(intent);
}
});

myAccountCardView.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View view) {
Intent intent = new Intent(DashboardActivity.this, MyAccount.class);
startActivity(intent);
}
});

certificateCardView.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View view) {
// String str = "https://creaze.co/certificate-creator";
// Uri uri = Uri.parse(str);
// startActivity(new Intent(Intent.ACTION_VIEW,uri));
Intent intent = new Intent(DashboardActivity.this, AboutDeveloper.class);
startActivity(intent);
}
});
LogoutCardView.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View view) {
FirebaseAuth.getInstance().signOut();
Intent intent = new Intent(DashboardActivity.this,LoginActivity.class);
intent.addFlags(Intent.FLAG_ACTIVITY_CLEAR_TOP);
intent.addFlags(Intent.FLAG_ACTIVITY_CLEAR_TASK);

DEPARTMENT OF COMPUTER TECHNOLOGY

Toast.makeText(DashboardActivity.this, "User Successfully LogOut..",
Toast.LENGTH_SHORT).show();
startActivity(intent);
}
});

@Override
public boolean onCreateOptionsMenu(Menu menu)
{ MenuInflater inflater = getMenuInflater();
inflater.inflate(R.menu.main_menu,menu);
return true;
}

@Override
public boolean onOptionsItemSelected(MenuItem item) {

switch (item.getItemId())
{ case R.id.termscondition
:
startActivity(new Intent(getApplicationContext(),TermsCondition.class));
return true;

case R.id.AboutApp :
startActivity(new Intent(getApplicationContext(),AboutApp.class));
return true;

case R.id.rateApp :
startActivity(new Intent(getApplicationContext(),RatingApps.class));
return true;

case R.id.shareApp :

Intent sharingIntent = new Intent(Intent.ACTION_SEND);

sharingIntent.setType("text/plan");
String shareBody="Click this Link and Download Resume Maker App ";
String shareSubject = " Download Resume Maker App ";

sharingIntent.putExtra(Intent.EXTRA_TEXT,shareBody);
sharingIntent.putExtra(Intent.EXTRA_SUBJECT,shareSubject);

startActivity(Intent.createChooser(sharingIntent,"Share Via"));
return true;

case R.id.aboutDeveloper :
startActivity(new Intent(getApplicationContext(),AboutDeveloper.class));
return true;
Department Of Computer Technology
default: return super.onOptionsItemSelected(item);
}

@Override
public void onBackPressed() {

AlertDialog.Builder builder = new AlertDialog.Builder(this);

builder.setMessage("Are you Sure you want to Exit ")
.setCancelable(false)
.setPositiveButton("Yes", new DialogInterface.OnClickListener() {
@Override
public void onClick(DialogInterface dialogInterface, int i) {

DashboardActivity.super.onBackPressed();
}
})
.setNegativeButton("No", new DialogInterface.OnClickListener() {
@Override
public void onClick(DialogInterface dialogInterface, int i) {
dialogInterface.cancel();
}
});
AlertDialog alertDialog=builder.create();
alertDialog.show();

DEPARTMENT OF COMPUTER TECHNOLOGY

 7.3. SNAPSHOTS

Department Of Computer Technology

DEPARTMENT OF COMPUTER TECHNOLOGY
Department Of Computer Technology
DEPARTMENT OF COMPUTER TECHNOLOGY
Department Of Computer Technology
7.4. TESTING

 Testing Objective:
The objective of this testing was to ensure that the automated teacher evaluation system is
functioning as expected and meets the system requirements.

 Testing Methodology:
The testing was conducted in three phases: unit testing, integration testing, and system
testing. Unit testing was performed to test the individual components of the system.
Integration testing was performed to test the interaction between different components of the
system. System testing was performed to test the overall functionality of the system.

 Testing Environment:
The testing was conducted in a controlled environment that simulated the production
environment. The hardware and software used in the testing environment were similar to the
hardware and software used in the production environment.

 Test Cases:
A set of test cases were developed based on the system requirements and use cases. The test
cases covered all the major functionalities of the system, including adding/deleting faculty
and students, adding/deleting questions, rating faculty and co-teachers, and viewing results
and feedback.

 Testing Results:
All test cases were executed successfully, and the system met all the system requirements.
The system was able to handle a large number of users and data without any performance
issues. The user interface was user-friendly and easy to navigate.
The system was able to generate accurate results and feedback based on the ratings and
feedback provided by students, co-teachers, and administrators.

 Bugs and Issues:

A few minor bugs and issues were identified during testing, such as typos in the user
interface and minor errors in the calculations.
These issues were addressed and fixed before the system was deployed in the production
environment

DEPARTMENT OF COMPUTER TECHNOLOGY

7.4.1 TESTING OBJECTIVES:
 Testing is a process of executing a program with the intent of finding an error
 A good test case is one that has a probability of finding an as yet undiscovered error.
 A successful test is one that uncovers an undiscovered error

 Validation of Requirements:
Testing aims to validate that the software meets the specified requirements outlined in the
project documentation. By executing test cases designed to cover each requirement, testers
ensure that the software behaves as expected and fulfills its intended purpose.

 Verification of Functionality:
Testing verifies that all functionalities of the software perform as intended. This includes
testing individual features, user interactions, and system behaviors to ensure they meet the
user's needs and expectations.

 Identification of Defects:
Testing aims to identify defects or bugs present in the software. Testers systematically
execute test cases to uncover errors, inconsistencies, or unexpected behaviors, allowing
developers to address them before release.

 Assessment of Quality:
Testing evaluates the overall quality of the software, including factors such as reliability,
usability, performance, and security. By assessing these quality attributes, testers ensure that
the software meets the desired standards and provides a satisfactory user experience.

 Risk Mitigation:
Testing helps mitigate risks associated with software development by uncovering potential
issues early in the process. By identifying and addressing defects promptly, testers reduce the
likelihood of costly errors and failures during production.

 User Satisfaction:
Ultimately, testing aims to ensure user satisfaction by delivering a high-quality, reliable, and
user-friendly software product. By identifying and resolving issues before release, testers
contribute to the overall success and acceptance of the software among its intended users.

 Continuous Improvement:
Testing also serves as a means for continuous improvement throughout the software
development lifecycle. By collecting feedback, analyzing test results, and refining testing
processes, organizations can optimize their testing efforts and deliver better-quality software
in subsequent releases.

Department Of Computer Technology

7.4.2 TESTING PRINCIPLES:
 All tests should be traceable to end user requirements
 Tests should be planned long before testing begins
 Testing should begin on a small scale and progress towards testing in large
 Exhaustive testing is not possible
 To be most effective testing should be conducted by an independent third party
The primary objective for test case design is to derive a set of tests that has the highest
livelihood for uncovering defects in software. To accomplish this objective two different
categories of test case design techniques are used. They are
 White Box Testing
 Black Box Testing

 White Box Testing: -

White box testing focus on the program control structure. Test cases are derived to ensure
that all statements in the program have been executed at least once during testing and that all
logical conditions have been executed. White box testing, also known as structural or glass
box testing, is a software testing technique that focuses on the internal logic and structure of
the software being tested. Unlike black box testing, which only examines the external
behavior of the software, white box testing involves inspecting the code and testing the
program's control flow, branches, loops, and internal data structures.

The primary objective of white box testing is to ensure that the software functions correctly at
the code level, by verifying that all statements, branches, and conditions within the code are
executed and behave as expected. This helps identify errors or flaws in the code logic, such
as missing or unreachable code, incorrect conditional statements, or logic errors.

 White box testing techniques include:

Statement Coverage: This technique aims to ensure that every statement in the code is
executed at least once during testing. Test cases are designed to traverse through each line of
code, verifying its functionality. Branch Coverage: Branch coverage focuses on testing all
possible outcomes of decision points (such as if-else statements or switch cases) within the
code. Test cases are designed to exercise both true and false branches of conditional
statements, ensuring comprehensive testing of decision logic. Path Coverage: Path coverage
aims to test every possible path through the code, including all possible combinations of
branches and loops. Test cases are designed to traverse through each unique path, ensuring
that all code paths are exercised.

DEPARTMENT OF COMPUTER TECHNOLOGY

 Condition Coverage: This technique focuses on testing all logical conditions within the
code,
ensuring that each condition evaluates to both true and false during testing. Test cases are
designed to cover all possible combinations of conditions within conditional statements.
 Loop Coverage: Loop coverage aims to test the behavior of loops within the code,
including the
execution of loop iterations and termination conditions. Test cases are designed to exercise
different loop scenarios, such as zero iterations, single iterations, and multiple iterations.

 Black Box Testing: -

Black box testing is designed to validate functional requirements without regard to the
internal workings of a program. Black box testing mainly focuses on the information domain
of the software, deriving test cases by partitioning input and output in a manner that provides
through test coverage. Incorrect and missing functions, interface errors, errors in data
structures, error in functional logic are the errors falling in this category. Black box testing,
also known as behavioural, functional, or specification-based testing, is a software testing
technique that focuses on validating the functionality of a software application without
examining its internal code structure. In black box testing, testers are only concerned with the
inputs to the software, the expected outputs, and how the software behaves in response to
those inputs.

The key characteristics of black box testing include:

 Focus on Functional Requirements:

Black box testing is designed to verify that the software meets its functional requirements as
specified in the requirements documentation. Test cases are derived based on the expected
behaviour of the software, without considering how the software is implemented internally.

 Independence from Internal Implementation:

Testers do not have access to the internal code or design of the software being tested. Instead,
they interact with the software through its user interface or external interfaces, treating the
software as a "black box" whose internal workings are not visible.

 Test Case Derivation from Specifications:

Test cases in black box testing are derived based on the software's specifications,
requirements, and functional design. Testers analyze the software's inputs, outputs, and
behaviour to identify test scenarios that cover a range of possible inputs and usage scenarios.

Department Of Computer Technology

 Partitioning Input and Output:
Test cases are designed to partition the input space of the software into equivalence classes or
boundary values, ensuring thorough test coverage. Similarly, output values are categorized to
verify that the software produces the expected outputs under different conditions.

Error Detection:
Black box testing aims to detect errors or defects in the software's functionality, including
incorrect or missing functions, interface errors, errors in data structures, and errors in
functional logic. Testers systematically execute test cases to identify deviations from
expected behavior and report any discrepancies as defects.

Test Case Prioritization:

Test cases may be prioritized based on risk, complexity, or other factors to ensure efficient
testing. High-priority test cases cover critical functionalities or scenarios that are most likely
to result in defects if they fail.

Black box testing:

This techniques include equivalence partitioning, boundary value analysis, decision table
testing, state transition testing, and use case testing, among others. These techniques help
ensure thorough test coverage while focusing on validating the software's functionality from
an external perspective.
Testing Strategies:
A strategy for software testing must accommodate low-level tests that are necessary to
verify that all small source code segment has been correctly implemented as well as high-
level tests that validate major system functions against customer requirements.
In addition to accommodating low-level tests for verifying small source code segments, a
comprehensive testing strategy should include high-level tests that validate major system
functions against customer requirements. This entails defining a hierarchy of testing levels,
including unit testing, integration testing, system testing, and acceptance testing.

Unit Testing: At the lowest level, unit tests are performed to verify individual components or
modules of the software in isolation. This ensures that each unit functions correctly according
to its design and specifications.

Integration Testing: Integration tests focus on verifying the interaction and interoperability
between different units or modules of the software. This ensures that components work
together seamlessly when integrated into larger subsystems or the overall system.

System Testing: System tests validate the entire software system as a whole, verifying that all
components and subsystems function together as expected and meet the specified
requirements. This involves testing various scenarios and use cases to assess the system's
behavior under different conditions.

DEPARTMENT OF COMPUTER TECHNOLOGY

Acceptance Testing: Acceptance tests are performed to validate that the software meets the
requirements and expectations of end-users or stakeholders. This often involves executing
predefined test cases or scenarios that simulate real-world usage to ensure that the software
fulfills its intended purpose.

In addition to these testing levels, various testing techniques and methodologies can be
employed, such as black box testing, white box testing, regression testing, and exploratory
testing. The choice of testing techniques depends on factors such as the nature of the
software, project requirements, and available resources.

Furthermore, the testing strategy should incorporate automation wherever possible to

improve efficiency and effectiveness. Automated testing tools and frameworks can be used to
streamline the testing process, reduce manual effort, and facilitate continuous integration and
delivery practices.

Department Of Computer Technology

7.4.1 Test Cases
Table 3: List of Test Cases

Test Case ID Test Case Description Status

TC001 Verify that the user can register with valid credentials. Pass
TC002 Verify that the user cannot register with invalid or incomplete Pass
credentials.
TC003 Verify that the user can log in with valid credentials. Pass
TC004 Verify that the user cannot log in with invalid credentials. Pass
TC005 Verify that the user can create a resume online. Pass
TC006 Verify that the user can create a resume offline. Pass
TC007 Verify that the user can select a resume template. Pass
TC008 Verify that the user can edit the resume content. Pass
TC009 Verify that the user can save the resume as a PDF. Fail
TC010 Verify that the user can preview the resume before saving. Pass
TC011 Verify that the user can delete a resume. Pass
TC012 Verify that the user can create a certificate. Pass
TC013 Verify that the user can select a certificate template. Pass
TC014 Verify that the user can edit the certificate content. Fail
TC015 Verify that the user can save the certificate as a PDF. Pass
TC016 Verify that the user can preview the certificate before saving. Pass
TC017 Verify that the user can delete a certificate. Pass
TC018 Verify that the user can access resume-building guides. Fail
TC019 Verify that the user can access video tutorials for resume building. Pass
TC020 Verify that the user can contact support for assistance. Fail
TC021 Verify that the user receives notifications for completed actions. Pass
TC022 Verify that the system securely stores user data. Pass
TC023 Verify that the system performs efficiently under load. Pass
TC024 Verify that the system is compatible with different devices and Pass
browsers.
TC025 Verify that the system provides an intuitive user interface. Pass

DEPARTMENT OF COMPUTER TECHNOLOGY

7.4.2 Defect Report
Table 4: First Defect Report

Project Name Resume and Certificate Builder Android App

Defect Title Unable to select certificate template
Defect ID RCBA-001
Module Certificate Builder Module
Severity Medium
Priority Medium
Reported By Tester -
Reported On 03-13-2024
Assigned To Developer -
Description When attempting to select a certificate template from the
available options, the selection process fails, and the desired
template cannot be chosen. This issue prevents users from
customizing
their certificates according to their preferences.
Steps to Reproduce Launch the Resume and Certificate Builder Android App.
Navigate to the Certificate Builder section.
Attempt to select a certificate template from the available options.
Observe that the selection process fails, and the desired template
cannot be chosen.
Expected Result Users should be able to select a certificate template from the
available options, enabling them to customize their certificates as
desired.
Actual Result The selection process fails, and users are unable to choose a
certificate template, rendering the customization feature unusable.

Department Of Computer Technology

 Table 5: Second Defect Report

Project Name Resume and Certificate Builder Android App

Defect Title Error when saving resume as PDF
Defect ID RCBA-002
Module Online Resume Builder Module
Severity High
Priority High
Reported By Tester -
Reported On 03-13-2024
Assigned To Developer -
Description When attempting to save a resume as a PDF file using the online
resume builder module, an error occurs, and the PDF file is not
generated successfully. This issue prevents users from saving their
resumes in the desired format, limiting their ability to share or print
their documents.
Steps to Reproduce Launch the Resume and Certificate Builder Android App.
Navigate to the Online Resume Builder section.
Fill in the required information to create a resume.
Click the "Save as PDF" button to generate the PDF file.
Expected Result Users should be able to save their resumes as PDF files
successfully, enabling them to share or print their documents as
needed.
Actual Result An error occurs during the PDF generation process, and users are
unable to save their resumes in the desired format.

DEPARTMENT OF COMPUTER TECHNOLOGY

 Table 6: Third Defect Report

Project Name Resume and Certificate Builder Android App

Defect Title Certificate template not loading
Defect ID RCBA-003
Module Certificate Builder Module
Severity Medium
Priority High
Reported By Tester - Mishra Mitali
Reported On 03-13-2024
Assigned To Developer - Lanke Gauri
Description When attempting to select a certificate template from the available
options in the Certificate Builder Module, the template fails to load,
and users are unable to proceed with the certificate creation process.
This issue hinders users from accessing and utilizing the variety of
certificate templates provided by the application, impacting their
ability to customize and generate certificates as needed.
Steps to Reproduce Navigate to the Certificate Builder Module within the application.
Click on the option to select a certificate template.
Observe that the template selection screen appears, but the available
templates fail to load.
Attempt to refresh the page or repeat the action multiple times, but
the templates still do not load.
Expected Result Upon accessing the Certificate Builder Module and selecting the
option to choose a certificate template, users should be presented
with a selection of available templates to choose from, allowing
them to proceed with the certificate creation process smoothly.

Actual Result The certificate template selection screen does not load any available
templates, preventing users from selecting a template and proceeding
with certificate creation.

Department Of Computer Technology

7.4.3 Releases
Table 7: History of Releases

Version Type Release Date

Number

1.0 Alpha Testing 02 Nov 2023

1.1 Pre-Beta Testing 05 Dec 2023

1.2 First Beta Testing 09 Jan 2024

2.0 Second Beta Testing 10 Feb 2024

2.1 First Release 06 Mar 2024

DEPARTMENT OF COMPUTER TECHNOLOGY

 RESULTS AND DISCUSSION

8.1 RESULTS

 Development Outcome:
The development phase resulted in the successful creation of a functional and user-friendly
Android application that enables users to build resumes and certificates conveniently. The
app's features, including template selection, data input, and document generation, were
implemented according to specifications and requirements.

 Testing Results:
Comprehensive testing was conducted to evaluate the app's functionality, usability, and
performance. Test results indicated that the app performs well under various conditions and
scenarios, with minimal bugs or issues affecting user experience.

 User Feedback:
Feedback from users who tested the app highlighted positive responses regarding its ease of
use, intuitive interface, and usefulness in creating professional documents. Suggestions for
improvements were also provided, such as additional template options and enhanced
customization features.

 Enhanced Template Options:

Building upon user feedback, the development team introduced a wider range of resume and
certificate templates to cater to diverse user preferences and industry requirements. This
expansion of template options provided users with greater flexibility and customization
capabilities, allowing them to create documents tailored to their specific needs and career
aspirations.

 Advanced Customization Features:

In response to user suggestions, the app's customization features were enhanced to offer
more control over the design and layout of resumes and certificates. Users gained the ability
to adjust font styles, colors, and formatting options, empowering them to create professional-
looking documents that reflect their unique personal brand and professional identity.

 Integration with Cloud Services:

Recognizing the importance of seamless access to documents across devices, the app was
integrated with popular cloud storage services such as Google Drive and Dropbox. This
integration enabled users to securely store and access their resume and certificate files from
anywhere, ensuring continuity and accessibility in their job search and career management
endeavors.

Department Of Computer Technology

 Collaborative Editing and Sharing:
To support collaborative workflows and team collaboration, the app introduced features
for real-time editing and sharing of documents. Users could invite collaborators to review
and provide feedback on their resumes and certificates, facilitating a collaborative and
iterative approach to document creation and refinement.

 Accessibility Improvements:
Building upon principles of inclusivity and accessibility, the app underwent further
enhancements to improve usability for users with disabilities. Accessibility features such as
screen reader compatibility, keyboard navigation, and alternative text support were
implemented to ensure that the app could be used effectively by all users, regardless of their
abilities or assistive technologies.

 Performance Optimization:
Continuous efforts were made to optimize the app's performance and responsiveness,
ensuring smooth and efficient operation across a wide range of Android devices and network
conditions. Performance profiling and optimization techniques were employed to identify and
address bottlenecks, resulting in faster loading times, smoother transitions, and improved
overall responsiveness.

8.2. EXPERIMENTAL SETUP

The experimental setup for evaluating the "Resume and Certificate Builder" Android app
involves configuring the testing environment, defining test scenarios, and selecting
appropriate tools and methodologies for conducting tests. This section outlines the
components and procedures involved in setting up experiments to assess the app's
functionality, performance, and usability.

 Testing Environment:
Hardware: Android devices with varying specifications, including smartphones and tablets, to
test the app's compatibility and performance across different devices.
Software: Android operating system versions representing a range of devices and screen
sizes, ensuring compatibility and responsiveness.
Development Tools: Android Studio for debugging and analysing app behaviour during
testing sessions.
Network Environment: Testing under different network conditions, including Wi-Fi and
mobile data, to assess app performance in real-world usage scenarios.

 Test Scenarios:
Functionality Testing: Verify that all app features, such as user registration, resume building,
certificate creation, and template selection, perform as expected without errors or glitches.
Usability Testing: Evaluate the app's user interface design, navigation flow, and overall user

DEPARTMENT OF COMPUTER TECHNOLOGY

experience to ensure ease of use and intuitive interaction.
Performance Testing: Measure app responsiveness, loading times, and resource utilization
under various conditions to identify potential bottlenecks and optimize performance.
Compatibility Testing: Test the app across different Android OS versions, screen resolutions,
and device models to ensure broad compatibility and consistent functionality.

 Test Tools and Methodologies:

Manual Testing: Experienced testers perform exploratory testing, following predefined test
cases and scenarios to uncover defects and usability issues. Automated Testing: Utilize
Android testing frameworks such as Espresso or Appium for automated functional and
regression testing to streamline test execution and ensure consistency. Network Emulation:
Use tools like Android Emulator or Genymotion to simulate diverse network conditions (e.g.,
latency, packet loss) for performance testing under realistic scenarios. Analytics and
Monitoring: Implement analytics SDKs (e.g., Google Analytics) to track user interactions,
identify usage patterns, and gather feedback for iterative improvements.

 Experiment Execution:
Conduct testing in controlled environments to ensure accurate results and minimize external
factors influencing app behaviour.
Execute test cases systematically, recording observations, defects, and performance metrics
for analysis.
Gather feedback from test users through surveys, interviews, or feedback forms to capture
subjective insights and user preferences.

 Data Collection and Analysis:

Collect quantitative data on app performance metrics (e.g., response time, memory usage)
and qualitative feedback on usability and user satisfaction.
Analyse test results to identify trends, patterns, and areas for improvement, prioritizing issues
based on severity and impact.
Generate comprehensive reports summarizing experiment findings, including
recommendations for enhancements and optimizations.

Department Of Computer Technology

8.3. PERFORMANCE METRICS

DEPARTMENT OF COMPUTER TECHNOLOGY

8.4. DISCUSSION

Usability Considerations: The app's intuitive design and navigation are acknowledged as
strengths, contributing to its accessibility across various user demographics. However, the
discussion highlights the potential for further improvements in usability to enhance user
satisfaction and engagement. Exploring user feedback and conducting usability testing can
provide valuable insights into areas for refinement, ensuring a seamless user experience.

 Performance Optimization:
While the app performs adequately under normal usage conditions, there is recognition of
the opportunity to optimize performance for faster load times and smoother operation. This
may involve optimizing code efficiency, reducing resource usage, and implementing caching
mechanisms to streamline data retrieval and processing. By prioritizing performance
optimization efforts, the app can deliver a more responsive and efficient user experience.

 Network Performance Optimization: Optimizing network calls and data transfer

protocols, such as implementing data compression techniques or leveraging Content Delivery
Networks (CDNs), can reduce latency and improve app responsiveness, particularly for users
with slower internet connections.
 Memory Management: Implementing efficient memory management techniques, such as
object pooling or resource recycling, can minimize memory leaks and reduce the app's
memory footprint, improving overall performance and stability. Performance Monitoring:
Continuous monitoring of app performance using tools like Firebase Performance Monitoring
or third-party analytics platforms can help detect performance bottlenecks and prioritize
optimization efforts effectively.

 Feature Enhancements: The discussion identifies several potential feature enhancements

to enrich the app's functionality and provide users with more comprehensive tools for
building professional documents. These enhancements include advanced customization
options, integration with professional networking platforms, and AI-driven resume analysis
capabilities. By continuously adding new features and functionalities, the app can evolve to
meet the evolving needs and expectations of its users.
 Gamification Elements: Introducing gamification elements, such as achievement badges,
progress trackers, or rewards systems, can increase user engagement and motivation,
encouraging users to actively use and explore the app's features.
Social Sharing Integration: Integrating social sharing functionality, allowing users to easily
share their resumes or achievements on social media platforms, can enhance the app's virality
and user acquisition potential.

Department Of Computer Technology

 Personalization Options: Providing users with personalized recommendations, content
suggestions, or customizable user profiles can enhance user satisfaction and loyalty by
tailoring the app experience to individual preferences and interests.

 Scalability and Maintenance: Recognizing the importance of scalability and

maintenance for long-term success, the discussion emphasizes the need for robust backend
infrastructure, scalable development practices, and a systematic maintenance plan. By
proactively addressing scalability challenges and establishing ongoing maintenance
processes, the app can adapt to growth and technological advancements while ensuring
continued reliability and performance.

 Horizontal Scalability: Designing the app's architecture to support horizontal scalability,

such as microservices architecture or serverless computing, can facilitate seamless scaling of
resources to accommodate growing user demand and workload.Automated Monitoring and
Alerting: Implementing automated monitoring and alerting systems for key performance
metrics, system health, and security incidents can proactively identify and address issues,
minimizing downtime and ensuring continuous availability.Compliance and Regulations:
Staying updated on relevant industry regulations and compliance standards, such as GDPR or
HIPAA, and implementing necessary measures to ensure compliance can mitigate legal risks
and maintain user trust.

DEPARTMENT OF COMPUTER TECHNOLOGY

 CONCLUSION
The development of the "Resume and Certificate Builder" Android application signifies a
substantial breakthrough in addressing the challenges individuals encounter when crafting
professional documents. Through a combination of innovative features, robust functionality,
and a user-centric design approach, the app offers a comprehensive solution for users
seeking to seamlessly create, manage, and share their resumes and certificates. Notable
achievements include the streamlining of document creation processes through intuitive
tools and customizable templates, facilitating a focus on showcasing skills and experiences
effectively. Additionally, the app's accessibility on the Android platform empowers users to
work on their documents conveniently from anywhere, enhancing productivity and
flexibility. Personalized guidance, offered through video tutorials and sample documents,
aids users in tailoring their resumes and certificates to their career goals, boosting
confidence and effectiveness. Integration with Firebase backend ensures secure data
synchronization across devices, while positive user feedback underscores satisfaction with
the app's simplicity and versatility. Beyond individual benefits, the app's impact extends to
broader implications for education, employment, and workforce development by bridging
gaps between job seekers and employers, promoting lifelong learning, and skill
development. Looking ahead, recommendations for future enhancements include integrating
advanced features like AI-driven resume analysis and expanding language support to cater
to diverse users' needs. With a commitment to continuous improvement and user
engagement, the "Resume and Certificate Builder" app is poised to make a meaningful
contribution to users' professional growth and success in the digital era.

The "Resume and Certificate Builder" Android application has been a transformative tool,
revolutionizing how individuals craft and manage their professional documents. Its
development represents not just a technological achievement but a significant milestone in
empowering users to navigate the complexities of career advancement with ease and
confidence. One of the standout achievements of the app lies in its ability to streamline the
document creation process. By providing intuitive tools and customizable templates, users
can effortlessly create polished resumes and certificates that effectively highlight their
qualifications and achievements. Moreover, the app's seamless integration with Android
devices ensures that users can access and edit their documents anytime, anywhere, enhancing
productivity and flexibility.

Department Of Computer Technology

 REFERENCES

Andrews, M. (2019). "How to Write a Resume: The Complete Guide." The Muse.
Retrieved from: https://www.themuse.com/advice/how-to-write-a-resume
 Puckett, A. (2021). "How to Create a Certificate in Microsoft Word." Techwalla.
Retrieved from: https://www.techwalla.com/articles/how-to-create-a-certificate-in-
microsoft-word
 Stice, S. (2020). "5 Best Resume Builder Tools to Help You Get Your Resume Fit
for 2021." Business News Daily. Retrieved from:
https://www.businessnewsdaily.com/6561-best-resume-builder.html
 Surman, R. (2018). "The 10 Best Apps to Create a Brilliant CV." CV Template
Master. Retrieved from: https://www.cvtemplatemaster.com/the-10-best-apps-to-
create-a-brilliant-cv/
 Williams, A. (2020). "10 Best Certificate Maker Apps for Android & iOS."
TechWhoop. Retrieved from: https://www.techwhoop.com/certificate-maker-apps/
 Zety. (2022). "Resume Formats: Which One to Choose for Your Job Application?"
Zety. Retrieved from: https://zety.com/blog/resume-formats
 Tyagi, R., Singh, N., Baghel, A., Singh, A. (2020). "Certificate and resume
builderlication." ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor:7.429,
Volume 8 Issue V May 2020.
 Kungwani, B., Manglani, A., Dembal, N., Hirani, H., Sawlani, L. "Analytical
Resume Builder – A web Application for Creating a resume which gives a best
impact in this competitive world." Annals of R.S.C.B.
 Kumar, A., Kumar, A., Mishra, R. (2015). "Language-Check 0.8: Python Package
Index." Pypi.python.org. [Online]. Available: Link. Accessed: April 17, 2015.
 Marapaka, S., Ramteke, S. "Test of a model linking applicant resume information
and hiring recommendations." International Journal of Selection and Assessment, 19,
374-387.
 Rangrej, S., Gupta, S. (2020). "Resume Builder using Natural Language Processing."
International Journal of Engineering Research & Technology, 8(10), 492-496.
 Nguyen, T. H., Le, T. M. (2019). "Automatic Resume Generation Using Natural
Language Processing and Machine Learning." In 2019 11th International Conference
on Knowledge and Systems Engineering (KSE) (pp. 97-102). IEEE.
 Zhang, X., Zhu, C. (2018). "An Automatic Resume Generation System Based on
Natural Language Processing." In 2018 9th IEEE International Conference on
Software Engineering and Service Science (ICSESS) (pp. 77-80) IEEE.
 Catano, V. M., Wiesner, W. H., & Hackett, R. D. (2016). Recruitment and selection
in Canada (6th ed.). Toronto, ON: Nelson Education Ltd.
 Derous, E., & Ryan, A. M. (2012). Documenting the adverse impact of resume
screening: Degree of ethnic identification matters. International Journal of Selection
and Assessment, 20, 464-474. Link


DEPARTMENT OF COMPUTER TECHNOLOGY

 "Language-Check 0.8: Python Package Index." Pypi.python.org. (2016).
[Online]. Available: Link. Accessed: April 17, 2016.
 Chen, C., Huang, Y., & Lee, M. (2011). Test of a model linking applicant resume
information and hiring recommendations. International Journal of Selection and
Assessment, 19, 374-387.

Department Of Computer Technology