E203E 19.3.NF.

11 (7/8)

CNC Video Measuring System NEXIV

NEXIV MapMeasure

Ver. 1.0

Instruction Manual
 Introduction

Introduction

Thank you for purchasing a Nikon product.

This instruction manual is written for users of CNC Video Measuring System NEXIV MapMeasure.

Introduction
To ensure correct usage, read this manual carefully before operating the product.

• No part of this manual may be reproduced or transmitted in any form without prior written permission from Nikon.

• The contents of this manual are subject to change without notice.

• Although every effort has been made to ensure the accuracy of this manual, errors or inconsistencies may remain. If
you note any points that are unclear or incorrect, please contact your nearest Nikon representative.

• Some of the equipment described in this manual may not be included in the set you have purchased.

• If you intend to use any other equipment with this product, read the manual for that equipment too.

• If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may
be impaired.

Windows and Excel are registered trademarks of Microsoft Corporation in the U.S. and other countries.

Other product and company names mentioned in this manual are trademarks or registered trademarks of their
respective owners.

The “TM” and ® marks are not used to identify registered trademarks and trademarks in this manual.

CNC Video Measuring System NEXIV MapMeasure Instruction Manual i

 Contents

Contents

Introduction .............................................. i
Contents

Operating Environment ......................... iii

Application Overview ............................ iii
Input/Output File and Stored Data ........ iv
1 Basic Operations........................... 1-1
1.1 Starting and Terminating
NEXIV MapMeasure ...................................... 1-1
(1) Starting NEXIV MapMeasure ............. 1-1
(2) Terminating NEXIV MapMeasure ....... 1-2
1.2 Main Window ................................................. 1-3

2 Menu Bar ........................................ 2-1

2.1 File Menu ....................................................... 2-1
2.2 Map Menu ..................................................... 2-2
2.2.1 Detailed Settings ................................. 2-2
(1) Array.................................................... 2-2
(2) View .................................................... 2-3
(3) Color.................................................... 2-4
2.3 Measurement Menu ....................................... 2-5
2.3.1 Detail Settings ..................................... 2-6
(1) Alignment ............................................ 2-6
(2) Conversion/Transfer ........................... 2-7
(3) Movement option ................................ 2-8
(4) Result file .......................................... 2-10
(5) Variables ........................................... 2-12
(6) Message ........................................... 2-13
2.4 Result Menu ................................................ 2-14
2.4.1 File Conversion ................................. 2-14
2.5 Setting Menu ............................................... 2-16
2.5.1 User Account Setting ......................... 2-16
(1) User Account Setting ........................ 2-16
(2) Record new ....................................... 2-17
(3) Edit .................................................... 2-18
(4) Delete ................................................ 2-18
2.5.2 Language Setting .............................. 2-19

3 Function List for

Each User Account Privilege ....... 3-1

ii CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 Operating Environment

Operating Environment
Use the NEXIV MapMeasure with recommended equipment specifications and OS in the recommended environment
shown below.

Hardware Specification

Operating Environment
OS Windows 7 (64-bit, Professional or Enterprise)

CPU Intel Xeon / Core 2 Duo or higher

Memory 8 GB or more

Graphics card Graphics card equivalent to NVIDIA Quadro NVS 300

HDD 500 GB

Monitor 22-inch or larger wide monitor (1920 x 1080 recommended)

IEEE1394 card IEEE1394b PCI Express card

Others Keyboard, dual-button scrolling mouse

Software / Language Applicable Version

Microsoft Office Excel Microsoft Office2010 Professional or later

Language English, Japanese

Application Overview
The NEXIV MapMeasure is used to measure work pieces of the same shape, which are arranged on the stage.
This application software can quickly edit settings of the interval and the number of work pieces and specification of
measurement work pieces.

To start measurement by using the NEXIV MapMeasure, the NEXIV AutoMeasure must be running.

CNC Video Measuring System NEXIV MapMeasure Instruction Manual iii

 Input/Output File and Stored Data

Input/Output File and Stored Data

The following shows the NEXIV MapMeasure file configuration.

The created recipe file is stored in the RECIPE folder and the result file is stored in the DATA folder.
Input/Output File and Stored Data

NEXIV-ROOT
: Folder
INIT
: File
MapMeasure.cfg (1)

DATA (2)

Teaching file name

Lot number

Sample number.nmr (3)

K3

Teaching file name.csv (4)

RECIPE (5)

Recipe file name.nrcp (6)

Map file name.nmap (7)

Origin.ini (8)

Data Created by NEXIV MapMeasure

No. Folder / File Type Extension Description

(1) MapMeasure setting file .cfg MapMeasure environment setting file.

(2) DATA Folder This folder contains the result files of recipe-file based replay
measurements and csv files created when file conversion is requested.

(3) Sample number.nmr .nmr A result file of recipe-file based replay measurement.
(Result file) The sample number specified for the replay is used for the file name.

(4) Teaching file name.csv .csv A csv file created when file conversion is requested for teaching-file based
replay measurement.
The teaching file name is used for the name of this file.

(5) RECIPE Folder The folder contains the created recipe files.

(6) Recipe file name.nrcp .nrcp A file in which measurement conditions and work pieces installation
conditions are described.

(7) Map file name.nmap .nmap A file in which work pieces installation conditions (such as intervals and
number of work pieces) are described.

(8) Origin.ini .ini A file in which initial coordinates are registered.

iv CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 1. Basic Operations

1 Basic Operations
This chapter describes the basic usage, menu, and panels (panes) of the NEXIV MapMeasure (application).

1.1 Starting and Terminating NEXIV MapMeasure

1
(1) Starting NEXIV MapMeasure

Basic Operations
1. Start the NEXIV MapMeasure.

Start the NEXIV MapMeasure from the Start menu or by clicking the icon on the desktop.

A login screen is displayed.

2. Log in to the NEXIV MapMeasure.

Enter a user name and password for login.

When the NEXIV MapMeasure is installed, following types of user categories are set by default: Manager
(NEXIV3-MGR) and Operator (NEXIV3-OP).
Enter the user name and password to log in and click the [OK] button.
The login operation will be skipped if the [The software is started automatically by current login user after next
time] checkbox is selected in the [User Account Setting] pane.

Display Items Description Initial Value

Version Version information of the application is displayed.

User name Enter a login user name in this text box.

Enter a password in this text box.

Password
This item can be omitted when password setting is not required.

Click this button to log in to the NEXIV MapMeasure with the entered user
[OK] button name and password.
This button is disabled when no user name has been entered.

[Cancel] button Click this button to close the window and terminate the NEXIV MapMeasure.

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 1-1

 1.1 Starting and Terminating NEXIV MapMeasure

(2) Terminating NEXIV MapMeasure

1. Terminate the NEXIV MapMeasure.

Perform one of the following methods to terminate the NEXIV MapMeasure.

 Click [File] - [Exit application] from the menu bar (recommended).

1  Click the [Close] button ( ) in the upper right corner of the main window.

 Click the icon at the right end of the title bar in the main window to display the system menu. Select [Close] in
Basic Operations

the menu.

 Press the [Alt] + [F4] keys on the keyboard.

1-2 CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 1.2 Main Window

1.2 Main Window

Use this window to load the recipe file, set measurement conditions, start measurement, and check measurement
results.

Basic Operations
Measurement
workpiece and
measurement
result display
area (map)

Item Description Initial Value

Measurement Status This field displays the information on the recipe file, teaching file, etc.

Recipe file This field displays the absolute path for the current recipe file.

[Browse] button Specify the recipe file to load.

Teaching file This field displays the absolute path for the teaching file.

[Browse] button Specify the teaching file.

This button is available only when login to the NEXIV MapMeasure has been
made as an administrator (NEXIV3-MGR).
This button is hidden if login has been made as an operator.

Alignment file This field displays the absolute path for the alignment file.

[Lot number] combo box Enter or select the lot number.

Result file This field displays the settings of result file.

[Output result file] Specify whether to output measurement results to the result file. OFF
checkbox When this checkbox is selected, measurement results are output to the result file.
This button is available only when login to the NEXIV MapMeasure has been
made as an administrator (NEXIV3-MGR).
This checkbox is always selected if login has been made as an operator.

Result file This field displays the absolute path for the result file.
Click the [Detail settings] button to specify the result file output destination.

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 1-3

 1.2 Main Window

Item Description Initial Value

Movement This field displays the safe position setting in Movement.

[Move safe position after Specify whether to set move the stage to the safe position after all OFF
measurement] checkbox measurements are completed.
When this checkbox is selected, the stage moves to the safe position.

1 This button is available only when login to the NEXIV MapMeasure has been
made as an administrator (NEXIV3-MGR).
Click the [Detail settings] button to display the [Measurement > Detail settings >
Basic Operations

Movement] pane. Set the safe position coordinate on this pane.

For details of the safe position coordinate setting, see 2.3.1 “(3) Movement.”

Measurement This field displays whether the workpiece is to be measured and measurement
result.

Measurement workpiece This area is used to specify whether to select measurement workpiece for each
and measurement result area or whether to skip measurement.
display area This display area is called map hereafter in this document.
<Switching measurement workpieces>
 Switch “Selected” and “Skip” by clicking the mouse.
 Reverse all lines by pressing the [Shift] key and clicking the mouse.
 Reverse all columns by pressing the [Ctrl] key and clicking the mouse.
The area that is being measured blinks.
After the target area has been measured, the measurement result is
overwritten.

[Zoom In] button Click this button to decrease one line and one column of the displayed area.

[Zoom Out] button Click this button to increase one line and one column of the displayed area.

[Clear] button Click this button to clear the map to display only the specification of
measurement workpiece (“Selected”) or skipping measurement (“Skip”).

[Error and fail] combo Specify the information to be displayed in the [Error and fail] list box. [Error and fail]
box One of the following is selectable.
 Error and fail
The error item and fail item of measurement result are displayed.
 Error only
Only the error item of measurement result is displayed.
 Fail only
Only the fail item of measurement result is displayed.

[Error and fail] list box This list box displays workpiece whose measurement resulted in an error or
failure.
The content in this list box is retained until the [Run] button is clicked or the
recipe file or teaching file is updated.

[Detail settings] button Click this button to perform measurement detail settings.
For details, see 2.3.1, “Detail settings.”

[Run] button Click this button to start measurement.

After measurement has started, this button changes to [End].
Note) Clicking the [End] button stops measurement by the NEXIV
MapMeasure but does not stop replay of the NEXIV AutoMeasure.
Stop replay on the NEXIV AutoMeasure side.

1-4 CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 2. Menu Bar

2 Menu Bar
The main menu of NEXIV MapMeasure has the structure described below.

Menu Function Description Keyboard Shortcut

File Use this menu to read or save recipe files. –

Map Use this menu to read, edit, and save the map file. –

Measurement Use this menu to start and finish measurement and change settings. –
2
Result Use this menu to output measurement results to the result file. –

Menu Bar
Settings Use this menu to make user account settings and language setting. –

2.1 File Menu

This menu contains functions for reading and writing recipe files.

Menu Item Function Description Keyboard Shortcut

New Use this menu to create a new recipe file. Ctrl+N

Open Use this menu to open an existing recipe file. Ctrl+O

Save file Use this menu to overwrite a recipe file with the currently edited version. Ctrl+S

Save as Use this menu to save the currently edited version of a recipe file under a new –
file name.

Recent NRCP file 1 to 4 Use this menu to display a list of up to four recipe files opened most recently. –

Exit application Use this menu to close NEXIV MapMeasure. –

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 2-1

 2.2 Map Menu

2.2 Map Menu

This menu is used to read and save the map file (describing work pieces installation conditions such as the interval and
number of work pieces) and set the map (measurement workpiece and measurement result display area in the main
window).

Menu Item Function Description Keyboard Shortcut

New Use this menu to create a new map file.

2 Open Use this menu to open an existing map file.

Save file Use this menu to overwrite a map file with the currently edited version.
Save as Use this menu to save the currently edited version of a map file under a new file name. –
Menu Bar

Recent NMAP file 1 to 4 Use this menu to display a list of up to four map files opened most recently. –
View Use this menu to enlarge or reduce the map.
Detailed Settings Use this menu to array pattern, view, and color setting for map in the wizard format.

2.2.1 Detailed Settings

This function sets array pattern, view, and color setting for map in the wizard format.

(1) Array
This function specifies workpieces (measurement area) with the numbers of rows and columns in the array pattern and
distance.
When the number of rows or columns is changed, all areas in the array pattern are set again as a measurement workpiece.

Item Description Initial Value

Array pattern Set the numbers of rows and columns in the array pattern.
The number of arrays Set the number of array pattern.
Row Set the number of cow. 5
Column Set the number of column. 5
Distance Set the interval between workpieces.
Row [mm] Set the row interval (unit: mm). 0.0000
Column [mm] Set the column interval (unit: mm). 0.0000
[Back to previous] button Use this button to restore the state at the time when the [Map > Detailed Settings >
Array] pane was displayed or the [Apply] button was clicked.
[OK] button Use this button to apply the settings and close the pane.
[Cancel] button Use this button to discard the settings and close the pane.
[Apply] button Use this button to apply the settings without closing the pane.

2-2 CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 2.2 Map Menu

(2) View

This function sets workpiece display direction, serial numbers starting number, and the location of part used for teaching.

To set the location where the teaching file was created, set the numbers of rows and columns as the location of part
used for teaching.

Menu Bar
Item Description Initial Value

View Set the workpiece identification display format.

[Row count direction] Use this button to set the direction for displaying the workpiece with row and [Count up
radio button column. from top to
 When the upper button is selected, the number of rows increases in the bottom]
direction from the top to the bottom of the map.
 When the lower button is selected, the number of rows increases in the
direction from the bottom to the top of the map.
Location of part used for Set the location and serial numbers for the part used for teaching.
teaching
Relative Count from Set the location of part used for teaching.
most bottom-left Set the numbers of rows and columns with the bottom left of the map regarded as
row #1, column #1.
An integer of 1 or more is settable as the number of rows and the columns.
Row Set the row. 1
Column Set the column. 1
Absolute location in Set the row number and column number for the location of part used for teaching.
map layout An integer of 1 or more is settable as a Row and a Column number.
Row Set the row number. 1
Column Set the column number. 1
Location by the serial Set the serial numbers for the location of part used for teaching.
number Integers are settable as serial numbers.
Number Set the number. 0
[Back to previous] button Use this button to restore the state at the time when the [Map > Detailed Settings >
View] pane was displayed or the [Apply] button was clicked.
[OK] button Use this button to apply the settings and close the pane.
[Cancel] button Use this button to discard the settings and close the pane.
[Apply] button Use this button to apply the settings without closing the pane.

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 2-3

 2.2 Map Menu

(3) Color

This function sets color for the measurement workpiece and measurement result.

2
Menu Bar

Item Description Initial Value

Measurement workpiece Set the color of selected workpieces and the color of skipped workpieces.

Selected Set the color of workpieces to be measured. Blue

Skip Set the color of workpieces to be skipped. Gray

Measurement result Set the measurement result color.

Pass Set the color of successful measurement result. Green

Fail Set the color of failed measurement result. Yellow

Error Set the color of error measurement result. Red

[Back to previous] button Use this button to restore the state at the time when the [Map > Detailed Settings
> Color] pane was displayed or the [Apply] button was clicked.

[OK] button Use this button to apply the settings and close the pane.

[Cancel] button Use this button to discard the settings and close the pane.

[Apply] button Use this button to apply the settings without closing the pane.

2-4 CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 2.3 Measurement Menu

2.3 Measurement Menu

This menu is used to start measurement, terminate measurement, set measurement settings and set result file settings.

Menu Item Function Description Keyboard Shortcut

Run Use this menu to start measurement.

End Use this menu to terminate measurement.

Detail Settings Use this menu to set the measurement settings and result file settings.
2
When [End] is clicked

Menu Bar
Selecting [Measurement] - [End] from the menu bar or clicking the [End] button on the main window while the
NEXIV MapMeasure is in measurement stops the measurement operation of the NEXIV MapMeasure.
However, the replay operation of the NEXIV AutoMeasure does not stop at the same time.
For this reason, to stop all operations, operate the NEXIV AutoMeasure to suspend or terminate the replay
operation.

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 2-5

 2.3 Measurement Menu

2.3.1 Detail Settings

This function sets alignment and other measurement condition in the wizard format.

(1) Alignment

This function sets the initial coordinate and alignment file.

2
Menu Bar

Item Description Initial Value

[Initial coordinate system] radio Select the initial coordinate to be used for measurements. [Use initial
button One of the following three items is selectable: coordinate in
teaching file]
 Use initial coordinate in teaching file
 Reset initial coordinate in teaching file
 Use the following initial coordinate info

[Use the following initial Specify the registered initial coordinate.

coordinate info] combo box The NEXIV MapMeasure cannot register the initial coordinate.
Use the NEXIV AutoMeasure to register the initial coordinate.

Alignment Set the alignment file.

[Set alignment file path] Specify whether to replay the alignment file before starting measurement. OFF
checkbox When this checkbox is selected, the alignment file is replayed after
measurement is started and then workpiece replay is measurement.

Alignment file path This field displays the absolute path for the alignment file.

[Browse] button Use this button to specify the alignment file to be replayed after
measurement starts.

[Back to previous] button Use this button to restore the state at the time when the [Measurement >
Detail Settings > Alignment] pane was displayed or the [Apply] button was
clicked.

[OK] button Use this button to apply the settings and close the pane.

[Cancel] button Use this button to discard the settings and close the pane.

[Apply] button Use this button to apply the settings without closing the pane.

2-6 CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 2.3 Measurement Menu

(2) Conversion/Transfer

This function sets whether to convert the file, whether to transfer the file, and how to convert and transfer the file after
measurement of each workpiece.

Menu Bar
Item Description Initial Value

Output setting This field sets the file transfer and file conversion.

[Set file conversion] When this checkbox is not selected, the teaching file settings remain OFF
checkbox unchanged.
When this checkbox is selected, specify whether to convert the file by the [Set
file conversion] radio button.

[Set file conversion] Use this button to specify whether to convert the execution result file to a CSV [No
radio button file when outputting it and also to specify the execution result file output conversion]
direction when the file is converted.
One of the following three items is selectable:
 No conversion
 Vertical
 Horizontal

[Set file transfer] When this checkbox is not selected, the teaching file settings remain OFF
checkbox unchanged.
When this checkbox is selected, specify whether to transfer the file by the [Set
file transfer] radio button.

[Set file transfer] Use this button to specify whether to transfer the execution result file to the [No transfer]
radio button external computer when outputting the file.
One of the following two items is selectable:
 No transfer
 Transfer

[Back to previous] button Use this button to restore the state at the time when the [Measurement > Detail
Settings > Conversion/Transfer] pane was displayed or the [Apply] button was
clicked.

[OK] button Use this button to apply the settings and close the pane.

[Cancel] button Use this button to discard the settings and close the pane.

[Apply] button Use this button to apply the settings without closing the pane.

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 2-7

 2.3 Measurement Menu

(3) Movement option

This function sets motion during measurement and motion after measurement.

2
Menu Bar

Item Description Initial Value

Motion during measurement This field sets the direction of measurement and processing in case the
measurement result is abnormal.

[Direction of Set the direction of measurement. [Measure in

measurement] radio One of the following two items is selectable: row direction]
button
 Measure in row direction
 Measure in column direction

[Action for tolerance Set processing to be performed for cases for which “Error” judgment is given. [Pause]
error] radio button One of the following three items is selectable:
 Pause
Pause the replay measurement when an error is returned for the tolerance
judgment.
 Run nest step
Continue the replay measurement when an error is returned for the tolerance
judgment.
 Run nest sample
Stop the measurement for the current workpiece when an error is returned for the
tolerance judgment, and moves on to the next workpiece for replay measurement.

[Action for Set processing in the case of a measurement error. [Pause]

measurement error] One of the following three items is selectable:
radio button
 Pause
Pause the replay measurement when an error is returned for the measurement.
 Run nest step
Continue the replay measurement when an error is returned for the measurement.
 Run nest sample
Stop the measurement for the current workpiece when an error is returned for the
measurement, and moves on to the next workpiece for replay measurement.

2-8 CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 2.3 Measurement Menu

Item Description Initial Value

[Printer output] radio Set whether to output measurement results to the printer after replay [Standard]
button measurement.
One of the following three items is selectable:
 Standard
Items for which tolerance judgment is set or items specified as output items
are output to the printer.
 Failed data only
Only tolerance judgment error items are output to the printer.
2
 No output
No measurement result is output to the printer.

Menu Bar
Motion after measurement

[Move to safe position Specify whether to move the head to the safe position after all measurements OFF
after measurement] are completed.
checkbox When this checkbox is selected, the head moves to the safe position.
This checkbox is available when login to the NEXIV MapMeasure has been
made as an administrator (NEXIV3–MGR).

X Set the X coordinate of the safe position. 100

Y Set the Y coordinate of the safe position. 100

Z Set the Z coordinate of the safe position. 200

[Back to previous] button Use this button to restore the state at the time when the [Measurement > Detail
Settings > Motion Option] pane was displayed or the [Apply] button was clicked.

[OK] button Use this button to apply the settings and close the pane.

[Cancel] button Use this button to discard the settings and close the pane.

[Apply] button Use this button to apply the settings without closing the pane.

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 2-9

 2.3 Measurement Menu

(4) Result file

This function sets the file name and output conditions for measurement result.

2
Menu Bar

Item Description Initial Value

Result file Set the result file (CSV) output destination and the output format.

Folder This field displays the folder path for the result file output destination.

[Browse] button Use this button to specify the folder of the result file output destination.

[File name format] Set the result file name to output.

combo box If no CSV extension is attached to the file name, a CSV extension is
automatically attached.
Using the [Insert keyword] button makes it possible to insert a keyword in < >
into the file name and to convert a part of the file name with the keyword.

[Insert keyword] Use this button to insert a keyword into the end of [File name format].
button  <FILE>
Convert to the teaching file name.
 <LOT>
Convert to the lot number.
 <SAMPLE>
Convert to the sample number.
 <DATE>
Convert to the year/month/day/hour/minute.
Example) Data of 19:33 April 10, 2014 is converted to “201404101933”

In addition to any file name, the following six file name formats are selectable:
 <FILE>.csv
 <FILE>_<LOT>.csv
 <FILE>_<LOT>_<SAMPLE>.csv
 <FILE>_<DATE>.csv
 <FILE>_<LOT>_<DATE>.csv
 <FILE>_<LOT>_<SAMPLE>_<DATE>.csv

Output file name This field displays the output CSV file name.
When a keyword is set in the [File name format] combo box, the keyword is
converted and displayed.

2-10 CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 2.3 Measurement Menu

Item Description Initial Value

[Conversion method] Set the execution result output direction (vertical or horizontal) when converting [Horizontal
radio button execution results to a CSV-format file. direction]
One of the following two items is selectable:
 Horizontal direction
 Vertical direction

[Expression method of Specify whether to output the workpiece with row and column or serial numbers. [Row -
workpiece ] radio
button
One of the following three items is selectable:
 Row - Column
Column]
2
 Use separator (,) between row and column

Menu Bar
 Serial numbers

[Back to previous] button Use this button to restore the state at the time when the [Measurement > Detail
Settings > Result File] pane was displayed or the [Apply] button was clicked.

[OK] button Use this button to apply the settings and close the pane.

[Cancel] button Use this button to discard the settings and close the pane.

[Apply] button Use this button to apply the settings without closing the pane.

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 2-11

 2.3 Measurement Menu

(5) Variables

This menu sets initial values of 26 variables (A to Z).

These variables can be used for [Nominal value], [Upper tolerance], [Lower tolerance], and others in calculation
formulas and output condition settings.

2
Menu Bar

Item Description Initial Value

List of variables

Variable name 26 variable names (A to Z) are provided.

No variable name can be modified.

Default value Set initial values (real numbers) for each variable name.
The initial value of unentered variables is 0.

[Back to previous] button Use this button to restore the state at the time when the [Measurement > Detail
Settings > Variables] pane was displayed or the [Apply] button was clicked.

[OK] button Use this button to apply the settings and close the pane.

[Cancel] button Use this button to discard the settings and close the pane.

[Apply] button Use this button to apply the settings without closing the pane.

2-12 CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 2.3 Measurement Menu

(6) Message

This function sets message output to measurement results.

Menu Bar
Item Description Initial Value

[Message output] checkbox Specify whether to output the input message to the CSV file for the OFF
measurement results.
If this checkbox is selected, the message will be output to the CSV file for the
measurement results.

List of message When the [Message output] checkbox is selected, up to 20 messages can be
entered.

[Back to previous] button Use this button to restore the state at the time when the [Measurement >
Detail Settings > Message] pane was displayed or the [Apply] button was
clicked.

[OK] button Use this button to apply the settings and close the pane.

[Cancel] button Use this button to discard the settings and close the pane.

[Apply] button Use this button to apply the settings without closing the pane.

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 2-13

 2.4 Result Menu

2.4 Result Menu

This menu item is used to convert measurement results to a CSV-format file.

Menu Item Function Description Keyboard Shortcut

File Conversion Use this menu to convert measurement results to a CSV file. -

2 2.4.1 File Conversion

Only items for which output conditions have been set in the teaching file set by the recipe file are converted to a CSV file.
Menu Bar

Item Description Initial Value

Lot number Set the lot number to be converted.

Lot number list This field displays a list of lot numbers related to the teaching file that is being
loaded.
Clicking a lot number in the list sets it as a lot number to be converted.

Sample number (From) Set the starting number of the sample number to be converted.
The valid range of this parameter is 1 to 10000.

Sample number (From) list This field displays a list of sample numbers related to lot numbers.
Clicking a sample number in the list sets it as a sample number to be converted.

Sample number (To) Set the end number of the sample number to be converted.

Sample number (To) list This field displays a list of sample numbers related to lot numbers.
Clicking a sample number in the list sets it as a sample number to be converted.

CSV file Specify method and destination of file conversion.

Conversion method Set the execution result output direction (vertical or horizontal) when converting [Horizontal
execution results to a CSV-format file. direction]
One of the following two items is selectable:
 Horizontal direction
 Vertical direction

2-14 CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 2.4 Result Menu

Item Description Initial Value

Expression method of Specify whether to output the workpiece with row and column or serial numbers. [Row - Column]
workpiece One of the following three items is selectable:
 Row - Column
 Use separator (,) between row and column
 Serial numbers

Folder This field displays the folder path for the result file output destination.

[Browse] button Use this button to specify the folder of the result file output destination.
2
File name This field displays the output CSV file name.

Menu Bar
[OK] button Use this button to start file conversion based on the settings and close the pane.
When there is no measurement result, a message appears.

[Cancel] button Use this button to discard the settings and close the pane.

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 2-15

 2.5 Setting Menu

2.5 Setting Menu

This menu is used to make NEXIV MapMeasure user account settings and language setting.

Menu Item Function Description Keyboard Shortcut

User account setting Use this menu to display, register, edit and delete user accounts. –

Language setting Use this menu to change the language setting for the application. –

2
2.5.1 User Account Setting
Menu Bar

This menu item displays, registers, edits, and deletes user accounts that are entered during the login procedure.

Operations for user account settings are limited only to persons with the administrator privilege.
Two users of administrator (NEXIV3-MGR) and operator (NEXIV3-OP) are registered initially when the system is
introduced.

Selecting [Settings] - [User account setting] on the menu bar displays the [User Account Setting] pane.

(1) User Account Setting

The following window lists registered users:

List of users

Item Description Initial Value

Current login user name This field displays the current login user name.

[Auto login by current user in Select this checkbox when logging in to the system with the current login user. ON
next startup] checkbox When this checkbox is selected, login operation is skipped at the next and
subsequent login and the user does not need to enter a password.

List of user This field displays a list of registered users.

User name This field displays login user names.

Profile This field displays user privileges.

Usable functions are limited depending on the privilege.

Layout This field displays the panel layout name to be shown after login.

Password This field displays whether user’s password input is necessary or not during the
login procedure
 *: User’s password input is necessary.
 <none>: User’s password input is not necessary.

2-16 CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 2.5 Setting Menu

Item Description Initial Value

[Record new] button Use this button to register a user newly.

Clicking this button displays the [User Account <New User>] pane.

[Edit] button Use this button to edit registered users.

Select the user to be edited from the user list and click the [Edit] button. The
[Edit] pane opens.

[Delete] button Use this button to delete registered users.

Select the user to be deleted from the user list and click the [Delete] button. The 2
[Delete] dialog box opens.

[Close] button Use this button to close the pane.

Menu Bar
(2) Record new

The following window is used to register a new user.

Click the [Record new] button in the [User Account Setting] pane to open this pane.

Item Description Initial Value

User name Enter the login user name.

If a registered user name is entered, an error dialog box opens.

Password Enter the login password.

When operator is selected from the Profile column, an arbitrary password can be
entered. (If a user is registered with no password entered, [none] is displayed in the
[Password] area of the [User Account Setting] pane.)

[Profile] drop-down list Click and select administrator or operator as a privilege.

[OK] button Use this button to create a user, close the pane, and display the [User Account
Setting] pane.

[Cancel] button Use this button to discard the settings, close the pane, and display the [User Account
Setting] pane.

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 2-17

 2.5 Setting Menu

(3) Edit

The following window is used to edit registered users.

Select the user to be edited in the [User Account Setting] pane and click the [Edit] button to open this window.

The current login user cannot change his/her own profile.

Other procedures for using this window are the same for the [New User] pane.

2
Menu Bar

(4) Delete

The following dialog box is used to delete registered users.

Select the user to be deleted in the [User Account Setting] pane and click the [Delete] button to open the confirmation
dialog box.
Deleting operations for these two users (administrator and operator) are disabled. The current login user cannot be
deleted either.

Item Description Initial Value

[Yes] button Use this button to delete the selected user and close the dialog box.

[No] button Use this button to close the dialog box.

2-18 CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 2.5 Setting Menu

2.5.2 Language Setting

This menu item changes the language setting for the NEXIV MapMeasure.

The languages for which the language resource data exists are displayed in the drop-down list. Select the required
language and then restart the NEXIV MapMeasure.

Menu Bar

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 2-19

 2.5 Setting Menu

2
Menu Bar

2-20 CNC Video Measuring System NEXIV MapMeasure Instruction Manual

 3. Function List for Each User Account Privilege

3 Function List for Each User Account Privilege

The table below lists the availability of functions (menu items) by the User Account privilege.

Y: Selectable N: Not selectable

Menu Level
No Operator Manager
Level 1 Level 2 Level 3 Level 4

1 File New – – N Y

2 Open – – Y Y

3 Save file – – N Y 3
4 Save as – – N Y

Function List for Each User Account Privilege

5 Recent nrcp file 1 – – Y Y

6 Recent nrcp file 2 – – Y Y

7 Recent nrcp file 3 – – Y Y

8 Recent nrcp file 4 – – Y Y

9 Exit application – – Y Y

10 Map New – – N Y

11 Open – – N Y

12 Save file – – N Y

13 Save as – – N Y

14 Recent nmap file 1 – – N Y

15 Recent nmap file 2 – – N Y

16 Recent nmap file 3 – – N Y

17 Recent nmap file 4 – – N Y

18 View Enlarge display – Y Y

19 Reduce display – Y Y

20 Detailed Settings – – N Y

21 Measurement Run – – Y Y

22 End – – Y Y

23 Detail Settings – – Y Y

24 Result File Conversion – – N Y

25 Settings User account setting – – N Y

26 Language setting – – N Y

CNC Video Measuring System NEXIV MapMeasure Instruction Manual 3-1