Scribd
Upload
33 views6 pages

Questionnaire HSE Induction

The document is a Health, Safety, and Environment (HSE) questionnaire designed for induction training, covering various safety topics such as PPE usage, excavation safety, electrical safety, and fire safety. It includes multiple-choice questions to assess trainees' knowledge on safety protocols and practices. The questionnaire emphasizes the importance of safety measures in construction and outlines the required personal protective equipment (PPE) and safety procedures.

Uploaded by

Vikram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
33 views6 pages

Questionnaire HSE Induction

The document is a Health, Safety, and Environment (HSE) questionnaire designed for induction training, covering various safety topics such as PPE usage, excavation safety, electrical safety, and fire safety. It includes multiple-choice questions to assess trainees' knowledge on safety protocols and practices. The questionnaire emphasizes the importance of safety measures in construction and outlines the required personal protective equipment (PPE) and safety procedures.

Uploaded by

Vikram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 6

HSE Questionnaire

HSE INDUCTION TRAINING


Name of the Trainee:
Date:

Q.
Question
No.

A. PPE

Chose the right reson for using below shown PPE’s.

1. (a) Prevent head injury.


(b) Prevention from sunlight.

Chose the right reson for using below shown PPE’s.

2. (a) Prevent injury from falling objects,compression, and puncture.


(b) Prevention from rain water.

Chose the right reson for using below shown PPE’s.

3. (a) It protect against cold or heat, damage by friction, abrasion or chemicals.


(b) It provide a protection against food poisoning.

Chose the right reson for using below shown PPE’s.


4. (a) Prevent particulates, water or chemicals from striking the eyes.
(b) Improve the visibility.

Chose the right set of mandatory PPE of PTA project.


(a) Safety Helmet, Safety Shoe, Safety Goggles, Hand Gloves and Relective jacket.
(b) Safety Helmet, Safety Shoe, Safety Goggles, Hand Gloves and Nose Musk.

5.

B. EXCAVATION

Hard barrication shall be installed at a distance of ___________ from the edge of the excavation.
(a) 1 Meter
(b) 3 Meter
6.

Page 1 of 6
Permit should be obtained before proceeding for any excavation to prevent damage of underground utilities i.e.
electrical power cables, water pipe line etc.
7. CORRECT/ INCORRECT

C. CONCREATING

________________________ should be worn to prevent concrete from


flowing in when workmen must stand in fresh concrete.
8.
(a) Gum boot
(b) Chappell

D. ELECTRICAL SAFETY

Pick the correct one.

9.

(a) (b)

Pick the correct one.

10.

(a) (b)

Pick the correct one.

11.

(a) (b) (c)

Page 2 of 6
E. HOUSEKEEPING

All waste generated during construction shall be collected in designated area or in dustbin.
12.
Correct/ Incorrect

F WORKINGA AT HEIGHT

Full body harness or safety belt should be worn while working on or above_________________ height.
(a) 1.8 meter
(b) 3.8 meter
13.

G. ENVIRONMENTAL AWARENESS

Blue Color dustbin used for collection of________________________.


(c) Non-hazardous/Recyclable wastes (paper, plastic, rubber , bottle etc)

14. (d) Bio medical waste

Green Color dustbin used for collection of________________________.


(a) Food waste
(b) Bio medical waste

15.

H LADDER SAFETY

A ladder should be extended to a height at least __________ above


the work-platform.
(a) 1 meter.
(b) 3 meter.

16.

Page 3 of 6
Which one is safe?

17.

(a) (b)

I. SCAFFOLDING SAFETY

Which color of scaffolding tag indicate that the scaffolding is safe for use.
(a) Red

18. (b) Green

Which color of scaffolding tag indicate that the scaffolding is unsafe for use.
(a) Red
19. (b) Green

J. RAOD SAFETY

What is the speed limit for vehicles inside the PTA?


(a) 20km/hr
20. (b) 50km/hr
?
K. MATERIAL HANDLING SAFETY

Which one is correct?

21.

(a) (b)

L. RIGGING & LIFTING SAFETY

Page 4 of 6
Pick the correct one (√ ).
(a) Barricade entire area of lift operation. Don’t allow anybody
inside barricaded area and under suspended load.
22.
(b) Barricade the crane swing area.

Tag lines are used to ___________________________.


(a) Control movement of the load during handling.
23. (b) Decrease the weight of the load.

M. HOT WORK SAFETY

Combustible and flammable materials should be removed from the below or surrounding of hot work (welding,
24. gas-cutting, grinding etc) area.
CORRECT/ INCORRECT

Compressed gas cylinder should be transported in __________________.


(a) Trolley
25. (b) Shoulder.

___________________ is used to arrest molten slag /hot spatters during hot work at height.
(a) Fire blanket
26. (b) Jute Bag
(c) Empty cement bag

N. EMERGENCY

What does it indicate?


(a) Assembly Point
27 (b) Fire Point
(c) Dirking water point.

What is the project emergency contact no for PTA ?


(a) 8105137715
28
(b) 18004194949
(c) 934184523

Page 5 of 6
If you got injured, where you should go?
(a) First-aid center
29
(b) Fire station
(c) Store

O FIRE SAFETY

What are the components required to ignite a fire?


(a) Heat, Fuel and Oxygen.
30
(b) Fuel, Oxygen and Water.

Identify the material.


(a) Dustbin

31 (b) Fire Extinguisher

DCP (dry chemical powder) fire extinguisher is suitable for extinguish ___________________ type of fire.
(a) A & B
32
(b) B & C
(c) C & D

Water should not be used for extinguish fire causing oil & solvents because ____________________.
33 (a) Thay are lighter than water
(b) Thay are havaior than water.

P PLANT AND MACHINERY SAFETY

All rotating & Moving parts of machines should be _____________.


(a) Guarded
34 (b) Kept open.

Q HELTH AND HYGINE

Skin contaminated with wet or dry cement shall be washed with clean and normal running water as soon as
35 possible.
Correct/ Incorrect

Remarks: PASS / FAIL


Note: Each Question carries 2 marks. Pass mark 80%

Page 6 of 6

You might also like