ZEAL EDUCATION SOCIETY’S

ZEAL POLYTECHNIC, PUNE

NARHE │PUNE -41 │ INDIA
DEPARTMENT OF ELECTRICAL ENGINEERING

Assignment No.: 1
Academic Year: 2022-23
Name of the Program: Elecrical Engineering Semester: IV
Name of the Course: Electric motor and transformer. Course Code: 22418
Max. Marks: 10 Date of Submission:
Instructions:
1. Illustrate your answers with neat sketches wherever necessary.
2. Figures to the right indicate full marks.
3. Assume suitable data if necessary.
4. Preferably, write the answers in sequential order.
5. Submit your assignment in due date.

Q.
Question Marks CO TL
No.
1 State any four parts of the D.C motor. 4 CO418.1 U
2 State the working principal of d.c. generator. 2 CO418.1 R
State function of following parts of D.C motor: (i) Pole shoe (ii)
3 2 CO418.1 A
Commutator (iii) Brushes (iv) Yoke
4 Explain the principal of working of three phase induction motor. 4 CO418.1 R
5 State Fleming‟s Right Hand Rule. 2 CO418.1 A
6 State the working principle of DC generator. 4 CO418.1 U
7 Explain the working principle of induction motor. 4 CO418.1 R
State at least one function and the material used for the following
8 4 CO418.1 U
parts of DC Motor.
Select or suggest any two applications for: (i) D.C shunt motor (ii)
9 4 CO418.1 A
D.C series motor
10 Classify the different types of motors. 4 CO418.1 A

TL Marks %
R 12 38
U 10 31
A 10 31

Course Coordinator Module Coordinator

Page 1 of 11
 ZEAL EDUCATION SOCIETY’S

ZEAL POLYTECHNIC, PUNE

NARHE │PUNE -41 │ INDIA
DEPARTMENT OF ELECTRICAL ENGINEERING
Assignment No.: 2
Academic Year: 2022-23
Name of the Program: Elecrical Engineering Semester: IV
Name of the Course: : Electric motor and transformer. Course Code: 22418
Max. Marks: 10 Date of Submission:
Instructions:
1. Illustrate your answers with neat sketches wherever necessary.
2. Figures to the right indicate full marks.
3. Assume suitable data if necessary.
4. Preferably, write the answers in sequential order.
5. Submit your assignment in due date.
Q.
Question Marks CO TL
No.
1 Explain construction and working of Brushless D.C motor. 4 CO418.1 R
State the function of following parts of an induction motor.
2 4 CO418.1 U
1.slipring 2.fan 3.brushes 4.frame
Compare squirrel cage and slipring induction motor on the basis of
3 2 CO418.1 R
1. Costruction 2.performamce 3.speed control 4.applications
4 State the working principle of DC motor. 4 CO418.1 U
5 State why three phase induction motor never run on synchronous speed ? 2 CO418.1 A
6 Why the single phase induction motor is not self starting. 2 CO418.1 R
7 State the double field revolving theory of single phase induction motor. 2 CO418.1 U
With a neat circuit diagram, explain construction and working principle of a
8 4 CO418.1 A
capacitor start induction run 1 phase induction motor.
Explain working of capacitor start and capacitor run single phase induction
9 4 CO418.1 R
motor.
10 Describe the working of A.C servo motor. 4 CO418.1 A

TL Marks %
R 12 38
U 10 31
A 10 31

Course Coordinator Module Coordinator

ZEAL EDUCATION SOCIETY’S

ZEAL POLYTECHNIC, PUNE

NARHE │PUNE -41 │ INDIA
Page 2 of 11
 DEPARTMENT OF ELECTRICAL ENGINEERING
Assignment No.: 3
Academic Year: 2022-23
Name of the Program: Elecrical Engineering Semester: IV
Name of the Course: : Electric motor and transformer. Course Code: 22418
Max. Marks: 10 Date of Submission:
Instructions:
1. Illustrate your answers with neat sketches wherever necessary.
2. Figures to the right indicate full marks.
3. Assume suitable data if necessary.
4. Preferably, write the answers in sequential order.
5. Submit your assignment in due date.
Q.
Question Marks CO TL
No.
1 Draw a neat labeled sketch of three-point starter. 4 CO418.2 R
Describe with suitable diagram speed control of DC shunt motor by field
2 4 CO418.2 U
current control method.
A 4 pole, 220V shunt motor has 540 lap wound conductor. It takes
32 A from the supply mains and develops output power of 5.595
3 kW. The field winding takes 1A. The armature resistance is 0.09Ω 4 CO418.2 A
and flux per pole is 30 mWb. Calculate: i) The speed and ii) The
torque developed in N-m.
4 “DC series motor should never be started at no load”. Justify. 4 CO418.2 R
Explain the necessity of starter for D.C. motor. State various types of D.C.
5 4 CO418.2 A
motor starter.
A 250V shunt motor on no load runs at 1000 rpm and takes 5 A. The total
armature and shunt field resistance are respectively 0.2Ω and 250Ω.
6 4 CO418.2 U
Calculate the speed when loaded and taking a current of 50A, if armature
reaction weaken on field by 3%.
Explain with the help of neat diagram, the following methods of speed
7 control for DC series motor. i) Field diverter method. ii) Tapped field 4 CO418.2 A
method.
State the rule used for calculating direction of e.m.f. induced in armature
8 2 CO418.2 R
winding of D.C Generator.
A dc series motor runs at 600rpm taking 100Amp from 230V
supply. Armature and series field winding resistances 0.12Ω and
9 4 CO418.2 U
0.03Ω respectively. Calculate the speed when current has fallen to
50amp. Assume flux to be directly proportional to field current.
10 State fleming’s left hand rule. 4 CO418.2 R

TL Marks %
R 14 38
U 12 31
A 12 31

Course Coordinator Module Coordinator

Page 3 of 11
 ZEAL EDUCATION SOCIETY’S

ZEAL POLYTECHNIC, PUNE

NARHE │PUNE -41 │ INDIA
DEPARTMENT OF ELECTRICAL ENGINEERING
Assignment No.: 4
Academic Year: 2022-23
Name of the Program: Elecrical Engineering Semester: IV
Name of the Course: : Electric motor and transformer Course Code: 22418
Max. Marks: 10 Date of Submission:
Instructions:
1. Illustrate your answers with neat sketches wherever necessary.
2. Figures to the right indicate full marks.
3. Assume suitable data if necessary.
4. Preferably, write the answers in sequential order.
5. Submit your assignment in due date.
Q.
Question Marks CO TL
No.
1 State fleming’s right hand rule. 4 CO418.2 U
2 Distinguish between lap and wave windings, 4 CO418.2 A
3 Derive the E.M.F. equation of D.C generator. 4 CO418.2 R
Determine the flux per pole of six pole generator required to generate 240 V at
4 4 CO418.2 U
500 rpm the armaturewinding has 1080 conductors and are lap connected.
5 What is back EMF in DC motor and expain its singnificance . 4 CO418.2 A

6 Write voltage equation and power equation of DC motor. 4 CO418.2 R

7 Give the classification of DC motor. 2 CO418.2 R

Draw the circuit diagram of
8 1.dc series motor 4 CO418.2 U
2.dc long shunt compound motor.
Draw
1.torque Vs armature current.
9 4 CO418.2 A
2.speed Vs armature current.
Characteristics for DC shunt motor.
Explain with suitable diagram flux control method for speed contrl of DC series
10 motor.
4 CO418.2 R

TL Marks %
R 14 38
U 12 31
A 12 31

Course Coordinator Module Coordinator

Page 4 of 11
 ZEAL EDUCATION SOCIETY’S

ZEAL POLYTECHNIC, PUNE

NARHE │PUNE -41 │ INDIA
DEPARTMENT OF ELECTRICAL ENGINEERING
Assignment No.: 5
Academic Year: 2022-23
Name of the Program: Elecrical Engineering Semester: IV
Name of the Course: : Electric motor and transformer. Course Code: 22418
Max. Marks: 10 Date of Submission:
Instructions:
1. Illustrate your answers with neat sketches wherever necessary.
2. Figures to the right indicate full marks.
3. Assume suitable data if necessary.
4. Preferably, write the answers in sequential order.
5. Submit your assignment in due date.
Q.
Question Marks CO TL
No.
1 State principle operation of a transformer. 2 CO418.3 R
2 List various losses take place in a transformer. 4 CO418.3 A
3 Draw circuit diagram for polarity test on single-phase transformer. 4 CO418.3 U
Compare core type and shell type transformer on any four
4 4 CO418.3 R
parameters.
Draw a neat experimental set up to conduct OC test on a single
5 4 CO418.3 U
phase transformer.
Explain with circuit diagram, the direct loading tests on single
6 phase transformer. How the efficiency and regulation at given load 2 CO418.3 R
condition is determined?
State why a transformer always have an efficiency of more than
7 90%. 2 CO418.3 U

8 Derive the emf equation of a transformer. 2 CO418.3 A

A single phase transformer has 300 turns on its primary side and
750 turns on its secondary side, the maximum flux density in the
9 core is 1Wb/m2 , calculate: (i) The net cross sectional area of the 4 CO418.3 A
core, (ii) The emf induced in the secondary side.

10 . Compare core type and shell type transformer. 4 CO418.3 R

TL Marks %
R 12 38
U 10 31
A 10 31

Course Coordinator Module Coordinator

Page 5 of 11
 ZEAL EDUCATION SOCIETY’S

ZEAL POLYTECHNIC, PUNE

NARHE │PUNE -41 │ INDIA
DEPARTMENT OF ELECTRICAL ENGINEERING
Assignment No.: 6
Academic Year: 2022-23
Name of the Program: Elecrical Engineering Semester: IV
Name of the Course: : Electric motor and transformer. Course Code:22418
Max. Marks: 10 Date of Submission:
Instructions:
1. Illustrate your answers with neat sketches wherever necessary.
2. Figures to the right indicate full marks.
3. Assume suitable data if necessary.
4. Preferably, write the answers in sequential order.
5. Submit your assignment in due date.
Q.
Question Marks CO TL
No.
State the criteria of selection of power transformer as per IS:10028
1 4 CO418.3 R
(part-I).
2 Explain the Polarity test of a transformer. Why it is necessary? 4 CO418.3 U
A 20 KVA, 2200/220V, 50 Hz transformer. The OC / SC test result are as
3 follows O.C. test: 220V, 4.2A, 148W (L.V. side) S.C test: 86V ,10.5A, 4 CO418.3 R
360W (H.V. side) Determine the regulation at 0.8 pf lagging at full load.
A 500 kVA, 3-phase, 50 Hz transformer has a voltage ratio (line voltages)
of 33/11 kV and is delta/star connected. The resistance per phase are:
4 4 CO418.3 A
high voltage 35Ω, low voltage 0.876Ω and iron loss is 3050W. Calculate
the value of efficiency at full load.
Find the all-day efficiency of 500kVA distribution transformer whose
copper loss and iron loss at full load are 4.5kW and 3.5kW respectively.
During a day of 24 hours, it is loaded as under:

5 4 CO418.3 U

A 250/125 V, 5 kVA single-phase transformer has primary resistance of

0.2 Ω and reactance of 0.75 Ω. The secondary resistance is 0.05 Ω and
6 2 CO418.3 R
reactance of 0.2 Ω. Determine its regulation while supplying full load on
0.8 leading P.F.
A 3300/250V, 50Hz single phase transformer is built on a core having an
effective cross sectional area of 125 cm 2 and 70 turns on the low
7 4 CO418.3 U
voltage winding. Calculate: i) The value of max. flux density. ii) Number
of turns on high voltage windings.
Draw the equivalent circuit of transformer referred to primary. State the
8 4 CO418.3 A
meaning of each term related to equivalent circuit.
Define voltage transformation ratio of transformer.
9 4 CO418.3 R
d) In 20 kVA, 1000/400 V, 1-ph, 50Hz transformer, iron and full
10 load copper losses are 300 W & 500W respectively. Calculate the 4 CO418.3 A
efficiency at ¾ full load at unity power factor.

Page 6 of 11
 TL Marks %
R 14 38
U 12 31
A 12 31

Course Coordinator Module Coordinator

Page 7 of 11
 ZEAL EDUCATION SOCIETY’S

ZEAL POLYTECHNIC, PUNE

NARHE │PUNE -41 │ INDIA
DEPARTMENT OF ELECTRICAL ENGINEERING
Assignment No.: 7
Academic Year: 2022-23
Name of the Program: Elecrical Engineering Semester: IV
Name of the Course: : Electric motor and transformer. Course Code: 22418
Max. Marks: 10 Date of Submission:
Instructions:
1. Illustrate your answers with neat sketches wherever necessary.
2. Figures to the right indicate full marks.
3. Assume suitable data if necessary.
4. Preferably, write the answers in sequential order.
5. Submit your assignment in due date.
Q.
Question Marks CO TL
No.
1 List the condition for parallel operation of three phase transformer. 4 CO418.4 R

2 Give the specification of three phase transformer as per IS 1180 (Part-1). 4 CO418.4 U
Describe the method of converting three-phase to two-phase
3 4 CO418.4 A
transformer by neat diagram. State any two applications.
With the help of neat diagram, describe the procedure to carry out
4 phasing out test on a 3-phase transformer. Also state the purpose of 2 CO418.4 R
conducting this test on 3 phase transformer.
Explain with the neat circuit diagram only the scott connection scheme
5 for conversion of three phase supply to two phase supply. Name one 4 CO418.4 A
application of the same.
6 List the Conditions for parallel operation of three phase transformer. 4 CO418.4 U

7 Explain the effect of Harmonics on the Transformer. 4 CO418.4 R

Give any four selection criteria for : i) Distribution transformer ii)
8 Power transformer. 4 CO418.4 A

State any two conditions of parallel operation of three phase

9 transformer. 4 CO418.4 U

10 State the importance of “K” factor of transformer. 4 CO418.4 R

TL Marks %
R 14 38
U 12 31
A 12 31

Course Coordinator Module Coordinator

Page 8 of 11
 ZEAL EDUCATION SOCIETY’S

ZEAL POLYTECHNIC, PUNE

NARHE │PUNE -41 │ INDIA
DEPARTMENT OF ELECTRICAL ENGINEERING
Assignment No.: 8
Academic Year: 2022-23
Name of the Program: Elecrical Engineering Semester: IV
Name of the Course: : Electric motor and transformer. Course Code: 22418
Max. Marks: 10 Date of Submission:
Instructions:
1. Illustrate your answers with neat sketches wherever necessary.
2. Figures to the right indicate full marks.
3. Assume suitable data if necessary.
4. Preferably, write the answers in sequential order.
5. Submit your assignment in due date.
Q.
Question Marks CO TL
No.
Compare the distribution and power transformer on any four
1 4 CO418.4 A
points.
2 Explain the effects of harmonics on the operation of transformer. 4 CO418.4 U
Describe with neat relevant diagram, the test carried out on three
3 phase transformer to identify the windings corresponding to same 4 CO418.4 R
phase.
Give the criteria for selection of distribution transformer and
4 4 CO418.4 A
power transformer as per IS : 10028 (part - I)
State any two advantage of three phase transformer over bank of single
5 4 CO418.4 R
phase transformers.
6 Give any two advantage of star-star connection in 3 phase transformer. 4 CO418.4 U

7 Explain V-V connection of 3 phase transformer. 2 CO418.4 R

8 Write selection criteria of distribution transformer with ang four points. 4 CO418.4 U

Compare distribution transformer and power transformer on any four

9 4 CO418.4 R
points.
What is aim of conducting phasing out test on three phase
10 transformer? Draw diagrams for phasing out test. 4 CO418.4 A

TL Marks %
R 14 38
U 12 31
A 12 31

Course Coordinator Module Coordinator

Page 9 of 11
 ZEAL EDUCATION SOCIETY’S

ZEAL POLYTECHNIC, PUNE

NARHE │PUNE -41 │ INDIA
DEPARTMENT OF ELECTRICAL ENGINEERING
Assignment No.: 9
Academic Year: 2022-23
Name of the Program: Elecrical Engineering Semester: IV
Name of the Course: Electric motor and transformer Course Code: 22418
Max. Marks: 10 Date of Submission:
Instructions:
1. Illustrate your answers with neat sketches wherever necessary.
2. Figures to the right indicate full marks.
3. Assume suitable data if necessary.
4. Preferably, write the answers in sequential order.
5. Submit your assignment in due date.
Q.
Question Marks CO TL
No.
1 Define current transformer. 2 CO418.5 R
2 State the function of the isolation transformer. 2 CO418.5 A
Describe the method for measurement of high voltage in a.c circuit using
3 4 CO418.5 U
potential transformer.
4 State two applications of isolation transformer. 4 CO418.5 R
5 List two special feature of welding transformer. 4 CO418.5 U
Explain with circuit diagram use of potential transformer to measure
6 33kV. 4 CO418.5 A

Explain with the help of neat diagram working of 3 phase

7 4 CO418.5 R
autotransformer. Write any two application.
8 State any two application of pulse transformer. 2 CO418.5 A
9 Write down any two applications of single Phase auto transformer. 4 CO418.5 U
State any one advantage and any one disadvantage of potential
10 2 CO418.5 R
transformer.

TL Marks %
R 12 38
U 10 31
A 10 31

Course Coordinator Module Coordinator

Page 10 of 11
Page 11 of 11