Catalog Number

Notes Type

Description Mechanical
Petrolux® LED For demanding environments where dust, dirt and moisture
are a concern.
• Robust cast aluminum housing with low copper
content (0.6% CU content) withstands harsh or hostile
Wet Location for Demanding Environments Certain airborne contaminants may adversely affect the environments.
functioning of LEDs and other electronic components, • Universal mount top cover (ceiling/pendant) is standard.
depending on various factors such as concentrations of the • Optional universal arm available for wall/stanchion. Other
contaminants, ventilation, and temperature at the end-user mountings include gasketed hook and yoke mount.
location. Click here for a list of substances that may
not be suitable for interaction with LEDs and other • Precise number of fins dissipate maximum amount of heat.
electronic components.
Listings
Optics • UL Listed to US and Canadian Standards
• Prismatic borosilicate glass directs light where needed and • Suitable for use in wet locations
reduces harsh glare. • -40°F (-40°C) to 131°F (55°C) ambient temperature rating
• Polycarbonate lens available for those applications requiring (see chart for details)
non-glass options. • IP66 rated
• Three distributions (Type 5 low angle, Type 5 high angle, and
Type 1 long and narrow) available to maximize versatility. Warranty
• Highly engineered LED system ensures superior uniformity 5-year limited warranty. This is the only warranty provided
and maximizes spacing. and no other statements in this specification sheet create any
warranty of any kind. All other express and implied warranties
Electrical are disclaimed. Complete warranty terms located at: www.
acuitybrands.com/support/warranty/terms-and-conditions
• Luminaire Surge Protection Level: Designed to withstand
up to 10kV/5kA per ANSI C82.77-5-2015. Note: Actual performance may differ as a result of end-user
• 0-10V dimming driver is standard, dims to 10%. environment and application.
• CRI > 70 (nominal) is standard. All values are design or typical values, measured under
laboratory conditions at 25 °C.
• 3000K, 4000K or 5000K CCT available.
• Fault-tolerant LED light engine continues to provide light
even in the failure of one LED.

Typical Applications Dimensions

TM • Petroleum refineries • Water and wastewater Diameter: 14.76 in. (374.9 mm.)
• Ethanol facilities treatment facilities Depth: 13.57 in. (344.68 mm.)
• Chemical plants • Parking garages Weight: 38-45 lbs. (17.24-20.41 kg.)
• Power plants • Tunnels EPA: 1.21 sq.ft.
• Textile mills

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | [email protected] PLED2
© 2011-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 01/09/25 Specifications subject to change without notice. Page 1 of 5
Petrolux® LED
Wet Location for Demanding Environments

ORDERING INFORMATION Example: PLED2 5000LM L5 MVOLT 40K 70CRI UNM DGXD

Color rendering
Series Lumens Distribution Voltage Color temperature index Mounting
PLED2 5000LM 5000 lumens L5 Type 5, low angle, MVOLT Auto sensing HVOLT Auto sensing 30K 3000K CCT 70CRI UNM Universal ‡
8000LM 8000 lumens glass (120-277V, (347-480V, 40K 4000K CCT GHK Gasketed hook
L5FR Type 5, low angle, 50/60Hz) 50/60Hz) (HKMW) ‡
10000LM 10,000 lumens 50K 5000K CCT
glass frosted 120 120V, 347 347V, YK0 0° yoke mount
12000LM 12,000 lumens 50/60Hz 50/60Hz
L5H Type 5, high angle, bracket
15000LM 15,000 lumens glass 208 208V, 480 480V, YK45 45° yoke
18000LM 18,000 lumens ‡ L5HFR Type 5, high angle, 50/60Hz 50/60Hz mount bracket
glass frosted 240 240V,
LND Type 1, long and 50/60Hz
narrow, glass ‡ 277 277V,
LNDFR Type 1, long and 50/60Hz
narrow, glass
frosted ‡
L5P Type 5, low angle,
polycarbonate
L5HP Type 5, high angle,
polycarbonate
LNDP Type 1, long
and narrow,
polycarbonate ‡

Cordsets Options Finish

Wet Location Cordsets: Photocell Options: Individual non-dimming sensors: DWHXD White
CPTL16WWL Cord with NEMA 15 amp P34 DTL solid state photo control, 347V ‡ SBOR6 High Mount Sensor, (15-30' mounting heights), on/off DGXD Gray
twist lock plug, 16 gauge, P48 DTL solid state photo control, 480V ‡ occupancy, outdoor PIR, previously MSI6NWL (LINK) ‡
3 conductor, white, wet Individual dimming sensors:
location, 6 feet ‡ PCS DTL solid state photo control. AS,
120-277V ‡ SBOR6 D 0V High Mount Sensor, (15-30' mounting heights), occupancy
CNP16WWL Cord only, no plug, 16 controlled dimming, outdoor PIR, previously MSI62L0VWL
gauge, 3 conductor, white, PER NEMA twistlock receptacle ‡
(LINK) ‡
wet location, 6 feet ‡ PER45 NEMA twistlock receptacle 45°
mounting ‡ SBOR6 ODP 0V High Mount Sensor, (15-30' mounting heights), occupancy
L/CORD No Cord controlled dimming with on/off photocell, outdoor PIR
PSC Shorting cap ‡ with photocell, previously MSI62L0VWL DSCNWL (LINK) ‡
Other Options: Optional Mounting Arms: ‡
CR Corrosion Resistant Paint 072331PLED2 Substation arm for a single luminaire, up or down
EMD Ingress/egress marker decal orientation, includes one 5 conductor input feed cable
with 0-10V dimming
SPK Sample pack for ground transport
072331PLED2CTL Substation arm for a single luminaire with sensor, up or
UPS Uplight shield ‡ down orientation, includes one 3 conductor input feed
WGX Wire guard cable
072332PLED2 Substation arm for two luminaries, up and down
orientation, includes two 5 conductor cables for
independent fixture control with 0-10V dimming
072332PLED2CTL Substation arm for two luminaires (one with a sensor and
one without), up and down orientation, includes one 3
conductor cable for the sensor to control both luminaires
P3USPLED2 Universal mounting arm for wall or stanchion

Accessories: Order as separate catalog number.

HSCKX X Inch safety chain kit ‡ Substation Mounting Arms: ‡
MI3502 THREAD SEAL Thread sealant ‡ 072331PLED2 XX Substation arm for a single luminaire, up or down orientation, includes one 5 conductor input feed cable with 0-10V dimming
WGPLED2 Wire Guard 072331PLED2 CTL XX Substation arm for a single luminaire with sensor, up or down orientation, includes one 3 conductor input feed cable
UPSPLED2 XX Uplight Shield ‡ 072332PLED2 XX Substation arm for two luminaries, up and down orientation, includes two 5 conductor cables for independent fixture control
with 0-10V dimming
Universal Mounting Arm: ‡
072332PLED2 CTL XX Substation arm for two luminaires (one with a sensor and one without), up and down orientation, includes one 3 conductor
P3USPLED2 XX Wall/Stanchion Mount Arm cable for the sensor to control both luminaires

For footnotes, see page 3.

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | [email protected] PLED2
© 2011-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 01/09/25 Specifications subject to change without notice. Page 2 of 5
Petrolux® LED
Wet Location for Demanding Environments

ORDERING INFORMATION (cont.)

‡ Option Value Ordering Restrictions and Notes
Option value Restriction or Note
18000LM Available with L5, L5FR, L5H, L5HFR, L5P, and L5HP only.
CPTL16WWL Must specify voltage. Available with 120, 208, 240 or 277 only. 6' is standard, but 3' and 10' lengths are available. Must specify length for 3' and 10' options.
Example: CPTL16WWL3FT. NEMA Plug Configurations: 120 = L5-15P, 208 or 240 = L6-15P, 277 = L7-15P.
CNPWWL 6' is standard, but 3' and 10' lengths are available. Must specify length for 3' and 10' options. Example: CNPWWL3FT.
GHK Requires cord or cord and plug
HSCKX X denotes length. Available in multiple sizes. Replace X with size in inches. Example: SCK120 = 120 inches or 10 feet
LND, LNDFR, LNDP Not available with 18000LM.
MI3502 THREAD SEAL Order one 3ml tube per luminaire..
Optional Mounting Arms Arms will ship as a separate item. Finish will match option(s) chosen for the fixture.
P34 Requires PER or PER45 option. Available with 347 only.
P48 Requires PER or PER45 option. Available with 480 only.
PCS Requires PER or PER45 option. Available with 120, 208, 240 and 277 only.
PER, PER45 Must specify voltage. Available with 120, 208, 240, 277, 347 and 480 only. When ordered with UNM mounting, cannot utilize ceiling mounting. Not available with PER45, YK45
or sensor. PER and PER45 ships unattached and must be wired in the field.
PSC Requires PER or PER45 option.
SBOR6, SBOR6 D 0V, SBOR6 ODP 0V Available with AS, 120, 208, 240 or 277 only. Not available with YK0, YK45, PER, PER45, UPS or other sensor.
Substation Mounting Arms Available with UNM mounting only. XX denotes finish. Available with CR paint to match fixture finish.
Universal Mounting Arm Available with UNM mounting only. XX denotes finish. Available with CR paint to match fixture finish.
UNM Must order P3US for wall/stanchion installation.
UPS Available with L5, L5FR, and P5 optics only. Not available with sensor options. XX Denotes Color. Available with CR paint to match luminaire.
UPS PLED2 XX Available with L5, L5FR, and P5 optics only. Not available with sensor options.

DIMENSIONAL DATA
96mm
2X DIA 7.54mm (.297") (3.79")
Mounting holes
3/4" NPT
1" NPT
Both sides

P3US XX Accessory
(must order separately)

GASKETED HOOK MOUNTING (GHK) YOKE MOUNTING, 0° (YK0) YOKE MOUNTING, 45° (YK45)

1" NPT
1" NPT 264mm
2X DIA 9mm (.358") 123.95mm 375mm 319mm (10.40")
Mounting holes (4.88") (14.76") (12.57")
1 1/2" NPT 45°
UNIVERSAL MOUNTING (UNM)
369mm
(14.53")
1 1/2" NPT

Occupancy
2X DIA 7.54mm (.297") Sensor 275mm
225mm (10.82")
MOUNTING HOLES (8.85")
OCCUPANCY SENSOR OPTION
UNIVERSAL MOUNTING (UNM)
with P3US XX Accessory
(must order P3US separately)

324mm
522.29mm (12.75")
(20.56") To Optic
072331PLED2 SUBSTATION ARM
(UNM) - UP ORIENTATION
245mm 342mm
(9.64") (13.46")
GD Option

386mm 345mm
522.29mm (15.18") (13.57")
(20.56") SH Option
SH Option
072332PLED2 SUBSTATION ARM
(UNM) - UP/DOWN ORIENTATION UPLIGHT SHIELD (UPS) & OPTIC GUARD (WG) & SENSOR OPTIONS

522.29mm
(20.56")
072331PLED2 SUBSTATION ARM
(UNM) - DOWN ORIENTATION

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | [email protected] PLED2
© 2011-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 01/09/25 Specifications subject to change without notice. Page 3 of 5
Petrolux® LED
Wet Location for Demanding Environments

OPERATIONAL DATA

Operating Characteristics1
Ambient Rating Ambient Rating Delivered Lumens Delivered Lumens LPW @
Package Distribution Wattage
(120V - 277V) (347V / 480V) 5000K CCT @25°C2 4000K CCT @25°C2 5000K

L5 6,189 6,150 50 124

L5H 5,234 5,201 50 105
-40°F to 131°F -40°F to 104°F LND 5,066 5,035 50 101
PLED2 5000LM
(-40°C to 55°C) (-40°C to 40°C) L5P 4,493 4,493 50 90
L5HP 3,852 3,852 50 77
LNDP 3,772 3,772 50 75

L5 8,927 8,872 74 121

L5H 7,550 7,503 74 102
-40°F to 131°F -40°F to 104°F LND 7,308 7,263 74 99
PLED2 8000LM
(-40°C to 55°C) (-40°C to 40°C) L5P 6,522 6,481 74 88
L5HP 5,592 5,557 74 75
LNDP 5,476 5,442 74 74
L5 11,315 11,245 98 115
L5H 9,569 9,510 98 97
-40°F to 131°F -40°F to 104°F LND 9,263 9,205 98 94
PLED2 10000LM
(-40°C to 55°C) (-40°C to 40°C) L5P 8,266 N/A 98 84
L5HP 7,087 N/A 98 72
LNDP 6,940 N/A 98 71
L5 14,822 14,790 129 115
L5H 12,586 12,508 129 97
-40°F to 122°F -40°F to 95°F LND 12,183 12,107 129 94
PLED2 12000LM
(-40°C to 45°C) (-40°C to 35°C) L5P 10,872 10,804 129 84
L5HP 9,321 9,263 129 72
LNDP 9,128 9,071 129 71
L5 18,309 18,195 165 111
L5H 15,484 15,837 165 94
-40°F to 113°F -40°F to 95°F LND 14,988 14,895 165 91
PLED2 15000LM
(-40°C to 45°C) (-40°C to 35°C) L5P 13,375 13,292 165 81
L5HP 11,468 11,396 165 69
LNDP 11,230 11,160 165 68

L5 21,575 21,441 195 110

-40°F to 104°F -40°F to 86°F L5H 18,246 18,133 195 93
PLED2 18000LM
(-40°C to 40°C) (-40°C to 35°C) L5P 13,375 15,663 195 68
L5HP 13,513 13,429 195 69

Projected Lumen Maintenance (TM-21)3

Notes
15,000 30,000 45,000 60,000 100,000 1 Adding PER, PER45 options results in a max. ambient of 40°C.
Package4 0 Hours Hours Hours Hours Hours Hours 2 Absolute photometry calculated in accordance with IESNA LM-79-08.
3 Calculated using data collected according to LM-80 and represents lumen maintenance
of the LED package.
PLED2 5000LM 1.0 0.96 0.94 0.93 0.91 0.88
4 Project lumen maintenance factors at max. ambient temperature per lumen package.
PLED2 8000LM 1.0 0.96 0.94 0.93 0.91 0.88

PLED2 10000LM 1.0 0.96 0.94 0.93 0.91 0.88

PLED2 12000LM 1.0 0.95 0.93 0.91 0.90 0.85

PLED2 15000LM 1.0 0.95 0.93 0.91 0.90 0.85

PLED2 18000LM 1.0 0.95 0.93 0.91 0.90 0.85

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | [email protected] PLED2
© 2011-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 01/09/25 Specifications subject to change without notice. Page 4 of 5
Petrolux® LED
Wet Location for Demanding Environments

DISTRIBUTION DATA

Petrolux LED Type 5 Low Angle Petrolux LED Type 5 High Angle Petrolux LED Type 1 Petrolux LED Type 5-0% Uplight
90° 90° 90° 90°

80° 80° 80° 80°

700 600

70° 70° 70° 2000 70°

900 1200

60° 60° 60° 60°

2100

4000
2250
50° 50° 50° 50°

0° 10° 20° 30° 40° 0° 10° 20° 30° 40° 0° 10° 20° 30° 40° 0° 10° 20° 30° 40°

Number of LED Boards and Drivers Used

Number of Number of
Lumen Package Voltage LED Boards Drivers

MVOLT, 120, 208, 240, 277 2 1

5000LM
HVOLT, 347, 480 2 1

MVOLT, 120, 208, 240, 278 2 1

8000LM
HVOLT, 347, 481 2 1

MVOLT, 120, 208, 240, 279 2 1

10000LM
HVOLT, 347, 482 2 1

MVOLT, 120, 208, 240, 280 2 1

12000LM
HVOLT, 347, 483 2 1

MVOLT, 120, 208, 240, 281 2 2

15000LM
HVOLT, 347, 484 2 2

MVOLT, 120, 208, 240, 282 2 2

18000LM
HVOLT, 347, 485 2 2

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | [email protected] PLED2
© 2011-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 01/09/25 Specifications subject to change without notice. Page 5 of 5