Scribd
Upload
14 views

CE2201 Structural Analysis Assignment-2

This document is an assignment for the CE2201: Structural Analysis course at IIT Patna, due on April 11, 2025. It includes five problems that require the application of various structural analysis methods, such as the flexibility coefficient force method and the three moment equation method, to determine support reactions, shear force, bending moment diagrams, and forces in truss members. Each problem is worth 20 points and involves analyzing different structural configurations as depicted in accompanying figures.

Uploaded by

aspirantshivam2k4
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
14 views

CE2201 Structural Analysis Assignment-2

This document is an assignment for the CE2201: Structural Analysis course at IIT Patna, due on April 11, 2025. It includes five problems that require the application of various structural analysis methods, such as the flexibility coefficient force method and the three moment equation method, to determine support reactions, shear force, bending moment diagrams, and forces in truss members. Each problem is worth 20 points and involves analyzing different structural configurations as depicted in accompanying figures.

Uploaded by

aspirantshivam2k4
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Department of Civil and Environmental Engineering, IIT Patna Assignment-2

CE2201: Structural Analysis (Spring 2025) Due Date: 11.04.2025

Problem-1: (20 points)


For the below beam as shown in Figure-1, use flexibility coefficient force method to determine
the support reactions and draw the bending moment diagram.

Figure-1

Problem-2: (20 points)


Use force method (flexibility coefficient) to determine the support reactions for the given
indeterminate frame, as shown in Figure-2. Draw the shear force and bending moment diagram.

Figure-2

Problem-3: (20 points)


Determine the force in each member of the truss as shown in Figure-3. Assume the members
are pin connected at their ends. AE is constant.

Figure-3
Problem-4: (20 points)
The structural assembly supports the loading as shown in Figure-4. Draw the moment diagrams
for each of the beams. Take I = 108 mm4 for all the beams and A = 200 mm2 for the tie rod. All
members are made of steel for which E = 200 GPa.

Figure-4

Problem-5: (20 points)


Use three moment equation method to solve the indeterminate continuous beam as shown in
Figure-5 and determine the support reactions and support moments. Draw the bending moment
diagrams. Take E = 20 × 106 kN/m2 and Ic = 40 × 10-6 m4.

Figure-5

You might also like