GAS BLOW BACK

PP-2K
AIRSOFT SUBM A CHINE G UN

INSTRUCTION MANUAL
[PP-2K] Join Modify Airsoft
How-To Owners Group
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

A Component name Trigger

Sling Swivel
Charging Handle
Stock Release

Flash Hider Butt Stock

Magazine Release Fire Selector

Disassembly Lever
Propellant Type PP-2K Gas version PP-2K CO2 version
Weight(without mag) 1.3 KG 1.3 KG
Length (Retracted) 370 mm 370 mm
Magazine Length (Extended) 590 mm 590 mm

Hop Up Adjustment Inner Barrel Length 150 mm 150 mm

Inner Barrel Diameter 6.03 mm 6.03 mm
Magazine Capacity 22 rds 22 rds
Major Color BLACK / PINK / WHITE BLACK / PINK / WHITE
Caliber 6 mm BB 6 mm BB
260-310 fps (80-95 m/s) 280-310 fps(85-95 m/s)
Velocity (2 models)
295-330 fps (90-100 m/s) 360-395 fps(110-120 m/s)
Operating Temperature 20~25°C 68~77°F 20~25°C 68~77°F 1
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

B Magazine attachment
B-01 Load BBs B-02 GAS charging / Exchange CO2 Cartridge B-03 Magazine reloading
1. Push down 1. Push gas canister 1. Put CO2 cartridge in 1. Press magazine release button
magazine follower. nozzle into charging position and turn the to remove empty magazine and
2. Load BBs into the vavle. 4mm hex key clockwise then reinsert a new one.
opening till full. 2. Charge magazine to tighten.
until gas outflows from
charging vavle.

1
Make sure charging vavle and CAUTION :
gas canister nozzle are aligned When exchanging CO2
to avoid damage. cartridge, please make
DO NOT use high pressure gas sure it is empty before
(over 14 kg) to avoid damaging loosen the screw.
other parts.

2
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

C Operation
Tactical flashlight
C-01 Buttstock extension and retraction C-02 Buttstock removal and replacement C-03 installation/removal

1
1. Push the buttstock 1. Insert dedicated flashlight into bottom of
1 release button. the grip until it clicks.
1. Directly pull the 2. Remove accordingly.
buttstock clockwise
to extend.
2 1

1. Pull up the buttstock. 1 1. Push the buttstock

2 release button.
2. Turn the buttstock
1 counterclockwise 2. Install the buttstock
to retract. or extended magazine.

3
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

D Fire
D-01 Loading D-02 Select shooting mode D-03 Shooting

2
1.Insert magazine. 1.Pull trigger after loading.
2.Pull the charging
handle 90°. Safety

Full-Auto

3.Pull rearward to load.

(DO NOT do this on Safety)

Semi-Auto

CAUTION :
CAUTION : The charging handle moves with each shot
When shooting empty, remove the magazine fired to simulate real firearms.
Necessary before first firing and reloading. first before changing the shooting mode. Careful of finger placement.

4
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

E Hop Up Adjustment
E-01 Hop Up Adjustment E-02 Trajectory adjustment

Adjust nut in bottom of trigger guard with included Decrease the Hop Up if BBs travel upward.
3mm hex key. Increase if BBs travel downward.
Clockwise to increase and counterclockwise to decrease. Adjust the Hop Up so BBs travel horizontally.

Too much Hop Up (Turn COUNTERCLOCKWISE to lose Hop Up)

BEST POSITION

Not enough Hop Up (Turn CLOCKWISE to increase Hop Up)

Or,Too much Hop Up (Turn COUNTERCLOCKWISE to lose Hop Up)

5
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

F Disassemble
1. Push the take down lever. 2. Separate the upper and lower body.

6
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

G Maintenance
G-01 Magazine upkeep G-02 Gun body upkeep

1. The O-ring at the magazine gas outlet 1. Lightly lubricate the moving parts of the
and interior must be lubricated slightly trigger mechanism with silicone oil.
with silicone oil.

2. Lubricate similarly the gas outlet valve. G-03 Action upkeep

1. Pull out the nozzle to see the O-ring

in the blowback housing. 1

2. Slightly lubricate the O-ring

3. Slightly spray silicone oil into gas
with silicone oil.
charging valve.

7
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

H Explosion
Diagram

!$
!%

!#

!"

!&
01 BARREL-RECEIVER GROUP
02 BOLT GROUP
03 STOCK GROUP
04 BUTT STOCK GROUP
05 GAS/CO2 MAGAZINE
8
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

H Explosion
Diagram 01 BARREL-RECEIVER GROUP

"%

" "!

"&

&

"& &
'
"#
&

$ #

""
"#
)
*
01-1 Receiver complete 01-8 Hop up bucking
01-2 Picatinny rail 01-9 Hop up chamber
01-3 Screw M3×5 (3 pcs) 01-10 Hop up adjustment set
01-4 Outer barrel set 01-11 150mm inner barrel
01-5 Front sight set 01-12 Chamber screw M1.4×10 (2 pcs)
01-6 Flash hider 01-13 Set screw M3×3 (2 pcs)
01-7 Set screw M3×2 01-14 Combine pin (3 pcs) 9
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

H Explosion
Diagram 02 BOLT GROUP
"#

"$

&

""
"&
$ "%
# (
"
'

*
") )
%

"!

02-1 Spring guide set 02-7 Flute valve set 02-13 Screw M2×12 (2 pcs)
02-2 Recoil spring 02-8 Combin bridge 02-14 E-clip
02-3 Bolt carrier 02-9 Bolt-nozzle connect SUB-ASSY 02-15 Set screw M3×3 (2 pcs)
02-4 Loading nozzle assembly 02-10 Charging handle set 02-16 O-ring
02-5 O-ring 02-11 Positive stop
10 02-6 Connecting pin (2 pcs) 02-12 O-ring
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

03-1 Stock
03-2 Hammer chassis
H Explosion
Diagram STOCK GROUP
03-3
03-4
03-5
Knocker set
Sear set
Hammer
03-6 Sleeve bearing
%!
03-7 Hammer sturt pin (2 pcs)
%"
03-8 Hammer lock
&&
&# 03-9 Trigger bar
03-10 Sear spring
&% 03-11 Hammer lock spring
%(
03-12 Trigger
%'
&!
03-13 Hammer spring
"' 03-14 Screw M3×5 (2 pcs)
03-15 Set screw M3×3 (2 pcs)
%#
"( 03-16 Screw M2×5
$
%*
03-17 Take down lever with spring
03-18 Spring
"&
' 03-19 Stock release
" %% & 03-20 Buffer
&" ""
) 03-21 Buffer spring
&$
%& 03-22 Pin
#
"#
% 03-23 Pin
03-24 Magazine release
"! 03-25 Release spring
%) "$
"# 03-26 Pin
*
03-27 Sling swivel
03-28 Sling lock washer
%$ "%
( 03-29 Stock lock washer
03-30 Set screw M3×18
"* ") 03-31 Fire Selector with washer
03-32 Fire selector lever
03-33 Screw M2×5
03-34 Screw M4×10
03-35 Pin 11
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

H Explosion
Diagram 04 BUTT STOCK GROUP 05 GAS/CO2 MAGAZINE
Gas CO2
% * ") '

" # "% "& "#

"* (

& "'

$ %

$ "$
"!
"
) ""

#
04-1 Folding base 05-1 Gas body magazine 05-10 Magazine floor
04-2 Butt Stock 05-2 Bottom magazine 05-11 Magazine base pad
04-3 Combine screw 05-3 Regulator pipe 05-12 CO2 body magazine
&
04-4 Spring 05-4 Magazine seal pad 05-13 Modify CO2 Valve
04-5 Folding axle 05-5 Injection valve 05-14 Koba CO2 Valve
05-6 Screw M2.5×8 (3 pcs) 05-15 Capsule fixed screw
05-7 Gas valve 05-16 Feeding lip
05-8 Magazine follower 05-17 Magazine lip seal
05-9 Follower spring 05-18 Pin (2 pcs)
12
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

I Trouble Shooting
1. In case of BB clogging, pull out the magazine and then pull the charging handle. Continue operation after a BB falls out.

2. Check for gas leakage in the magazine before operation.

3. Gas leakage compromises overall efficiency. Consult a gunsmith or expert in case of gas leakage.

4. Clean regularly the barrel with cleaning rod to avoid BB clogging and upkeep shooting accuracy.

J Notice and Warning

14KG

DO NOT use recycled or DO NOT use high-pressure NEVER aim guns at people. DO NOT shoot small animals.
low-qualityBBs to avoid clogging (kg-rated) gas tanks to avoid
and damage to barrel. damage to gun parts.

DO NOT look into barrels. Never disassemble or modify ALWAYS make sure safety is ON ALWAYS carry guns in cases
the airsoft gun it may cause
the trouble and dangerous.
when not using guns. to avoid risky open carry.
13
GAS BLOW BACK

PP-2K
AIRSOFT SUBMACHI NE G UN

INSTRUCTION MANUAL (Chinese)

[PP-2K] Join Modify Airsoft
How-To Owners Group
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

A 各部名稱
Component name
板機 槍背帶環
Trigger Sling Swivel
槍機拉柄
Charging Handle
後托釋放鈕
Stock Release

防火帽 鋼製後托
Butt Stock
Flash Hider

槍管卡榫 彈匣釋放鈕 射擊選擇鈕

Take down lever
Magazine Release Fire Selector

HOP調節
Hop Up Adjustment

彈匣 PP-2K PP-2K CO2

Magazine
( ) 1.3 1.3
( ) 370 mm 370 mm
( ) 590 mm 590 mm
150 mm 150 mm
6.03 mm 6.03 mm
22 22
/ / / /
6 mm BB 6 mm BB
260-310 fps (80-95 m/s) 280-310 fps(85-95 m/s)
(2 )
295-330 fps (90-100 m/s) 360-395 fps(110-120 m/s)
20~25°C 68~77°F 20~25°C 68~77°F 1
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

B 彈匣使用方式
Magazine attachment

B-01 BB B-02 / CO2 B-03

1. 1. 1. 1.

2.
2.

1
:

( )

2
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

C 可動部件說明
Operation

C-01 後托展開與收起 C-02 後托拆卸與更換 C-03 戰術燈筒安裝與拆卸

1
1. 1.
1

1. 2.

2 1

1. 1 1.
2
2.
1 2.

3
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

D 可動部件說明 Fire

D-01 D-02 D-03

2
1. 1. Safety
2.
Safety

Full-Auto

3. Safety

Semi-Auto

: :

4
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

E 彈道調整
HOP UP Adjustment

E-01 HOP調整方式 E-02

mm BB
BB
BB

Too much Hop Up (Turn COUNTERCLOCKWISE to lose Hop Up)

BEST POSITION

Not enough Hop Up (Turn CLOCKWISE to increase Hop Up)

Or,Too much Hop Up (Turn COUNTERCLOCKWISE to lose Hop Up)

5
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

F 大部分解
Disassemble

1. 2.

6
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

G 保養
Maintenance

G-01 G-02 槍身保養

1. 彈匣出氣口橡皮及內部O環 1. 板機內構作動件噴上少許矽油。
噴上少許矽油

2. 出氣閥處噴上少許矽油。 G-03 槍機保養

1. 將飛機拉出後，會看到飛機後方O環。
1

2. 對此O環噴上少許矽油。
3. 灌氣嘴處噴上少許矽油。

7
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

H 爆炸圖
Explosion Drawing

05
02

04

01

01
02
03
04
05 /CO2
8
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

H 爆炸圖
Explosion Drawing
01

12

1 10

13

13 3
'
14
3

5 4

11
14
6
7
01-1 01-8 Hop
01-2 01-9 Hop
01-3 M3×5 (3 ) 01-10 Hop
01-4 01-11 150mm
01-5 01-12 Hop M1.4×10 (2 )
01-6 01-13 M3×3 (2 )
01-7 M3×2 01-14 (3 ) 9
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

H 爆炸圖
Explosion Drawing
02
"#

"$

&

""
"&
$ "%
# (
"
'

*
") )
%

"!

02-1 02-7 02-13 (2 )

02-2 PP-2K 02-8 02-14 E
02-3 02-9 - 02-15 M3×3 (2 )
02-4 02-10 02-16 O
02-5 O 02-11
10 02-6 (2 ) 02-12 O
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

03-1
03-2
H 爆炸圖
Explosion Drawing
03-3
03-4
03-5
03-6
%!
03-7 (2 )
%"
03-8
&&
&# 03-9
03-10
&% 03-11
%(
03-12
%'
&!
03-13
"' 03-14 M3×5 (2 )
03-15 M3×3 (2 )
%#
"( 03-16 M2×5
$
%*
03-17
03-18
"&
' 03-19
" %% & 03-20
&" ""
) 03-21
&$
%& 03-22
#
"#
% 03-23
03-24
"! 03-25
%) "$
"# 03-26
*
03-27
03-28
%$ "%
( 03-29
03-30 M3×18
"* ") 03-31
03-32
03-33 M2×5
03-34 M4×10
03-35
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

H 爆炸圖
Explosion Drawing
04 05 /CO2
Gas CO2
% * ") '

" # "% "& "#

"* (

& "'

$ %

$ "$
"!
"
) ""

#
04-1 05-1 05-10
04-2 05-2 05-11
04-3 05-3 05-12 CO2
&
04-4 05-4 05-13 Modify CO2
04-5 05-5 05-14 Koba CO2
05-6 M2.5×8 (3 ) 05-15 CO2
05-7 05-16
05-8 05-17
05-9 130mm 05-18 (2 )
12
 GBB
GAS/CO2
-UP
HADOJUPSTABLE 1:1
SCALE STEEL PARTS

INSTRUCTION MANUAL

I 狀況排除
Trouble Shooting

1. 如發現有卡彈的情形，應卸除彈匣並重拉槍機。確認卡彈的BB彈掉出後，再繼續使用。

2. 使用前請確認彈匣是否有出現漏氣現象。

3. 若出現漏氣現象，會出現效能損失。應交給專業人士協助處理。

4. 請定期使用通槍條清潔槍管，以保持槍支射擊時的精準性及減少卡彈的情形發生。

J 警告與注意事項
Notice and Warning

14KG

DO NOT use recycled or DO NOT use high-pressure NEVER aim guns at people. DO NOT shoot small animals.
low-qualityBBs to avoid clogging (kg-rated) gas tanks to avoid
and damage to barrel. damage to gun parts.

DO NOT look into barrels. Never disassemble or modify ALWAYS make sure safety is ON ALWAYS carry guns in cases
the airsoft gun it may cause
the trouble and dangerous.
when not using guns. to avoid risky open carry.
13
GAS BLOW BACK

PP-2K
AIRSOFT SUBM A CHINE G UN

Contact us

334015 Website FaceBook