Sartorius Cubis® Series

Laboratory balances

MODULAR
DESIGN

General Specifications
Power supply 100–240 V~, –15 %/+10 %, 50–60 Hz, 1.0 A
Input voltage 15 VDC, ± 5 %
Power consumption 7W (max.)
Ambient temperature Operation +5°C to +40°C
Highest relative humidity 80 % for temperatures up to 31°C, decreasing linearly to 50 % relative humidity for 40°C
Safety of electrical equipment According to EN 61010-1:2001: Safety requirements for electrical equipment for measurement,
control, and laboratory use – Part 1: General requirements
Electromagnetic compatibility According to EN 61326-1:2006: Electrical equipment for measurement, control, and laboratory use –
EMC requirements – Part 1: General requirements
Defined immunity to interference Suitable for use in industrial areas
Interference emission Class B (suitable for use in residential areas and areas that are connected to a low voltage network
that also supplies residential buildings)
Cubis® Display and Control Units

Type MSA MSU MSE

Operation Touch screen, keys for central basic Keys Keys
functions
Display High-resolution color TFT, High-resolution black-and-white, Liquid crystal display, black-and-
5.7" graphic display 5.7" graphical display white
Adaptation of the Tiltable display, removable display and control unit Removable display and control unit
display and control unit
Standard data interfaces – USB (integrated into weighing module) – USB (integrated into weighing
– RS-232C accessory interface, 25-pin (integrated into weighing module) module)
– Various data protocols available (can also be connected to software – RS-232C accessory interface,
designed for external manufacturers) 25-pin (integrated into weighing
– Ethernet (integrated into display unit) module)
SD card reader Integrated as standard into display and control unit –
Operation of the motorized Activated by side keys or touch-free using Activated by key or touch-free
draft shield (only for DA, DI, IR switch (optional); learning capability using IR switch (optional); learning
DM draft shields) capability
Applications Unit conversion, SQmin function for minimum initial weight according Unit conversion, isoCAL automatic
to USP, isoCAL automatic calibration | adjustment function, individual calibration | adjustment function,
identifiers, density determination, statistics, calculations, averaging, density determination (buoyancy
formulation, weighing in percent, time-controlled functions, totalizing, DKD method only), calculations,
measurement uncertainty, second tare memory, counting, checkweighing, averaging, net | total formulation,
alibi memory, audit trail weighing in percent, counting,
totalizing

Cubis® Weighing Modules

Ultramicrobalances 0.0001 mg
Model 2.7S 2.7S (with DF filter draft shield)
Readability mg 0.0001 0.0001
Weighing capacity g 2.1 2.1
Tare range (subtractive) g – 2.1 – 2.1
Repeatability <±mg 0.00025 0.00025
Linearity <±mg 0.0009 0.0009
Corner load (test load [g]) mg 0.0025 (1) 0.0025 (1)
Optimal starting point of the operating range* mg 0.082 –
Sensitivity drift between +10 to +30°C ±ppm/K 1 1
Typical stabilization time s <7 <7
Typical measurement time s < 10 < 10
External standard calibration value g 2 (E2) 2 (E2)
(min. accuracy class)
Display result s 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size d mm 20 50
Weighing chamber height mm 70 15
Protection Protected against dust and water

* = According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.

2
Microbalances 0.001 mg
Model 6.6S 6.6S (with DF filter 3.6P
draft shield)
Readability mg 0.001 0.001 0.001 | 0.002 | 0.005
Weighing capacity g 6.1 6.1 1.1 | 2.1 | 3.1
Tare range (subtractive) g – 6.1 – 6.1 – 3.1
Repeatability <±mg 0.001 0.001 0.003 | 0.004 | 0.005
Linearity <±mg 0.004 0.004 0.004
Corner load (test load [g]) mg 0.004 (2) 0.004 (2)** 0.005 (1)
Optimal starting point of the mg 0.82 – 0.82
operating range*
Sensitivity drift between +10 to +30°C ±ppm/K 1 1 1
Typical stabilization time s <5 <5 <5
Typical measurement time s <8 <8 <8
External standard calibration value g 5 (E2) 5 (E2) 3 (E2)
(min. accuracy class)
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size d mm 30 50 30
Weighing chamber height mm 70 15 70
Protection Protected against dust and water

Semi-microbalances 0.01 mg
Model 225S 225P 125P
Readability mg 0.01 0.01 | 0.02 | 0.05 0.01 | 0.1
Weighing capacity g 220 60 | 120 | 220 60 | 120
Tare range (subtractive) g – 220 – 220 – 120
Repeatability <±mg 0…60 g: 0.015 0…60 g: 0.015 0…60 g: 0.015
60…220 g: 0.025 60…220 g: 0.04 60…120 g: 0.06
Linearity <±mg 0.1 0.15 0.15
Corner load (test load [g]) mg 0.15 (100) 0.2 (100) 0.15 (50)
Optimal starting point of the mg 8.2 8.2 8.2
operating range*
Sensitivity drift between +10 to +30°C ±ppm/K 1 1 1
Typical stabilization time s <2 <2 <2
Typical measurement time s <6 <6 <6
External standard calibration value g 200 (E2) 200 (E2) 100 (E2)
(min. accuracy class)
Display result s 0.2 – 0.4 0.2 – 0.4 0.2 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 85 + 85 85 + 85 85 + 85
Weighing chamber height (draft shield DU) mm 261 261 261
Protection Protected against dust and water

* = According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.
** = Measured using a standard pan

3
Analytical Balances 0.1 mg
Model 524S 524P 324S 324P 224S 124S
Readability mg 0.1 0.1 | 0.2 | 0.5 0.1 0.1 | 0.2 | 0.5 0.1 0.1
Weighing capacity g 520 120 | 240 | 520 320 80 | 160 | 320 220 120
Tare range (subtractive) g – 520 – 520 – 320 – 320 – 220 – 120
Repeatability <±mg 0.1 0.15 | 0.2 | 0.4 0.1 0.1 | 0.2 | 0.4 0.07 0.1
Linearity <±mg 0.4 0.5 0.3 0.5 0.2 0.2
Corner load (test load [g]) mg 0.3 (200) 0.4 (200) 0.3 (200) 0.4 (200) 0.2 (100) 0.2 (50)
Optimal starting point of the mg 82 82 82 82 82 82
operating range*
Sensitivity drift between +10 to +30°C ±ppm/K 1 1 1 1 1 1
Typical stabilization time s <1 <1 <1 <1 <1 <1
Typical measurement time s <3 <3 <3 <3 <3 <3
External standard calibration value g 500 500 200+100 200+100 200 (E2) 100 (E2)
(min. accuracy class) (E2) (E2)
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 85 + 85 85 + 85 85 + 85 85 + 85 85 + 85 85 + 85
Weighing chamber height (draft shield DU) mm 261 261 261 261 261 261
Protection IP54 in accordance with IEC 60529

Precision Balances
Model 5203S 5203P 3203S 2203S 2203P 1203S
Readability mg 1 1|2|5 1 1 1 | 10 1
Weighing capacity g 5,200 1,200 | 2,400 | 3,200 2,200 1,010 | 2,200 1,200
5,200
Tare range (subtractive) g - 5,200 - 5,200 – 3,200 – 2,200 – 2,200 – 1,200
Repeatability <±mg 1 1 1 1 1|6 0.7
Linearity <±mg 5 5 5 3 5 2
Corner load (test load [g]) mg 2 (2,000) 2 (2,000) 2 (1,000) 2 (1,000) 3 (1,000) 2 (500)
Optimal starting point of the g 0.82 0.82 0.82 0.82 0.82 0.82
operating range*
Sensitivity drift between +10 to +30°C ±ppm/K 1 1 1 1 1 1.5
Typical stabilization time s <1 <1 <1 <1 <1 <1
Typical measurement time s <2 <2 <2 < 1.5 < 1.5 < 1.5
External standard calibration value g 5,000 5,000 2,000 2,000 (E2) 1,000 (E2) 1,000 (E2)
(min. accuracy class)
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 140 + 140 140 + 140 140 + 140 140 + 140 140 + 140 140 + 140
Weighing chamber height (draft shield DE) mm 172 172 172 172 172 172
Protection Protected against dust and water

* = According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.

4
Precision Balances
Model 623S 623P 323S
Readability mg 1 1|2|5 1
Weighing capacity g 620 150 | 300 | 620 320
Tare range (subtractive) g – 620 – 620 – 320
Repeatability <±mg 0.7 1|2|4 0.7
Linearity <±mg 2 5 2
Corner load (test load [g]) mg 2 (200) 4 (200) 2 (200)
Optimal starting point of the g 0.82 0.82 0.82
operating range*
Sensitivity drift between +10 to +30°C ±ppm/K 2 2 2
Typical stabilization time s < 0.8 < 0.8 < 0.8
Typical measurement time s <1 <1 <1
External standard calibration value g 500 (E2) 500 (F1) 200 (E2)
(min. accuracy class)
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 140 + 140 140 + 140 140 + 140
Weighing chamber height (draft shield DE) mm 172 172 172
Protection Protected against dust and water

Model 14202S 14202P 10202S 8202S

Readability mg 10 10 | 20 | 50 10 10
Weighing capacity g 14,200 3,500 | 7,000 | 14,200 10,200 8,200
Tare range (subtractive) g - 14,200 - 14,200 – 10,200 – 8,200
Repeatability <±mg 10 10 | 20 | 40 7 7
Linearity <±mg 30 50 20 20
Corner load (test load [g]) mg 20 (5,000) 40 (5,000) 20 (5,000) 20 (5,000)
Optimal starting point of the g 8.2 8.2 8.2 8.2
operating range*
Sensitivity drift between +10 to +30°C ±ppm/K 1.5 1.5 2 2
Typical stabilization time s 1 1 1 1
Typical measurement time s < 1.5 < 1.5 < 1.5 < 1.5
External standard calibration value kg 10 (E2) 10 (E2) 10 (E2) 5 (E2)
(min. accuracy class)
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 206 + 206 206 + 206 206 + 206 206 + 206
Protection IP54 in accordance with IEC 60529

* = According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.

5
Precision Balances
Model 6202S 6202P 5202S 4202S
Readability mg 10 10 | 20 | 50 10 10
Weighing capacity g 6,200 1,500 | 3,000 | 6,200 5,200 4,200
Tare range (subtractive) g – 6,200 – 6,200 - 5,200 – 4,200
Repeatability <±mg 7 7 | 20 | 40 6 7
Linearity <±mg 20 50 10 20
Corner load (test load [g]) mg 20 (2,000) 50 (2,000) 10 (2,000) 30 (2,000)
Optimal starting point of the g 8.2 8.2 8.2 8.2
operating range*
Sensitivity drift between +10 to +30°C ±ppm/K 2 2 2 2
Typical stabilization time s 1 1 0.8 0.8
Typical measurement time s < 1.5 < 1.5 <1 <1
External standard calibration value kg 5 (E2) 5 (F1) 5 2 (E2)
(min. accuracy class)
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 206 + 206 206 + 206 140 + 140 206 + 206
Protection IP54 in accordance with IEC 60529

Model 2202S 1202S 12201S 8201S 5201S

Readability mg 10 10 100 100 100
Weighing capacity g 2,200 1,200 12,200 8,200 5,200
Tare range (subtractive) g – 2,200 – 1,200 – 12,200 – 8,200 – 5,200
Repeatability <±mg 7 7 50 50 50
Linearity <±mg 20 20 100 100 100
Corner load (test load [g]) mg 20 (1,000) 20 (500) 200 (5,000) 200 (5,000) 200 (2,000)
Optimal starting point of the g 8.2 8.2 82 82 82
operating range*
Sensitivity drift between +10 to +30°C ±ppm/K 2 2 4 4 4
Typical stabilization time s 0.8 0.8 0.8 0.8 0.8
Typical measurement time s <1 <1 <1 <1 <1
External standard calibration value kg 2 (F1) 1 (F1) 10 (F1) 5 (F2) 5 (F2)
(min. accuracy class)
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 206 + 206 206 + 206 206 + 206 206 + 206 206 + 206
Protection IP54 in accordance with IEC 60529

* = According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.

6
Precision High Capacity Balances
Model 70201S 36201S 36201P 20201S
Readability mg 100 100 100 | 1,000 100
Weighing capacity g 70,200 36,200 10,200 | 36,200 20,200
Tare range (subtractive) g – 70,200 – 36,200 - 36,200 – 20,200
Repeatability <±mg 100 100 100 | 500 100
Linearity <±mg 500 200 200 200
Corner load (test load [g]) mg 500 (20,000) 300 (10,000) 300 (10,000) 300 (5,000)
Optimal starting point of the g 82 82 82 82
operating range*
Sensitivity drift between +10 to +30°C ±ppm/K 3 2 2 2
Typical measurement time s 1.5 1.5 1.5 1.5
External standard calibration value kg 20 (F1) 10 (F1) 10 (F1) 10 (F1)
(min. accuracy class)
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 400 + 300 400 + 300 400 + 300 400 + 300
Protection IP54 in accordance with IEC 60529

Model 70200S 36200S

Readability mg 1,000 1,000
Weighing capacity g 70,200 36,200
Tare range (subtractive) g – 70,200 – 36,200
Repeatability <±mg 500 500
Linearity <±mg 1,000 1,000
Corner load (test load [g]) mg 1,000 (20,000) 1,000 (10,000)
Optimal starting point of the g 820 820
operating range*
Sensitivity drift between +10 to +30°C ±ppm/K 2 3
Typical measurement time s 1 1
External standard calibration value kg 20 (F1) 10 (F1)
(min. accuracy class)
Display result s 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 400 + 300 400 + 300
Protection IP54 in accordance with IEC 60529

* = According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.

7
Verified Models with EC Type Approval Certificate: Micro- and Ultramicrobalances
Model 6.6S-xCE 2.7S-xCE 3.6P-xCE
Accuracy class* mg k k k
For verified models: EC type approval certificate D09-09-015, Type: MSX
Scale interval d* mg 0.001 0.0001 0.001
Weighing capacity max* g 6.1 2.1 3.1
Calibration value e* mg 1 1 1
Min. load min* mg 0.1 0.01 0.1
Tare equalization range (subtractive) g < 100 % from max. weighing capacity
Application range according to DIR* g 0.001 – 6.1 0.001 – 2.1 0.001 – 3.1
Optimal starting point of the operating range** mg 0.82 0.082 0.82
Typical stabilization time s <5 <7 <5
Typical measurement time s <8 < 10 <8
External standard calibration value g 5 2 3
(min. accuracy class)
Application range (temperature) With “isoCAL” function: +5…+40°C | Without “isoCAL” function: +15 … +25°C
Display result s By selection of 1 of 4 optimized filter levels
(depending on the set filter level)
Weighing pan size d mm 30 20 30
Weighing chamber height mm 70 70 70
(draft shield DM)
Protection Protected against dust and water

Verified Models with EC Type Approval Certificate: Semi-microbalances 0.01 mg

Model 225S-xCE 225P-xCE 125P-xCE
Accuracy class* mg k k k
For verified models: EC type approval certificate D09-09-015, Type: MSX
Scale interval d* mg 0.01 0.01 | 0.02 | 0.05 0.01 | 0.1
Weighing capacity max* g 220 60 | 120 | 220 60 | 120
Calibration value e* mg 1 1 1
Min. load min* mg 1 1 1
Tare equalization range (subtractive) < 100 % from max. weighing capacity
Application range according to DIR* g 0.001 – 220 0.001 – 220 0.001 – 120
Optimal starting point of the operating range** mg 8.2 8.2 8.2
Typical stabilization time s <2 <2 <2
Typical measurement time s <6 <6 <6
External standard calibration value g 200 (E2) 200 (E2) 100 (E2)
(min. accuracy class)
Application range (temperature) With “isoCAL” function: +5 … +40°C | Without “isoCAL” function: +15 … +25°C
Adaptation to ambient conditions By selection of 1 of 4 optimized filter levels
Display result s 0.2 – 0.4 0.2 – 0.4 0.2 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 85 + 85 85 + 85 85 + 85
Weighing chamber height (draft shield DU) mm 261 261 261
Protection Protected against dust and water

* DIR = Directive 90/384/EEC on non-automatic weighing instruments used within the European Economic Area
** = According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.

8
Verified Models with EC Type Approval Certificate: Analytical Balances 0.1 mg
Model 524S-xCE 524P-xCE 324S-xCE 224S-xCE 324P-xCE 124S-xCE
Accuracy class* k k k k k k
For verified models: EC type approval certificate D09-09-015, Type: MSX
Scale interval d* mg 0.1 0.1 | 0.2 | 0.5 0.1 0.1 0.1 | 0.2 | 0.5 0.1
Weighing capacity max* g 520 120 | 240 | 520 320 220 80 | 160 | 320 120
Calibration value e* mg 1 1 1 1 1 1
Min. load min* mg 10 10 10 10 10 10
Tare equalization range (subtractive) g < 100 % from max. weighing capacity
Application range according to DIR* g 0.01–520 0.01–520 0.01–320 0.01–220 0.01–320 0.01–120
Optimal starting point of the mg 82 82 82 82 82 82
operating range**
Typical stabilization time s <1 <1 <1 <1 <1 <1
Typical measurement time s <3 <3 <3 <3 <3 <3
External standard calibration value g 500 500 200+100 200 200+100 100
(min. accuracy class) (E2) (E2) (E2) (E2)
Application range (temperature) With “isoCAL” function: +5 … +40°C | Without “isoCAL” function: +15 … +25°C
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 85 + 85 85 + 85 85 + 85 85 + 85 85 + 85 85 + 85
Weighing chamber height (draft shield DU) mm 261 261 261 261 261 261
Protection IP54 in accordance with IEC 60529

Verified Models with EC Type Approval Certificate: Precision Balances

Model 5203S-xCE 5203P-xCE 3203S-xCE 2203S-xCE 2203P-xCE 1203S-xCE
Accuracy class* k k k k k k
For verified models: EC type approval certificate D09-09-015, Type: MSX
Scale interval d* mg 1 1|2|5 1 1 1 | 10 1
Weighing capacity max* g 5,200 1,200 | 2,400 | 3,200 2,200 1,010 | 2,200 1,200
5,200
Calibration value e* mg 10 10 10 10 10 10
Min. load min* mg 100 100 100 100 100 100
Tare equalization range (subtractive) g < 100 % from max. weighing capacity
Application range according to DIR* g 0,1 – 5,200 0,1 – 5,200 0,1 – 3,200 0,1 – 2,200 0,1 – 2,200 0,1 – 1,200
Optimal starting point of the g 0.82 0.82 0.82 0.82 0.82 0.82
operating range**
Typical stabilization time s <1 <1 <1 <1 <1 <1
Typical measurement time s <2 <2 <2 < 1.5 < 1.5 < 1.5
External standard calibration value g 5,000 5,000 2,000 2,000 (E2) 1,000 (E2) 1,000 (E2)
(min. accuracy class)
Application range (temperature) With “isoCAL” function: +5 to +40°C | Without “isoCAL” function: +15 to +25°C
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 140 + 140 140 + 140 140 + 140 140 + 140 140 + 140 140 + 140
Weighing chamber height (draft shield DE) mm 172 172 172 172 172 172
Protection Protected against dust and water

* DIR = Directive 90/384/EEC on non-automatic weighing instruments used within the European Economic Area
** = According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.
9
Verified Models with EC Type Approval Certificate: Precision Balances
Model 623S-xCE 623P-xCE 323S-xCE
Accuracy class* mg K K K
For verified models: EC type approval certificate D09-09-015, Type: MSX
Scale interval d* mg 1 1|2|5 1
Weighing capacity max* g 620 150 | 300 | 620 320
Calibration value e* mg 10 10 10
Min. load min* mg 20 20 20
Tare equalization range (subtractive) < 100 % from max. weighing capacity
Application range according to DIR* g 0.02 – 620 0.02 – 620 0.02 – 320
Optimal starting point of the g 0.82 0.82 0.82
operating range**
Typical stabilization time s < 0.8 < 0.8 < 0.8
Typical measurement time s <1 <1 <1
Application range (temperature) With “isoCAL” function: +5 … +40°C | Without “isoCAL” function: +10 … +30°C
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 140 + 140 140 + 140 140 + 140
Weighing chamber height (draft shield DE) mm 172 172 172
Protection Protected against dust and water

Model 14202S-xCE 14202P-xCE 10202S-xCE 8202S-xCE

Accuracy class* k k k K
For verified models: EC type approval certificate D09-09-015, Type: MSX
Scale interval d* g 0.01 0.01 | 0.02 | 0.05 0.01 0.01
Weighing capacity max* g 14,200 3,500 | 7,000 | 14,200 10,200 8,200
Calibration value e* g 0.1 0.1 0.1 0.1
Min. load min* g 1 1 1 0.5
Tare equalization range (subtractive) < 100 % from max. weighing capacity
Application range according to DIR* g 1 – 14,200 1 – 14,200 1 – 10,200 0,5 – 8,200
Optimal starting point of the g 8.2 8.2 8.2 8.2
operating range**
Typical measurement time s < 1.5 < 1.5 < 1.5 < 1.5
Application range (temperature):
With “isoCAL” function +5 … +40°C +5 … +40°C +5 … +40°C +5 … +40°C
Without “isoCAL” function +15 … +25°C +15 … +25°C +15 … +25°C +10 … +30°C
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 206 + 206 206 + 206 206 + 206 206 + 206
Protection IP54 in accordance with IEC 60529

* DIR = Directive 90/384/EEC on non-automatic weighing instruments used within the European Economic Area
** = According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.

10
Verified Models with EC Type Approval Certificate: Precision Balances
Model 6202S-xCE 6202P-xCE 5202S-xCE 4202S-xCE
Accuracy class* K K k K
For verified models: EC type approval certificate D09-09-015. Type: MSX
Scale interval d* g 0.01 0.01 | 0.02 | 0.05 0.01 0.01
Weighing capacity max* g 6,200 1,500 | 3,000 | 6,200 5,200 4,200
Calibration value e* g 0.1 0.1 0.1 0.1
Min. load min* g 0.5 0.5 1 0.5
Tare equalization range (subtractive) < 100 % from max. weighing capacity
Application range according to DIR* g 0.5 – 6,200 0.5 – 6,200 1 – 5,200 0.5 – 4,200
Optimal starting point of the g 8.2 8.2 8.2 8.2
operating range**
Typical stabilization time s <1 <1 < 0.8 < 0.8
Typical measurement time s < 1.5 < 1.5 <1 <1
Application range (temperature):
With “isoCAL” function +5 … +40°C +5 … +40°C +5 … +40°C
Without “isoCAL” function +10 … +30°C +10 … +30°C +10 … +30°C
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 206 + 206 206 + 206 206 + 206 206 + 206
Protection IP54 in accordance with IEC 60529

Model 2202S-xCE 1202S-xCE 12201S-xCE 8201S-xCE 5201S-xCE

Accuracy class* K K K K K
For verified models: EC type approval certificate D09-09-015, Type: MSX
Scale interval d* mg 10 10 100 100 100
Weighing capacity max* g 2,200 1,200 12,200 8,200 5,200
Calibration value e* g 0.1 0.1 1 1 1
Min. load min* g 0.5 0.5 5 5 5
Tare equalization range (subtractive) < 100 % from max. weighing capacity
Application range according to DIR* g 0.5 – 2,200 0.5 – 1,200 5 – 12,200 5 – 8,200 5 – 5,200
Optimal starting point of the g 8.2 8.2 82 82 82
operating range**
Typical stabilization time s < 0.8 < 0.8 < 0.8 < 0.8 < 0.8
Typical measurement time s <1 <1 <1 <1 <1
External standard calibration value kg 2 (F1) 1 (F1) 10 (F1) 5 (F2) 5 (F2)
(min. accuracy class)
Application range (temperature) With “isoCAL” function: +5 … +40°C | Without “isoCAL” function: +10 … +30°C
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 206 + 206 206 + 206 206 + 206 206 + 206 206 + 206
Protection IP54 in accordance with IEC 60529

* DIR = Directive 90/384/EEC on non-automatic weighing instruments used within the European Economic Area
** = According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.

11
Verified models with EC Type Approval Certificate: High load balances
Modelle 36201S-0CE 36201P-0CE 20201S-0CE
Accuracy class* K K K
For verified models: EC Type-Approval Certificate D09-09-015, Type: MSX
Scale interval d* mg 100 100 | 1.000 100
Weighing capacity max* g 36,200 10,200 | 36,200 20,200
Calibration value e* g 1 1 1
Min. load min* g 5 5 5
Tare equalization range (subtractive) < 100% from max. weighing capacity
Application range according to DIR* g 5 – 36,200 5 – 36,200 5 – 20,200
Optimal starting point of the g 82 82 82
operating range**
Typical stabilization time s < 1.5 < 1.5 < 1.5
Typical measurement time s <2 <2 <2
Application range (temperature) With “isoCAL” function: +5 to +40 °C | Without “isoCAL” function: +10 to +30 °C
Display result s 0.1 – 0.4 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 400 + 300 400 + 300 400 + 300
IP protection IP54

Modelle 70200S-0CE 36200S-0CE

Accuracy class* K K
For verified models: EC Type-Approval Certificate D09-09-015, Type: MSX
Scale interval d* mg 1,000 1,000
Weighing capacity max* g 70,200 36,200
Calibration value e* g 10 1
Min. load min* g 50 50
Tare equalization range (subtractive) < 100% from max. weighing capacity
Application range according to DIR* g 50 – 70,200 50 – 36,200
Optimal starting point of the g 820 820
operating range**
Typical stabilization time s <1 <1
Typical measurement time s < 1.2 < 1.2
Application range (temperature) With “isoCAL” function: +5 to +40 °C | Without “isoCAL” function: +10 to +30 °C
Display result s 0.1 – 0.4 0.1 – 0.4
(depending on the set filter level)
Weighing pan size (W + D) mm 400 + 300 400 + 300
IP protection IP54

* DIR = Directive 90/384/EEC on non-automatic weighing instruments used within the European Economic Area
** = According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.

12
Cubis® Leveling
Ø The Cubis® shows the level indicator on the display and provides support for rapid leveling (as standard on the display and service units
MSA and MSU; on the MSE there are only symbols to support manual leveling).
1 Fully automatic, motorized Q-Level leveling at the touch of a button (available for all Cubis® weighing modules with a weighing capacity
of > 6.1 g and < 6200 g).

Test Certificates and Permits

ØØ Standard certificate of conformity to specifications
TR Like ØØ, but with a detailed test protocol
CE Factory-calibrated with European calibration permit (not for models with DF draft shield)

Cubis® Draft Shields

DØ Flat, stainless steel weigh pan with no draft shield for weighing modules with a pan size of 206 + 206 mm and 400 + 300 mm.
DE Manual, glass draft shield for precision balances with a readability of 1 mg and weighing module 5202S.
DR Flat, stainless steel weighing pan draft shield (removable, with no glass components) for precision balances with a readability
of 1 mg and weighing module 5202S.
DU Manual, glass analytical balance draft shield with smooth-running, wide-opening doors, unimpeded access to the weighing chamber
without interfering braces. For models with 0.01 mg, 0.1 mg, 1 mg readability and weighing module 5202S.
DA Automatic, glass motorized draft shield with learning capability for ergonomic working and individual adaptation to different applications.
For models with 0.01 mg, 0.1 mg, 1 mg readability and weighing module 5202S.
DI Automatic, glass motorized draft shield with integrated ionizer to eliminate the impact of electrostatic charges in samples | vessels and
learning capability for ergonomic working and individual adaptation to different applications. For models with 0.01 mg, 0.1 mg, 1 mg
readability and weighing module 5202S.
DM Automatic, motorized, round 100% glass draft shield with learning capability for ultra-micro and micro balances with a readability of
0.0001 mg and 0.001 mg (2.7S, 6.6S and 3.6P weighing modules).
DF Manual, stainless steel draft shield for weighing filters with a diameter of up to 50 mm (75 mm and 90 mm pans are optional)
in ultra-micro and micro balances with a readability of 0.0001 mg and 0.001 mg (not for weighing module 3.6P) and also reduces
electrostatic effects.

Optional Interface Modules

IR RS-232 interface, 25-pin
IB Bluetooth® interface
IP RS-232 interface, 9-pin, incl. PS/2 interface

13
Cubis® Optional Accessories

Printers and Communication

Verifiable data printer for connection to RS-232, 25-pin, accessory interface YDP10-0CE
®
Verifiable data printer with Bluetooth data transmission (with YDO01MS-B or IB option only) * YDP10BT-0CE
Color ribbon for YDP10-0CE and YDP10BT-OCE 6906918
Paper rolls for printer YDP10-0CE; 5 rolls 50 m each 6906937
®
Bluetooth data interface for wireless connection of data printer YDP10BT * YDO01MS-B
RS-232C data interface, 9-pin including PS/2 for connecting a PC or keyboard * YDO01MS-P
RS-232C data interface, 25-pin for connection of Cubis® accessories * YDO01MS-R
Display cable 3 m for Cubis® MSA and MSU models for separate setup of display and weighing unit YCC01-MSD3
(installation by Sartorius Service or ex works [order VF4016])
Display cable 3 m for Cubis® MSE models, for separate setup of display and weighing unit YCC01-MSED3
(installation by Sartorius Service or ex works [order VF4016])
Cable 3 m between weighing module and electronics module for Cubis® models YCC01-MSM3
with 0.01 mg | 0.001 mg | 0.0001 mg readability
Installation display cable 3 m for Cubis® models, for separate setup of display and weighing unit VF4016
RS-232C connection cable to connect PC with 9-pin; COM interface, length 1.5 m 7357314
SartoCollect software for data communication between balance and PC YSC02

Displays and Input | Output Elements

MSA control unit with color TFT graphic display and touch screen YAC01MSA
MSE display unit with backlit LC display and tactile keys YAC01MSE
MSU display and control unit with backlit b | w graphic display and tactile navigation keys YAC01MSU
Barcode reader with connection cable, 120 mm reading range YBR03PS2
Foot switch for printing, taring, or using function keys, selection via menu, incl. T connector YFS01
Infrared sensor for touch-free activation of functions (e.g., draft shield control) YHS01MS
Hand switch for printing, taring, or using function keys, selection via menu, incl. T connector YHS02
Foot switch for functions draft shield OPEN  |  CLOSED (in combination with DA and DI draft shields only), tare, and print YPE01RC
Additional display, LCD, figure size 13 mm, backlit YRD03Z
3-segment control display, red – green – red, for plus|minus measurements, incl. T connector YRD11Z

* Not available for Precision high capacity models with a weighing capacity of > 20,200 g.

14
Pipette Calibration Hardware and Software
Pipette calibration kit (hardware) for models with 0.1 mg and 0.01 mg readability YCP04MS
Consists of moisture trap and all required adapters
Pipette calibration kit (hardware) for microbalance weighing modules 6.6S and 3.6P VF988
Consists of moisture trap and all required adapters
Pipette Tracker pipette calibration software. Software and user manual in English only. YCP04-PT
Pipette Tracker Pro pipette calibration software, for use in regulated areas, networkable and validatable, YCP04-PTPro
according to the 21 CFR Part 11 regulations. Software and user manual in English only.
Documentation basis for validation (IQ, OQ) of Pipette Tracker PRO version. YCP04-VTK
All documents are in English only.

Filter Weighing and Antistatic Accessories

Antistatic weighing pan, diameter 130 mm, for weighing modules with a readability of 0.1 mg or 0.01 mg YWP01MS
Filter weighing pan d 75 mm, for ultramicrobalance or microbalance models VF2562
(weighing modules 6.6S, 2.7S; only together with DF draft shield)
Filter weighing pan d 90 mm, for ultramicrobalance or microbalance models VF2880
(weighing modules 6.6S, 2.7S; only together with DF draft shield)
Ionization blower to eliminate electrostatic charges on sample containers and samples YIB01-0DR
Stat-Pen ionization probe for discharging electrostatically charged samples and filters YSTP01

Special Applications
Density determination kit for solids and liquids for weighing modules with a readability of < 1 mg YDK01MS
Density determination kit for solids and liquids for weighing modules with a readability of 1 mg YDK02MS
Q-Grip, flexible holder for weigh-in containers and filters up to 120 mm diameter (replaces the original weighing pan; YFH01MS
for Cubis® models with 0.01 and 0.1 mg readability)
Q-Grid grid weighing pan for Cubis® models with 10 mg or 100 mg readability for weighing in laboratory hoods, safety weighing YWP03MS
cabinets, or workbenches (smaller areas exposed to draft on the weighing pan; replaces the standard weighing pan)

Weighing Tables
Weighing table made from synthetic stone, with vibration dampening YWT03
Wall console YWT04
Weighing table made from wood with synthetic stone for precise, reliable measurements YWT09

Weighing Accessories
Weighing scoop made from chrome nickel steel, 90 + 32 + 8 mm 641214
Aluminum weighing scoop, 4.5 mg (250 pieces) for ultramicrobalance and microbalance models 6565-250
Aluminum weighing scoop, 52 mg (50 pieces) for ultramicrobalance and microbalance models 6566-50
Support arm for 10  | 100 mg precision weighing modules for raising MSE, MSU, and MSA display and control units YDH01MS
Support arm for precision weighing modules with 100 mg | 1 g readability and weighing capacity > 20 kg YDH02MS
for raising MSE, MSU, and MSA display and control units
Hook for below-balance weighing for precision weighing modules with 100 mg | 1 g readability and weighing capacity 69EA0040
> 20 kg (not for verified models, CE mark)

The brand name and logo for Bluetooth® wireless technology are owned by Bluetooth SIG Inc. The use of this brand name and trademark by
Sartorius AG is under license. Other brand names and trademarks are the property of their respective owners.

15
Balance Dimensions
Ultramicrobalance | Microbalance Control Unit MSA | MSU with E-box
All dimensions are given in millimeters

16
Ultramicrobalance | Microbalance Control Unit MSE with E-box
All dimensions are given in millimeters

17
Ultramicrobalance | Microbalance Weighing Module with DM Draft Shield
All dimensions are given in millimeters

18
Ultramicrobalance | Microbalance Weighing Module with DF Draft Shield
All dimensions are given in millimeters

19
Semi-microbalances with Motorized Draft Shield – Control Unit MSA | MSU with E-box
All dimensions are given in millimeters

Draft shield DA | DI interior

dimensions

(H)250 + (W)192 + (D)154

20
Semi-microbalances with Motorized Draft Shield – Control Unit MSE with E-box
All dimensions are given in millimeters

240
206
205

250
373
360

125

91
56

209 211
127 217 240
249

211

Innenmaße Windschutz DA/DI

Draft shield DA
Windshield | DIdimensions
inside interior
dimensions
(H)250 x (B)192 x (T)154
(H)250 + (W)192 + (D)154
240

300 173
404

21
Analytical Balances with Manual DU Draft Shield – Control Unit MSA | MSU
All dimensions are given in millimeters

Draft shield DU interior

dimensions

(H)261 + (W)193 + (D)191

22
Analytical Balances with a Manual DU Draft Shield – Control Unit MSE
All dimensions are given in millimeters

Draft shield DU interior dimensions

(H)261 + (W)193 + (D)191

23
Precision Balances with a Readability of 1 mg and Manual DE Draft Shield – Control Unit MSA | MSU
All dimensions are given in millimeters

Draft shield interior dimensions

(H)172 + (W)193 + (D)191

24
Precision Balances with a Readability of 1 mg and Manual DE Draft Shield – Control Unit MSE
All dimensions are given in millimeters

Draft shield interior dimensions

(H)172 + (W)193 + (D)191

25
Precision Balances with a Readability of 1 mg and Framed DR Draft Shield – Control Unit MSA | MSU
All dimensions are given in millimeters

26
Precision Balances with a Readability of 1 mg and Framed DR Draft Shield – Control Unit MSE
All dimensions are given in millimeters

206 206
154 154

121.5
94
127 217 211
209 240
364 249
105
240

265

27
Precision Balances with No Draft Shield – Control Unit MSA | MSU
All dimensions are given in millimeters

28
Precision Balances with No Draft Shield – Control Unit MSE
All dimensions are given in millimeters

29
Precision High Capacity Balances
All dimensions are given in millimeters

±1
126

365 33 265

400
400
16
16

300

±1
407
±1
455

239.5

239.5

30
Precision High Capacity Balances
All dimensions are given in millimeters

±1
126

365
ca. 390
ca. 370

ca. 350
ca. 600

ca. 595
ca. 327

111 265 100 265

394 383

31
Sartorius Lab Instruments GmbH & Co. KG
Weender Landstrasse 94-108
37075 Goettingen, Germany
Phone +49.551.308.0
Fax +49.551.308.3289
[email protected]
www.sartorius.com
Technical specifications subject to change
without notice.
Printed in the EU on paper bleached without chlorine. | W
Publication No.: W--2025-e140309
Order No.: 98649-011-60
Ver. 03 | 2014