PC

26MR

Mini-Excavator
PC26MR-3
EU Stage V Engine

ENGINE POWER
15,7 kW / 21,1 HP @ 2.500 rpm
OPERATING WEIGHT
2.550 - 2.800 kg
BUCKET CAPACITY
0,035 - 0,085 m³
 Walk-Around
The new PC26MR-3 compact mini-excavator is the result of the competence and technology
that Komatsu has acquired over the past 80 years. It was designed and developed with
constant attention to the needs of customers from all over the world. The end product is a
user-friendly machine with top-class performances.

Cutting-edge hydraulic circuit

• CLSS (Closed-centre Load Sensing System)
• Perfect control even during combined operations
• Fast and precise movements

Total versatility
• Customised configurations
• Standard 1 or 2 way auxiliary line for attachments
• Ideal for a wide range of applications

2
 PC26MR-3
ENGINE POWER
15,7 kW / 21,1 HP @ 2.500 rpm
OPERATING WEIGHT
2.550 - 2.800 kg
First-class operator comfort BUCKET CAPACITY
• Wide entrance for easy entry and exit 0,035 - 0,085 m³
• Spacious working environment
• Pressure Proportional Control (PPC) servo-controls

Outstanding performances
• Low consumption EU Stage V engine
• Optimal power and digging speed
• Superior stability and safety in any conditions
• Automatic down-shift

Easy maintenance
• Quick access to all daily inspection points
• Tilting cab for maintenance jobs
• Extended 500-hour service interval

Komatsu Satellite
Monitoring System

3
Outstanding Performances
Work in tight spaces
The new short-tail PC26MR-3
delivers optimal power and digging
speed, even in confined spaces
where traditional machines can’t
work: yards, road works, demoli-
tion sites, sewers, etc. Sturdy and
very stable, it guarantees maximum
safety and offers complete operator
confidence in any working condi-
tions.

Automatic down-shift
Once turned on, this feature au-
tomatically adjusts the hydraulic
travel motor for the job at hand:
maximum displacement for faster
movement, or minimum displace-
ment for high drawbar pull. This
process requires no attention from
the operator. The two-speed track-
ing is operated via a switch on the
blade lever.

X-frame
The new X-frame ensures maxi-
mum stress resistance and optimal
stress distribution. Its shape makes
the machine a lot more rigid and
reliable. In addition, it facilitates
the regular undercarriage cleaning
operations and the spoils removal
process.

4
 Cutting-Edge Hydraulic Circuit
Komatsu CLSS
The CLSS (Closed-centre Load required movements with maximum
Sensing System) hydraulic circuit efficiency, regardless of the load or
guarantees power, speed and rpm. The unique CLSS characteris-
perfect control to all movements, tics are perfectly complemented by
including simultaneous ones. The the hydraulic servo-controls, which
combination of the variable dis- are, by far, the easiest to use and
placement pump and of CLSS that allow extremely precise ma-
allows operators to perform all noeuvres with minimal effort.

5
First-Class Operator Comfort

An optimal work environment

Designed with the utmost attention
to detail, the operator’s environ-
ment offers outstanding comfort,
accessibility and visibility. The
wide entrance and well placed
handholds allow easy entry and
exit to and from the cab. Once
seated, even the tallest operators
have room to move their legs freely
around the spacious, obstacle-free
floor. For even greater comfort, an
adjustable seat and PPC controls
are fitted as standard.

6
 Total Versatility

Customisation Easy to transport

Many configurations are available, Thanks to its convenient weight,
so you can choose the perfect ma- the new PC26MR-3 can be moved
chine for the job: long or short arm, on a small trailer, with a simple car
cab or canopy, rubber, steel or road driver’s licence. No truck is required
liner shoes. The 1 / 2 way auxiliary to easily transport the machine to a
hydraulic circuit allows the use of jobsite, and back to the yard.
a wide range of working tools such
as a hammer, a clamshell bucket,
an auger etc. The switch between
the two options is simply done by
means of a valve located under
a little bonnet on the side of the
machine.

7
Easy Maintenance
Tilting cab
The wide opening engine bonnets
provide a quick access to daily in-
spection points. In addition, the cab
easily tilts back for major mainte-
nance tasks.

Easier repairs
ORFS hydraulic face seal connec-
tors and DT electrical connectors
enhance the machine’s reliability
and make repairs faster and easier.
Special technical solutions allow
the interval for most ordinary
maintenance operations -
such as pin greasing and
engine oil changes - to be
extended up to 500 hours.

Rear bonnets for quick engine checks, simple inspections, cleaning of the radiators and easy The battery main switch is standard
access to the battery

8
 Komatsu Satellite Monitoring System

KOMTRAX™ is a revolutionary
machine tracking system designed
to save you time and money. You
can now monitor your equipment
anytime and anywhere. Use valua-
ble machine data received via the
Machine working time - With the “daily work- Fleet location - The machine list instantly
KOMTRAX™ web site to optimise ing record” chart, get precise engine running locates all your machines, even those in
your maintenance planning and time data: when your machine was started other countries.
and when it was shut down, as well as total
machine performances. engine running time.

With KOMTRAX™, you can:

• Check when & where your ma-
chines are at work
• Be informed of unauthorized ma-
chine use or movement
• Set and receive e-mail notification
for security alarms

For further details on KOMTRAX™,

please ask your Komatsu dealer for
the latest KOMTRAX™ brochure. Alarm notifications - You can receive notifi- Added security - The “engine lock” feature
cation of alarms both via the KOMTRAX™ allows to program when a machine’s engine
website and by e-mail. can be started. And with “geo-fence”,
KOMTRAX™ sends notification every time
your machine moves in or out of a predeter-
mined operating area.

9
Specifications
ENGINE
SWING SYSTEM
The new generation engine has been developed to comply with the
The rotation is operated by means of an orbital hydraulic motor.
strictest emission controls.
Single ball-bearing ring with internal, induction hardened toothring.
Model........................................................................Komatsu 3D76E
Centralised lubrication of the unit.
Type............................................. emissionised 4-cycle diesel engine
Swing speed........................................................................... 8,9 rpm
Displacement.......................................................................1.115 cm³
Bore × stroke....................................................................76 × 82 mm
No. of cylinders.................................................................................3
Engine power
at rated engine speed..................................................... 2.500 rpm
ISO 14396...........................................................15,7 kW / 21,1 HP BLADE
ISO 9249 (net engine power)..............................15,5 kW / 20,8 HP
Max. torque/engine speed...................................66,7 Nm/1.600 rpm Type........................................... electro-welded, single unit structure
Cooling system........................................................................... water Width × height...........................................................1.500 × 300 mm
Air filter type...................................................................................dry Max. lifting above ground level..............................................350 mm
Starter motor......................................electric motor with pre-heating Max. depth below ground level..............................................300 mm
air system for cold climate

OPERATING WEIGHT
UNDERCARRIAGE
Operating weight with standard bucket, fully serviced, +75 kg
Central lower X-frame and carriage frame with boxed section.
operator (ISO 6016).
Track rollers (each side).....................................................................4
Operating weight with cab and rubber shoes....................... 2.710 kg
Shoe width.............................................................................300 mm
Operating weight with cab and steel shoes.......................... 2.800 kg
Ground pressure (standard)..............................................0,25 kg/cm²
Canopy....................................................................-160 kg (optional)

HYDRAULIC SYSTEM
ELECTRIC SYSTEM
Type............................................................................ Komatsu CLSS
Main pump.......................variable displacement pump + gear pump Voltage..........................................................................................12 V
Max. pump flow......................................................53,9 + 15,2 ltr/min Battery........................................................................................45 Ah
Max. operating pressure...................................... 24,5 MPa (245 bar) Alternator......................................................................................40 A
Hydraulic motors: Starter motor............................................................................1,4 kW
Travel.......................................................2 × variable displacement
Swing.......................................................... 1 × fixed displacement
Hydraulic cylinders (bore × stroke):
Boom.......................................................................70 × 435,5 mm
Arm.............................................................................65 × 451 mm
Bucket.........................................................................55 × 460 mm SERVICE CAPACITIES
Boom swing.............................................................70 × 429,5 mm
Fuel tank......................................................................................28 ltr
Blade...........................................................................70 × 135 mm
Radiator and system..................................................................3,0 ltr
Bucket digging force (ISO 6015)....................... 2.200 daN (2.245 kg)
Engine oil (refill)..........................................................................3,4 ltr
Arm crowd force (ISO 6015):
Hydraulic system.........................................................................30 ltr
1.115 mm arm................................................ 1.400 daN (1.430 kg)
1.370 mm arm................................................ 1.210 daN (1.235 kg)
The digging equipment is fully controlled by PPC servo-controls.
All movements are stopped by lifting the safety levers on the tilting
case.
TRANSMISSION

Type.......................2 speed hydrostatic transmission, controlled and

ENVIRONMENT steered by means of two levers and two pedals
Hydraulic motors.......................................................2 × axial pistons
Engine emissions..............................Fully complies with EU Stage V
Reduction system.........................................................planetary gear
exhaust emission regulations
Max. drawbar pull............................................. 2.600 daN (2.650 kgf)
Vibration levels (EN 12096:1997)*
Travel speed................................................................. 2,5 - 4,0 km/h
Hand/arm............................... ≤ 2,5 m/s² (uncertainty K = 1,2 m/s²)
Body...................................... ≤ 0,5 m/s² (uncertainty K = 0,2 m/s²)
* for the purpose of risk assessment under directive 2002/44/EC,
please refer to ISO/TR 25398:2006.

10
 Dimensions & Working Range
BUCKET RANGE

50
Width Capacity Weight

°
No. of teeth
763

mm m³ (ISO 7451) kg
250 0,035 30 2
512
110

R81
0
350 0,055 40 3
12 450 0,07 50 4

°
75
550 0,085 60 5

4045 (4060)
1390
3090 (3105) 955

2497
285

AA_1

AA_2 AA_2
544
295

300 1485

1200 1950
1500 1448

Cab, rubber shoes, 450 mm bucket,

blade down
A - Distance from machine’s center B - Height at bucket pin

ARM LENGTH 1.115 mm

1960 (2060)
A 2m 3m Max. outreach
B Front 360° Front 360° Front 360°
4170 (4340)

3m - - (*)560 520 (*)570 400

2m (*)640 (*)640 (*)570 490 (*)540 300
2960 (3120)

1m (*)900 660 (*)740 460 (*)530 270

0m (*)1.260 630 (*)780 410 (*)600 290
-1 m (*)1.000 660 (*)740 380 (*)620 310
325

AA_2

Unit: kg

ARM LENGTH 1.370 mm

325
1540 (1760)

2m 3m Max. outreach
2470 (2720)

A
B Front 360° Front 360° Front 360°
3m - - (*)470 (*)470 (*)470 370
2m - - (*)480 (*)480 (*)490 290
1m (*)970 660 (*)580 430 (*)520 260
0m (*)1.250 625 (*)750 380 (*)540 270
4280 (4530)
4430 (4660)
-1 m (*)1.150 630 (*)730 380 (*)600 300
Unit: kg

NOTE:
Ratings are based on ISO standard 10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. Excavators used in object handling
operations must comply with the related local regulations and must be equipped with hose burst valves (boom & arm) and an overload warning device in
compliance with EN474-5.
- The values marked with an asterisk (*) are limited by the hydraulic capacities.
- Calculations are based on the machine resting on a uniform and firm surface.
- The lifting point is a hypothetical hook placed behind the bucket.

11
Mini-Excavator
PC26MR-3

Standard Equipment
• EU Stage V engine • 1.115 mm digging arm • Lifting cylinder guard • Master disconnect switch
• ROPS (ISO 3471) - OPG (ISO 10262) • 1 / 2 way auxiliary hydraulic circuit • Working light on boom • Boom and arm safety valves,
level 1 tilting cab with heating up to the arm • Travel acoustic alarm overload warning device
• 300 mm rubber shoes • Blade • KOMTRAX™ - Komatsu satellite (for EU countries only)
• Two speeds with “Automatic Shift • Adjustable suspension seat monitoring system
Down”

Optional Equipment
• ROPS (ISO 3471) - OPG (ISO 10262) • Bucket range (250 - 550 mm) • Blade safety valve • Radio pre-setting
level 1 canopy • 1.300 mm ditch cleaning bucket • Relieve valves for attachments • Proportional controls for attachment
• 300 mm steel shoes • Bucket linkage with lifting eye • Rotating beacon on joystick
• 300 mm road liners • Boom and arm safety valves, • Rear-view mirrors • Komatsu quick-coupler
• 1.370 mm digging arm overload warning device • Cab/canopy working lights • Buckets with Kmax teeth
(for non-EU countries only) • Additional cab rear working light

Your Komatsu partner:

Komatsu Europe
International NV
Mechelsesteenweg 586
B-1800 VILVOORDE (BELGIUM)
Tel. +32-2-255 24 11
Fax +32-2-252 19 81
www.komatsu.eu

WESS005907 10/2019 Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.

Printed in Europe – This specification sheet may contain attachments and optional equipment that are not available in your area.
Please consult your local Komatsu distributor for those items you may require. Materials and specifications are subject to change without notice.