LOW PROFILE SLIDE TYPE RTS

Company's headquarters in Dedemsvaart, Netherlands

Innovative design and manufacture of precision

linear bearings, frictionless slides, positioning
stages and engineered-to-spec motion systems.

2
INTRODUCTION
PM has engineered and manufactured innovative and top quality precision linear bearings and slides at our research
and production facilities in the Netherlands since 1966. We are experts in finding solutions that meet the specific
requirements of a wide variety of industry applications. A trusted partner for hundreds of industry heavyweights
around the globe, our client base ranges from the semiconductor industry, medical technology and metrology sectors,
to industrial automation, space and defence industries.

COMPANY more widely as well as performance insights generated by

The key to the exceptional quality of PM products lies in industry deployment of precision applications.
our highly specialised manufacturing machinery and facili-
ties. Specifically, the PM production facility is temperature Over the past 50 years PM has expanded its reach to serve
controlled and built to suppress and minimise distortions a global client base. Our experienced, multilingual engi-
caused by vibration. Our precision rails are produced with neering and sales teams stand ready to work with you in
remodeled, non-standard machinery. The resulting high realising your demanding projects.
quality of our products makes PM an attractive supplier
for various high-tech industries including semiconductor, Technical data in this catalogue is based on standard quality
optical and life sciences. grade Q8 (no suffix). For higher quality grades please
contact our product experts to discuss your requirements.
NEW PRODUCTS
We constantly deploy the latest technologies to create
new products or functionally enhance existing products
in our range. Clients typically choose to work with PM
for our proven ability to meet a complex set of require-
ments, mostly including maximum performance of parts
in the most compact of spaces. We are always working
to further refine the performance of PM products, in order
to ensure that we consistently meet the requirements
of clients in high-tech industries. The following new PM
products are the result of our relentless drive to be oper-
ating at the cutting edge of the latest technologies:
• Linear bearing type RNG: is a compact design with
high load capacity. Available with optional Anti Cage DISCLAIMER
Creep solution (ACC). Perfectly integrates robust- This catalogue is the result of a full revision of its previous
ness and compactness. edition. It reflects the latest progress in linear bearings tech-
• Micro roller slide type PMMR: featuring crossed- nology as well as insights gathered from industry applica-
rollers. Designed for best performance in micro- tion. Any information from previous editions that does not
sized applications. correspond to the data in this current edition, is therefore
• Flat Mounted Bearing type FMB: is an extremely invalid. Due to the continuous development of our product
flat, low-friction and easy to install table bearing. range, we reserve the right to make modifications without
prior notice.
CUSTOMISED PARTS
In addition to offering high-quality standardised products, © Copyright October 2020, second edition
we design and manufacture engineered linear bearings PM B.V. - Discover Precision
and positioning systems meeting our clients’ applica-
tion-specific requirements. Reproduction in part or in whole is only allowed with
PM combines the latest knowledge from its in-house R&D written authorization of PM.
department, developments in manufacturing technology

3
F R I C T I O N L E S S S L I D E S

PRODUCT OVERVIEW
PM slides are ready-to-install single axis components Each type comes with attachment holes drilled to standard
with capacity for limited linear movement. These crossed configuration to facilitate quick and easy assembly into
roller slides use PM linear bearings type RSD come facto- your application. Thanks to their excellent running charac-
ry-preloaded, thus assuring consistently high running teristics together with their proven solid reliability, these
accuracies, extremely low uniform friction coefficients slides are today’s standard for applications in the general
and long operating lifetimes. With a variety of models machine industry's factory automation, including in high
and a wide range of sizes available, the designer is given precision equipment. Custom designs can be supplied
maximum flexibility to find an appropriate solution for all according to your specifications.
sorts of applications requiring linear movement.

1. CROSSED ROLLER SLIDES TYPE RT 2. CROSSED ROLLER SLIDES TYPE RTA

• Stroke lengths of 10 to 950 mm • Stroke lengths of 10 to 950 mm
• For highest accuracy performance • Extremely low uniform friction coefficient
• Normal to high load capacity • Normal to high load capacity
• Steel and cast-iron slide bodies • Aluminium slide bodies
• Available in 6 standard sizes • Available in 6 standard sizes

3. DUST-PROTECTED SLIDES TYPE RTNG 4. LOW PROFILE SLIDE TYPE RTS

• Stroke lengths of 10 to 250 mm • Stroke lengths of 12 to 130 mm
• Protection against dust and dirt • For highest accuracy performance
• For highest accuracy performances • Low overall height with high stiffness
• Steel and cast-iron slide bodies • Steel slide bodies
• High rigidity • Available in 3 standard sizes

5. MINIATURE BALL SLIDES TYPE PMM 6. MINIATURE CROSSED ROLLER SLIDES

• Stroke lengths of 5 to 70 mm TYPE PMMR
• Ultra-compact and lightweight design • Stroke lengths of 5 to 70 mm
• For rapid and precise movements • All parts made of stainless steel
• Slide parts made of stainless steel • For highest stiffness and accuracy requirements in
• Available in standard 3 sizes the smallest of application spaces
• Vmax=2 m/s, amax=200 m/s2 (20g)
• Cdyn up to 1020 N

103
TECHNICAL DATA
ASSEMBLY
For each type the mounting holes are drilled to standard
configuration in the slide top and slide base facilitating
quick and easy installation into the application. Threaded
holes in the slide parts are according to ISO-standards.
Please note that dimensions listed in this catalogue are
in mm.
PM linear slides are precision devices; proper mounting is
a prerequisite for their performance according to specifi-
cations. Slides must be mounted onto rigid, fine-machined
(preferably fine-milled or grinded), flat surfaces and must
be supported over their entire base length. Specifications
as listed are only valid when these conditions are met.
Example of location internal stroke limit screws
The surface of the side opposite to the preload set screws
is ground parallel to the slide axis and can therefore be DELIVERED CONDITION
used as a reference face for mounting the slide into the PM slides are ready-to-use. The slides are factory
application. preloaded by the use of lateral set screws and free of
play. The amount of preload is approximately 10% of the
OPERATING TEMPERATURE dynamic load capacity. The slides are delivered with a
PM slides are capable of operating in a temperature range small quantity of oil for lubrication which also protects the
of -30 °C to +120 °C. For slides which contain plastic rails in the slides against corrosion. The quality grade of
components (plastic cages), the operating temperature the crossed roller linear bearings which are used in the
range is -30 °C to +80 °C. linear slides is in standard accuracy grade Q8.

MAXIMUM VELOCITY AND ACCELERATION The slides are free from stick-slip. The coefficient of fric-
RTN / RTL, RTNG and RTS types crossed roller slides tion range for slides fitted with balls or cylindrical rollers
Max. recommended speed v = 50 m/min. is 0.0005 to 0.003. PM slides are manufactured according
Max. acceleration a = 8 m/sec². the best manufacturing standards, offering high smooth-
ness and precision of movement.
PMM type ball miniature slides PMM and PMMR type of miniature slides are factory
Max. recommended speed v = 50 m/min. preloaded by means of geometry pairing.
Max. acceleration a = 8 m/sec².
SERVICE
PMMR type crossed roller miniature slides PM slides are factory-preloaded and don’t need readjust-
Max. recommended speed v = 120 m/min. ment. Depending on the application requirements the
Max. acceleration a = 200 m/sec² (20g). linear bearings need re-lubrication. There are no specific
calculations to determine the lubrication intervals for linear
INTERNAL STROKE LIMIT SCREWS bearings, thus it must be determined for each application.
Crossed-roller slides RTN/RTL and RTNA/RTLA have However, we recommend a small quantity of lubrication
internal stroke limit screws in the center line of the slides. at least twice a year for oil and at least once a year for
These screws are for emergency use only and may not grease.
be used as a regular stroke end stop, as this can cause The lubrication can be applied to the linear bearings using
permanent damage to the linear bearings. the lateral gap between the rails. If this is not possible
cause of the design of the machine we advise the use of
special lubrication holes which can be added to the rails. If
this is the case for you, please consult a PM advisor.

104
STORAGE VACUUM AND CLEANROOM COMPATIBLE
PM slides are precision components and need to be The majority of PM slides can be prepared for use in (ultra-
handled with great care. Slides are delivered in a package, high) vacuum or cleanroom environments. Special care has
special developed for optimum protection against to be taken, for example when selecting low outgassing
external vibrations and contamination. For transport and materials, special lubricants, surface finishings, vented
storage use the original package. Slides should be stored stainless steel fasteners for use in blind tapped holes,
at constant room temperature and under clean and dry special ball- or crossed roller cages as well as switches
conditions. Remove the slides from their packaging just and wires. Slides are assembled in our modern cleanroom
before use. cells certified to ISO/FDIS 14644-1 class 6 with cleanspots
class 5.
LOADS AND MOMENTS
Slides listed in this catalogue are able to carry loads and
moments in any direction. Load ratings are compliant with
ISO and DIN standards for calculating roller bearings (ISO
standard 281, for miniature slide type PMM DIN 636, part
3). To ensure high running accuracy and to prevent the
occurrence of play, any vibration and overloading must be
avoided.

Load capacity C, defined in ISO76-1987, is the maximum

downward load or force located in the center of the
upper part in horizontal zero-position.
MI = Pitch moment: when a load is cantilevered (not CUSTOMISED LINEAR SLIDES
symmetrically mounted) off the end of a slide, In a situation that a standard product does not suit your
parallel to the direction of travel. application we offer customised product service. For
Md = Roll moment: when a load is cantilevered off the example in:
side of a slide, perpendicular to the direction of • Special geometry
travel. • Non-standard materials
Mr = Yaw moment: when a force causes a rotation • Customized cages
moment around the centre of an axis. • Vacuum and UHV-compatibility
Exceeding of the listed moment ratings may • Low till non-magnetic linear bearings
reduce the lifetime of the bearings and can • Improved raceway surfaces
degrade accuracy. Please feel free to contact • Higher load ratings
one of our product specialists for information. • Higher speeds / accelerations

With over 50 years’ experience we are well equipped

and capable to fulfil your orders meeting even the most
demanding requirements

Please consult your PM advisor for more information.

Customised miniature slide PMM 2

105
L O W P R O F I L E S L I D E S RTS

Frictionless type RTS low profile slides are high-quality preloaded linear motion units, ready for mounting.
This low profile type offers excellent running motion accuracies and is able to carry medium loads and moments in
any direction.

SLIDE BODY MATERIALS OPTIONAL FEATURES

Steel with black oxide finish • Selected slides can be supplied with a height
tolerance of ± 0.01 mm
FEATURES AND SPECIFICATIONS • Cages can be replaced by plastic crossed roller type
• Available in 3 sizes KZR or type KKLK equipped with balls
• Incorporates preloaded type RSD linear bearings • Higher accuracy grade bearings
and centre rail which act as slide base (through hard- • Stainless steel version
ened), including roller cages • SF finishing for linear bearings for smooth and
• Slide top and centre rail have equal lengths ultra-precise operation
• Can be mounted in horizontal and vertical direction • UHV compatible version
• Roller cage material brass
• All mounting surfaces are precision ground. One ORDER NOTES
flank of the slide (the side opposite to the adjustment Please specify the following in your order note:
screws) is ground parallel to the linear bearings to • Model no. and quantity needed
serve as a reference face
• The slide top and base are equipped with tapped Example: 1 piece slide type RTS-2065
attachment holes, drilled to standard configuration
enabling easy mounting
• For running accuracies please refer to page 142

131
 RTS

Main dimensions
Type A B C D Stroke H B1 C1 C2 f f1 f2 f3 g g1
RTS-1525 25 12 3.5 3.5 5 1x10 1x18
RTS-1535 35 18 3.5 7.5 2x10 1x28
RTS-1545 45 25 12.5 8.5 3x10 1x20
RTS-1555 55 20 8 1.5 32 7 5 7.5 7.5 12.5 12.5 7.5 4x10 1x30
RTS-1565 65 40 12.5 - 5x10 2x20
RTS-1575 75 45 22.5 - 6x10 1x30
RTS-1585 85 50 12.5 - 7x10 2x30
RTS-2035 35 18 3.5 - 7.5 1x15 1x28
RTS-2050 50 30 3.5 - 2x15 1x43
RTS-2065 65 40 17.5 - 3x15 1x30
RTS-2080 80 30 12 2 50 12 7 11.5 10 17.5 - 10 4x15 1x45
RTS-2095 95 60 17.5 - 5x15 2x30
RTS-2110 110 70 32.5 - 6x15 1x45
RTS-2125 125 80 17.5 - 7x15 2x45
RTS-3055 55 30 7.5 - 10 1x25 1x40
RTS-3080 80 45 7.5 - 2x25 1x65
RTS-3105 105 60 27.5 - 3x25 1x50
RTS-3130 130 40 16 3 75 16 9 15.5 15 27.5 - 15 4x25 1x75
RTS-3155 155 90 27.5 - 5x25 2x50
RTS-3180 180 105 52.5 - 6x25 1x75
RTS-3205 205 130 27.5 - 7x25 2x75

Bold = Short lead time item

Regular = Long lead time item - please ask us about prices and lead times

132
L O W P R O F I L E S L I D E S RTS

Cdyn Weight Md in Ml in Mr in
g2 g3 h h1 m p x y in N (kg) Nm Nm Nm
1x18 2x7.5 208 0.03 0.8 0.6 0.8
1x20 2x10 364 0.04 1.4 2.5 1.5
1x28 3x10 468 0.05 1.8 3.7 2.0
1x30 4x10 14 12.6 M2.5 4.6 7.7 5.5 572 0.06 2.2 5.0 2.6
- 5x10 676 0.07 2.6 6.2 3.2
- 6x10 780 0.08 3.0 7.5 3.8
- 7x10 936 0.09 3.6 8.7 4.7
- 1x20 430 0.10 2.8 2.8 2.6
- 2x15 602 0.12 3.9 5.5 3.5
- 3x15 860 0.16 5.6 9.6 5.3
- 4x15 22 20 M3 6 13 8.5 1032 0.19 6.7 12.4 6.6
- 5x15 1290 0.23 8.4 16.5 8.6
- 6x15 1462 0.26 9.5 19.3 9.8
- 7x15 1720 0.29 11.2 23.4 11.9
- 1x35 952 0.10 8.3 10.9 7.2
- 2x25 1360 0.35 11.9 19.0 10.6
- 3x25 1904 0.47 16.7 29.9 15.7
- 4x25 30 28.5 M4 7.5 17.5 11.5 2312 0.59 20.2 38.1 19.6
- 5x25 2856 0.70 25.0 49.0 24.9
- 6x25 3264 0.82 28.6 57.1 29.0
- 7x25 3672 0.92 32.1 65.3 33.0

Units: mm

133
 SLIDES

RUNNING ACCURACIES AND TOLERANCES In more complex cases, for instance involving a combi-
The table below shows the accuracies for different types nation of axes, please contact us for expert support. On
of PM slides. Accuracies are checked with the slides being request we are able to deliver the precision slides provided
in unloaded horizontal position. Values displayed below with a certificate of compliance, on the basis of measure-
are also applicable to 2-axis combinations. Where ment by laser accuracy equipment. Special higher accu-
relevant, please refer to the appropriate stroke lengths. racy grade slides are available on request.

Straight line accuracy in µm Flatness accuracy in µm Parallelism in µm, neutral

Type A in mm over travel lenght on the side over travel lenght on the top position on slide top
25-50 2 2 5
55-95 3 2 6
105-155 4 3 7
RT
160-305 4 3 8
(RTN/RTL)
310-510 4 4 10
510-710 5 4 13
810-1010 5 5 15
25-50 2 2 5
55-95 3 2 5
RTA 105-155 4 3 8
(RTNA/RTLA) 160-305 4 3 10
Aluminum 310-510 4 4 15
510-710 5 4 20
810-1010 5 5 25
52-91 2 2 5
106-166 3 2 6
171-314 3 3 7
RTNG
317-517 4 3 10
524-817 4 4 13
824-1028 5 5 15
25-45 3 3 2
RTS 55-95 4 4 4
105-155 5 5 5
15-30 3 4 5
PMM and
35-50 4 4 6
PMMR
60-80 5 6 8

Tolerance on the height +0.03 mm / -0.1 mm | Optional: Slides can be supplied with a height tolerance of ±0.01mm

1. STRAIGHT LINE ACCURACY: this is the

amount of error deviance from the ideal straight line of
travel in the vertical plane.
2. FLATNESS ACCURACY: this is the amount of
error deviance from the ideal straight line of travel in the
horizontal plane.
PARALLISM IN Μµm, NEUTRAL POSITION ON
SLIDE TOP: the parallellism of the slide surfaces occures
unloaded on a flat, horizontal surface in zero-position.

142
 SAVE TIME!
Direct acces to the 3D CAD models of our standard products

WWW.PM.NL
 PM RESEARCH
AND PRODUCTION FACILITIES

PM B.V.
Galileistraat 2
NL-7701 SK, Dedemsvaart
The Netherlands

Tel:+31 523 61 22 58
[email protected]

www.PM.nl
2020