Scribd
Upload
8 views2 pages

Questions_Week-02

The document contains a series of questions related to design concepts, including conceptual design, design embodiment, parametric design, and modular architecture. It also includes calculations for average size and acceptable limits for a tie-rod based on given specifications. The questions test knowledge on product architecture and design principles.

Uploaded by

Chidu K
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views2 pages

Questions_Week-02

The document contains a series of questions related to design concepts, including conceptual design, design embodiment, parametric design, and modular architecture. It also includes calculations for average size and acceptable limits for a tie-rod based on given specifications. The questions test knowledge on product architecture and design principles.

Uploaded by

Chidu K
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Week-02

Which of the following don’t encompasses Conceptual design?

a) Problem definition
b) Information gathering
c) Configuration design
d) Concept generation

Design Embodiment provide a structured development from the problem concept generation to the
_______.

a) Specification stage
b) Manufacturing process
c) Detail design phase
d) None of these

Parametric design phase doesn’t entail about:

a) Information about dimensions and tolerances


b) Decision on material and manufacturing processes
c) Determination of features in space
d) Evaluation of robustness

Modular architecture details

a) Few functional blocks


b) Poorly defined interactions
c) Well-defined interaction
d) Full functional blocks

For defining the product architecture, a recommendation of __ elements used for defining the functional
requirements

a) 10
b) 20
c) 30
d) 40

Main function of the CONFIGURATIONAL DESIGN doesn’t include

a) Form
b) Building components
c) Materials
d) Production/ Manufacturing Alternatives

Product architectures are defined through

a) involved shape and dimensions of the product


b) different arrangement of physical elements
c) availability of the material
d) None of the above

The manufacturer specified upper limit for a tie-rod is 40.15 cm and lower limit is 39.85 cm. What will be
the average size and deviation?

a) 40 and 40.001 cm, respectively


b) 40 and 0.15 cm, respectively
c) 40.5 and 40.01 cm, respectively
d) 40 and 0.30 cm, respectively

Solution: Average Size = (40.15+39.85)/2 = 40 cm,

Deviation = (Upper limit – average size) = (Average size – Lower limit)

= 40.15 – 40 = 40 – 39.85 = 0.15 cm

The manufacturer specification for the average size of a tie-rod is 24 cm and standard deviation is 0.45
cm, respectively. What will be the acceptable lower limit?

a) 23.55 cm
b) 24.45 cm
c) 24.225 cm
d) 23.775 cm

Solution: Acceptable Upper limit = 24 - 0.45 = 23.55 cm

You might also like