ECDIS Navigator G2 white paper

Intermarine Electronics has been producing marine navigation equipment for

more than 22 years. Our ECDIS are in operation worldwide on all kinds of
ocean going vessels from small ferries to large ships. When selecting
Intermarine as a partner to integrate ECDIS into your fleet, you will have the
chance to obtain a wide range of comprehensive services and support as a total
ECDIS solution.

Our new ECDIS NAVIGATOR G2 products are powered by the well-known G2

chart handler software, currently used by hundreds of navigation officers on board.
The new G2 Ver. 3 is upgraded with the new IEC 62288 Ed. 3. Has been a wheel
mark approved.

It is designed to operate in some of the world’s harshest, and often hazardous,

marine conditions and environments, and is subject to rigid requirements and
regulations for safety and security while balancing quality, dependability, and
cost-efficiency. The compact, all-in-one Navigator G2 solution is the ideal
solution for ship navigation, and it is one of the most powerful ECDIS on the
market offered at a very competitive price for all budgets.

The implementation of the new IMO standardization principles in our new G2

ECDIS, enables users to locate and understand important information quickly
and enhance all levels of situation awareness. Good decision-making depends
on the effective and efficient use of essential information from across different
pieces of equipment.
Users generally follow a common, but often undocumented, workflow for the
functions associated with their role. Standardization of information and the way
it is presented makes this task easier. As an example, the standardization of
essential information for navigational tasks means that the user can easily
comprehend information across different navigation systems and equipment.
Therefore greater usability, can reduce the workload and simplify the process
which increases efficiency and effectiveness by having Standard Vocabulary,
Symbols and Icons, Patterns, Grouping, standard Location, Recognition,
Frequency of use, Hot Keys, Shortcuts,Visibility of system status and Projection
to the real world.
 LATEST TECHNOLOGY

The greatest challenge for the marine and offshore industries when choosing
hardware and equipment is balancing quality, dependability, and cost-
efficiency.
Navigator G2 offer the ultimate in technology performance, convenience, state
of the art design and enduring quality.

It has been built using Intel i7 11th generation CPU with a maximum turbo
frequency of 4.7 GHz and an Intel GPU Iris Xe Graphics G7 96EUs capable to
running 3D rendering to boost speed that increases performance.

A 24" LCD screen with a high resolution of 1920x1200 is installed to offer

greater analysis and viewing space.

A projective capacitive multi-touch screen with zooming is incorporated within

a sandwich of tempered glass for security controlled at your fingertips to get the
job done. It has been chemically treated to reduce reflection and glare. Moreover
LED Backlight Technology, full dimming, and multi-power input 95-260 V AC
and optionally 9-36VDC.It is a future-proof hardware and software, for system
ongoing IMO compliance.
 OpenGL GRAPHICS RENDERING

The use of open GL GPU graphics rendering means that they are able to process
many tasks simultaneously, unlike CPUs which operate serially. A GPU is great
at handling lots of information’s and processing on its thousands of cores while
CPUs have “only” few. thus they provide 50-100 times faster rendering than
CPUs. Apart from rendering, GPU is also used to conduct mathematical
calculations rapidly for other tasks GPUs are best used for graphics-intensive
rendering especially for creation, 3D Visualization, Image Processing, Deep
Machine Learning, and big data processing.

APPROVALS
The new Navigator G2 is “wheel Mark” approved in accordance with the most
recent rules and regulations. We continuously update our ECDIS software to
reflect the most recent IMO and class regulations.

CHARTS UPDATE & NAVTOR COMPATIBILITY

Chart updates are as simple as clicking a button, and when the optional NAVBOX
is utilized, updates are carried out automatically. In addition to the chart database,
all permits, AIO data, and subscribed digital publications are also updated at the
same time. Our ECDIS products are fully compatible with all NAVTOR products
www.navtor.com

O/S & ONE KEY RECOVERY

Windows 10 Pro serves as the Navigator G2 operating system. For recovering the
ECDIS from hardware or software-related issues, One Key Recovery is provided.
It allows ECDIS users to restore all data, operating system, programs, and settings
following a crash, corruption, physical/technical malfunction, or other issues that
have rendered the ECDIS inoperable. In order to prevent any unauthorized deletion
or change, it is kept in a hidden sector the disk.

EASY INSTALLATION

Installing and using our new ECDIS has never been so easy; just connect the
power supply and sensors, insert the chart permits and the ECDIS is ready to
run. It is the most intuitive navigation available as a compact off-the-shelf
package specific to your requirements. It is a pre-configured projector
capacitive multi-touch ECDIS system that offers a “plug and play” installation
with a friendliness and ease of operation.

It is optimized for retrofits with Flexibility in installation; supporting both table-

top mounting as well as flush-mounting and ceiling to match the space
availability in the wheelhouse. More over if you choose to install an additional
external NMEA multiplexer, multipliers a USB hub and DVD then our ECDIS
is prepared to give +12VDC 1A to the interfaces and 2x5VDC 5A to USB hub
& DVD to facilitate a quick and simple installation and relieve USB power
stress.

A 2.5” 240GB SSD disk is fitted on a hot swap removable disk tray. In
additional M.2.2232 as well as MPCE ports are available for storage devices
support SATA protocol or NVME (PCIe) protocol M.2 disk.

There are 2 x Speakers to generate ECDIS audio alarm. Integration with

BNWAS, NAVTEX, BAM and CAM is provided according to the new IMO
requirement.
There are 3 x LAN ports for the clusters and VDR.
There is a noiseless case fan installed that is military-grade and has a 150K-hour
(MTBF) lifespan.

F1 -2A F3 -12A

CMOS HDMI VGA LAN1 USB

Clear LAN2 COM1 COM3 COM5 + Power In
Power In
9-36VDC 90-260V AC
USB LAN3
AUDIO COM2 COM4 COM6 F1 6A
+ 12V,1A out 2x SSD 2,5” hot sawp
+5V out to DVD AC In
RS422/NMEA For converter removable drive bay
& USB hub
 RELIABILTY – QUALITY- PERFORMANCE
We have made steps to significantly boost the Mean Time Between Failure
(MTBF) and reliability of our new ECDIS throughout design.
We take pride in the fact that we were able to keep the working temperature of
Navigator G2 at low levels during design and assembly, significantly enhancing
reliability and MTBF.

Furthermore, a CPU's maximum turbo speed is entirely dependent on its

temperature, therefore keeping the temperature low helps the CPU run at faster
speed (4,2Ghz) thus perform better.

All power supplies are 3-5 times more powerful than required and have full
protection against overvoltage, overcurrent, overtemperature, and short circuits.
As a result, they produce less heat. All NMEA inputs are fully protected against
lighting.The AC and DC input voltages are very thoroughly filtered and double
fused in order to safeguard the ECDIS from ship power anomalies. The MIL-C-
5541, Type II, and Class 3 treatments for aluminum chassis have been applied.
 Technical Specifications - IME1024 - ECDIS NAVIGATOR VIII
SPECIFICATIONS IME-1024(24”)
DISPLAY High definition 24” TFT display 1920x1200 with tempered Anti-reflective 5mm glass
TOUCH SCREEN Capacitive multi-touch screen 10 points activated with figure, glove & pen

PROCESSOR CPU Intel i7, 11th generation 4 cores 8 threads (maximum turbo speed 4,7Ghz)
MEMORY RAM 8GB DDR4 onboard - Expandable up to 64GB
SERIAL PORTS 6 x RS232/RS422/NMEA opto-isolated fitted inside as standalone, with plugabble terminals
HDD / SSD 1 x SATA SSD/HDD 2.5” max 3TB, fitted on a removable hot swap tray. RAID 0,1
M.2 1 x M.2 support (PCIE) with high speed NVNE protocol or SATA SSD
Mini PCIE 1 x Mini PCIE
VIDEO OUTPUT 1 x VGA output resolution 1920 x1200 & 1 x DP port with resolution 4096 /3840 x 2160
USB PORTS 2 x 3.1 USB. Gen.2 port with maximum Tx 10 Gbps, 2 x USB 3.1 standard, 4 x 2.0 USB
ETHERNET 2 x LAN Gigabit network card chip Support Network wake-up and PXE- No disk startup function
AUDIO I/O 1 x audio line output port, 1xmic in port, 2 x stereo speakers
POWER SUPPLY OUTPUT 1 1 x 5 VDC 25W to supply external DVD & multi USB hub's thus protecting standard USB 5V
against stress & overload.
POWER SUPPLY OUTPUT 2 1 x 12 VDC 1A Fused to supply an additional external NMEA converter
AC IN 90 – 265 VAC, 50-60 Hz 85W. An extra power supply of 350W is fitted inside
KEYBOARD 1XIME Backlit keyboard & 1xmouse
Dimensions 590mm (H )x 428mm(V)
Weight 9.6Kg
Chassis Aluminum
OPERATING / STORAGE TEMP -20 to +60 C
OPERATIONAL SYSTEM MS Windows 10 pro 64 bit
ONE KEY RECOVERY For back-up and restore ECDIS system in case of crash
APPROVAL Wheel Mark Approval according to (EU) 2021/1158
OPTIONAL:
DC IN DC IN 9-36 VDC
ETHERNET ports Additional 2 x LAN Gigabyte port
NMEA Additional 8xNMEA / Ethernet or 8 x NMEA / RS422 external converter
TRACKBALL Wireless trackball
PEDESTAL Heavy duty pedestal providing 0 – 60 tilt
CONSOLE Heavy duty standalone Aluminum console.

Specifications may be changed without notice

Intermarine Electronics S.A

16, Agion Saranta Str., Moschato , Greece
www.ecdisnavigator.com, www.intermarine.gr
[email protected] – Phone: +30210 4813200