WE- 211-SM001

Explanation of Digital and Analog Quantities

User Manual V1.00

WASION, S. DE R.L. DE C.V.

 Contents
1 Application Scenarios ............................................................................................... 1
1.1 Applicable Recloser and Controller Types ......................................................1
1.2 Controller Software Version Requirements .....................................................1
1.3 Operation Safety Instructions .......................................................................... 1
2 Parameter Description ............................................................................................. 2
2.1 Explanation of Real-time Digital Input parameter .......................................... 2
2.2 Explanation of Real-time Analog Parameter ................................................. 21
2.3 Explanation of Digital Output Parameters .....................................................28
1 Application Scenarios
1.1 Applicable Recloser and Controller Types

This manual applies to the complete set of devices composed of the WE-CHZ-
15.5 / 800 - 16, WE-CHZ-27/ 800 - 16 high voltage AC automatic recloser, and the
WSDT-8000-X intelligent distribution controller.

1.2 Controller Software Version Requirements

The applicable program software versions are as follows：

Comunicación：L050_DT80X01.10_MX02_20241216
Protección：L050_DT8000X01.10_M001

1.3 Operation Safety Instructions

Installation, operation, and maintenance must be performed by personnel who

are professionally trained, experienced, and familiar with equipment and electrical
safety requirements.
The buyer is responsible for ensuring that the personnel responsible for the
installation, operation, and maintenance of the equipment described in this manual
receive professional task training. The most basic condition that the leaders of these
teams must meet is:
 Familiarize yourself with the contents of this manual;
 Have industry experience in the safe operation of low and medium voltage
equipment;
 Master the knowledge of energizing, de-energizing, and grounding power
distribution equipment;
 Have extensive experience in the installation and application of low and medium
voltage systems, and experience in the maintenance and handling of low and
medium voltage protective equipment.

1
2 Parameter Description
2.1 Explanation of Real-time Digital Input parameter

The status of these digital input parameters will be updated in real-time, with the
purpose of monitoring the real-time status of the recloser. The digital input points in
the DNP map are configured from these parameters.
Name of Parameter value is Parameter value is “Falso”
No.
Parameters “Verdadero” description description
Modificar Terminal parameter Terminal parameter
1
parámetros[0] modification started modification ended
Protección
2 Protection function enabled Protection function disabled
On[10]
Automatic reclosing (AR) Automatic reclosing (AR)
3 AR On[10]
function enabled function disabled
Synchronous closing (SYN) Synchronous closing (SYN)
4 SYN On[10]
function enabled function disabled
Overcurrent protection (OC) Overcurrent protection (OC)
5 OC On[10]
element enabled element disabled
Sensitive grounding
Sensitive grounding protection
6 SEF On[10] protection (SEF) element
(SEF) element enabled
disabled
Zero-sequence overcurrent
Zero-sequence overcurrent
7 EF On[10] protection (EF) element
protection (EF) element enabled
disabled
Negative sequence overcurrent Negative sequence
8 NPS On[10] protection (NPS) element overcurrent protection (NPS)
enabled element disabled
Frecuencia Frequency protection element Frequency protection element
9
On[10] enabled disabled
Directional power protection Directional power protection
10 PDPR On[10]
(PDPR) element enabled (PDPR) element disabled
11 ABR On[10] ABR function enabled ABR function disabled
Hotline label (HLT) function Hotline label (HLT) function
12 HLT On[10]
enabled disabled
Protection function detected Protection function did not
Protección that the analog value exceeds detect that the analog value
13
Pickup[10] the corresponding protection exceeds the corresponding
setting value protection setting value
OC1 protection function OC1 protection function did
14 OC1 Pickup[10] detected that the analog value not detect that the analog
exceeds OC1's setting value value exceeds OC1's setting

2
 value
The OC2 protection function The OC2 protection function
has detected that the analog has not detected that the
15 OC2 Pickup[10]
value exceeds the setting value analog value exceeds the
of OC2 setting value of OC2
The OC3 protection function The OC3 protection function
has detected that the analog has not detected that the
16 OC3 Pickup[10]
value exceeds the setting value analog value exceeds the
of OC3 setting value of OC3
The OC4 protection function The OC4 protection function
has detected that the analog has not detected that the
17 OC4 Pickup[10]
value exceeds the setting value analog value exceeds the
of OC4 setting value of OC4
The HLT OC protection HLT OC protection function
HLT OC function has detected that the did not detect the analog
18
Pickup[10] analog value exceeds the setting value exceeding the setting
value of HLT OC value of HLT OC
EF1 protection function EF1 protection function did
detected the analog value not detect the analog value
19 EF1 Pickup[10]
exceeding the setting value of exceeding the setting value of
EF1 EF1
EF2 protection function EF2 protection function did
detected the analog value not detect the analog value
20 EF2 Pickup[10]
exceeding the setting value of exceeding the setting value of
EF2 EF2
EF3 protection function EF3 protection function did
detected the analog value not detect the analog value
21 EF3 Pickup[10]
exceeding the setting value of exceeding the setting value of
EF3 EF3
EF4 protection function EF4 protection function did
detected that the analog value not detect that the analog
22 EF4 Pickup[10]
exceeded the setting value of value exceeded the setting
EF4 value of EF4
HLT EF protection function HLT EF protection function
HLT EF detected that the analog value did not detect that the analog
23
Pickup[10] exceeded the setting value of value exceeded the setting
HLT EF value of HLT EF
SEF protection function SEF protection function did
detected that the analog value not detect that the analog
24 SEF Pickup[10]
exceeded the setting value of value exceeded the setting
SEF value of SEF
HLT SEF protection function HLT SEF protection function
HLT SEF
25 detected that the analog value did not detect that the analog
Pickup[10]
exceeded the setting value of value exceeded the setting

3
 HLT SEF value of HLT SEF
NPS1 protection function NPS1 protection function did
NPS1 detected that the analog value not detect that the analog
26
Pickup[10] exceeded the setting value of value exceeded the setting
NPS1 value of NPS1
NPS2 protection function NPS2 protection function did
NPS2 detected that the analog value not detect that the analog
27
Pickup[10] exceeded the setting value of value exceeded the setting
NPS2 value of NPS2
NPS3 protection function The NPS3 protection function
NPS3 detected that the analog value did not detect the analog
28
Pickup[10] exceeded the setting value of value exceeding the setting
NPS3 value of NPS3
The NPS4 protection function The NPS4 protection function
NPS4 detected the analog value did not detect the analog
29
Pickup[10] exceeding the setting value of value exceeding the setting
NPS4 value of NPS4
The HLT NPS protection The HLT NPS protection
HLT NPS function detected the analog function did not detect the
30
Pickup[10] value exceeding the setting analog value exceeding the
value of HLT NPS setting value of HLT NPS
The CU protection function The CU protection function
detected the analog value did not detect the analog
31 CU Pickup[10]
exceeding the setting value of value exceeding the setting
CU value of CU
ZSOV protection function ZSOV protection function did
ZSOV detected that the analog value not detect that the analog
32
Pickup[10] exceeded the setting value of value exceeded the setting
ZSOV value of ZSOV
NSOV protection function NSOV protection function
NSOV detected that the analog value did not detect that the analog
33
Pickup[10] exceeded the setting value of value exceeded the setting
NSOV value of NSOV
UV protection function did
UV protection function detected
not detect that the analog
34 UV Pickup[10] that the analog value exceeded
value exceeded the setting
the setting value of UV
value of UV
OV protection function did
OV protection function detected
not detect the analog value
35 OV Pickup[10] that the analog value exceeded
exceeding the OV setting
the setting value of OV
value
UF1 protection function UF1 protection function did
36 UF1 Pickup[10] detected the analog value not detect the analog value
exceeding the UF1 setting value exceeding the UF1 setting

4
 value
UF2 protection function did
UF2 protection function
not detect the analog value
37 UF2 Pickup[10] detected the analog value
exceeding the UF2 setting
exceeding the UF2 setting value
value
UF3 protection function did
UF3 protection function
not detect the analog value
38 UF3 Pickup[10] detected the analog value
exceeding the UF3 setting
exceeding the UF3 setting value
value
UF4 protection function UF4 protection function did
detected that the analog value not detect that the analog
39 UF4 Pickup[10]
exceeded the setting value of value exceeded the setting
UF4 value of UF4
OF protection function did
OF protection function detected
not detect that the analog
40 OF Pickup[10] that the analog value exceeded
value exceeded the setting
the setting value of OF
value of OF
PDPR1 protection function PDPR1 protection function
PDPR1 detected that the analog value did not detect that the analog
41
Pickup[10] exceeded the setting value of value exceeded the setting
PDPR1 value of PDPR1
PDPR2 protection function PDPR2 protection function
PDPR2 detected that the analog value did not detect the analog
42
Pickup[10] exceeded the setting value of value exceeding the setting
PDPR2 value of PDPR2
PDPR3 protection function PDPR3 protection function
PDPR3 detected the analog value did not detect the analog
43
Pickup[10] exceeding the setting value of value exceeding the setting
PDPR3 value of PDPR3
PDPR4 protection function PDPR4 protection function
PDPR4 detected the analog value did not detect the analog
44
Pickup[10] exceeding the setting value of value exceeding the setting
PDPR4 value of PDPR4
Any protection function Any protection function did
45 Advertencia[10] detected a fault triggering an not detect a fault or trigger a
alarm fault alarm reset
OC1 protection function OC1 protection function did
Advertencia(OC
46 detected a fault triggering an not detect a fault or trigger a
1)[10]
alarm fault alarm reset
OC2 protection function OC2 protection function did
Advertencia(OC
47 detected a fault triggering an not detect a fault or trigger a
2)[10]
alarm fault alarm reset
Advertencia(OC OC3 protection function OC3 protection function did
48
3)[10] detected a fault triggering an not detect a fault or trigger a

5
 alarm fault alarm reset
OC4 protection function OC4 protection function did
Advertencia(OC
49 detected a fault and triggered an not detect a fault or triggered
4)[10]
alarm a fault alarm reset
HLT OC protection function HLT OC protection function
Advertencia(HL
50 detected a fault and triggered an did not detect a fault or
T OC)[10]
alarm triggered a fault alarm reset
EF1 protection function EF1 protection function did
Advertencia(EF
51 detected a fault and triggered an not detect a fault or triggered
1)[10]
alarm a fault alarm reset
EF2 protection function EF2 protection function did
Advertencia(EF
52 detected a fault and triggered an not detect a fault or trigger a
2)[10]
alarm fault alarm reset
EF3 protection function EF3 protection function did
Advertencia(EF
53 detected a fault and triggered an not detect a fault or trigger a
3)[10]
alarm fault alarm reset
EF4 protection function EF4 protection function did
Advertencia(EF
54 detected a fault and triggered an not detect a fault or trigger a
4)[10]
alarm fault alarm reset
HLT EF protection function HLT EF protection function
Advertencia(HL
55 detected a fault and triggered an did not detect a fault or
T EF)[10]
alarm trigger a fault alarm reset
EF protection function does
Advertencia(EF EF protection function detects a
56 not detect a fault or resets the
)[10] fault and triggers an alarm
fault alarm
SEF protection function does
Advertencia(SE SEF protection function detects
57 not detect a fault or resets the
F)[10] a fault and triggers an alarm
fault alarm
HLT SEF protection function HLT SEF protection function
Advertencia(HL
58 detects a fault and triggers an does not detect a fault or
T SEF)[10]
alarm resets the fault alarm
NPS1 protection function NPS1 protection function did
Advertencia(NP
59 detected a fault triggering an not detect a fault or trigger
S1)[10]
alarm the fault alarm reset
NPS2 protection function NPS2 protection function did
Advertencia(NP
60 detected a fault triggering an not detect a fault or trigger
S2)[10]
alarm the fault alarm reset
NPS3 protection function NPS3 protection function did
Advertencia(NP
61 detected a fault triggering an not detect a fault or trigger
S3)[10]
alarm the fault alarm reset
NPS4 protection function NPS4 protection function did
Advertencia(NP
62 detected a fault triggering an not detect a fault or triggered
S4)[10]
alarm a fault alarm reset
63 Advertencia(HL HLT NPS protection function HLT NPS protection function

6
 T NPS)[10] detected a fault triggering an did not detect a fault or
alarm triggered a fault alarm reset
CU protection function did
Advertencia(CU CU protection function detected
64 not detect a fault or triggered
)[10] a fault triggering an alarm
a fault alarm reset
ZSOV protection function ZSOV protection function did
Advertencia(ZS
65 detected a fault triggering an not detect a fault or trigger
OV)[10]
alarm fault alarm reset
NSOV protection function NSOV protection function
Advertencia(NS
66 detected a fault and triggered an did not detect a fault or
OV)[10]
alarm trigger fault alarm reset
UV protection function did
Advertencia(U UV protection function detected
67 not detect a fault or trigger
V)[10] a fault and triggered an alarm
fault alarm reset
OV protection function did
Advertencia(O OV protection function detected
68 not detect a fault or trigger
V)[10] a fault and triggered an alarm
fault alarm reset
OF protection function did
Advertencia(OF OF protection function detected
69 not detect a fault or triggered
)[10] a fault triggering an alarm
fault alarm reset
UF1 protection function UF1 protection function did
Advertencia(UF
70 detected a fault triggering an not detect a fault or triggered
1)[10]
alarm fault alarm reset
UF2 protection function UF2 protection function did
Advertencia(UF
71 detected a fault triggering an not detect a fault or triggered
2)[10]
alarm fault alarm reset
UF3 protection function UF3 protection function did
Advertencia(UF
72 detected a fault triggering an not detect a fault or trigger a
3)[10]
alarm fault alarm reset
UF4 protection function UF4 protection function did
Advertencia(UF
73 detected a fault and triggered an not detect a fault or trigger a
4)[10]
alarm fault alarm reset
PDPR1 protection function PDPR1 protection function
Advertencia(PD
74 detected a fault and triggered an did not detect a fault or
PR1)[10]
alarm trigger a fault alarm reset
PDPR1 protection function PDPR1 protection function
Advertencia(PD
75 detected a fault and triggered an did not detect a fault or
PR2)[10]
alarm trigger a fault alarm reset
PDPR1 protection function PDPR1 protection function
Advertencia(PD
76 detected a fault and triggered an did not detect a fault or
PR3)[10]
alarm trigger a fault alarm reset
PDPR1 protection function PDPR1 protection function
Advertencia(PD
77 detected a fault and triggered an did not detect a fault or
PR4)[10]
alarm trigger a fault alarm reset

7
 After the controller's arbitrary
After the controller's arbitrary
protection function detects a
Protección protection function detects a
78 fault, it triggers the automatic
Trip[10] fault, it triggers the automatic
trip to end (or if no fault is
trip to start
detected)
OC1 protection function
OC1 protection function
triggers the automatic trip to
79 Trip OC1[10] triggers the automatic trip to
end after detecting a fault (or
start after detecting a fault
if no fault is detected)
OC2 protection function
OC2 protection function
triggers the automatic trip to
80 Trip OC2[10] triggers the automatic trip to
end after detecting a fault (or
start after detecting a fault
if no fault is detected)
After the OC3 protection After the OC3 protection
function detects a fault, it function detects a fault, it
81 Trip OC3[10]
triggers the automatic trip to triggers the automatic trip to
start end (or if no fault is detected)
After the OC4 protection After the OC4 protection
function detects a fault, it function detects a fault, it
82 Trip OC4[10]
triggers the automatic trip to triggers the automatic trip to
start end (or if no fault is detected)
After the HLT OC protection After the HLT OC protection
Trip HLT function detects a fault, it function detects a fault, it
83
OC[10] triggers the automatic trip to triggers the automatic trip to
start end (or if no fault is detected)
After EF1 protection function
After EF1 protection function
detects a fault, it triggers the
84 Trip EF1[10] detects a fault, it triggers the
automatic trip to end (or if no
automatic trip to start
fault is detected)
After EF2 protection function
After EF2 protection function
detects a fault, it triggers the
85 Trip EF2[10] detects a fault, it triggers the
automatic trip to end (or if no
automatic trip to start
fault is detected)
After EF3 protection function
After EF3 protection function
detects a fault, it triggers the
86 Trip EF3[10] detects a fault, it triggers the
automatic trip to end (or if no
automatic trip to start
fault is detected)
After detecting a fault, the
After detecting a fault, the EF4
EF4 protection function
87 Trip EF4[10] protection function triggers the
triggers the end of automatic
start of automatic trip
trip (or fault not detected)
After detecting a fault, the HLT After detecting a fault, the
Trip HLT
88 EF protection function triggers HLT EF protection function
EF[10]
the start of automatic trip triggers the end of automatic

8
 trip (or fault not detected)
After detecting a fault, the
After detecting a fault, the SEF
SEF protection function
89 Trip SEF[10] protection function triggers the
triggers the end of automatic
start of automatic trip
trip (or fault not detected)
After the HLT SEF protection After the HLT SEF protection
Trip HLT function detects a fault, it function detects a fault, it
90
SEF[10] triggers the start of automatic triggers the end of automatic
trip trip (or if no fault is detected)
After the NPS1 protection After the NPS1 protection
function detects a fault, it function detects a fault, it
91 Trip NPS1[10]
triggers the start of automatic triggers the end of automatic
trip trip (or if no fault is detected)
After the NPS2 protection After the NPS2 protection
function detects a fault, it function detects a fault, it
92 Trip NPS2[10]
triggers the start of automatic triggers the automatic trip to
trip end (or if no fault is detected)
After the NPS3 protection After the NPS3 protection
function detects a fault, it function detects a fault, it
93 Trip NPS3[10]
triggers the automatic trip to triggers the automatic trip to
start end (or if no fault is detected)
After the NPS4 protection After the NPS4 protection
function detects a fault, it function detects a fault, it
94 Trip NPS4[10]
triggers the automatic trip to triggers the automatic trip to
start end (or if no fault is detected)
The HLT NPS protection
The HLT NPS protection
function triggers an automatic
Trip HLT function triggers an automatic
95 trip to end after detecting a
NPS[10] trip to start after detecting a
fault (or if no fault is
fault.
detected).
The CU protection function
The CU protection function
triggers an automatic trip to
96 Trip CU[10] triggers an automatic trip to
end after detecting a fault (or
start after detecting a fault.
if no fault is detected).
The ZSOV protection
The ZSOV protection function function triggers an automatic
97 Trip ZSOV[10] triggers an automatic trip to trip to end after detecting a
start after detecting a fault. fault (or if no fault is
detected).
NSOV protection function
NSOV protection function
triggers automatic trip end
98 Trip NSOV[10] triggers automatic trip start after
after detecting a fault (or if no
detecting a fault
fault is detected)
99 Trip UV[10] UV protection function triggers UV protection function

9
 automatic trip startafter triggers automatic trip end
detecting a fault after detecting a fault (or if no
fault is detected)
OV protection function
OV protection function triggers
triggers automatic trip end
100 Trip OV[10] automatic trip start after
after detecting a fault (or if no
detecting a fault
fault is detected)
After the OF protection
After the OF protection function
function detects a fault, it
101 Trip OF[10] detects a fault, it triggers the
triggers the automatic trip to
automatic trip to start
end (or if no fault is detected)
After the UF1 protection After the UF1 protection
function detects a fault, it function detects a fault, it
102 Trip UF1[10]
triggers the automatic trip to triggers the automatic trip to
start end (or if no fault is detected)
After the UF2 protection After the UF2 protection
function detects a fault, it function detects a fault, it
103 Trip UF2[10]
triggers the automatic trip to triggers the automatic trip to
start end (or if no fault is detected)
After the UF3 protection After the UF3 protection
function detects a fault, it function detects a fault, it
104 Trip UF3[10]
triggers the start of automatic triggers the end of automatic
trip trip (or if no fault is detected)
After the UF4 protection After the UF4 protection
function detects a fault, it function detects a fault, it
105 Trip UF4[10]
triggers the start of automatic triggers the end of automatic
trip trip (or if no fault is detected)
After the frequency
After the frequency protection
protection function detects a
Trip function detects a fault, it
106 fault, it triggers the end of
Frecuencia[10] triggers the start of automatic
automatic trip (or if no fault
trip
is detected)
After the PDPR1 protection After the PDPR1 protection
function detects a fault, it function detects a fault, it
107 Trip PDPR1[10]
triggers the automatic trip to triggers the automatic trip to
start end (or if no fault is detected)
After the PDPR2 protection After the PDPR2 protection
function detects a fault, it function detects a fault, it
108 Trip PDPR2[10]
triggers the automatic trip to triggers the automatic trip to
start end (or if no fault is detected)
After the PDPR3 protection After the PDPR3 protection
function detects a fault, it function detects a fault, it
109 Trip PDPR3[10]
triggers the automatic trip to triggers the automatic trip to
start end (or if no fault is detected)

10
 After the PDPR4 protection After the PDPR4 protection
function detects a fault, it function detects a fault, it
110 Trip PDPR4[10]
triggers the automatic trip to triggers the automatic trip to
start end (or no fault detected)
Bloqueo(Armón Phase A harmonics not
111 Phase A harmonics lock started
icos A)[10] locked
Bloqueo(Armón Phase B harmonics not
112 Phase B harmonics lock started
icos B)[10] locked
Bloqueo(Armón Phase C harmonics not
113 Phase C harmonics lock started
icos C)[10] locked
Does not meet the
Overcurrent A phase voltage
114 50V/51V-A[10] overcurrent A phase voltage
condition met
condition
Does not meet the
Meets the overcurrent B phase
115 50V/51V-B[10] overcurrent B phase voltage
voltage condition
condition
Does not meet the
Meets the overcurrent C phase
116 50V/51V-C[10] overcurrent C phase voltage
voltage condition
condition
The OC protection curve is
The OC protection curve is an
an instantaneous curve. After
instantaneous curve. After
detecting a fault in phase A, it
117 50A[10] detecting a fault in phase A, it
triggers the automatic trip to
triggers the automatic trip to
end (or if no fault is
start.
detected).
The OC protection curve is
The OC protection curve is an
an instantaneous curve. After
instantaneous curve. After
detecting a Phase B fault, it
118 50B[10] detecting a Phase B fault, it
triggers the end of the
triggers the start of the
automatic trip (or if no fault
automatic trip.
is detected).
The OC protection curve is
The OC protection curve is an
an instantaneous curve. After
instantaneous curve. After
detecting a Phase C fault, it
119 50C[10] detecting a Phase C fault, it
triggers the end of the
triggers the start of the
automatic trip (or if no fault
automatic trip.
is detected).
The EF protection curve is an The EF protection curve is an
instantaneous curve that triggers instantaneous curve that
120 50N[10]
automatic trip to start after triggers automatic trip to end
detecting a fault. (or when no fault is detected).
The OC protection curve is an The OC protection curve is
121 50F[10] instantaneous curve that triggers an instantaneous curve that
automatic trip to start after triggers automatic trip to end

11
 detecting any phase fault. (or when no fault is detected)
after detecting any phase
fault.
The OC protection curve is
The OC protection curve is an
an inverse time characteristic
inverse time characteristic curve
curve. After detecting a Phase
122 51A[10] that triggers automatic trip to
A fault, it triggers the
start after detecting a Phase A
automatic trip to end (or if no
fault.
fault is detected).
The OC protection curve is
The OC protection curve is an
an inverse time characteristic
inverse time characteristic
curve. After detecting a Phase
123 51B[10] curve. After detecting a Phase B
B fault, it triggers the
fault, it triggers the automatic
automatic trip to end (or if no
trip to start.
fault is detected).
The OC protection curve is
The OC protection curve is an
an inverse time characteristic
inverse time characteristic
curve. After detecting a Phase
124 51C[10] curve. After detecting a Phase C
C fault, it triggers the
fault, it triggers the automatic
automatic trip to end (or if no
trip to start.
fault is detected).
The EF protection curve is an
The EF protection curve is an
inverse time characteristic
inverse time characteristic
curve. After detecting a fault,
125 51N[10] curve. After detecting a fault, it
it triggers the automatic trip
triggers the automatic trip to
to end (or if no fault is
begin.
detected).
The OC protection curve is
The OC protection curve is an
an inverse time characteristic
inverse time characteristic
curve. After detecting any
126 51F[10] curve. After detecting any phase
phase fault, it triggers the
fault, it triggers the automatic
automatic trip to end (or if no
trip to begin.
fault is detected).
After the OC protection
After the OC protection
function detects a Phase A
function detects a Phase A fault,
127 OC-A Falla[10] fault, it triggers the end of the
it triggers the start of the
automatic trip (or if no fault
automatic trip
is detected)
After the OC protection
After the OC protection
function detects a Phase B
function detects a Phase B fault,
128 OC-B Falla[10] fault, it triggers the end of the
it triggers the start of the
automatic trip (or if no fault
automatic trip
is detected)
129 OC-C Falla[10] After the OC protection After the OC protection

12
 function detects a Phase C fault, function detects a Phase C
it triggers the start of the fault, it triggers the end of the
automatic trip automatic trip (or if no fault
is detected)
After the EF protection
After the EF protection function
function detects a fault, it
130 EF Falla[10] detects a fault, it triggers the
triggers the end of automatic
start of automatic trip
trip (or if no fault is detected)
After the OC protection
After the OC protection
function detects any phase
function detects any phase fault,
131 OC Falla[10] fault, it triggers the end of
it triggers the start of automatic
automatic trip (or if no fault
trip
is detected)
OC protection function Phase
OC-A OC protection function Phase A
132 A protection action end (or if
Pickup[10] protection action start
not activated)
OC protection function Phase
OC-B OC protection function Phase B
133 B protection action ended (or
Pickup[10] protection action started
did not act)
OC protection function Phase
OC-C OC protection function Phase C
134 C protection action ended (or
Pickup[10] protection action started
did not act)
OC protection function any
OC protection function any
135 OC Pickup[10] phase protection action ended
phase protection action started
(or did not act)
EF protection function
EF protection function
136 EF Pickup[10] protection action ended (or
protection action started
did not act)
UV protection function Phase
UV protection function Phase A
137 UV-A Falla[10] A protection action ended (or
protection action started
did not act)
UV protection function Phase
UV protection function Phase B
138 UV-B Falla[10] B protection action ended (or
protection action started
did not act)
UV protection function Phase
UV protection function Phase C
139 UV-C Falla[10] C protection action ended (or
protection action started
did not act)
OV protection function Phase
OV protection function Phase A
140 OV-A Falla[10] A protection action ended (or
protection action started
did not act)
OV protection function Phase
OV protection function Phase B
141 OV-B Falla[10] B protection action ended (or
protection action started
did not act)
142 OV-C Falla[10] OV protection function Phase C OV protection function Phase

13
 protection action started C protection action
completed (or not activated)
First auto-reclosing (AR)
Acción de First auto-reclosing (AR) action
143 action completed (or not
AR1[10] started
activated)
Second auto-reclosing (AR)
Acción de Second auto-reclosing (AR)
144 action completed (or not
AR2[10] action started
activated)
Third auto-reclosing (AR)
Acción de Third auto-reclosing (AR)
145 action completed (or not
AR3[10] action started
activated)
Fourth auto-reclosing (AR)
Acción de Fourth auto-reclosing (AR)
146 action completed (or not
AR4[10] action started
activated)
Auto-reclosing (AR) protection Auto-reclosing (AR)
147 Opero AR[10] function protection action protection function protection
begins action ends (or did not act)
Bloqueo Auto-reclosing (AR) function Auto-reclosing (AR) function
148
AR[10] locked not locked
Auto-reclosing (AR) did not
protect against tripping after
Auto-reclosing (AR) still
Disparo de completing all action
149 protects against tripping after
Finitivo AR[10] sequences (or did not
completing all action sequences
complete the auto-reclosing
action sequence)
Auto-reclosing (AR) did not
Completado Auto-reclosing (AR) completed
150 complete the auto-reclosing
AR[10] all action sequences
action sequence
Reclosing (AR) function Reclosing (AR) function
151 Carga AR[10]
charging completed charging not completed
Set high current protection trip
Bloqueo Alta High current protection not
152 lockout, high current protection
Corriente[10] locked
trip occurred
Controller abnormal, the
following five situations will be
reported
1. AC undervoltage
2. Battery fault
153 Malfunción[10] Controller normal
3. Switch refusal to operate
4. Core unit IO board abnormal
5. 26-pin aviation connector
contact abnormal
6. Capacitor undervoltage
154 AC On (En AC power supply started AC power supply not

14
 Batería)[10] powered
Activación Battery activation function
155 Battery activation function start
Batería[10] stop
Batería Off (En Battery is in an undervoltage Battery is in a
156
AC) state non-undervoltage state
Controller detected that the Controller detected that the
157 Cierre[10] primary switch is in the closed primary switch is not in the
position closed position
Controller detected that the Controller detected that the
158 Apertura[10] primary switch is in the open primary switch is not in the
position open position
Remoto/Local[1
159 Controller is in local mode Controller is in remote mode
0]
Subtensión
Capacitor is in an undervoltage Capacitor is in a
160 Condensador[10
state non-undervoltage state
]
Cierre
161 Manual close start Manual close end
manual[10]
Apertura
162 Manual trip start Manual trip end
manual[10]
Cierre
163 Remote close start Remote close end
Distancia[10]
Apertura
164 Remote trip start Remote trip end
Distancia[10]
Placa Ctrl. Remote operation not
165 Remote operation allowed
Remoto[10] allowed
Reinicio Ctrl. Remote reset controller status Remote reset controller status
166
Remoto[10] start end
Retorno Manual Reset Controller Status Manual Reset Controller
167
manual[10] Start Status End
Cierre
168 Closing Refusal Start Closing Refusal End
Rechazado[10]
Apertura
169 Tripping Refusal Start Tripping Refusal End
Rechazado[10]
Switch refusal action, the
following situations will be
reported:
SW Rechaza
170 1. Tripping output polarity error Switch Normal
Acción[10]
(parameter setting)
2. 26-pin aviation connector
connection abnormal
Control de Controller Cabinet Door
171 Controller Cabinet Door Open
Acceso[10] Close
172 Bloqueo[10] Recloser Lock Recloser Not Locked

15
 Caída de Generate Power Quality End Power Quality Voltage
173
tensión[10] Voltage Dip Event Dip Event
Interrupción de Generate Power Quality Voltage End Power Quality Voltage
174
tensión[10] Interruption Event Interruption Event
Aumento de Generate Power Quality Voltage End Power Quality Voltage
175
tensión[10] Surge Event Surge Event
La Batería
176 Battery Test Start Battery Test End
Prueba[10]
Batería Prueba
177 Battery Test Normal Battery Test Abnormal
Normal[10]
Batería Prueba
178 Battery Test Fault Battery Test Normal
Fallo[10]
Fallo de
179 Battery fault Battery normal
Batería[10]
AUTOCOG Remaining power detection Remaining power detection
180
On[10] function activated function disabled
Remaining power detection
Remaining power detection
Advertencia function detected a fault and
181 function detected a fault and
AUTOCOG[10] triggered an alarm reset (or
triggered an alarm
no fault detected)
Pérdida de Fase
182 Phase loss Phase normal
PERDEF[10]
Controller is in setting value Controller is not in setting
183 Grupo1 On[10]
zone 1 value zone 1
Controller is in setting value Controller is not in setting
184 Grupo2 On[10]
zone 2 value zone 2
The controller is in setting value The controller is not in
185 Grupo3 On[10]
area 3 setting value area 3
The controller is in setting value The controller is not in
186 Grupo4 On[10]
area 4 setting value area 4
Automatismo Self-healing Function
187 Self-healing Function Enabled
On[10] Disabled
Cierre
Self-healing Function Main Self-healing Function Main
188 Automatismo
Switch (RTa) Closing Started Switch (RTa) Closing Ended
RTa[10]
Cierre
Self-healing Function Section Self-healing Function Section
189 Automatismo
Switch (RTi) Closing Started Switch (RTi) Closing Ended
RTi[10]
Cierre Self-healing Function Link
Self-healing Function Link
190 Automatismo Switch (RTe) Closing
Switch (RTe) Closing Started
RTe[10] Completed
Apert. Self-healing Function Main
Self-healing Function Main
191 Automatismo Switch (RTa) Tripping
Switch (RTa) Tripping Initiated
RTa[10] Completed

16
 Apert. Self-healing Function Link
Self-healing Function Link
192 Automatismo Switch (RTe) Tripping
Switch (RTe) Tripping Initiated
RTe[10] Completed
Modo de Single Click Mode
193 Single Click Mode Initiated
Clic[10] Completed
Carga
194 Link Charging Completed Link Charging Incomplete
Enlace[10]
Desconexión Controller and Recloser Circuit Controller and Recloser
195
del Cable[10] Disconnection Circuit Wiring Normal
Sectionalizing Mode
196 SECC On[10] Sectionalizing Mode Enabled
Disabled
SECC Sectionalizer Count Tripping Sectionalizer Count Tripping
197
Apertura[10] Start End
Voltaje Lado
198 Power Side A Live Power Side A Dead
Fuente A[10]
Voltaje Lado
199 Power Side B Live Power Side B Dead
Fuente B[10]
Voltaje Lado
200 Power Side C Live Power Side C Dead
Fuente C[10]
Voltaje Lado
201 Load Side A Live Load Side A Dead
Carga A[10]
Voltaje Lado
202 Load Side B has voltage Load Side B has no voltage
Carga B[10]
Voltaje Lado
203 Load Side C has voltage Load Side C has no voltage
Carga C[10]
Oper. Synchronous protection action Synchronous protection
204
Sincrónica[10] initiated action ended
Rech.
205 Synchronous rejection started Synchronous rejection ended
Sincrónico[10]
Camb. Vida Contact A phase lifespan Contact A phase lifespan
206
Fase A[10] change started change ended
Camb. Vida Contact B phase lifespan Contact B phase lifespan
207
Fase B[10] change started change ended
Camb. Vida Contact C phase life change Contact C phase life change
208
Fase C[10] begins ends
Desgaste de
209 Contact wear begins Contact wear ends
Contactos[10]
GOS función GOOSE function switch to local GOOSE function switch to
210
cambiar[10] enabled local disabled
211 GOS On[10] GOOSE function enabled GOOSE function disabled
Desconex. Com. GOOSE communication GOOSE communication
212
GOS[10] disconnected normal
Falla Nodo
213 GOOSE node has a fault GOOSE node has no fault
GOS[10]

17
 Elim. Falla GOOSE fault isolation GOOSE fault isolation not
214
GOS[10] completed completed
Rech. Int. GOOSE switch refused to
215 GOOSE switch normal
GOS[10] operate
Bloq.
GOOSE overcurrent not
216 Sobrecorriente GOOSE overcurrent lockout
locked out
GOS[10]
Carga Elim. GOOSE fault isolation charging GOOSE fault isolation
217
Falla GOS[10] completed charging not completed
GOOSE power supply
Carga Recup. GOOSE power supply recovery
218 recovery charging not
Falla GOS[10] charging completed
completed
GOS Recibe GOOSE received load switch GOOSE did not receive load
219
Bloq[10] overcurrent lockout switch overcurrent lockout
220 Gos Trip[10] gos tripping start gos tripping end
221 Gos Cierra[10] gos closing start gos closing end
222 ACO On[10] ACO function enabled ACO function disabled
ACO
223 ACO tripping start ACO tripping end
Apertura[10]
224 ACO Cierra[10] ACO closing start ACO closing end
AUTOCOG
225 AUTOCOG closing start AUTOCOG closing end
Cierra[10]
Bajo Factor de Low power factor triggered Low power factor triggered
226
Potencia[10] fault start fault end
Botonera/Protec
227 Protection function enabled Protection function disabled
ción[10]
Estado Virtual
228 Simulation Sequence 1 start Simulation Sequence 1 end
1[10]
Estado Virtual
229 Simulation Sequence 2 start Simulation Sequence 2 end
2[10]
Estado Virtual
230 Simulation Sequence 3 start Simulation Sequence 3 end
3[10]
Estado Virtual
231 Simulation Sequence 4 start Simulation Sequence 4 end
4[10]
Teclado LCD
232 LCD Key 1 pressed LCD button 1 released
1[10]
Teclado LCD
233 LCD button 2 pressed LCD button 2 released
2[10]
Teclado LCD
234 LCD button 3 pressed LCD button 3 released
3[10]
Teclado LCD
235 LCD button 4 pressed LCD button 4 released
4[10]
236 Teclado LCD LCD button 5 pressed LCD button 5 released

18
 5[10]
Teclado LCD
237 LCD button 6 pressed LCD button 6 released
6[10]
Voltaje Lado
238 Power side has voltage Power side without voltage
Fuente[10]
Voltaje Lado
239 Load side with voltage Load side without voltage
Carga[10]
RTe
Interlock switch (RTe) recovery Interlock switch (RTe)
240 Recuperación[1
start recovery end
0]
Automatismo Self-healing primary switch Self-healing primary switch
241
RTa[10] (RTa) start (RTa) end
Automatismo Self-healing sectional switch Self-healing sectional switch
242
RTi[10] (RTi) start (RTi) end
Automatismo Self-healing connection switch Self-healing connection
243
RTe[10] (RTe) start switch (RTe) end
Protección Voltage protection element Voltage protection element
244
Tensión On[10] enabled disabled
Parámetros Calibration parameter has Calibration parameter has no
245
Anormales[10] abnormal values abnormal values
246 Repuesto[10] Spare Spare
247 Repuesto[10] Spare Spare
248 Repuesto[10] Spare Spare
249 Repuesto[10] Spare Spare
250 Repuesto[10] Spare Spare
251 Repuesto[10] Spare Spare
Luz Ind. AC power indicator
252 AC power indicator lit
Energía AC[10] extinguished
Luz Ind.
Self-check normal indicator
253 Autochequeo Self-check normal indicator lit
extinguished
OK[10]
Luz Ind.
254 Alarm indicator lit Alarm indicator extinguished
Alarma[10]
Luz Ind.
255 Error indicator lit Error indicator extinguished
Error[10]
Luz Ind. Alarma
256 Battery Alarm Light On Battery Alarm Light Off
Bat.[10]
Luz Ind. Volt.
257 Phase Voltage VA Light On Phase Voltage VA Light Off
Fase VA[10]
Luz Ind. Volt.
258 Phase Voltage VB Light On Phase Voltage VB Light Off
Fase VB[10]
Luz Ind. Volt.
259 Phase Voltage VC Light On Phase Voltage VC Light Off
Fase VC[10]

19
 Luz Ind. Volt.
260 Phase Voltage VX Light On Phase Voltage VX Light Off
Fase VX[10]
Luz Ind. Volt.
261 Phase Voltage VY Light On Phase Voltage VY Light Off
Fase VY[10]
262 Luz VZ[10] Phase Voltage VZ Lamp On Phase Voltage VZ Lamp Off
263 Luz OV[10] Overvoltage Lamp On Overvoltage Lamp Off
264 Luz UV[10] Undervoltage Lamp On Undervoltage Lamp Off
Luz
265 Remote Lamp On Remote Lamp Off
REMOTE[10]
266 Luz CLOSE[10] Closed Position Lamp On Closed Position Lamp Off
267 Luz OPEN[10] Open Position Lamp On Open Position Lamp Off
Phase A Overcurrent Indicator Phase A Overcurrent
268 Luz OC-A[10]
On Indicator Off
Phase B Overcurrent Indicator Phase B Overcurrent
269 Luz OC-B[10]
On Indicator Off
Phase C Overcurrent Indicator Phase C Overcurrent
270 Luz OC-C[10]
On Indicator Off
Zero Sequence/Overcurrent Zero Sequence/Overcurrent
271 OCG/OCS[10]
Indicator On Indicator Off
272 Luz ALT_P[10] ALT_P Indicator On ALT_P Indicator Off
273 Luz Secc.[10] Segment Indicator On Segment Indicator Off
274 Luz Bloq.[10] Locking Light On Locking Light Off
275 Luz UD1[10] UD1 Light On UD1 Light Off
276 Luz UD2[10] UD2 Light On UD2 Light Off
277 Luz UD3[10] UD3 Light On UD3 Light Off
278 Luz UD4[10] UD4 Light On UD4 Light Off
Luz Act. Protection Activated Light
279 Protection Activated Light On
Prot.[10] Off
Luz Act. Prot. Zero-sequence protection Zero-sequence protection
280
Seq. Cero[10] indicator light on indicator light off
Luz Act. Prot. Ground protection indicator Ground protection indicator
281
Tierra[10] light on light off
282 Luz ABR[10] ABR indicator light on ABR indicator light off
Luz
283 Reclosing indicator light on Reclosing indicator light off
Recierre[10]
284 Luz HLT[10] HLT indicator light on HLT indicator light off
285 Luz Rein.[10] Reset indicator light on Reset indicator light off
286 Repuesto[10] SECC Light On SECC Light Off
287 Repuesto[10] Manual Close Light On Manual Close Light Off
288 Repuesto[10] Manual Trip Light On Manual Trip Light Off
289 Repuesto[10] Spare Spare
290 Repuesto[10] Spare Spare
291 Repuesto[10] Spare Spare

20
2.2 Explanation of Real-time Analog Parameter

The values of these analog parameters will be updated in real-time, with the
purpose of monitoring the real-time analog quantities in the electric transmission lines.
The analog input points and counter in the DNP map are configured from these
parameters.
No. Name of Parameters Parameter Description
1 Uab[10] Line Voltage on the Power Side Uab Amplitude
2 Ubc[10] Line Voltage on the Power Side Ubc Amplitude
3 Uca[10] Line Voltage on the Power Side Uca Amplitude
4 Ua[10] Phase voltage on the power side Ua Amplitude
5 Ub[10] Phase voltage on the power side Ub Amplitude
6 Uc[10] Phase voltage on the power side Uc Amplitude
7 Urs[10] Line Voltage on the Load Side Urs Amplitude
8 Ust[10] Line Voltage on the Load Side Ust Amplitude
9 Utr[10] Line Voltage on the Load Side Utr Amplitude
10 Ur[10] Phase Voltage on the Load Side Ur Amplitude
11 Us[10] Phase Voltage on the Load Side Us Amplitude
12 Ut[10] Phase Voltage on the Load Side Ut Amplitude
Zero Sequence Voltage Amplitude on the Power
13 U0[10]
Side
14 U02[10] Zero Sequence Voltage Amplitude on the Load Side
15 Ia[10] A Phase Current Amplitude
16 Ib[10] B Phase Current Amplitude
17 Ic[10] C Phase Current Amplitude
18 I0[10] Zero Sequence Current Amplitude
19 P[10] Total Active Power
20 Q[10] Total Reactive Power
21 S[10] Total Apparent Power
22 COS[10] Total Power Factor
23 COS Calibración[10] This factor is used for controller power calibration
24 P_A[10] A Phase Active Power
25 P_B[10] B Phase Active Power
26 P_C[10] C Phase Active Power
27 Q_A[10] A Phase Reactive Power
28 Q_B[10] B Phase Reactive Power
29 Q_C[10] C Phase Reactive Power
30 S_A[10] A Phase Apparent Power
31 S_B[10] B Phase Apparent Power
32 S_C[10] C Phase Apparent Power
33 COS_A[10] A Phase Power Factor
34 COS_B[10] B Phase Power Factor

21
35 COS_C[10] C Phase Power Factor
36 Frecuencia[10] Voltage Frequency Value
37 Voltaje de Batería[10] Battery Voltage Amplitude
38 Temperatura[10] Internal Temperature of Controller
Diferencia de Angle difference between power side voltage and
39
Ángulo[10] load side voltage
Diferencia de Magnitude difference between power side voltage
40
Voltaje[10] and load side voltage
41 Energía kWh[10] Total Active Energy Value
42 Energía kWh_A[10] A Active Energy Value of Phase
43 Energía kWh_B[10] B Active Energy Value of Phase
44 Energía kWh_C[10] C Active Energy Value of Phase
45 Energía kVArh[10] Total Reactive Energy Value
46 Energía kVArh_A[10] A Reactive Energy Value of Phase
47 Energía kVArh_B[10] B Reactive Energy Value of Phase
48 Energía kVArh_C[10] C Reactive Energy Value of Phase
Line Voltage on the Power Side Uab With respect to
49 Ángulo Uab[10]
the phase voltage on the power side Ua Angle
Line Voltage on the Power Side Ubc With respect to
50 Ángulo Ubc[10]
the phase voltage on the power side Ua Angle
Line Voltage on the Power Side Uca With respect to
51 Ángulo Uca[10]
the phase voltage on the power side Ua Angle
Phase voltage on the power side Ua With respect to
52 Ángulo Ua[10]
the phase voltage on the power side Ua Angle
Phase voltage on the power side Ub With respect to
53 Ángulo Ub[10]
the phase voltage on the power side Ua Angle
Phase voltage on the power side Uc With respect to
54 Ángulo Uc[10]
the phase voltage on the power side Ua Angle
Line Voltage on the Load Side Urs With respect to
55 Ángulo Urs[10]
the phase voltage on the power side Ua Angle
Line Voltage on the Load Side Ust With respect to
56 Ángulo Ust[10]
the phase voltage on the power side Ua Angle
Line Voltage on the Load Side Utr With respect to
57 Ángulo Uts[10]
the phase voltage on the power side Ua Angle
Phase Voltage on the Load Side Ur With respect to
58 Ángulo Ur[10]
the phase voltage on the power side Ua Angle
Phase Voltage on the Load Side Us With respect to
59 Ángulo Us[10]
the phase voltage on the power side Ua Angle
Phase Voltage on the Load Side Ut With respect to
60 Ángulo Ut[10]
the phase voltage on the power side Ua Angle
Power Side Zero Sequence Voltage U0 With respect
61 Ángulo U0[10]
to the phase voltage on the power side Ua Angle
62 Ángulo U02[10] Load Side Zero Sequence Voltage U02 With respect

22
 to the phase voltage on the power side Ua Angle
A Phase current and phase voltage on the power side
63 Ángulo Ia[10]
Ua Angle
B Phase current and phase voltage on the power side
64 Ángulo Ib[10]
Ua Angle
C Phase current and phase voltage on the power side
65 Ángulo Ic[10]
Ua Angle
Zero Sequence Current and Phase Voltage on the
66 Ángulo I0[10]
Power Side Ua Angle
67 U1[10] Positive Sequence Voltage Amplitude
68 U2[10] Negative Sequence Voltage Amplitude
Ratio of Negative Sequence Voltage Amplitude to
69 U2/U1[10]
Positive Sequence Voltage Amplitude
70 I1[10] Positive Sequence Current Amplitude
71 I2[10] Negative Sequence Current Amplitude
Ratio of Negative Sequence Current Amplitude to
72 I2/I1[10]
Positive Sequence Current Amplitude
Corriente de falla When Overcurrent Occurs A Phase Current
73
A[10] Amplitude
Corriente de falla When Overcurrent Occurs B Phase Current
74
B[10] Amplitude
Corriente de falla When Overcurrent Occurs C Phase Current
75
C[10] Amplitude
Corriente de falla
76 Phase N Current Amplitude During Overcurrent
N[10]
Vida del contacto
77 Remaining Life of Phase A Contact
A[10]
Vida del contacto
78 Remaining Life of Phase B Contact
B[10]
Vida del contacto
79 Remaining Life of Phase C Contact
C[10]
Secuencia de
80 Action Sequence Count
Acción[10]
81 Distancia de Falla[10] Detected Fault Distance
Coeficiente
82 Real-Time Coefficient for Cold Load Pick-Up
Pickup[10]
Contadores de
83 Recloser Closing Operation Count
Operações[10]
84 Contadores UV-A[10] Phase A Low Voltage Fault Count
85 Contadores UV-B[10] Phase B Low Voltage Fault Count
86 Contadores UV-C[10] Phase C Low Voltage Fault Count
87 Contadores OV-A[10] Phase A Overvoltage Fault Count
88 Contadores OV-B[10] Phase B Overvoltage Fault Count

23
89 Contadores OV-C[10] Phase C Overvoltage Fault Count
90 Contadores 50A[10] Phase A Instantaneous Overcurrent Fault Count
91 Contadores 50B[10] Phase B Instantaneous Overcurrent Fault Count
92 Contadores 50C[10] Phase C Instantaneous Overcurrent Fault Count
93 Contadores 50N[10] Phase N Instantaneous Overcurrent Fault Count
94 Contadores 51A[10] Phase A Inverse Time Overcurrent Fault Count
95 Contadores 51B[10] Phase B Inverse Time Overcurrent Fault Count
96 Contadores 51C[10] Phase C Inverse Time Overcurrent Fault Count
97 Contadores 51N[10] Phase N Inverse Time Overcurrent Fault Count
Contadores Remote Control Tripping and Closing Operation
98
Control[10] Count
Contadores vida A
99 Phase A Lifetime Change Count
[10]
Contadores vida B
100 Phase B Lifetime Change Count
[10]
Contadores vida C
101 Phase C Lifetime Change Count
[10]
102 Contadores NPS[10] Negative Sequence Overcurrent Fault Count
Corriente de Corte
103 Phase A Cut-off Current Fault Count
A[10]
Corriente de Corte
104 Phase B Cut-off Current Fault Count
B[10]
Corriente de Corte
105 Phase C Cut-off Current Fault Count
C[10]
Power Quality A Amplitude of DC Flow of Phase
106 Ua flujo directo[10]
Voltage
Power Quality A Amplitude of Fundamental Wave
107 Ua 1ª Armónico[10]
of Phase Voltage
Power Quality Phase A Voltage Third Harmonic
108 Ua 3ª Armónico[10]
Amplitude
Power Quality Phase A Voltage Fifth Harmonic
109 Ua 5ª Armónico[10]
Amplitude
Power Quality Phase A Voltage Seventh Harmonic
110 Ua 7ª Armónico[10]
Amplitude
Power Quality Phase A Voltage Ninth Harmonic
111 Ua 9ª Armónico[10]
Amplitude
Power Quality Phase A Voltage Eleventh Harmonic
112 Ua 11ª Armónico[10]
Amplitude
Power Quality Phase A Voltage Thirteenth
113 Ua 13ª Armónico[10]
Harmonic Amplitude
Power Quality Phase A Voltage Fifteenth Harmonic
114 Ua 15ª Armónico[10]
Amplitude
115 THD Ua[10] The ratio of all harmonic amplitudes of power

24
 quality A phase voltage to the fundamental wave
amplitude
Power Quality B Amplitude of DC Flow of Phase
116 Ub flujo directo[10]
Voltage
Power Quality B Amplitude of Fundamental Wave
117 Ub 1ª Armónico[10]
of Phase Voltage
Power quality B phase voltage third harmonic
118 Ub 3ª Armónico[10]
amplitude
Power quality B phase voltage fifth harmonic
119 Ub 5ª Armónico[10]
amplitude
Power quality B phase voltage seventh harmonic
120 Ub 7ª Armónico[10]
amplitude
Power quality B phase voltage ninth harmonic
121 Ub 9ª Armónico[10]
amplitude
Power quality B phase voltage eleventh harmonic
122 Ub 11ª Armónico[10]
amplitude
Power quality B phase voltage thirteenth harmonic
123 Ub 13ª Armónico[10]
amplitude
Power quality B phase voltage fifteenth harmonic
124 Ub 15ª Armónico[10]
amplitude
Power quality B phase voltage all harmonic
125 THD Ub[10] amplitudes relative to the fundamental wave
amplitude ratio
Power Quality C Amplitude of DC Flow of Phase
126 Uc flujo directo[10]
Voltage
Power Quality C Amplitude of Fundamental Wave
127 Uc 1ª Armónico[10]
of Phase Voltage
Power quality C phase voltage third harmonic
128 Uc 3ª Armónico[10]
amplitude
Power quality C phase voltage fifth harmonic
129 Uc 5ª Armónico[10]
amplitude
Power quality C phase voltage seventh harmonic
130 Uc 7ª Armónico[10]
amplitude
Power quality C phase voltage ninth harmonic
131 Uc 9ª Armónico[10]
amplitude
Power Quality C Phase Voltage Eleventh harmonic
132 Uc 11ª Armónico[10]
amplitude
Power Quality C Phase Voltage Thirteenth harmonic
133 Uc 13ª Armónico[10]
amplitude
Power Quality C Phase Voltage Fifteenth harmonic
134 Uc 15ª Armónico[10]
amplitude
Power Quality C Phase Voltage all harmonic
135 THD Uc[10] amplitudes relative to the fundamental wave
amplitude

25
136 Ia flujo directo[10] Power Quality A Phase Current DC Flow amplitude
Power Quality A Phase Current Fundamental wave
137 Ia 1ª Armónico[10]
amplitude
Power Quality A Phase Current Third harmonic
138 Ia 3ª Armónico[10]
amplitude
Power Quality A Phase Current Fifth harmonic
139 Ia 5ª Armónico[10]
amplitude
Power quality A phase current seventh harmonic
140 Ia 7ª Armónico[10]
amplitude
Power quality A phase current ninth harmonic
141 Ia 9ª Armónico[10]
amplitude
Power quality A phase current eleventh harmonic
142 Ia 11ª Armónico[10]
amplitude
Power quality A phase current thirteenth harmonic
143 Ia 13ª Armónico[10]
amplitude
Power quality A phase current fifteenth harmonic
144 Ia 15ª Armónico[10]
amplitude
Power quality A phase current all harmonic
145 TDD Ia[10] amplitudes relative to the fundamental wave
amplitude ratio
146 Ib flujo directo[10] Power Quality B Phase Current DC Flow amplitude
Power Quality B Phase Current Fundamental wave
147 Ib 1ª Armónico[10]
amplitude
Power quality B phase current third harmonic
148 Ib 3ª Armónico[10]
amplitude
Power quality B phase current fifth harmonic
149 Ib 5ª Armónico[10]
amplitude
Power quality B phase current seventh harmonic
150 Ib 7ª Armónico[10]
amplitude
Power quality B phase current ninth harmonic
151 Ib 9ª Armónico[10]
amplitude
Power quality B phase current eleventh harmonic
152 Ib 11ª Armónico[10]
amplitude
Power quality B phase current thirteenth harmonic
153 Ib 13ª Armónico[10]
amplitude
Power quality B phase current fifteenth harmonic
154 Ib 15ª Armónico[10]
amplitude
The ratio of all harmonic amplitudes of B phase
155 TDD Ib[10] current in power quality to the fundamental wave
amplitude
156 Ic flujo directo[10] Power Quality C Phase Current DC Flow amplitude
Power Quality C Phase Current Fundamental wave
157 Ic 1ª Armónico[10]
amplitude

26
 Power Quality Phase C current Third harmonic
158 Ic 3ª Armónico[10]
Amplitude
Power Quality Phase C current Fifth harmonic
159 Ic 5ª Armónico[10]
Amplitude
Power Quality Phase C current Seventh harmonic
160 Ic 7ª Armónico[10]
Amplitude
Power Quality Phase C current Ninth harmonic
161 Ic 9ª Armónico[10]
Amplitude
Power Quality Phase C current Eleventh harmonic
162 Ic 11ª Armónico[10]
Amplitude
Power Quality Phase C current Thirteenth harmonic
163 Ic 13ª Armónico[10]
Amplitude
Power Quality Phase C current Fifteenth harmonic
164 Ic 15ª Armónico[10]
Amplitude
The ratio of all harmonic amplitudes of Phase C
165 TDD Ic[10] current to the fundamental wave amplitude in power
quality
166 Reserva[10] Spare
167 Reserva[10] Spare
168 Reserva[10] Spare
169 Reserva[10] Spare
170 Reserva[10] Spare
171 Reserva[10] Spare
172 Reserva[10] Spare

27
2.3 Explanation of Digital Output Parameters

These digital output parameters are used to remotely operate the recloser status.
The digital output points in the DNP map are configured from these parameters.
Parameter value is Parameter value is
NO. Name of parameters
“Cerrar” description “Abrir” description
1 Repuesto[0] Spare
2 Repuesto[0] Spare
3 Repuesto[0] Spare
4 Repuesto[0] Spare
5 Repuesto[0] Spare
LOGIC_DO1_LED1_
6 Reserved for logical programming
[0]
7 LOGIC_DO2_[0] Reserved for logical programming
8 LOGIC_DO3_[0] Reserved for logical programming
9 LOGIC_DO4_[0] Reserved for logical programming
Remote control for Remote control for
10 Disparo/Cierre[10]
one-time switch closing one-time switch tripping
Activación de Execute battery Stop battery discharge
11
Batería[10] discharge activation activation
Activar Prueba
12 Execute battery test Stop battery test
Baterias[10]
Release all locks and
Desbloquear y
13 restore all protection None
Reiniciar[10]
logic
Repuesto FH2
14 Spare
Espera[10]
15 Repuesto NACT[10] Spare
Repuesto Menudo
16 Spare
Cerrado[10]
Eliminar Reset all counter
17 None
Contadores[10] counts
Eliminar Energía
18 Reset all energy data None
Eléctrica[10]
Eliminar Corriente de Clear all short-circuit
19 None
Cortocircuito[10] currents
Protection function Protection function
20 Protección On[10]
enabled disabled
OC protection function OC protection function
21 OC On[10]
enabled disabled
EF protection function EF protection function
22 EF On[10]
enabled disabled
23 SEF On[10] SEF protection SEF protection function

28
 function enabled disabled
NPS protection NPS protection function
24 NPS On[10]
function enabled disabled
Frequency protection Frequency protection
25 Frecuencia On[10]
function enabled function disabled
Voltaje Protección Voltage protection Voltage protection
26
On[10] function enabled function disabled
PDPR protection PDPR protection
27 PDPR On[10]
function enabled function disabled
HLT protection HLT protection function
28 HLT On[10]
function enabled disabled
ABR protection ABR protection function
29 ABR On[10]
function enabled disabled
30 Repuesto[10] Spare
Reclosing (AR) Reclosing (AR) function
31 AR On[10]
function enabled disabled
Sectionalizer function Sectionalizer function
32 SECC On[10]
enabled disabled
AUTOCOG function AUTOCOG function
33 AUTOCOG On[10]
enabled disabled
Switch to protection
34 Grupo1 On[10] None
setting area 1
Switch to protection
35 Grupo2 On[10] None
setting area 2
Switch to protection
36 Grupo3 On[10] None
setting area 3
Switch to protection
37 Grupo4 On[10] None
setting area 4

29