https://www.edutvonline.

com

Cambridge International Examinations

Cambridge International General Certificate of Secondary Education
* 0 3 2 5 1 3 9 2 8 0 *

INFORMATION AND COMMUNICATION TECHNOLOGY 0417/02

Paper 2 Document Production, Data Manipulation and Presentations October/November 2018
2 hours 30 minutes
Additional Materials: Candidate Source Files.

READ THESE INSTRUCTIONS FIRST

Write your name, Centre number and candidate number in the spaces at the top of this page.
Write in dark blue or black pen.
Do not use staples, paper clips, glue or correction fluid.
DO NOT WRITE IN ANY BARCODES.
You must not have access to either the internet or any email system during this examination.

Carry out all instructions in each step. You can track your progress through the examination by crossing out
each question number.
Enter your name, Centre number and candidate number on every printout before it is sent to the printer.
Printouts with handwritten candidate details on will not be marked.
At the end of the examination, put this Question Paper and all your printouts into the Assessment Record
Folder.
If you have produced rough copies of printouts, put a neat cross through each one to indicate that it is not the
copy to be marked.

Any businesses described in this paper are entirely fictitious.

The number of marks is given in brackets [ ] at the end of each question or part question.

Write today’s date in the box below.

This syllabus is approved for use in England, Wales and Northern Ireland as a Cambridge International Level 1/Level 2 Certificate.

This document consists of 12 printed pages.

DC (LK/SW) 150230/3
© UCLES 2018 [Turn over
 https://www.edutvonline.com
2

You work for a company called Tawara Heritage Mining. You are going to perform some clerical tasks
for this company.

Task 1 – Evidence Document

• Open the file N218EVIDENCE.rtf

• Make sure that your name, Centre number and candidate number will appear on every page of
this document.
• Save this Evidence Document in your work area as N218EVIDENCE followed by your candidate
number, for example, N218EVIDENCE9999

You will need to place screenshots and answers to questions in this Evidence Document.

Task 2 – Document

You are going to edit an information sheet for Tawara Heritage Mining. The company uses a corporate
house style for all their documents. Paragraph styles should be created and applied as instructed.

1 • Using a suitable software package, open the file N218HISTORY.rtf

• The page setup is set to A4, landscape orientation with margins of 2 centimetres.
Do not make any changes to these settings.
• Save the document in your work area with the file name MINING
Make sure it is saved in the format of the software you are using.

EVIDENCE 1
Place in your Evidence Document a screenshot to show this file has been saved.
Make sure there is evidence of the file type.
[1]

2 • Remove any pre-set page breaks in the document. [1]

3 • Place your name, Centre number and candidate number right aligned in the header.
• Place in the footer:
• automated page numbers left aligned
• the automated file name and path right aligned.
• Make sure that:
• all the alignments match the page margins
• no other text or placeholders are included in the header and footer areas
• headers and footers are displayed on all pages. [2]

© UCLES 2018 0417/02/O/N/18

 https://www.edutvonline.com
3

4 • Create and store the following styles, basing each on the default paragraph style:

House Style Specifications

Enhancement

Space Before
Line spacing

Space After
Style Name

Font Style

Alignment
Font Size
(points)

(points)

(points)
THM-Title serif 36 right bold single 0 0
THM-Subtitle serif 18 left underline single 0 0
THM-Subhead sans-serif 16 centre underline, italic single 0 6
THM-Body serif 11 justified none single 0 12
THM-Table serif 11 centre none single 0 0

EVIDENCE 2
Take a screenshot to show that the style settings have been defined for the
THM‑Subhead paragraph style. Place this in your Evidence Document.
[3]

5 • Display these custom style names as a list in the style manager/organiser. Provide screenshot
evidence that these styles have been created, named and saved.

EVIDENCE 3
Take screenshot(s) to show the style names have been created and saved. Place
this in your Evidence Document.
[1]

6 • At the start of the document enter the title:

History of Tawara Mining
• Apply the THM‑Title style to this text. [2]

7 • Enter your name immediately after the subtitle Report produced by:
• Apply the THM‑Subtitle style to this text. [1]

8 • Apply the THM‑Body text style to the rest of the document. [1]

9 • Change the page layout so that the subheading Tawara Mining and all following text is
displayed in two equally spaced columns with 2 centimetre spacing between the columns.
[2]

© UCLES 2018 0417/02/O/N/18 [Turn over

 https://www.edutvonline.com
4

10 • Format the country items from

Russia – iron …
to
… China – gold, iron, bauxite, copper
to be a bulleted list with square bullets. [1]

11 • Format this list so the bullets are indented 1.5 centimetres from the left margin with no space
after each line. [1]

12 • Identify the 7 subheadings in the document and apply the THM‑Subhead style to each one.
[1]

13 • Open the file N218PRICELIST.csv and insert the contents as a table after the text
… Current metal prices are as follows: [1]

14 • Delete the column with the heading Year 2000 price per kg [1]

15 • Insert a new row at the end of the table.

• Enter the following text in the new row:

Metal name Price/kg Price/tonne Price low Price high

Nickel 11.27 10794.13 8.05 11.48
[1]

16 • Sort the data into ascending alphabetical order of metal name. [1]

17 • Format the first row of the table so it:

• is centre aligned over the five columns
• has a white, 14 point, sans-serif font
• is bold and italic
• has a black background. [3]

18 • Make sure that:

• the table fits within the column width
• the THM‑Table style is applied to rows 2 to 8
• the text in each cell does not wrap
• all borders and gridlines are displayed when printed. [2]

© UCLES 2018 0417/02/O/N/18

 https://www.edutvonline.com
5

19 • Import the image N218LOGO.png and place this below the subheading Tawara Mining [1]

20 • Format the image so that:

• it is re-sized to a width of 3.5 centimetres with the aspect ratio maintained
• it is aligned to the left margin and the top of the paragraph starting The first part of…
• the text wraps round the image.
It may look like this:

[2]

21 • Spell check and proofread the document.

• Make sure that:
• tables and lists are not split over two columns or pages
• there are no widows or orphans
• there are no blank pages
• the house style specification has been followed and the correct styles applied as
instructed
• spacing between all items is consistent.
• Save the document using the same file name and format as used in Step 1.
• Print the document.
PRINTOUT 1
Make sure your name, Centre number and candidate number are on your report.
[1]

[Total: 30]

© UCLES 2018 0417/02/O/N/18 [Turn over

 https://www.edutvonline.com
6

Task 3 – Database

You are now going to prepare some reports using related tables in a database. Make sure all currency
values display the same currency symbol of your choice and are set to 0 decimal places. Dates are to
be displayed in the format dd-MMM-yy.

22 • Import the file N218CUSTOMERS.csv into a suitable database package.

• Use these field names and data types:

Field Name Data Type Format

Title Text
First_Name Text
Cust_No Text
Last_Name Text
Add1 Text
Town Text
Postcode Text
Pay_Type Text
Memb_Date Date dd-MMM-yy e.g. 19-Jun-07
Memb_Type Text

• Set the Cust_No field as a primary key.

• Save the data.

EVIDENCE 4
Take screenshot evidence showing the field names and data types used in the table.
Place this screenshot into your Evidence Document.
[1]

23 • Import the file N218ORDERS.csv as a new table in your database.

• Make sure the Order_Value is formatted as currency.
• Set the Order_ID field as a primary key.
• Create a one-to-many relationship between Cust_No in the customers table and the Cust_ID
field in the orders table.

EVIDENCE 5
Place in your Evidence Document screenshot(s) showing the type of relationship
between the two tables.
[1]

24 • Create a columnar data entry form which will include all the fields from the orders table. The
field headings must be aligned to the left and positioned under each other.
• Make sure all the fields and data are fully visible and the layout is consistent.
• Enter an appropriate title at the top of the form. [2]

© UCLES 2018 0417/02/O/N/18

 https://www.edutvonline.com
7

25 • Use the form created in Step 24 to enter the following details as a new order:

Cust_ID THM0044
Order_ID T201
Order_Year 2017
Tin 4
Copper 2
Zinc 1
Lead 0
Order_Value 160

• Check your data entry for errors.

• Make sure all data is fully visible.
• Save the data.

EVIDENCE 6
Place in your Evidence Document a screenshot showing this data in your form.
[2]

© UCLES 2018 0417/02/O/N/18 [Turn over

 https://www.edutvonline.com
8

26 Tax of 20% is to be added to each order value.

• Using fields from both tables produce a report which:
• contains a new field called Gross_Value which is calculated at run time and displayed
as currency. This field will calculate the Order_Value plus 20% of the Order_Value
• shows only the records where:
- Order_Year is 2017
- Pay_Type contains Card
- Order_Value is 90 or more
• shows only the fields Cust_No, Title, First_Name, Last_Name, Order_ID, Order_Value,
Gross_Value and Pay_Type in this order with data and labels displayed in full. Do not
group the data
• sorts the data into descending order of Pay_Type and then ascending order of Order_
Value
• has a page orientation of landscape
• fits on a single page wide
• includes the heading Card payments in 2017 at the top of the page
• calculates the average Order_Value and places this number below the Order_Value
column
• displays the average value as currency
• has a label Average order value to the left of this value
• has your name, Centre number and candidate number on every page of the report.
• Save and print your report.

PRINTOUT 2
Make sure that you have entered your name, Centre number and candidate
number on your report.

EVIDENCE 7
Place in your Evidence Document a screenshot showing the formula used to
calculate the average order value.
[12]

27 • Export the report created in Step 26 as a text file for use in another application.
• Save the exported file in your work area.

EVIDENCE 8
Place in your Evidence Document a screenshot to show the exported file saved in
your work area. Make sure there is evidence of the file type.
[1]

© UCLES 2018 0417/02/O/N/18

 https://www.edutvonline.com
9

28 • Using fields from both tables you are going to produce some address labels which:
• contain only those records where:
– the membership type is Adult or Family
– the membership date is before 2015
– 3 or more tin ingots have been ordered.
• are sorted into ascending order of Last_Name
• Using this selection produce labels which:
• are arranged in 2 columns and 4 rows with 8 labels to the page, for example, each label
size 67.7 mm high × 99.0 mm wide (6.77 cm × 9.90 cm)
• display the fields in the positions shown in the following sample label:

Title First_Name Last_Name

Add1
Town Postcode
Memb_Date
Tin

• include a centre aligned heading, in a larger font size and bold, at the top of each label:
VIP Invitation!
• have your name, Centre number and candidate number at the bottom of each label.
• Save and print your labels.

PRINTOUT 3
Make sure that you have entered your name, Centre number and candidate
number on each label.
[7]

29 Answer the following questions in your own words and record your answers in your Evidence
Document:

(a) The Customers table contains a primary key. Explain why the Last_Name field would not be
appropriate as a primary key. [1]

When adding data to a field in the Customers table, it would be easier for a user to select data
from a list.

(b) Identify another advantage of selecting data from a list. [1]

(c) Identify two fields that would be most suitable for setting up as a list selection. [2]

EVIDENCE 9
Type your answers in your own words into your Evidence Document.

[Total: 30]

© UCLES 2018 0417/02/O/N/18 [Turn over

 https://www.edutvonline.com
10

Task 4 – Mail merge letter

You are required to carry out a mail merge to send invitation letters for the Tawara Mining open day.

30 • Create a mail merge letter using the file N218INVITE.rft as the master document and
N218DATA.csv as the data source.
• In the master letter replace the <Date> field with a field to display today’s date in the format
dd-MMM-yy

EVIDENCE 10
Take screenshot evidence showing the date field code. Place this screenshot into
your Evidence Document.
[1]

31 • In the master letter, maintain the existing spacing and punctuation, and replace the chevrons
and text each time they appear with the following merge fields from the data source:

Data to replace Replace with field

<TITLE> Title
<FIRST> First_Name
<LAST> Last_Name
<ADD1> Add1
<ADD2> Town
<ADD3> County
<POST> Postcode
<STAT> Status
<BON> Bonus
<REW> Reward
[2]

32 • Replace the text Candidate Name with your name.

• Include your name, Centre number and candidate number in the header of the document.
• Save the master letter. [1]

33 • Reflect the image so the ingot image looks like this:

• Save and print the master letter with the merge fields displayed.

PRINTOUT 4
Make sure that you have entered your name, Centre number and candidate
number on your master letter.
[1]
© UCLES 2018 0417/02/O/N/18
 https://www.edutvonline.com
11

34 • Set an automated filter to select only those members with a status of Elite

EVIDENCE 11
Place in your Evidence Document a screenshot to show the automated filter.
[1]

35 • Merge and print the letters for the selected members only.
• Save and close the files.

PRINTOUT 5
Make sure that you have entered your name, Centre number and candidate
number on your letters.
[1]

[Total: 7]

Task 5 – Presentation

You are going to create a short presentation.

All slides must have a consistent layout and formatting. Unless otherwise instructed, slides must
display a title and bulleted list.

36 • Create a presentation of 5 slides using the file N218WORLDMINES.rtf [1]

37 • Display the following features on all slides:

• the company logo N218LOGO.png positioned in the top right corner, appropriately sized
with aspect ratio maintained
• your name, Centre number and candidate number in the bottom left corner
• automatic slide numbers in the top left corner. [2]

38 • Using the data in the file N218TOPTEN.csv create a pie chart to compare the 2016 production
values for only the top 5 tin mining countries. [1]

39 • Format the chart to display:

• the title Top 5 Tin Mining Countries
• for each sector, the country name and production value only.
Do not display a legend. [2]

40 • Extract the sector for the largest producing country by pulling it away from the other countries.
[1]

41 • Place the chart to the left of the bullet points on the slide with the title Tin Mining
• Make sure that all data is displayed in full and no items overlap. [1]

© UCLES 2018 0417/02/O/N/18 [Turn over

 https://www.edutvonline.com
12

42 • Save the presentation.

• Print the presentation as a handout with 6 slides to the page.

PRINTOUT 6
Print this handout. Make sure your name, Centre number and candidate number
are on all slides.
[1]

• Print only the slide with the title Tin Mining. Make sure that this slide fills the full page.

PRINTOUT 7
Print this slide. Make sure your name, Centre number and candidate number are
on this slide.

[Total: 9]

43 Tawara are currently backing up their data onto a tape drive system. They are considering backing
up onto the cloud.

• Evaluate in your own words the use of the cloud to backup data compared to their tape drive
system.
• Recommend the most appropriate back up storage for Tawara Heritage Mining to use.

EVIDENCE 12
Type your evaluation and recommendation in your own words into your Evidence
Document using no more than 100 words.
[4]

[Total: 4]

Task 6 – Printing the Evidence Document

44 • Save and print your Evidence Document.

PRINTOUT 8
Make sure that you have entered your name, Centre number and candidate
number on your Evidence Document.

Permission to reproduce items where third-party owned material protected by copyright is included has been sought and cleared where possible. Every
reasonable effort has been made by the publisher (UCLES) to trace copyright holders, but if any items requiring clearance have unwittingly been included, the
publisher will be pleased to make amends at the earliest possible opportunity.

To avoid the issue of disclosure of answer-related information to candidates, all copyright acknowledgements are reproduced online in the Cambridge International
Examinations Copyright Acknowledgements Booklet. This is produced for each series of examinations and is freely available to download at www.cie.org.uk after
the live examination series.

Cambridge International Examinations is part of the Cambridge Assessment Group. Cambridge Assessment is the brand name of University of Cambridge Local
Examinations Syndicate (UCLES), which is itself a department of the University of Cambridge.

© UCLES 2018 0417/02/O/N/18