Onsemi Product Marking
Onsemi Product Marking
BRD8008/D
Rev. 0, Mar-2000
ON Semiconductor Part
Marking Transition Brochure
ON Semiconductor
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further
notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does
SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different
applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or
authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other
application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC
products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and
distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal
injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of
the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
EUROPE: LDC for ON Semiconductor - European Support JAPAN: ON Semiconductor, Japan Customer Focus Center
German Phone: (+1) 303-308-7140 (M-F 1:00pm to 5:00pm Munich Time) 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549
Email: [email protected] Phone: 81-3-5740-2745
French Phone: (+1) 303-308-7141 (M-F 1:00pm to 5:00pm Toulouse Time) Email: [email protected]
Email: [email protected]
English Phone: (+1) 303-308-7142 (M-F 12:00pm to 5:00pm UK Time) ON Semiconductor Website: http://onsemi.com
Email: [email protected]
EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 For additional information, please contact your local Sales
*Available from Germany, France, Italy, England, Ireland Representative
BRD8008/D
ON Semiconductor Part Marking Transition Brochure
BRD8008/D
Rev. 0, Apr-2000
© SCILLC, 2000
“All Rights Reserved”
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further
notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does
SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different
applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or
authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other
application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC
products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and
distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal
injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of
the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
EUROPE: LDC for ON Semiconductor - European Support JAPAN: ON Semiconductor, Japan Customer Focus Center
German Phone: (+1) 303-308-7140 (M-F 1:00pm to 5:00pm Munich Time) 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031
Email: [email protected] Phone: 81-3-5740-2745
French Phone: (+1) 303-308-7141 (M-F 1:00pm to 5:00pm Toulouse Time) Email: [email protected]
Email: [email protected]
English Phone: (+1) 303-308-7142 (M-F 12:00pm to 5:00pm UK Time) ON Semiconductor Website: http://onsemi.com
Email: [email protected]
EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 For additional information, please contact your local Sales
*Available from Germany, France, Italy, England, Ireland Representative
ii
Table of Contents
Introduction Letter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Notification / PCN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Marking Representation and Definition Diagram . . . . . . . . . . . . . . . . . . 4
Part Marking Cross Reference Tables, by Technology
Bipolar Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Rectifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Thyristors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Small-Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Zener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
MOS Gated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Line Power Analog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
General Purpose Analog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Battery Management Analog . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ECL - Emitter Coupled Logic . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Standard Logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
iii
iv
March 31, 2000
Greetings,
On August 5th, 1999 Motorola's former Semiconductor Components Group emerged as ON Semiconductor, an
independent company focused on standard discrete, logic and analog semiconductor products. As part of the terms of
separation ON Semiconductor was granted the ability to manufacture and sell Motorola logo-marked products for one year.
Per the terms of the agreement ON Semiconductor will cease placing the Motorola mark on product on August 5, 2000.
ON Semiconductor will continue to sell existing Motorola marked inventory until it is depleted or August 5, 2001. In place
of the Motorola “batwing” and other Motorola trademark markings, ON Semiconductor will begin marking products as
well as intermediate packaging with the ON Semiconductor logo (see sample representation included in this package)
beginning July 15, 2000. Even though no Motorola-marked product will be produced after August 5, 2000, we will
continue to ship existing inventory leading to the possibility of receiving mixed shipments containing both ON
Semiconductor and Motorola marked product.
This communication package has been developed to provide you detailed information regarding the transition from
Motorola marking to ON Semiconductor marking. Enclosed you will find the following:
There will be no change in the manufacturing process of the products and the new marking will not effect the
performance of the part in any way. We appreciate your continued support in helping us make ON Semiconductor the
premier semiconductor component manufacturer in the world.
Sincerely,
Bill George
http://onsemi.com
1
Part Marking Transition Brochure
NOTIFICATION / PCN
b ON Semiconductor
5005 E. McDowell Road
Phoenix, AZ 85008
Please read the following notification on the marking of http://onsemi.com
ON Semiconductor product, issued on Feb. 14, 2000.
1
**********************************************************************
1
GENERAL ANNOUNCEMENTS - MASTER FORMAT
**********************************************************************
NOTIFICATION #: 10143
SAMPLES: No
REFERENCE: USERID:
PHONE:
http://onsemi.com
2
ON Semiconductor
NOTIFICATION DATA
REFERENCE:JON WHITCOMB USERID:RHPF30
PHONE: 602-244-5394
DISCLAIMER
DESCRIPTION AND PURPOSE
-----------------------
ON Semiconductor will begin the changeover from the Motorola logo to
the ON Semiconductor logo for packaging materials on May 15, 2000
and for part marking on July 15, 2000. This General Announcement
affects all ON Semiconductor part numbers.
Motorola logos will be removed from bar code labels and will not be
replaced with the ON logo (ON Semi bar code labels will be "plain").
PART MARKING:
1
**********************************************************************
Where space is not an issue, the ON Semiconductor logo will be
placed on all devices.
PACKAGING MATERIAL:
http://onsemi.com
3
Part Marking Transition Brochure
Marking Representations
The white lines* within the representative diagram
below, define the path of the marking device required
to develop the ON Logo on the face of the package.
Due to the variation in each individual marking device,
the “line thickness” may vary relative to the size of
the logo. Tie bars may be visible when other marking
devices are used.
XXXX
ALYW
CCCC
http://onsemi.com
4
ON Semiconductor
BIPOLAR POWER
MARKED WITH ON LOGO PHOTO ON PAGE...
TO-3 METAL - BIPOLAR POWER 12
TO-3 METAL DUAL DIE - BIPOLAR POWER 12
TO-218/TO-3 PLASTIC 13
PBL TO-3 PLASTIC 13
TO-3 CUSTOM POWER 13
TO-247 PLASTIC 14
TO-220 ATLAS - BIPOLAR POWER 15
RECTIFIER
MARKED WITH ON LOGO PHOTO ON PAGE...
TO-218TO-3 PLASTIC 13
TO-247 PLASTIC 14
AXIAL LEAD - RECTIFIER 12
MICRO BUTTON - RECTIFIER 12
POWERTAP™ 2 - RECTIFIER 12
POWERTAP 3 - RECTIFIER 12
SURGE SUPRESSOR - RECTIFIER 12
SURMETIC™ 3 AMP- RECTIFIER 12
SUB-SURMETIC 3 AMP - RECTIFIER 12
SURMETIC 1 AMP - RECTIFIER 13
TOP CAN - RECTIFIER N/A
SUB SURMETIC 1 AMP - RECTIFIER 13
SURFACE MOUNT SURGE SUPRESSOR - RECTIFIER 12
T0-218 SCHOTTKY PLASTIC - RECTIFIER 13
RECTIFIER (cont.)
NOT MARKED WITH LOGO REFERENCE ON PAGE...
SMB - SURFACE MOUNT B 37MIL 22
SURFACE MOUNT A 22
CAN BUTTON - RECTIFIER N/A
SOD-123 N/A
JUMBO BUTTON - RECTIFIER N/A
TAB MOUNT - RECTIFIER N/A
POWERMITE™ N/A
THYRISTORS
MARKED WITH ON LOGO PHOTO ON PAGE...
SIDAC 3 AMP 12
SIDAC 1 AMP 15
TO-220 ATLAS - THYRISTOR 15
TO-220 CLIP MANUAL 16
TO-220 CLIP AUTO 16
TO-220 FULL PAK - THYRISTOR 16
SMALL SIGNAL
NOT MARKED WITH ON LOGO REFERENCE ON PAGE...
SOT-223 EUTETIC 20
TO-92 THYRISTOR/T. DIODE N/A
SOD-123 N/A
SOIC 16-LEAD 18
TO-92 GP 21
TO-92 SMALL SIGNAL 21
TO-92 1 WATT 21
SC-59 N/A
SOT-23 D N/A
SOT-23 LC N/A
SC-74 TRANSISTOR N/A
SC-70 N/A
SC-88 N/A
SOT-89 TRANSISTOR N/A
SC-75 N/A
SOT-23S N/A
SC-70 D N/A
TSOP-6 EPOXY N/A
TSOP-6 EUTETIC N/A
SOD-323 N/A
http://onsemi.com
6
ON Semiconductor
ZENER
MARKED WITH ON LOGO PHOTO ON PAGE...
SURMETIC 40 12
SURMETIC 40 CLIPPERS 12
SURMETIC 40 CLIPPER DUAL 12
MOSORB™ 13
MiniMOSORB™ 13
MOSORB DUAL 13
MiniMOSORB DUAL 13
MOSORB CLIPPER 13
MiniMOSORB CLIPPER 13
SURMETIC 30 15
MOS GATED
MARKED WITH ON LOGO PHOTO ON PAGE...
TO-247 PLASTIC 14
PBL TO-3 PLASTIC 13
TO-220 ATLAS - MOS GATED 15
TO-3 PLASTIC DUALDIE 13
TO-247 PLASTIC DUALDIE 14
PDIP 16-LEAD DUALDIE 14
D3PAK - TMOS N/A
http://onsemi.com
7
Part Marking Transition Brochure
Analog by Functionality
LINE POWERED ANALOG
MARKED WITH ON LOGO PHOTO ON PAGE...
PDIP 24-LEAD NARROW 12
PDIP 8-LEAD 14
PDIP 14-LEAD 14
PDIP 16-LEAD 14
PDIP 18-LEAD 14
CDIP 08-LEAD 14
TO-220 5-LEAD STRAIGHT 15
TO-220 5-LEAD STAGGER 15
PDIP 20-LEAD 15
SOIC 16-LEAD WIDE 16
SOIC 20-LEAD WIDE 16
SOIC 24-LEAD WIDE 16
http://onsemi.com
8
ON Semiconductor
BATTERY MANAGEMENT-ANAL0G
MARKED WITH ON LOGO PHOTO ON PAGE...
PDIP 8-LEAD 14
SOIC 20-LEAD WIDE 16
SOIC 24-LEAD WIDE 16
LQFP 32-LEAD .8P 1.4 7*7 17
TQFP 32-LEAD .8P 1.0T 7*7 17
http://onsemi.com
9
Part Marking Transition Brochure
STANDARD LOGIC
MARKED WITH ON LOGO PHOTO ON PAGE...
SOIC 20-LEAD WIDE 16
PDIP 14-LEAD 14
PDIP 16-LEAD 14
PDIP 24-LEAD NARROW 12
http://onsemi.com
10
ON Semiconductor
http://onsemi.com
11
Part Marking Transition Brochure
http://onsemi.com
12
ON Semiconductor
Photo
Unavailable
Photo
Unavailable
Photo Photo
Unavailable Unavailable
Photo
Unavailable
Photo
Unavailable
Photo
Unavailable
Photo
Unavailable
Photo
Unavailable
Photo
Unavailable
http://onsemi.com
20
ON Semiconductor
Both the Motorola logo and ON Semiconductor logo label stock are currently being used by internal manufacturing,
external manufacturing, and the global distribution centers. ON Semiconductor began the transition to no logo (blank)
labels on February 15, 2000. As ON Semiconductor logo label stock is depleted, transition to the no logo (blank) labels will
continue until completion on July 15, 2000. After July 15, only no logo (blank) labels will be used by ON Semiconductor.
ON Semiconductor Bar Code Labeling Requirements are being revised to incorporate the no logo (blank) label.
Customer Part Number (CPN) Labels Manufacturer Part Number (MPN) Labels
http://onsemi.com
23
Part Marking Transition Brochure
Box Marking
ON Semiconductor intermediate packing box graphics will begin changing May 15, 2000 and be completed by July 15,
2000. Below are sample representations of new intermediate packaging that will be used by ON Semiconductor. ON
Semiconductor Packaging requirements are being revised to incorporate the ON logo.
POWERTAP, ECLinPS, Mosorb, MiniMOSORB, Surmetic and ON-Demand CDROM are trademarks of Semiconductor Components Industries, LLC.
POWERMITE is a trademark of Microsemi Corporation. Micro8 is a trademark of International Rectifier.
All other brand names and product names appearing in this publication are registered trademarks or trademarks of their respective holders.
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further
notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does
SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different
applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or
authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other
application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC
products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and
distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal
injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of
the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
http://onsemi.com
24
504
BRD8008/D
Rev. 0, Mar-2000
ON Semiconductor Part
Marking Transition Brochure
ON Semiconductor
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further
notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does
SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different
applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or
authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other
application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC
products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and
distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal
injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of
the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
EUROPE: LDC for ON Semiconductor - European Support JAPAN: ON Semiconductor, Japan Customer Focus Center
German Phone: (+1) 303-308-7140 (M-F 1:00pm to 5:00pm Munich Time) 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549
Email: [email protected] Phone: 81-3-5740-2745
French Phone: (+1) 303-308-7141 (M-F 1:00pm to 5:00pm Toulouse Time) Email: [email protected]
Email: [email protected]
English Phone: (+1) 303-308-7142 (M-F 12:00pm to 5:00pm UK Time) ON Semiconductor Website: http://onsemi.com
Email: [email protected]
EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 For additional information, please contact your local Sales
*Available from Germany, France, Italy, England, Ireland Representative
BRD8008/D