Scribd
Upload
8 views

Three Wire Method

The document explains the Three-Wire Method for measuring the pitch diameter of threaded objects using standard micrometers and three wires of known diameter. It outlines the measurement process, calculation of pitch diameter, and provides wire sizes and constants for both American National Standard Unified and metric threads. Additionally, it emphasizes the importance of using the correct wire sizes and maintaining their condition for accurate measurements.

Uploaded by

Taner Demirel
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
8 views

Three Wire Method

The document explains the Three-Wire Method for measuring the pitch diameter of threaded objects using standard micrometers and three wires of known diameter. It outlines the measurement process, calculation of pitch diameter, and provides wire sizes and constants for both American National Standard Unified and metric threads. Additionally, it emphasizes the importance of using the correct wire sizes and maintaining their condition for accurate measurements.

Uploaded by

Taner Demirel
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Using the Three-Wire Method to Measure Threads

The pitch diameter of a threaded object can’t be measured directly except


with specialized thread micrometers. But using three wires of the same known
diameter, the thread pitch can be measured with a standard micrometer.
Chris’ Tip: This entire discussion is about 60° threads. Pee Dee Thread
Measuring Wires can be used to measure other threads (and tables for Acme
threads are included with the Pee Dee Thread Measuring Wires), but it changes
the formulas and constants. We are also talking about threads with a small lead
angle, so don’t try to use these formulas with double-start threads.
Machinery’s Handbook has information on using thread measuring wires on
many kinds of threads.

Making the Measurement


Let’s start by saying that it can be a little tricky handling three wires and a
micrometer all at the same time. There are several tricks of the trade that can
make it easier but learning to make the measurement without “accessories”
can ultimately be faster and more accurate.

Updated 1/30/2023 © 2023 LittleMachineShop.com Page 1 of 4


Here’s the process for taking a measurement.
1. Put a shop towel under the work area to catch the wires you drop.
2. Based on the pitch of the thread you are measuring, use the table below to
select the proper set of thread measuring wires.
3. Adjust your micrometer to about 0.010" larger than you expect your
measurement to be.
4. Put two wires in adjacent V’s on the bottom of the part. Use the fixed anvil
of the micrometer to hold them in place.
5. Now on the top of the part, slip the third wire into a V under the movable
anvil of the micrometer.
6. Take your micrometer measurement.
This process sounds harder than it is. I was successful on my second try.
Some people use grease on the threads, rubber bands or modeling clay over the
ends of the wires. Any of these tricks will take longer than the method above,
and they all can affect the accuracy of the measurement.

Calculating the Pitch Diameter


Now that you have your measurement, it’s a simple process to find the pitch
diameter.
1. Find the Constant for the thread pitch you are measuring from the chart
below. (Note that a compact version of this chart is included with the Pee
Dee Thread Measuring Wires.)
2. Subtract the constant from the measured value.
Here’s the formula:
E is the pitch diameter you are trying to find
M is the measurement you took
Const is the Constant value from the chart.
E = M – Const
The photo above is measuring a piece of ½"–13 threaded rod. The micrometer
reads 0.5112". So the formula is:
E = M – Const
E = 0.5112" – 0.06838
E = 0.4428"
A ½"–13 class 2A thread (commonly used for fasteners) should be between
0.4485" and 0.4435", but it is not surprising that threaded rod is somewhat
small.

Updated 1/30/2023 © 2023 LittleMachineShop.com Page 2 of 4


Chris’ Tip: You can find the pitch diameter of unified and metric screw threads
in Machinery’s Handbook and also in Machineries Handbook Pocket Companion.
Both of these books are available from LittleMachineShop.com

Wire Sizes and Constants


TPI Wire Size Const TPI Wire Size Const
48 0.018 0.03596 11.5 0.055 0.08969
44 0.018 0.03432 11 0.055 0.08627
40 0.018 0.03235 10 0.055 0.07840
36 0.018 0.02994 9 0.063 0.09277
32 0.024 0.04494 8 0.072 0.10775
28 0.024 0.04107 7.5 0.081 0.12753
27 0.024 0.03992 7 0.081 0.11928
24 0.029 0.05092 6 0.092 0.13166
20 0.029 0.04370 5.5 0.108 0.16654
18 0.032 0.04789 5 0.120 0.18679
16 0.040 0.06587 4.5 0.127 0.18855
14 0.040 0.05814 4 0.143 0.21249
13 0.045 0.06838 3.5 0.185 0.30756
12 0.055 0.09283 3 0.185 0.26632

How Does This Work?


In theory, you are measuring with wires of a known diameter that contact the
threaded part on the pitch line. As with most things in life, actual practice
involves compromises.
There are three formulas for calculating appropriate wire sizes:
Smallest wire diameter = 0.56 × Pitch
Largest wire diameter = 0.90 × Pitch
Diameter for pitch-line contact = 0.57735 × Pitch
If you do the math, you will find that all the suggested wires in the table above
are between the smallest and largest values.

Updated 1/30/2023 © 2023 LittleMachineShop.com Page 3 of 4


The thread pitch for an American National Standard Unified 60° thread is:
E = M + 0.86603P – 3W
Notice that if we know the pitch (P) and the wire diameter (W), then for any
particular pitch, the formula reduces to:
E = M – Const
where Const is a constant for a particular pitch and wire size combination.
These are the constants given in the table above.
Take a look at the first formula for a moment. The value 0.86603 is a constant
because we are only considering 60° threads. It encapsulates some
trigonometry involving the thread angle.
The 3W term is the interesting one. It highlights the fact that your thread
measuring wires must be the correct size. Any error in the wires is magnified
three times. There is more to consider than wire diameter. Bent, distorted, or
dirty wires will also affect the measurement. (Rubber bands, anyone?)

Metric Threads
Metric threads are also 60° threads so these formulas work just as well with
them. The following table shows the wires and constants for common metric
threads. These constants assume you are working in millimeters, not inches.
Pitch Wire Size Const
0.5 0.018 0.93859
0.6 0.018 0.85198
0.7 0.018 0.76538
0.75 0.024 1.17928
0.8 0.024 1.13598
1 0.029 1.34377
1.25 0.032 1.35586
1.5 0.040 1.74896
1.75 0.040 1.53245
2 0.045 1.69694
2.5 0.063 2.63553
3 0.072 2.88831
3.5 0.081 3.14110
4 0.092 3.54628
4.5 0.108 4.33247
5 0.120 4.81385
5.5 0.127 4.91424
6 0.143 5.70042
8 0.185 7.16876

Updated 1/30/2023 © 2023 LittleMachineShop.com Page 4 of 4

You might also like