Content

SLE CHARACTERISTICS
SLE The SLE is available as SLA with aluminiumin T- or slot-
profile, as SLE with plastic inserts or plastic slot profile, as

Design guidelines
SLE applications 81 SLS with foam slot profile, as SLP with plastic divider PZ
SLE dimensions 82 or as SLR with pipe or roll stays.
SLE types 84
SLA SLE SLS
SLE sizes 86
SLE parts 87

Order infos
SLE assembly 88
SLE connectors 83
SLE part numbers 92 SLP SLR
SLE accessories 98

Kolibri
closed + open In steel, stainless steel and hardened material is the steel

PKK
chain in case of large free carrying lengths, large quantities
of cables and heavy-duty hydraulic hoses first choice.

stay distributions in many variants

SLE SLP SLA PLE PLP PLA

stay fast assembly and disassembly
8 16 24 32 40 simple shortening and lengthening
60 shroud protecting pivot mechanics
load / (kg/m)

max. travel distance with 2 rollers

LOAD DIAGRAM
50 SLE
Lf
Travel
40 The maximum travel distance is determined by the
arrangement and the additional weight (line weight). At
30 normal arrangement the maximum travel is twice the free

GKA
carrying length. Support rollers or similar constructive steps
20 can increase this value.
In gliding arrangement travel distances up to 100 meters are
SL

possible (application dependent).

SL
SL

SL

SL

10
E

E
E
E

Exceeding this value additional constructive action is

62
52
22
12

32

SFK
needed (see design guidelines).
0
0
0
0

0
0 2 4 6 8 10
free carrying length Lf / (m)
Travel speed

PFR
The standard and the stainless steel design is limited at
1m/s. Exceeding this and high dynamic loads caused by
e.g. vibrations or high number of cycles require the use of
application fields the hardened (carburised) material.
inner height / (mm)

118
115 strong Troughs
tough
SLE
PLE max. 6 m free carrying max. 10 m Acceleration
free carrying
Systems

80 inexpensive,universal The acceleration in principle is not limited. Limits are

achieved, by very long chains and line weight that cause
PKK max. 5 m extreme tensile forces.
free carrying
50
inexpensiv, light
MARATHON
ALLROUND

Temperature
ELTOLA

30
Kolibri
max. 3 m The long term operating temperature is -20 °C to 600 °C
16
Materials

free carrying (-40 ° C stainless steel to 600 ° C).

7
7 30 205 300 (1000) Special types
inner width / (mm)
Informations

Stainless Steel
Carburised (hardened)
80 01/2023
 Content
SLE APPLICATIONS

Design guidelines
Order infos
Kolibri
PKK
SLE SLP SLA PLE PLP PLA
machine tools
mills
Werkzeugmaschinenbau,
special machinery
Handhabungstechnik,
wood processing industry
Förder- und Hebetechnik
conveying and lifting equipment

GKA
SFK
PFR
Troughs
Systems
MARATHON
ALLROUND
ELTOLA
Materials
Informations

01/2023 81
 Content
SLE DIMENSIONS
stay length + 2f B
e
nc

Design guidelines
stay length f ta
l dis
k a ve
r
xt

m
.
0.5 ch
pit

n
sio

Order infos
n
ete
pr
L
t th
ng
a
c

le R
.0 .5

Kolibri
R a pp
H

(see p.96)
F pretension:

PKK
slider 5mm/m
e
stay length + 2l

SLE SLP SLA PLE PLP PLA

the usable interior width is stay length - 2(e-f)

SLE pitch a c e f g h k l1) m o p t weight [kg/m]

120, 121, - , 128 50 20 35 10 6 7,5 7 1 9 7 10 20 4 2.3
220, 221, 225, 228 75 31 50 14 8 12 9 1,5 13 9 12 30 4 4.3 ( 5.8)
320, 321, 325, 328 100 49 75 17 11 17 11 2 18 12 12 50 4 7.9 ( 9.6)
520, 521, 525, 528 125 68 100 23.5 14 22 13 3 20 15 12 70 4 15.1 (16.9)
620, 621, 625, 628 175 118 150 23.5 14 26 13 3 20 15 24 115 8 19.3 (20.9)

GKA
the weight is given for the standard type with with a stay length of 100, values in brackets for closed version
1) stay length + 2l is the width of the chain with sliders

bending radius R [mm]

SFK
120, 121, - , 128 60 100 150 250
220, 221, 225, 228 100 150 200 250 300
320, 321, 325, 3281) 150 200 250 300 400

PFR
520, 521, 525, 5281) 200 250 300 400 500
2) 1)
620, 621, 625 628 250 300 400 500 600
1) SLE 328 from R200, SLE 528 from R250, SLE 628 from R300 2) SLE 625 from R300
Troughs
the stay lengths are offered in steps of 1 mm
stay length SLE plastic inserts Ø [mm]
120, 121, - , 128 40 ... 800
Systems

220, 221, 225, 228 50 ... 900 10 15 20 25 30

320, 321, 325, 328 60 ... 1000 10 15 20 25 30 35 40 45 50
520, 521, 525, 528 70 ... 1200 10 15 20 25 30 35 40 45 50 55 60 65 70
MARATHON
ALLROUND
ELTOLA

620, 621, 625, 628 100 ..1200

Materials

order example: travel distance 3 m, bending radius 200 mm,

cables: 1x15 mm, 8x8 mm, 3x12 mm, 2x22 mm, normal arrangemet
SLP 220 / 200 x 2325 / 200 /N/N 1) / 5 PZ 1 PT55
Informations

type / radius x length / stay length / connectors / arrangement / stay distribution

1) 1. fixed connector / 2. moving connector

82 01/2023
 Content
SLE CONNECTORS
Normal connector in outer radius connector E in inner radius

Design guidelines
sta
g yl
en
gth

Order infos
o

Kolibri
h

PKK
connector
SLE screws

120 M6

SLE SLP SLA PLE PLP PLA

220 M8
320 M10
520 M12
620 M12

connector A connector B

GKA
SFK
PFR
connector dimension = staylength - 2g
connector dimension = staylength + 2g + 4k
Troughs

connector C in outer radius connector D in inner radius

Systems

sta
y l en
gth
MARATHON
ALLROUND
ELTOLA
Materials
Informations

special connectors with customer

dimensions are available

01/2023 83
 Content
SLE TYPES

SLE 120, 220, 320, 520, 620

Design guidelines
The standard type is build with stays in every second chain
link. The steel link energy chains can be opened in the inner
and in the outer bending radius.

Order infos
order example
SLP 120 / 100 x 2050 / 100 / D / E / h / 2PZ
type radius length stayw. connect. arran. stay dist.

Kolibri
SLE 121, 221, 321, 521,621
These designs are made with stays in each link. This

PKK
increases the lateral stability and improves the guiding
particularly of smaller diameter lines.

SLE SLP SLA PLE PLP PLA

order example
SLP 321 / 100 x 3100 / 200 / N / N / n / 5PZ, 3PT
type radius length stayw. connect. arran. stay dist.

SLE 225, 325, 525, 625

GKA
The closed types offer optimum protection of the lines
against dust and cuts or other enviromental influences. At
higher temperatures the covers Silver Star provide

SFK
excellent protection.
The closed types also may be built to replace the standard
version stay.

PFR
order example
SLP 225 / 200 x 2550 / 150 / N / N
type radius length stayw. connectors
Troughs

SLE 128, 228, 328, 528, 628

Systems

These types are suitable for long travel, the upper strand
slides on the lower strand. For greater stability these energy
chains are build with stays in each link. The energy chains
are fitted with sliders, which have a very low coefficient of
MARATHON
ALLROUND

friction (µ = 0.2 to 0.25).

ELTOLA

After reaching the wear limit the slider can be renewed and
the energy chain will continue.
Materials

order example
SLP 328 / 200 x 45000 / 250 / N / N / g / 3PZ
Informations

type radius length stayw. connect. arran. stay dist.

84 01/2023
 Content
SLE TYPES
Compared to standard chains the SLE series is characterized by the fact that the sturdy aluminium profile can be
steplessly adapted to the requirements. Stay lengths of up to 1500 mm can be provided. The subdivision of the

Design guidelines
interior satisfies every requirement and guarantees optimized cable protection, even at very high accelerations and
travel speeds.

The SLA (SLE with aluminum T-profile or aluminium slot-

profile) is a highly customized and robust energy chain,
which is chosen primarily for larger dimensions. The stays

Order infos
are milled in accordance with the requirements of the user
with individual hole patterns.

For extreme applications, the variants SLA, SLS and SLE

should be preferred, since these offer optimize cable

Kolibri
guiding.
In the case of high speed and acceleration a multi-layer
arrangement of the cable should be avoided.

PKK
The SLE (SLE with plastic inserts or plastic slot-profile)
ensures at high speeds a perfect guide and almost excludes
errors during installation of the lines. With this design the

SLE SLP SLA PLE PLP PLA

hole pattern of the stays can be adjusted accurately to the
needs of the lines. Plastic inserts are available in a 5 mm
grid. The plastic slot-profile can be ordered to suit special
requirements.

For limited installation space, the SLS (SLE with foam slot-

GKA
profile) are used. Again, the optimal guiding of the lines at
high speeds and acceleration is ensured. Well-known
automotive manufacturers have used this type for years
with the best experiences. All lines lie in the neutral axis of

SFK
the energy chain.

PFR
For space reasons, the SLP (SLE with plastic divider PZ and
others) can be selected. This inexpensive design allows the
guiding of large amounts of cable. The highly variable
Troughs
distribution possibility through small steps of (3mm) in
height, plus the Telescopic divider (PT) allows maximum
space for all needs, even when changes in cable diametres
are required.
Systems
MARATHON
ALLROUND

The SLR (SLE with a pipe or roll stays) is manufactured only

ELTOLA

upon request. The pipe stay allows special material

combinations, such as the exclusion of aluminum or the use
of stainless steel and brass. The roll bar has advantages
Materials

particularly for heavy lines with high friction and wear in

terms of durability of the cables and hoses: Relative
movements on the energy chain are compensated by the
rolling motion of the stays.
Informations

01/2023 85
 Content
SLE SIZES

SLE 120

Design guidelines
standard type
height: 35 width: 52 ... 812
inner height: 20 inner width: 32 ... 792
stay length: 40 ... 800

Order infos
SLE 220
standard type
height: 50 width: 66 ... 916

Kolibri
inner height: 31 inner width: 38 ... 888
stay length: 50 ... 900

PKK
SLE SLP SLA PLE PLP PLA
SLE 320
standard type
height: 75 width: 80 ... 1020
inner height: 49 inner width: 50 ... 990
stay length: 60 ... 1000

GKA
SLE 520

SFK
standard type
height: 100 width: 98 ... 1028
inner height: 68 inner width: 54 ... 1184
stay length: 70 ... 1500

PFR
Troughs

SLE 620
Systems

standard type
height: 150 width: 128 ... 1228
inner height: 118 inner width: 84 ... 1184
stay length: 100 ... 1500
MARATHON
ALLROUND
ELTOLA
Materials
Informations

86 01/2023
 Content
SLE PARTS
item name

1 link

Design guidelines
2 connector link single
3 connector link double
4 connector angle
5 flange bolt
6 radius bolt
7 cover plate
8 retaining ring

Order infos
9 aluminum C-profile
10 serrated screw
11 plastic (vertical) divider 3
24
12 outer cover
13 distance filler 22

Kolibri
14 inner cover
15 band holder
16 band (steel / stainless steel)
17 threaded bolt 23
18 lock washer 9

PKK
19 locknut 21
20 plastic inserts
21 foam

SLE SLP SLA PLE PLP PLA

22 slider
20
23 aluminium-T-profile
24 pipe stay
25 flange rollers

25
11

18
19

GKA
17

10

SFK
8
5
16
7

PFR
6
15
1
2
Troughs
4

14
Systems

13
MARATHON
ALLROUND
ELTOLA

The use of steel chains with steel bands (16) is limited to

energy chains with a maximum length of 6 m and stay length
Materials

of 600 mm. For reasons of rigidity longer energy chains

have to be build by using the silver star covers.
12
A later equipment with steel bands is not possible. Steel
Informations

bands have to be listet in the order of the energy chain (see

page 92 bottom).

01/2023 87
 Content
SLE ASSEMBLY

Packaging

Design guidelines
ekd energy chains are supplied in secured device
packaging. When removing the packaging and moving the
energy chains or parts of them, ensure that the energy
chains are free of torsion and tension to avoid mechanical
8
damage.
7

Order infos
Lengthening or shortening
5 If energy chains are delivered in pieces, proceed with the

Kolibri
6 installation as follows:
Push the link together (1) and insert the flange bolts (5) with
a shroud (7) in the chain outside. Then build the radius by
inserting the radius bolts (6) (see chart for correct radius).
Finally put on the inner shroud (7) and fit the retaining ring

PKK
(8). Roll the energy chain to check that the radius is correct
throughout its length.

Shortening in the reverse order:

SLE SLP SLA PLE PLP PLA

Loosen the retaining rings (8), pull out the flange bolts (5),
17 lifting the shroud (7), pull the radius bolts (6) and remove the
links (1).
Energy chains with threaded bolts instead of the retaining
rings (8), first unlock the locking plates (18) to solve the
19 locknuts (19). Thereafter, the threaded bolts (17) and pins
(6) can be removed and taken from the links (1).

18

GKA
Implement the connector angle
The connector angles (4) are orientated to the outer radius

SFK
and to the chain center (normal end mounted). By loosening
the retaining rings (8), drag the flange bolts (5), lift off the
shroud (7) and pull the radius bolts (6) the connector angles
(4) can be disassembled and placed in a different position.

PFR
Troughs

4
Bending radius
Loosen the retaining rings (1) and lift off the shrouds (7).
Systems

Implement the radius bolts (6) according to table (page 89).

Then mounting the shrouds (7) and retaining Rings (1).
The detachable bolts position for the different radii can be
3 found engraved on the double connector links (3).
connector link
MARATHON
ALLROUND
ELTOLA
Materials

radii marking
Informations

[cm]

88 01/2023
 Content
SLE ASSEMBLY
flange bolt
assembly of radius bolts radius bolt

Design guidelines
shroud

SLE 120 220 320 520 620 retaining ring

(marking in the

Order infos
outer radius)

radius 60 100 150 200 250

Kolibri
the minimum radius is
built with only 2 bolts

PKK
(marking in the
outer radius)

SLE SLP SLA PLE PLP PLA

radius 100 150 200 250 300

GKA
(marking in the
outer radius)

SFK
radius 150 200 250 300 400

PFR
(marking in the
inner radius)
Troughs

radius 250 250 300 400 500

Systems
MARATHON
ALLROUND
ELTOLA

(marking in the
inner radius)
Materials

radius - 300 400 500 600

Informations

01/2023 89
 Content
SLE Assembly

10 9
Stay removal

Design guidelines
The stays (9) are fastened with serrated screws (10) to the
links (1). They can be removed by unscrewing the four
screws (10).
Stay lengths up to 600 mm are available with quick
assembly.

Order infos
Kolibri
PKK
10 9
Quick assembly
bly In quick assembly only two screws must be tightened or
em

SLE SLP SLA PLE PLP PLA

a ss loosed. The stays (9) are moved with the groove on the rivet
u ick l t and the serrated screw (10) snapped in the recess and
q bo
et tightened.
riv

g
n tin
ou
a lm

GKA
rm
no

SFK
10 Cover Silver Star
13 The covers of the closed version can be removed like the

PFR
stays by loosening the four serrated screws (10). The
spacers (13) remain on the links.

Troughs
Systems

- -

inner band
Stainless steel bands
MARATHON
ALLROUND
ELTOLA

end mounting To protect the lines against external damage

and pollution the chains can be equiped with steel or
stainless steel bands in the inner and outer radius. The
Materials

edges of the steel bands are circular smoothed to avoid

band clip injury. Stainless steel and steel bands are fastened with
band holders screwed on sides and with screwed
connections on each end of the chain.
Informations

outer band

90 01/2023
 Content
SLE ASSEMBLY

Final assembly

Design guidelines
The installation height should not fall below the level H = (50 B
plus two times bend radius plus link height).
The pretension of cable carrier is taken into account with the
additional space of 50 mm.

First fasten fixed connection (F) and then mount the

Order infos
movable connection using the specified bolt size (see SLE
connec-tors).
Compliance with the maximum free carrying length is of vital 50
importance for the life time of the energy chain, both during
the installation as well as when operational. Over travel of

Kolibri
the energy chain can lead to damage and premature wear.

If the energy chain is provided with support elements, the t

assembly of these must take place before the installation of e ig h
2R k h

PKK
the chain in order to avoid even a short-term stress point. l i n
+
F
An energy chain may never exceed the free carrying length ch
without support rollers. wi ain-

SLE SLP SLA PLE PLP PLA

d
+ th
The height of the moved connector must be adjusted so that 50
the connector link is moving with a maximum of 5 mm
distance from the base of the supporting roller.

GKA
.5
ax
m

SFK
LV
25
0.

PFR
al
m
ini
m

Troughs
Maintenance of the energy chain
PLE energy chains are maintenance free. Like every
Systems

mechanical system this will depend on the ambient

conditions so wear will occur which must be observed.

In case of the energy chain has to be exchanged.

MARATHON
ALLROUND

For long travels or in a circular motion, the energy chains are

ELTOLA

often equipped with sliding elements. These allow sliding of

the upper part of the chain on a suitable surface (eg, slider-
slider, slider-steel, glide bar).
Materials

The sliders wear depends on the application. The slider

surfaces should be checked at regular intervals. With a
thickness of 1-2 mm sliders have to be replaced.
Informations

01/2023 91
 Content
SLE PART NUMBERS
SLE parts 87 1 4 2 3

Design guidelines
SLE link connector link single connector link double connector angle

special material parts like Ul94 V-0, EX or

other have to be named in the order

Order infos
R 60, 100, 150, 250
galv. carbur. Stainl.steel galv. carbur. Stainl.steel galv. carbur. Stainl.steel galv. carbur. stainl.steel

120 0110 - 1806 0104 - 1734 0105 - 1736 0064 - 1732

121 0110 - 1806 0104 - 1734 0105 - 1736 0064 - 1732

Kolibri
128 0110 - 1806 0104 - 1734 0105 - 1736 0064 - 1732

PKK
R 100, 150, 200, 250, 300
galv. carbur. Stainl.steel galv. carbur. Stainl.steel galv. carbur. Stainl.steel galv. carbur. stainl.steel

220 0117 0821 1739 0115 - 1735 0116 - 1737 0114 - 1733

SLE SLP SLA PLE PLP PLA

221 0117 0821 1739 0115 - 1735 0116 - 1737 0114 - 1733
225 0117 0821 1739 0115 - 1735 0116 - 1737 0114 - 1733
228 0117 0821 1739 0115 - 1735 0116 - 1737 0114 - 1733

R 150, 200, 250, 300, 400

GKA
galv. carbur. Stainl.steel galv. carbur. Stainl.steel galv. carbur. Stainl.steel galv. carbur. stainl.steel

320 1890 1725 1726 0145 1720 0146 1721 0144 1719
321 1890 1725 1726 0145 1720 0146 1721 0144 1719
325 1890 1725 1726 0145 1720 0146 1721 0144 1719

SFK
328 1890 1725 1726 0145 1720 0146 1721 0144 1719

PFR
R 200, 250, 300, 400, 500
galv. carbur. Stainl.steel galv. carbur. Stainl.steel galv. carbur. Stainl.steel galv. carbur. stainl.steel

520 0175 1727 1730 0173 1689 0174 1690 0172 1536
521 0175 1727 1730 0173 1689 0174 1690 0172 1536 Troughs

525 0175 1727 1730 0173 1689 0174 1690 0172 1536
528 0175 1727 1730 0173 1689 0174 1690 0172 1536
Systems

R 250, 300, 400, 500, 600

MARATHON
ALLROUND
ELTOLA

galv. carbur. Stainl.steel galv. carbur. Stainl.steel galv. carbur. Stainl.steel galv. carbur. Stainl.steel

620 1891 - 0877 0876 0884

621 1891 - 0877 0876 0884
Materials

625 1891 - 0877 0876 0884

628 1891 - 0877 0876 0884
Informations

Standard-links are producec without band clip cut out. Energy chains with band cover have to be
ordered with the following article numbers: SLE 320 0147 , SLE 520 2004 , SLE 620 0878

92 01/2023
 Content
SLE PART NUMBERS AS
I (in
ne
rr
ad
iu
s) SLE parts 87
AS
A 12 14 13 10
7 8 6 5 9 (o
ut

Design guidelines
er
ra
diu
s)

SLE shroud retaining ring radius bolt flange bolt C-profile T-profile ASA / ASI distance filler serrated screw

St VA St CuSn St VA links rechts

Order infos
120 - 1805 0109 - 0106 - 0108 - 0692 - - - - - 0127 (M4x12)
121 - 1805 0109 - 0106 - 0108 - 0692 - - - - - 0127
128 - 1805 0109 - 0106 - 0108 - 0692 - - - - - 0127

Kolibri
PKK
220 0119 0137 0118 0136 0120 0121 0122 0134 0124 0141 - - - - 0127 (M4x12)
221 0119 0137 0118 0136 0120 0121 0122 0134 0124 0141 - - - - 0127

SLE SLP SLA PLE PLP PLA

225 0119 0137 0118 0136 0120 0121 0122 0134 - - 1065 1066 1670 1404 0127
228 0119 0137 0118 0136 0120 0121 0122 0134 0124 0141 - - - - 0127

320 0149 0166 0148 1247 0150 0151 0152 0165 0154 0171 - - - - 0157 (M5x14)

GKA
321 0149 0166 0148 1247 0150 0151 0152 0165 0154 0171 - - - - 0157
325 0149 0166 0148 1247 0150 0151 0152 0165 - - 0847 0846 1293 1671 0157
328 0149 0166 0148 1247 0150 0151 0152 0165 0154 0171 - - - - 0157

SFK
PFR
520 0177 0193 0176 0192 0178 0179 0180 1529 0182 0194 - - - - 0185 (M6x18)
51
0 28
15 0177 0193 0176 0192 0178 0179 0180 1529 0182 0194 515: 0849 0848 1620 1672 0185
525 0177 0193 0176 0192 0178 0179 0180 1529 - - 0849 0848 1405 1673 0185
528 0177 0193 0176 0192 0178 0179 0180 1529 0182 0194 - - - - 0185 Troughs

1722 17
18
0188
Systems

19
0189

620 0872 0176 0192 - 0874 0180 - 0182 0851 - - - - 0185 (M6x18)
MARATHON
ALLROUND
ELTOLA

621 0872 0176 0192 - 0874 0180 - 0182 0851 - - - - 0185

625 0872 0176 0192 - 0874 0180 - - - 0957 0956 - - 0185
628 0872 0176 0192 - 0874 0180 - 0182 0851 - - - - 0185
Materials
Informations

01/2023 93
 Content
SLE PART NUMBERS
special material parts like Ul94 V-0, EX or
SLE parts 87 other have to be named in the order

11 24

Design guidelines
SLE PZ PTF PT 55 PT 75 LS ZL ZLA8 ZLS10 ZHS10 pipe stay

Order infos
120 0691 0112 - - - 1665 1273 1159 1160 1407 D6 739
121 0691 0112 - - - 1665 1273 1159 1160 1407 D6 739
128 0691 0112 - - - 1665 1273 1159 1160 1407 D6 739

Kolibri
PKK
220 0778 1519 0779 1658 1927 0879 0880 1665 1273 1159 1160 1407 D6 740
221 0778 1519 0779 1658 1927 0879 0880 1665 1273 1159 1160 1407 D6 740

SLE SLP SLA PLE PLP PLA

225 0778 1519 0779 1658 1927 0879 0880 1665 1273 1159 1160 1407 D6 740
228 0778 1519 0779 1658 1927 0879 0880 1665 1273 1159 1160 1407 D6 740

GKA
320 0163 1678 1659 1660 1927 0879 0880 1665 1273 1159 1160 1407 D8 741
321 0163 1678 1659 1660 1927 0879 0880 1665 1273 1159 1160 1407 D8 741
325 0163 1678 1659 1660 1927 0879 0880 1665 1273 1159 1160 1407 D8 741

SFK
328 0163 1678 1659 1660 1927 0879 0880 1665 1273 1159 1160 1407 D8 741

PFR
520 0719 1679 1661 1662 1680 1927 0879 0880 1665 1675 1159 1160 1407 D8 742
521 0719 1679 1661 1662 1680 1927 0879 0880 1665 1675 1159 1160 1407 D8 742
525 0719 1679 1661 1662 1680 1927 0879 0880 1665 1675 1159 1160 1407 D8 742 Troughs

528 0719 1679 1661 1662 1680 1927 0879 0880 1665 1675 1159 1160 1407 D8 742
Systems
MARATHON
ALLROUND
ELTOLA

620 1257 1778 1980 2228 - - - - - 1612 1159 1160 1407 D8 742
621 1257 1778 1980 2228 - - - - - 1612 1159 1160 1407 D8 742
625 1257 1778 1980 2228 - - - - - 1612 1159 1160 1407 D8 742
Materials

628 1257 1778 1980 2228 - - - - - 1612 1159 1160 1407 D8 742
Informations

94 01/2023
 Content
SLE PART NUMBERS
plastic inserts SLE parts 87

Design guidelines
diameter in mm
SLE 10 15 20 25 30 35 40 45 50 55 60 65 70

Order infos
120 - - - - - - - - - - - - -
121 - - - - - - - - - - - - -
128 - - - - - - - - - - - - -

Kolibri
PKK
220 0649 0650 0651 0652 0653 - - - - - - - -
221 0649 0650 0651 0652 0653 - - - - - - - -

SLE SLP SLA PLE PLP PLA

225 0649 0650 0651 0652 0653 - - - - - - - -
228 0649 0650 0651 0652 0653 - - - - - - - -

GKA
320 0654 0655 0656 0657 0658 0659 0660 0661 0662 - - - -
321 0654 0655 0656 0657 0658 0659 0660 0661 0662 - - - -
325 0654 0655 0656 0657 0658 0659 0660 0661 0662 - - - -

SFK
328 0654 0655 0656 0657 0658 0659 0660 0661 0662 - - - -

PFR
520 1628 0663 0664 0665 0666 0667 0668 0669 0670 0671 0672 0714 0715
521 1628 0663 0664 0665 0666 0667 0668 0669 0670 0671 0672 0714 0715
525 1628 0663 0664 0665 0666 0667 0668 0669 0670 0671 0672 0714 0715 Troughs

528 1628 0663 0664 0665 0666 0667 0668 0669 0670 0671 0672 0714 0715
Systems
MARATHON
ALLROUND
ELTOLA

620 - - - - - - - - - - - - -
621 - - - - - - - - - - - - -
625 - - - - - - - - - - - - -
Materials

628 - - - - - - - - - - - - -
Informations

01/2023 95
 Content
SLE PART NUMBERS
SLE parts 87
special material parts like Ul94 V-0, EX or

Design guidelines
other have to be named in the order

SLE plastic- aluminium foam sliders flange rollers

insert profile insert profile (complete)

Order infos
120 - - -
121 - - -
128 - - - 1443

H=3,5

Kolibri
PKK
220 0 827 1649 - 0132
221 0 827 1649 - 0132

SLE SLP SLA PLE PLP PLA

225 0 827 1649 - 0132
228 0 827 1649 - 1444 -
<R200
H=7,5 1970
>
- R200

H=9,5
320 1646 1650 2365 1445 1448 0162

GKA
321 1646 1650 2365 0162
325 1646 1650 2365 0162
328 1646 1650 2365 1955 1968 -

SFK
(Standard)

PFR
520 1647 1651 2365 0190
521 1647 1651 2365 0190
525 1647 1651 2365 1446 1987 0190
528 1647 1651 2365 H=9 H=15 - Troughs
Systems

620 1648 1652 - 0190

MARATHON
ALLROUND
ELTOLA

621 1648 1652 - 1447 (R400) 0190

02
6 15
90 1648 1652 - 2070 (R300)
628 1648 1652 - -
Materials

H=9
Informations

96 01/2023
 Content
SLE PART NUMBERS
15
SLE parts 87

Design guidelines
SLE damping element screw nut double bolt glide disc
St vz VA
D45 d13

Order infos
120 0694 0693 0969 (compl.)
121 0694 0693 0969 (compl.)
128 0694 0693 0969 (compl.)

Kolibri
D

PKK
D55 d15 D70 d20
d
220 2136 0826 0825 0123 0138 0128 0963 ckompl.) 0129 0964 (compl.)
221 2136 0826 0825 0123 0138 0128 0963 (compl.) 0129 0964 (compl.)

SLE SLP SLA PLE PLP PLA

225 2136 0826 0825 0123 0138 0128 0963 (compl.) 0129 0964 (compl.)
228 2136 0826 0825 0123 0138 0128 0963 (compl.) 0129 0964 (compl.)

D80 d19 D95 d25

320 0819 2136 0826 0825 0153 1718 0158 0965 (compl.) 0159 0966 (compl.)

GKA
321 0819 2136 0826 0825 0153 1718 0158 0965 (compl.) 0159 0966 (compl.)
325 - 2136 0826 0825 0153 1718 0158 0965 (compl.) 0159 0966 (compl.)
328 0819 2136 0826 0825 0153 1718 0158 0965 (compl.) 0159 0966 (compl.)

SFK
PFR
D105 d25 D120 d30
520 2025 2136 0181 0186 0967(compl.) 0187 0968 1575 (br. )
521 2025 2136 0181 0186 0967(compl.) 0187 0968 1575 (br. )
525 - 2136 0181 0186 0967(compl.) 0187 0968 1575 (br. )
528 2025 2136 0181 0186 0967(compl.) 0187 0968 1575 (br. ) Troughs
Systems

D155 D170
d30 d30
620 2025 2136 1538 1539
MARATHON
ALLROUND
ELTOLA

621 2025 2136 1538 1539

625 1999/2000 1538 1539
628 2025 2136
A E ØP Rmin 1538 1539
Materials

SLE 220 20 36,5 70 40

15 31,5 55
SLE 320 25 48 95 52,5
19 42 80
SLE 520 30 61 120 65
Informations

25 55 105

01/2023 97