SOLENOID VALVES 3/2

Series
direct operated 2

multiple manifold sub-bases NC 356

3 1
1/8
FEATURES
• Very small size and easy assembly
• AC/DC interchangeability of the solenoid without disassembling the valve
• Quick disassembly of core tube for easy maintenance of internal parts
• Standard disc seal made of FPM suitable for a wide range of operating tempera-
tures and compatible with many fluids
• Compliance with UL and CSA standards
• The solenoid valves satisfy all relevant EU directives
GENERAL
Differential pressure See «SPECIFICATIONS» [1 bar =100 kPa]
Maximum viscosity 40 cSt (mm2/s)
Response time 5 - 10 ms
fluids () temperature range (TS) seal materials ()
air, inert gas, water, oil - 10°C to + 100°C FPM (fluoroelastomer)

MATERIALS IN CONTACT WITH FLUID UL

() Ensure that the compatibility of the fluids in contact with the materials is verified
Manifold body Brass
Core tube Stainless steel
Core and plugnut Stainless steel
Springs Stainless steel
Seat Brass 3
Seals FPM
Disc FPM
Shading coil Copper
ELECTRICAL CHARACTERISTICS

E
Coil insulation class F
Connector Spade plug (cable Ø 6-7 mm)
Connector specification DIN 43650, 11 mm, industry standard B (11 mm)
Electrical safety IEC 335
Electrical enclosure protection Moulded IP65 (EN 60529)
Standard voltages (2) DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz 2
power ratings operator 1
ambient replacement coil
prefix inrush holding hot/cold temperature type (1)
option ~ ~ = range (TS) ~ =
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
SC 12 6 4 5 / 6,9 -10 to + 60 400127-197 400127-142 01
(1)
Refer to the dimensional drawings on the following page.
 (2)
Duty cycle: 50% (30 min)

SPECIFICATIONS
operating pressure options
differential (bar)
flow
Number of valves

pipe orifice power coil catalogue

coefficient max. (PS)
size size (W) number
Kv
min. air, water () oil ()
EPDM
Availability, design and specifications are subject to change without notice. All rights reserved.

G (mm) (m3/h) (l/min) ~ = ~ = ~ = ~/=

NC - Normally closed
2 SCG356B819V E - -
3 SCG356B820V E - -
4 SCG356B821V E - -
5 SCG356B822V E - -
1,6 0,08 1,33 0 10 10 10 10 4 6,9 6 SCG356B823V E - -
7 SCG356B824V E - -
8 SCG356B825V E - -
9 SCG356B826V E - -
10 SCG356B827V E - -
1/8 (3)
2 SCG356B855V E - -
3 SCG356B856V E - -
4 SCG356B857V E - -
5 SCG356B858V E - -
2,4 0,13 2,16 0 4 4 4 4 4 6,9 6 SCG356B859V E - -
7 SCG356B860V E - -
8 SCG356B861V E - -
9 SCG356B862V E - -
00072GB-2016/R02

10 SCG356B863V E - -
(3)
Pipe size port 3: M5

All leaflets are available on: www.asco.com

V591-1
 SOLENOID VALVES SERIES 356
OPTIONS
• Valves can also be supplied with EPDM (ethylene-propylene) seals and discs. Use the appropriate optional suffix letter for
identification
• Flying leads coil, use prefix L (e.g.: LG356B822V)
• Oxygen service with seals and disc in FPM, suffix NV, example: SCG356B858NV
• NC, orifice sizes 1,2 mm and 2 mm
• U, orifice sizes 1,6 - 2 - 2,4 mm ; NO, orifice size 1,6 mm
• Stainless steel manifold bodies, NC, U and NO, on request
• Other pipe connections are available on request
• Plug with visual indication and peak voltage suppression or with cable length of 2 m (see Solenoids, Coils & Accessories section)
INSTALLATION
• The solenoid valves can be mounted in any position without affecting operation
• Multiple manifold solenoid valves have 2 mounting holes in body
• Pipe connection identifier is G = G (ISO 228/1)
• Installation/maintenance instructions are included with each valve
SPARE PARTS KIT ORDERING EXAMPLES:
spare parts kit no. SC G 356 B 821 V 230V / 50 Hz
catalogue number
~ = SC G 356 B 826 E 115V / 50 Hz
all C140264V C140264V SC G 356 B 857 NV 24V / DC
(1)
Standard prefixes/suffixes are also applicable to kits. SC G 356 B 863 V 230V / 50 Hz

prefix
pipe thread voltage
basic number suffix

ORDERING EXAMPLES KITS:

C140264 V(1)
C140264 E

basic number suffix

DIMENSIONS (mm), WEIGHT (kg)

TYPE 01
Prefix “SC” Solenoid
Epoxy moulded
Integrated in manifold
IEC 335 / DIN 43650, IP65

18 = X - 36 18

63 5
27,5 Availability, design and specifications are subject to change without notice. All rights reserved.
2 x Ø M4
16,5 22
3 ...
3 M5

1/8
75
61,4
M5
2 2 2 2 2 2 2 2 2 2 2
27
14
1 8 8
1 1
12,5 4,5 24 11
25 X = [(n -1) x 24] + 22

weight (2)
00072GB--2016/R01

prefix
type number of solenoid valves (n)
option
2 3 4 5 6 7 8 9 10
01 SC 0,321 0,426 0,531 0,636 0,741 0,846 0,951 1,056 1,161
(2)
Incl. coil(s) and connector(s)

All leaflets are available on: www.asco.com

V591-2